mirror of
https://github.com/nxp-imx/mwifiex.git
synced 2024-11-15 03:25:35 +00:00
e057e875ba
New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
359 lines
11 KiB
C
359 lines
11 KiB
C
/** @file mlan_sta_tx.c
|
|
*
|
|
* @brief This file contains the handling of data packet
|
|
* transmission in MLAN module.
|
|
*
|
|
*
|
|
* Copyright 2008-2021 NXP
|
|
*
|
|
* This software file (the File) is distributed by NXP
|
|
* under the terms of the GNU General Public License Version 2, June 1991
|
|
* (the License). You may use, redistribute and/or modify the File in
|
|
* accordance with the terms and conditions of the License, a copy of which
|
|
* is available by writing to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
|
|
* worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
|
|
*
|
|
* THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
|
|
* this warranty disclaimer.
|
|
*
|
|
*/
|
|
|
|
/********************************************************
|
|
Change log:
|
|
10/21/2008: initial version
|
|
********************************************************/
|
|
|
|
#include "mlan.h"
|
|
#include "mlan_join.h"
|
|
#include "mlan_util.h"
|
|
#include "mlan_fw.h"
|
|
#include "mlan_main.h"
|
|
#include "mlan_wmm.h"
|
|
|
|
/********************************************************
|
|
Local Variables
|
|
********************************************************/
|
|
|
|
/********************************************************
|
|
Global Variables
|
|
********************************************************/
|
|
|
|
/********************************************************
|
|
Local Functions
|
|
********************************************************/
|
|
|
|
/********************************************************
|
|
Global functions
|
|
********************************************************/
|
|
/**
|
|
* @brief This function fill the txpd for tx packet
|
|
*
|
|
* @param priv A pointer to mlan_private structure
|
|
* @param pmbuf A pointer to the mlan_buffer for process
|
|
*
|
|
* @return headptr or MNULL
|
|
*/
|
|
t_void *wlan_ops_sta_process_txpd(t_void *priv, pmlan_buffer pmbuf)
|
|
{
|
|
mlan_private *pmpriv = (mlan_private *)priv;
|
|
pmlan_adapter pmadapter = pmpriv->adapter;
|
|
TxPD *plocal_tx_pd;
|
|
t_u8 *head_ptr = MNULL;
|
|
t_u32 pkt_type;
|
|
t_u32 tx_control;
|
|
|
|
ENTER();
|
|
|
|
if (!pmbuf->data_len) {
|
|
PRINTM(MERROR, "STA Tx Error: Invalid packet length: %d\n",
|
|
pmbuf->data_len);
|
|
pmbuf->status_code = MLAN_ERROR_PKT_SIZE_INVALID;
|
|
goto done;
|
|
}
|
|
if (pmbuf->buf_type == MLAN_BUF_TYPE_RAW_DATA) {
|
|
memcpy_ext(pmpriv->adapter, &pkt_type,
|
|
pmbuf->pbuf + pmbuf->data_offset, sizeof(pkt_type),
|
|
sizeof(pkt_type));
|
|
memcpy_ext(pmpriv->adapter, &tx_control,
|
|
pmbuf->pbuf + pmbuf->data_offset + sizeof(pkt_type),
|
|
sizeof(tx_control), sizeof(tx_control));
|
|
pmbuf->data_offset += sizeof(pkt_type) + sizeof(tx_control);
