mirror of
https://github.com/nxp-imx/mwifiex.git
synced 2024-11-14 19:15:35 +00:00
e057e875ba
New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
878 lines
27 KiB
C
878 lines
27 KiB
C
/** @file mlan_uap_txrx.c
|
|
*
|
|
* @brief This file contains AP mode transmit and receive functions
|
|
*
|
|
*
|
|
* Copyright 2009-2021 NXP
|
|
*
|
|
* This software file (the File) is distributed by NXP
|
|
* under the terms of the GNU General Public License Version 2, June 1991
|
|
* (the License). You may use, redistribute and/or modify the File in
|
|
* accordance with the terms and conditions of the License, a copy of which
|
|
* is available by writing to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
|
|
* worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
|
|
*
|
|
* THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
|
|
* this warranty disclaimer.
|
|
*
|
|
*/
|
|
|
|
/********************************************************
|
|
Change log:
|
|
02/05/2009: initial version
|
|
********************************************************/
|
|
|
|
#include "mlan.h"
|
|
#include "mlan_util.h"
|
|
#include "mlan_fw.h"
|
|
#ifdef STA_SUPPORT
|
|
#include "mlan_join.h"
|
|
#endif
|
|
#include "mlan_main.h"
|
|
#include "mlan_uap.h"
|
|
#include "mlan_wmm.h"
|
|
#include "mlan_11n_aggr.h"
|
|
#include "mlan_11n_rxreorder.h"
|
|
#ifdef DRV_EMBEDDED_AUTHENTICATOR
|
|
#include "authenticator_api.h"
|
|
#endif
|
|
|
|
/********************************************************
|
|
Local Functions
|
|
********************************************************/
|
|
|
|
/**
|
|
* @brief This function processes received packet and forwards it
|
|
* to kernel/upper layer
|
|
*
|
|
* @param pmadapter A pointer to mlan_adapter
|
|
* @param pmbuf A pointer to mlan_buffer which includes the received packet
|
|
*
|
|
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
|
|
*/
|
|
static mlan_status wlan_upload_uap_rx_packet(pmlan_adapter pmadapter,
|
|
pmlan_buffer pmbuf)
|
|
{
|
|
mlan_status ret = MLAN_STATUS_SUCCESS;
|
|
#ifdef DEBUG_LEVEL1
|
|
pmlan_private priv = pmadapter->priv[pmbuf->bss_index];
|
|
#endif
|
|
PRxPD prx_pd;
|
|
ENTER();
|
|
prx_pd = (RxPD *)(pmbuf->pbuf + pmbuf->data_offset);
|
|
|
|
/* Chop off RxPD */
|
|
pmbuf->data_len -= prx_pd->rx_pkt_offset;
|
|
pmbuf->data_offset += prx_pd->rx_pkt_offset;
|
|
pmbuf->pparent = MNULL;
|
|
|
|
DBG_HEXDUMP(MDAT_D, "uAP RxPD", (t_u8 *)prx_pd,
|
|
MIN(sizeof(RxPD), MAX_DATA_DUMP_LEN));
|
|
DBG_HEXDUMP(MDAT_D, "uAP Rx Payload",
|
|
((t_u8 *)prx_pd + prx_pd->rx_pkt_offset),
|
|
MIN(prx_pd->rx_pkt_length, MAX_DATA_DUMP_LEN));
|
|
|
|
pmadapter->callbacks.moal_get_system_time(pmadapter->pmoal_handle,
|
|
&pmbuf->out_ts_sec,
|
|
&pmbuf->out_ts_usec);
|
|
