mirror of
https://github.com/nxp-imx/mwifiex.git
synced 2024-11-19 16:41:44 +00:00
33d9f8e4f3
Add initial MxM (multi-chip-multi-interface) wifi driver. The driver target is to support 88w8987/88w8997/88w9098, currently it only supports 88w8987. The MxM wifi driver is merged from below repo and applied some patches for block and build issues. ssh://git@bitbucket.sw.nxp.com/wcswrel/ rel-nxp-wifi-fp92-bt-fp85-linux-android-mxm4x17169-gpl.git The sdk only includes application, the driver already is merged into linux kernel. Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
80 lines
4.7 KiB
Text
80 lines
4.7 KiB
Text
# File : uaputl_wifidirect.conf
|
|
|
|
|
|
ap_config={
|
|
SSID="DIRECT-" # SSID for WifiDirect
|
|
BeaconPeriod=100 # Beacon period in TU
|
|
Channel=6 # Radio Channel 6
|
|
# Channel=0,1 # auto channel select (MCS mode)
|
|
# Channel=6,2 # primary channel 6, secondary channel above.
|
|
# Channel=6,4 # primary channel 6, secondary channel below
|
|
ChanList=1,6,11 # Scan channel list
|
|
# AP_MAC=00:34:22:77:46:41 # MAC address of AP
|
|
Rate=0x8C,0x12,0x18,0x24,0x30,0x48,0x60,0x6c
|
|
# Set of data rate that a station
|
|
# in the BSS may use
|
|
# (in unit of 500 kilobit/s)
|
|
TxPowerLevel=13 # Transmit power level in dBm
|
|
BroadcastSSID=1 # Broadcast SSID feature
|
|
# 1: Enable 0:Disable
|
|
RTSThreshold=2347 # RTS threshold value
|
|
FragThreshold=2346 # Fragmentation threshold value
|
|
DTIMPeriod=1 # DTIM period in beacon periods
|
|
MCBCdataRate=0 # MCBC rate to use for packet transmission
|
|
# 0:auto
|
|
# >0 fix rate (in unit of 500 kilobit/s)
|
|
PktFwdCtl=1 # Packet forwarding control
|
|
# 0: forward all packets to the host
|
|
# 1: firmware handles intr-BSS packets
|
|
StaAgeoutTimer=1800 # Inactive client station age out timer value
|
|
# in units of 100ms
|
|
PSStaAgeoutTimer=400 # Inactive client PS station age out timer value
|
|
# in units of 100ms
|
|
MaxStaNum=7 # Max number of stations allowed to connect
|
|
Retrylimit=7 # Retry limit to use for packet transmissions
|
|
AuthMode=0 # 0:Open authentication
|
|
# 1:shared key authentication
|
|
Protocol=32 # protocol to use
|
|
# 1: No security 2: Static WEP
|
|
# 8: WPA 32: WPA2 40:WPA2 Mixed Mode
|
|
RSNReplayProtection=0 # RSN replay protection 0: disabled, 1: enabled
|
|
PairwiseUpdateTimeout=2000 #Pairwise Handshake update timeout: 2000ms
|
|
PairwiseHandshakeRetries=3 #Pairwise Handshake retries: 3
|
|
GroupwiseUpdateTimeout=2000 #Groupwise Handshake update timeout: 2000ms
|
|
GroupwiseHandshakeRetries=3 #Groupwise Handshake retries: 3
|
|
|
|
PwkCipherWPA2=8 # Pairwise cipher type
|
|
GwkCipher=8 # group cipher type
|
|
PSK="1234567890" # WPA/WPA2 passphrase
|
|
|
|
GroupRekeyTime= 86400 # Group key re-key interval, in second.
|
|
# 0 mean never re-key
|
|
|
|
Enable11n=1 # 1 to enable, 0 to disable
|
|
HTCapInfo=0x111c # HTCapInfo
|
|
# Bit 15-13: Reserved set to 0
|
|
# Bit 12: DSS/CCK mode in 40MHz enable/disable
|
|
# Bit 11-10: Reserved set to 0
|
|
# Bit 9-8: Reserved set to 0x01
|
|
# Bit 7: Reserved set to 0
|
|
# Bit 6: Short GI in 40 Mhz enable/disable
|
|
# Bit 5: Short GI in 20 Mhz enable/disable
|
|
# Bit 4: Green field enable/disble
|
|
# Bit 3-2: Reserved set to 1
|
|
# Bit 1: 20/40 Mhz enable disable.
|
|
# Bit 0: Reserved set to 0
|
|
AMPDU=0x03 # AMPDU
|
|
# Bit 7-5: Reserved set to 0
|
|
# Bit 4-2: Minimum MPDU Start spacing
|
|
# Set to 0 for no restriction
|
|
# Set to 1 for 1/4 us
|
|
# Set to 2 for 1/2 us
|
|
# Set to 3 for 1 us
|
|
# Set to 4 for 2 us
|
|
# Set to 5 for 4 us
|
|
# Set to 6 for 8 us
|
|
# Set to 7 for 16 us
|
|
# Bit 1-0: Max A-MPDU length
|
|
#802.11D specific configuration
|
|
11d_enable=0 # 0-disable 1-enable
|
|
}
|