|
|
pmbuf->data_len -= sizeof(pkt_type) + sizeof(tx_control);
|
|
}
|
|
|
|
if (pmbuf->data_offset <
|
|
(sizeof(TxPD) + pmpriv->intf_hr_len + DMA_ALIGNMENT)) {
|
|
PRINTM(MERROR,
|
|
"not enough space for TxPD: headroom=%d pkt_len=%d, required=%d\n",
|
|
pmbuf->data_offset, pmbuf->data_len,
|
|
sizeof(TxPD) + pmpriv->intf_hr_len + DMA_ALIGNMENT);
|
|
pmbuf->status_code = MLAN_ERROR_PKT_SIZE_INVALID;
|
|
goto done;
|
|
}
|
|
|
|
/* head_ptr should be aligned */
|
|
head_ptr = pmbuf->pbuf + pmbuf->data_offset - sizeof(TxPD) -
|
|
pmpriv->intf_hr_len;
|
|
head_ptr = (t_u8 *)((t_ptr)head_ptr & ~((t_ptr)(DMA_ALIGNMENT - 1)));
|
|
|
|
plocal_tx_pd = (TxPD *)(head_ptr + pmpriv->intf_hr_len);
|
|
memset(pmadapter, plocal_tx_pd, 0, sizeof(TxPD));
|
|
/* Set the BSS number to TxPD */
|
|
plocal_tx_pd->bss_num = GET_BSS_NUM(pmpriv);
|
|
plocal_tx_pd->bss_type = pmpriv->bss_type;
|
|
plocal_tx_pd->tx_pkt_length = (t_u16)pmbuf->data_len;
|
|
|
|
plocal_tx_pd->priority = (t_u8)pmbuf->priority;
|
|
plocal_tx_pd->pkt_delay_2ms =
|
|
wlan_wmm_compute_driver_packet_delay(pmpriv, pmbuf);
|
|
|
|
if (plocal_tx_pd->priority <
|
|
NELEMENTS(pmpriv->wmm.user_pri_pkt_tx_ctrl))
|
|
/*
|
|
* Set the priority specific tx_control field, setting of 0 will
|
|
* cause the default value to be used later in this function
|
|
*/
|
|
plocal_tx_pd->tx_control =
|
|
pmpriv->wmm.user_pri_pkt_tx_ctrl[plocal_tx_pd->priority];
|
|
if (pmadapter->pps_uapsd_mode) {
|
|
if (MTRUE == wlan_check_last_packet_indication(pmpriv)) {
|
|
pmadapter->tx_lock_flag = MTRUE;
|
|
plocal_tx_pd->flags =
|
|
MRVDRV_TxPD_POWER_MGMT_LAST_PACKET;
|
|
}
|
|
}
|
|
if (pmbuf->flags & MLAN_BUF_FLAG_TDLS)
|
|
plocal_tx_pd->flags |= MRVDRV_TxPD_FLAGS_TDLS_PACKET;
|
|
/* Offset of actual data */
|
|
plocal_tx_pd->tx_pkt_offset = (t_u16)(
|
|
(t_ptr)pmbuf->pbuf + pmbuf->data_offset - (t_ptr)plocal_tx_pd);
|
|
|
|
if (!plocal_tx_pd->tx_control) {
|
|
/* TxCtrl set by user or default */
|
|
plocal_tx_pd->tx_control = pmpriv->pkt_tx_ctrl;
|
|
}
|
|
|
|
if (pmbuf->buf_type == MLAN_BUF_TYPE_RAW_DATA) {
|
|
plocal_tx_pd->tx_pkt_type = (t_u16)pkt_type;
|
|
plocal_tx_pd->tx_control = tx_control;
|
|
}
|
|
|
|
if (pmbuf->flags & MLAN_BUF_FLAG_TX_STATUS) {
|
|
plocal_tx_pd->tx_control_1 |= pmbuf->tx_seq_num << 8;
|
|
plocal_tx_pd->flags |= MRVDRV_TxPD_FLAGS_TX_PACKET_STATUS;
|
|
}
|
|
if (pmbuf->flags & MLAN_BUF_FLAG_TX_CTRL) {
|
|
if (pmbuf->u.tx_info.data_rate) {
|
|
plocal_tx_pd->tx_control |=
|
|
(wlan_ieee_rateid_to_mrvl_rateid(
|
|
pmpriv, pmbuf->u.tx_info.data_rate,
|
|
MNULL)
|
|
<< 16);
|
|
plocal_tx_pd->tx_control |= TXPD_TXRATE_ENABLE;
|
|
}
|
|
plocal_tx_pd->tx_control_1 |= pmbuf->u.tx_info.channel << 21;
|
|
if (pmbuf->u.tx_info.bw) {
|
|
plocal_tx_pd->tx_control_1 |= pmbuf->u.tx_info.bw << 16;
|
|
plocal_tx_pd->tx_control_1 |= TXPD_BW_ENABLE;
|
|
}
|
|
if (pmbuf->u.tx_info.tx_power.tp.hostctl)
|
|