PRINTM_NETINTF(MDATA, priv);
|
|
PRINTM(MDATA, "%lu.%06lu : Data => kernel seq_num=%d tid=%d\n",
|
|
pmbuf->out_ts_sec, pmbuf->out_ts_usec, prx_pd->seq_num,
|
|
prx_pd->priority);
|
|
ret = pmadapter->callbacks.moal_recv_packet(pmadapter->pmoal_handle,
|
|
pmbuf);
|
|
if (ret == MLAN_STATUS_FAILURE) {
|
|
PRINTM(MERROR,
|
|
"uAP Rx Error: moal_recv_packet returned error\n");
|
|
pmbuf->status_code = MLAN_ERROR_PKT_INVALID;
|
|
}
|
|
|
|
if (ret != MLAN_STATUS_PENDING)
|
|
pmadapter->ops.data_complete(pmadapter, pmbuf, ret);
|
|
#ifdef USB
|
|
else if (IS_USB(pmadapter->card_type))
|
|
pmadapter->callbacks.moal_recv_complete(pmadapter->pmoal_handle,
|
|
MNULL,
|
|
pmadapter->rx_data_ep,
|
|
ret);
|
|
#endif
|
|
LEAVE();
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @brief This function will check if unicast packet need be dropped
|
|
*
|
|
* @param priv A pointer to mlan_private
|
|
* @param mac mac address to find in station list table
|
|
*
|
|
* @return MLAN_STATUS_FAILURE -- drop packet, otherwise forward to
|
|
* network stack
|
|
*/
|
|
static mlan_status wlan_check_unicast_packet(mlan_private *priv, t_u8 *mac)
|
|
{
|
|
int j;
|
|
sta_node *sta_ptr = MNULL;
|
|
pmlan_adapter pmadapter = priv->adapter;
|
|
pmlan_private pmpriv = MNULL;
|
|
t_u8 pkt_type = 0;
|
|
mlan_status ret = MLAN_STATUS_SUCCESS;
|
|
ENTER();
|
|
for (j = 0; j < MLAN_MAX_BSS_NUM; ++j) {
|
|
pmpriv = pmadapter->priv[j];
|
|
if (pmpriv) {
|
|
if (GET_BSS_ROLE(pmpriv) == MLAN_BSS_ROLE_STA)
|
|
continue;
|
|
sta_ptr = wlan_get_station_entry(pmpriv, mac);
|
|
if (sta_ptr) {
|
|
if (pmpriv == priv)
|
|
pkt_type = PKT_INTRA_UCAST;
|
|
else
|
|
pkt_type = PKT_INTER_UCAST;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
if ((pkt_type == PKT_INTRA_UCAST) &&
|
|
(priv->pkt_fwd & PKT_FWD_INTRA_UCAST)) {
|
|
PRINTM(MDATA, "Drop INTRA_UCAST packet\n");
|
|
ret = MLAN_STATUS_FAILURE;
|
|
} else if ((pkt_type == PKT_INTER_UCAST) &&
|
|
(priv->pkt_fwd & PKT_FWD_INTER_UCAST)) {
|
|
PRINTM(MDATA, "Drop INTER_UCAST packet\n");
|
|
ret = MLAN_STATUS_FAILURE;
|
|
}
|
|
LEAVE();
|
|
return ret;
|
|
}
|
|
/********************************************************
|
|
Global Functions
|
|
********************************************************/
|
|
/**
|
|
* @brief This function fill the txpd for tx packet
|
|
*
|
|
* @param priv A pointer to mlan_private structure
|
|
* @param pmbuf A pointer to the mlan_buffer for process
|
|
*
|
|
* @return headptr or MNULL
|
|
*/
|
|
t_void *wlan_ops_uap_process_txpd(t_void *priv, pmlan_buffer pmbuf)
|
|
{
|
|
pmlan_private pmpriv = (pmlan_private)priv;
|
|
TxPD *plocal_tx_pd;
|
|
t_u8 *head_ptr = MNULL;
|
|
t_u32 pkt_type;
|
|
t_u32 tx_control;
|
|
t_u8 dst_mac[MLAN_MAC_ADDR_LENGTH];
|
|
|
|
ENTER();
|
|
|
|