plocal_tx_pd->tx_control |=
|
|
(t_u32)pmbuf->u.tx_info.tx_power.val;
|
|
if (pmbuf->u.tx_info.retry_limit) {
|
|
plocal_tx_pd->tx_control |= pmbuf->u.tx_info.retry_limit
|
|
<< 8;
|
|
plocal_tx_pd->tx_control |= TXPD_RETRY_ENABLE;
|
|
}
|
|
}
|
|
if (pmbuf->flags & MLAN_BUF_FLAG_MC_AGGR_PKT) {
|
|
tx_ctrl *ctrl = (tx_ctrl *)&plocal_tx_pd->tx_control;
|
|
mc_tx_ctrl *mc_ctrl =
|
|
(mc_tx_ctrl *)&plocal_tx_pd->pkt_delay_2ms;
|
|
plocal_tx_pd->tx_pkt_type = PKT_TYPE_802DOT11_MC_AGGR;
|
|
if (pmbuf->u.mc_tx_info.mc_pkt_flags & MC_FLAG_START_CYCLE)
|
|
ctrl->mc_cycle_start = MTRUE;
|
|
else
|
|
ctrl->mc_cycle_start = MFALSE;
|
|
if (pmbuf->u.mc_tx_info.mc_pkt_flags & MC_FLAG_END_CYCLE)
|
|
ctrl->mc_cycle_end = MTRUE;
|
|
else
|
|
ctrl->mc_cycle_end = MFALSE;
|
|
if (pmbuf->u.mc_tx_info.mc_pkt_flags & MC_FLAG_START_AMPDU)
|
|
ctrl->mc_ampdu_start = MTRUE;
|
|
else
|
|
ctrl->mc_ampdu_start = MFALSE;
|
|
if (pmbuf->u.mc_tx_info.mc_pkt_flags & MC_FLAG_END_AMPDU)
|
|
ctrl->mc_ampdu_end = MTRUE;
|
|
else
|
|
ctrl->mc_ampdu_end = MFALSE;
|
|
if (pmbuf->u.mc_tx_info.mc_pkt_flags & MC_FLAG_RETRY)
|
|
ctrl->mc_pkt_retry = MTRUE;
|
|
else
|
|
ctrl->mc_pkt_retry = MFALSE;
|
|
ctrl->bw = pmbuf->u.mc_tx_info.bandwidth & 0x7;
|
|
ctrl->tx_rate = pmbuf->u.mc_tx_info.mcs_index & 0x1f;
|
|
mc_ctrl->abs_tsf_expirytime =
|
|
wlan_cpu_to_le32(pmbuf->u.mc_tx_info.pkt_expiry);
|
|
mc_ctrl->mc_seq = wlan_cpu_to_le16(pmbuf->u.mc_tx_info.seq_num);
|
|
}
|
|
endian_convert_TxPD(plocal_tx_pd);
|
|
|
|
/* Adjust the data offset and length to include TxPD in pmbuf */
|
|
pmbuf->data_len += pmbuf->data_offset;
|
|
pmbuf->data_offset = (t_u32)(head_ptr - pmbuf->pbuf);
|
|
pmbuf->data_len -= pmbuf->data_offset;
|
|
|
|
done:
|
|
LEAVE();
|
|
return head_ptr;
|
|
}
|
|
|
|
/**
|
|
* @brief This function tells firmware to send a NULL data packet.
|
|
*
|
|
* @param priv A pointer to mlan_private structure
|
|
* @param flags Transmit Pkt Flags
|
|
*
|
|
* @return MLAN_STATUS_SUCCESS/MLAN_STATUS_PENDING --success, otherwise
|
|
* failure
|
|
*/
|
|
mlan_status wlan_send_null_packet(pmlan_private priv, t_u8 flags)
|
|
{
|
|
pmlan_adapter pmadapter = MNULL;
|
|
TxPD *ptx_pd;
|
|
/* sizeof(TxPD) + Interface specific header */
|
|
#define NULL_PACKET_HDR 256
|
|
t_u32 data_len = NULL_PACKET_HDR;
|
|
pmlan_buffer pmbuf = MNULL;
|
|
t_u8 *ptr;
|
|
mlan_status ret = MLAN_STATUS_SUCCESS;
|
|
#ifdef DEBUG_LEVEL1
|
|
t_u32 sec = 0, usec = 0;
|
|
#endif
|
|
|
|
ENTER();
|
|
|
|
if (!priv) {
|
|
LEAVE();
|
|
return MLAN_STATUS_FAILURE;
|
|
}
|
|
pmadapter = priv->adapter;
|
|
|
|
if (pmadapter->surprise_removed == MTRUE) {
|
|
ret = MLAN_STATUS_FAILURE;
|
|
goto done;
|
|
}
|
|
|
|
if (priv->media_connected == MFALSE) {
|
|
ret = MLAN_STATUS_FAILURE;
|
|
goto done;
|
|
}
|
|
|
|
if (pmadapter->data_sent == MTRUE) {
|
|
ret = MLAN_STATUS_FAILURE;
|
|
goto done;
|
|
}
|
|
|
|
pmbuf = wlan_alloc_mlan_buffer(pmadapter, data_len, 0,
|
|
MOAL_MALLOC_BUFFER);
|
|
if (!pmbuf) {
|
|
ret = MLAN_STATUS_FAILURE;
|
|
goto done;
|
|
}
|
|
memset(pmadapter, pmbuf->pbuf, 0, data_len);
|
|
pmbuf->bss_index = priv->bss_index;
|
|
pmbuf->buf_type = MLAN_BUF_TYPE_DATA;
|
|
pmbuf->flags |= MLAN_BUF_FLAG_NULL_PKT;
|
|
ptr = pmbuf->pbuf + pmbuf->data_offset;
|
|
pmbuf->data_len = sizeof(TxPD) + priv->intf_hr_len;
|
|
ptx_pd = (TxPD *)(ptr + priv->intf_hr_len);
|
|
ptx_pd->tx_control = priv->pkt_tx_ctrl;
|
|
ptx_pd->flags = flags;
|
|
ptx_pd->priority = WMM_HIGHEST_PRIORITY;
|
|
ptx_pd->tx_pkt_offset = sizeof(TxPD);
|
|
/* Set the BSS number to TxPD */
|
|
ptx_pd->bss_num = GET_BSS_NUM(priv);
|
|
ptx_pd->bss_type = priv->bss_type;
|
|
|
|
endian_convert_TxPD(ptx_pd);
|
|
|
|
ret = pmadapter->ops.host_to_card(priv, MLAN_TYPE_DATA, pmbuf, MNULL);
|
|
|
|
switch (ret) {
|
|
#ifdef USB
|
|
case MLAN_STATUS_PRESOURCE:
|
|
PRINTM(MINFO, "MLAN_STATUS_PRESOURCE is returned\n");
|
|
break;
|
|
#endif
|
|
case MLAN_STATUS_RESOURCE:
|
|
wlan_free_mlan_buffer(pmadapter, pmbuf);
|
|
PRINTM(MERROR, "STA Tx Error: Failed to send NULL packet!\n");
|
|
pmadapter->dbg.num_tx_host_to_card_failure++;
|
|
goto done;
|
|
case MLAN_STATUS_FAILURE:
|
|
wlan_free_mlan_buffer(pmadapter, pmbuf);
|
|
PRINTM(MERROR, "STA Tx Error: Failed to send NULL packet!\n");
|
|
pmadapter->dbg.num_tx_host_to_card_failure++;
|
|
goto done;
|
|
case MLAN_STATUS_SUCCESS:
|
|
wlan_free_mlan_buffer(pmadapter, pmbuf);
|
|
PRINTM(MINFO, "STA Tx: Successfully send the NULL packet\n");
|
|
pmadapter->tx_lock_flag = MTRUE;
|
|
break;
|
|
case MLAN_STATUS_PENDING:
|
|
pmadapter->tx_lock_flag = MTRUE;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
PRINTM_GET_SYS_TIME(MDATA, &sec, &usec);
|
|
PRINTM_NETINTF(MDATA, priv);
|
|
PRINTM(MDATA, "%lu.%06lu : Null data => FW\n", sec, usec);
|
|
DBG_HEXDUMP(MDAT_D, "Null data", ptr, sizeof(TxPD) + priv->intf_hr_len);
|
|
done:
|
|
LEAVE();
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @brief This function checks if we need to send last packet indication.
|
|
*
|
|
* @param priv A pointer to mlan_private structure
|
|
*
|
|
* @return MTRUE or MFALSE
|
|
*/
|
|
t_u8 wlan_check_last_packet_indication(pmlan_private priv)
|
|
{
|
|
pmlan_adapter pmadapter = priv->adapter;
|
|
t_u8 ret = MFALSE;
|
|
t_u8 prop_ps = MTRUE;
|
|
|
|
ENTER();
|
|
|
|
if (!pmadapter->sleep_period.period) {
|
|
LEAVE();
|
|
return ret;
|
|
}
|
|
if (wlan_bypass_tx_list_empty(pmadapter) &&
|
|
wlan_wmm_lists_empty(pmadapter)) {
|
|
if (((priv->curr_bss_params.wmm_uapsd_enabled == MTRUE) &&
|
|
priv->wmm_qosinfo) ||
|
|
prop_ps)
|
|
|
|
ret = MTRUE;
|
|
}
|
|
if (ret && !pmadapter->cmd_sent && !pmadapter->curr_cmd &&
|
|
!wlan_is_cmd_pending(pmadapter)) {
|
|
pmadapter->delay_null_pkt = MFALSE;
|
|
ret = MTRUE;
|
|
} else {
|
|
ret = MFALSE;
|
|
pmadapter->delay_null_pkt = MTRUE;
|
|
}
|
|
LEAVE();
|
|
return ret;
|
|
}
|