if (!pmbuf->data_len) {
|
|
PRINTM(MERROR, "uAP Tx Error: Invalid packet length: %d\n",
|
|
pmbuf->data_len);
|
|
pmbuf->status_code = MLAN_ERROR_PKT_SIZE_INVALID;
|
|
goto done;
|
|
}
|
|
if (pmbuf->buf_type == MLAN_BUF_TYPE_RAW_DATA) {
|
|
memcpy_ext(pmpriv->adapter, &pkt_type,
|
|
pmbuf->pbuf + pmbuf->data_offset, sizeof(pkt_type),
|
|
sizeof(pkt_type));
|
|
memcpy_ext(pmpriv->adapter, &tx_control,
|
|
pmbuf->pbuf + pmbuf->data_offset + sizeof(pkt_type),
|
|
sizeof(tx_control), sizeof(tx_control));
|
|
pmbuf->data_offset += sizeof(pkt_type) + sizeof(tx_control);
|
|
pmbuf->data_len -= sizeof(pkt_type) + sizeof(tx_control);
|
|
}
|
|
if (pmbuf->data_offset <
|
|
(sizeof(TxPD) + pmpriv->intf_hr_len + DMA_ALIGNMENT)) {
|
|
PRINTM(MERROR,
|
|
"not enough space for TxPD: headroom=%d pkt_len=%d, required=%d\n",
|
|
pmbuf->data_offset, pmbuf->data_len,
|
|
sizeof(TxPD) + pmpriv->intf_hr_len + DMA_ALIGNMENT);
|
|
DBG_HEXDUMP(MDAT_D, "drop pkt",
|
|
pmbuf->pbuf + pmbuf->data_offset, pmbuf->data_len);
|
|
pmbuf->status_code = MLAN_ERROR_PKT_SIZE_INVALID;
|
|
goto done;
|
|
}
|
|
|
|
/* head_ptr should be aligned */
|
|
head_ptr = pmbuf->pbuf + pmbuf->data_offset - sizeof(TxPD) -
|
|
pmpriv->intf_hr_len;
|
|
head_ptr = (t_u8 *)((t_ptr)head_ptr & ~((t_ptr)(DMA_ALIGNMENT - 1)));
|
|
|
|
plocal_tx_pd = (TxPD *)(head_ptr + pmpriv->intf_hr_len);
|
|
memset(pmpriv->adapter, plocal_tx_pd, 0, sizeof(TxPD));
|
|
|
|
/* Set the BSS number to TxPD */
|
|
plocal_tx_pd->bss_num = GET_BSS_NUM(pmpriv);
|
|
plocal_tx_pd->bss_type = pmpriv->bss_type;
|
|
|
|
plocal_tx_pd->tx_pkt_length = (t_u16)pmbuf->data_len;
|
|
|
|
plocal_tx_pd->priority = (t_u8)pmbuf->priority;
|
|
plocal_tx_pd->pkt_delay_2ms =
|
|
wlan_wmm_compute_driver_packet_delay(pmpriv, pmbuf);
|
|
|
|
if (plocal_tx_pd->priority <
|
|
NELEMENTS(pmpriv->wmm.user_pri_pkt_tx_ctrl))
|
|
/*
|
|
* Set the priority specific tx_control field, setting of 0 will
|
|
* cause the default value to be used later in this function
|
|
*/
|
|
plocal_tx_pd->tx_control =
|
|
pmpriv->wmm.user_pri_pkt_tx_ctrl[plocal_tx_pd->priority];
|
|
|
|
if (pmbuf->flags & MLAN_BUF_FLAG_TX_STATUS) {
|
|
plocal_tx_pd->tx_control_1 |= pmbuf->tx_seq_num << 8;
|
|
plocal_tx_pd->flags |= MRVDRV_TxPD_FLAGS_TX_PACKET_STATUS;
|
|
}
|
|
|
|
/* Offset of actual data */
|
|
plocal_tx_pd->tx_pkt_offset = (t_u16)(
|
|
(t_ptr)pmbuf->pbuf + pmbuf->data_offset - (t_ptr)plocal_tx_pd);
|
|
|
|
if (!plocal_tx_pd->tx_control) {
|
|
/* TxCtrl set by user or default */
|
|
plocal_tx_pd->tx_control = pmpriv->pkt_tx_ctrl;
|
|
}
|
|
|
|
if (pmbuf->buf_type == MLAN_BUF_TYPE_RAW_DATA) {
|
|
plocal_tx_pd->tx_pkt_type = (t_u16)pkt_type;
|
|
plocal_tx_pd->tx_control = tx_control;
|
|
}
|
|
|
|
if (pmbuf->flags & MLAN_BUF_FLAG_TX_CTRL) {
|
|
if (pmbuf->u.tx_info.data_rate) {
|
|
memcpy_ext(pmpriv->adapter, dst_mac,
|
|
pmbuf->pbuf + pmbuf->data_offset,
|
|
sizeof(dst_mac), sizeof(dst_mac));
|
|
plocal_tx_pd->tx_control |=
|
|
(wlan_ieee_rateid_to_mrvl_rateid(
|
|
pmpriv, pmbuf->u.tx_info.data_rate,
|
|
dst_mac)
|
|
<< 16);
|
|
plocal_tx_pd->tx_control |= TXPD_TXRATE_ENABLE;
|
|
}
|
|
plocal_tx_pd->tx_control_1 |= pmbuf->u.tx_info.channel << 21;
|
|
if (pmbuf->u.tx_info.bw) {
|
|
plocal_tx_pd->tx_control_1 |= pmbuf->u.tx_info.bw << 16;
|
|
plocal_tx_pd->tx_control_1 |= TXPD_BW_ENABLE;
|
|
}
|
|
if (pmbuf->u.tx_info.tx_power.tp.hostctl)
|
|
plocal_tx_pd->tx_control |=
|
|
(t_u32)pmbuf->u.tx_info.tx_power.val;
|
|
if (pmbuf->u.tx_info.retry_limit) {
|
|
plocal_tx_pd->tx_control |= pmbuf->u.tx_info.retry_limit
|
|
<< 8;
|
|
plocal_tx_pd->tx_control |= TXPD_RETRY_ENABLE;
|
|
}
|
|
}
|
|
if (pmbuf->flags & MLAN_BUF_FLAG_MC_AGGR_PKT) {
|
|
tx_ctrl *ctrl = (tx_ctrl *)&plocal_tx_pd->tx_control;
|
|
mc_tx_ctrl *mc_ctrl =
|
|
(mc_tx_ctrl *)&plocal_tx_pd->pkt_delay_2ms;
|
|
plocal_tx_pd->tx_pkt_type = PKT_TYPE_802DOT11_MC_AGGR;
|
|
if (pmbuf->u.mc_tx_info.mc_pkt_flags & MC_FLAG_START_CYCLE)
|
|
ctrl->mc_cycle_start = MTRUE;
|
|
else
|
|
ctrl->mc_cycle_start = MFALSE;
|
|
if (pmbuf->u.mc_tx_info.mc_pkt_flags & MC_FLAG_END_CYCLE)
|
|
ctrl->mc_cycle_end = MTRUE;
|
|
else
|
|
ctrl->mc_cycle_end = MFALSE;
|
|
if (pmbuf->u.mc_tx_info.mc_pkt_flags & MC_FLAG_START_AMPDU)
|
|
ctrl->mc_ampdu_start = MTRUE;
|
|
else
|
|
ctrl->mc_ampdu_start = MFALSE;
|
|
if (pmbuf->u.mc_tx_info.mc_pkt_flags & MC_FLAG_END_AMPDU)
|
|
ctrl->mc_ampdu_end = MTRUE;
|
|
else
|
|
ctrl->mc_ampdu_end = MFALSE;
|
|
if (pmbuf->u.mc_tx_info.mc_pkt_flags & MC_FLAG_RETRY)
|
|
ctrl->mc_pkt_retry = MTRUE;
|
|
else
|
|
ctrl->mc_pkt_retry = MFALSE;
|
|
ctrl->bw = pmbuf->u.mc_tx_info.bandwidth & 0x7;
|
|
ctrl->tx_rate = pmbuf->u.mc_tx_info.mcs_index & 0x1f;
|
|
mc_ctrl->abs_tsf_expirytime =
|
|
wlan_cpu_to_le32(pmbuf->u.mc_tx_info.pkt_expiry);
|
|
mc_ctrl->mc_seq = wlan_cpu_to_le16(pmbuf->u.mc_tx_info.seq_num);
|
|
}
|
|
|
|
endian_convert_TxPD(plocal_tx_pd);
|
|
|
|
/* Adjust the data offset and length to include TxPD in pmbuf */
|
|
pmbuf->data_len += pmbuf->data_offset;
|
|
pmbuf->data_offset = (t_u32)((t_ptr)head_ptr - (t_ptr)pmbuf->pbuf);
|
|
pmbuf->data_len -= pmbuf->data_offset;
|
|
|
|
done:
|
|
LEAVE();
|
|
return head_ptr;
|
|
}
|
|
|
|
/**
|
|
* @brief This function processes received packet and forwards it
|
|
* to kernel/upper layer
|
|
*
|
|
* @param adapter A pointer to mlan_adapter
|
|
* @param pmbuf A pointer to mlan_buffer which includes the received packet
|
|
*
|
|
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
|
|
*/
|
|
mlan_status wlan_ops_uap_process_rx_packet(t_void *adapter, pmlan_buffer pmbuf)
|
|
{
|
|
pmlan_adapter pmadapter = (pmlan_adapter)adapter;
|
|
mlan_status ret = MLAN_STATUS_SUCCESS;
|
|
RxPD *prx_pd;
|
|
wlan_mgmt_pkt *puap_pkt_hdr = MNULL;
|
|
|
|
RxPacketHdr_t *prx_pkt;
|
|
pmlan_private priv = pmadapter->priv[pmbuf->bss_index];
|
|
t_u8 ta[MLAN_MAC_ADDR_LENGTH];
|
|
t_u16 rx_pkt_type = 0;
|
|
sta_node *sta_ptr = MNULL;
|
|
#ifdef DRV_EMBEDDED_AUTHENTICATOR
|
|
t_u8 eapol_type[2] = {0x88, 0x8e};
|
|
#endif
|
|
t_u16 adj_rx_rate = 0;
|
|
t_u8 antenna = 0;
|
|
|
|
t_u32 last_rx_sec = 0;
|
|
t_u32 last_rx_usec = 0;
|
|
t_u8 ext_rate_info = 0;
|
|
|
|
ENTER();
|
|
|
|
prx_pd = (RxPD *)(pmbuf->pbuf + pmbuf->data_offset);
|
|
/* Endian conversion */
|
|
endian_convert_RxPD(prx_pd);
|
|
|
|
if (prx_pd->flags & RXPD_FLAG_EXTRA_HEADER) {
|
|
endian_convert_RxPD_extra_header(
|
|
(rxpd_extra_info *)((t_u8 *)prx_pd + sizeof(*prx_pd)));
|
|
}
|
|
|
|
if (priv->adapter->pcard_info->v14_fw_api) {
|
|
t_u8 rxpd_rate_info_orig = prx_pd->rate_info;
|
|
prx_pd->rate_info = wlan_convert_v14_rx_rate_info(
|
|
priv, rxpd_rate_info_orig);
|
|
PRINTM(MINFO,
|
|
"UAP RX: v14_fw_api=%d rx_rate =%d rxpd_rate_info=0x%x->0x%x\n",
|
|
priv->adapter->pcard_info->v14_fw_api, prx_pd->rx_rate,
|
|
rxpd_rate_info_orig, prx_pd->rate_info);
|
|
}
|
|
|
|
if (priv->rx_pkt_info) {
|
|
ext_rate_info = (t_u8)(prx_pd->rx_info >> 16);
|
|
pmbuf->u.rx_info.data_rate =
|
|
wlan_index_to_data_rate(priv->adapter, prx_pd->rx_rate,
|
|
prx_pd->rate_info,
|
|
ext_rate_info);
|
|
pmbuf->u.rx_info.channel =
|
|
(prx_pd->rx_info & RXPD_CHAN_MASK) >> 5;
|
|
pmbuf->u.rx_info.antenna = prx_pd->antenna;
|
|
pmbuf->u.rx_info.rssi = prx_pd->snr - prx_pd->nf;
|
|
}
|
|
|
|
rx_pkt_type = prx_pd->rx_pkt_type;
|
|
prx_pkt = (RxPacketHdr_t *)((t_u8 *)prx_pd + prx_pd->rx_pkt_offset);
|
|
|
|
PRINTM(MINFO,
|
|
"RX Data: data_len - prx_pd->rx_pkt_offset = %d - %d = %d\n",
|
|
pmbuf->data_len, prx_pd->rx_pkt_offset,
|
|
pmbuf->data_len - prx_pd->rx_pkt_offset);
|
|
|
|
if ((prx_pd->rx_pkt_offset + prx_pd->rx_pkt_length) !=
|
|
(t_u16)pmbuf->data_len) {
|
|
PRINTM(MERROR,
|
|
"Wrong rx packet: len=%d,rx_pkt_offset=%d,"
|
|
" rx_pkt_length=%d\n",
|
|
pmbuf->data_len, prx_pd->rx_pkt_offset,
|
|
prx_pd->rx_pkt_length);
|
|
pmbuf->status_code = MLAN_ERROR_PKT_SIZE_INVALID;
|
|
ret = MLAN_STATUS_FAILURE;
|
|
pmadapter->ops.data_complete(pmadapter, pmbuf, ret);
|
|
goto done;
|
|
}
|
|
pmbuf->data_len = prx_pd->rx_pkt_offset + prx_pd->rx_pkt_length;
|
|
|
|
if (pmadapter->priv[pmbuf->bss_index]->mgmt_frame_passthru_mask &&
|
|
prx_pd->rx_pkt_type == PKT_TYPE_MGMT_FRAME) {
|
|
/* Check if this is mgmt packet and needs to
|
|
* forwarded to app as an event
|
|
*/
|
|
puap_pkt_hdr = (wlan_mgmt_pkt *)((t_u8 *)prx_pd +
|
|
prx_pd->rx_pkt_offset);
|
|
puap_pkt_hdr->frm_len = wlan_le16_to_cpu(puap_pkt_hdr->frm_len);
|
|
if ((puap_pkt_hdr->wlan_header.frm_ctl &
|
|
IEEE80211_FC_MGMT_FRAME_TYPE_MASK) == 0)
|
|
wlan_process_802dot11_mgmt_pkt(
|
|
pmadapter->priv[pmbuf->bss_index],
|
|
(t_u8 *)&puap_pkt_hdr->wlan_header,
|
|
puap_pkt_hdr->frm_len + sizeof(wlan_mgmt_pkt) -
|
|
sizeof(puap_pkt_hdr->frm_len),
|
|
(RxPD *)prx_pd);
|
|
pmadapter->ops.data_complete(pmadapter, pmbuf, ret);
|
|
goto done;
|
|
}
|
|
if (rx_pkt_type != PKT_TYPE_BAR) {
|
|
priv->rxpd_rate = prx_pd->rx_rate;
|
|
priv->rxpd_rate_info = prx_pd->rate_info;
|
|
priv->rxpd_rx_info = (t_u8)(prx_pd->rx_info >> 16);
|
|
|
|
if (priv->bss_type == MLAN_BSS_TYPE_UAP) {
|
|
antenna = wlan_adjust_antenna(priv, (RxPD *)prx_pd);
|
|
adj_rx_rate = wlan_adjust_data_rate(
|
|
priv, priv->rxpd_rate, priv->rxpd_rate_info);
|
|
pmadapter->callbacks.moal_hist_data_add(
|
|
pmadapter->pmoal_handle, pmbuf->bss_index,
|
|
adj_rx_rate, prx_pd->snr, prx_pd->nf, antenna);
|
|
}
|
|
}
|
|
|
|
sta_ptr = wlan_get_station_entry(priv, prx_pkt->eth803_hdr.src_addr);
|
|
if (sta_ptr) {
|
|
sta_ptr->snr = prx_pd->snr;
|
|
sta_ptr->nf = prx_pd->nf;
|
|
pmadapter->callbacks.moal_get_system_time(
|
|
pmadapter->pmoal_handle, &last_rx_sec, &last_rx_usec);
|
|
sta_ptr->stats.last_rx_in_msec =
|
|
(t_u64)last_rx_sec * 1000 + (t_u64)last_rx_usec / 1000;
|
|
}
|
|
|
|
#ifdef DRV_EMBEDDED_AUTHENTICATOR
|
|
/**process eapol packet for uap*/
|
|
if (IsAuthenticatorEnabled(priv->psapriv) &&
|
|
(!memcmp(pmadapter, &prx_pkt->eth803_hdr.h803_len, eapol_type,
|
|
sizeof(eapol_type)))) {
|
|
ret = AuthenticatorProcessEapolPacket(
|
|
priv->psapriv, ((t_u8 *)prx_pd + prx_pd->rx_pkt_offset),
|
|
prx_pd->rx_pkt_length);
|
|
if (ret == MLAN_STATUS_SUCCESS) {
|
|
pmadapter->ops.data_complete(pmadapter, pmbuf, ret);
|
|
goto done;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
pmbuf->priority |= prx_pd->priority;
|
|
memcpy_ext(pmadapter, ta, prx_pkt->eth803_hdr.src_addr,
|
|
MLAN_MAC_ADDR_LENGTH, MLAN_MAC_ADDR_LENGTH);
|
|
if ((rx_pkt_type != PKT_TYPE_BAR) && (prx_pd->priority < MAX_NUM_TID)) {
|
|
sta_ptr = wlan_get_station_entry(priv, ta);
|
|
if (sta_ptr) {
|
|
sta_ptr->rx_seq[prx_pd->priority] = prx_pd->seq_num;
|
|
sta_ptr->snr = prx_pd->snr;
|
|
sta_ptr->nf = prx_pd->nf;
|
|
}
|
|
}
|
|
/* check if UAP enable 11n */
|
|
if (!priv->is_11n_enabled ||
|
|
(!wlan_11n_get_rxreorder_tbl((mlan_private *)priv, prx_pd->priority,
|
|
ta) &&
|
|
(prx_pd->rx_pkt_type != PKT_TYPE_AMSDU))) {
|
|
if (priv->pkt_fwd)
|
|
wlan_process_uap_rx_packet(priv, pmbuf);
|
|
else
|
|
wlan_upload_uap_rx_packet(pmadapter, pmbuf);
|
|
goto done;
|
|
}
|
|
/* Reorder and send to OS */
|
|
ret = mlan_11n_rxreorder_pkt(priv, prx_pd->seq_num, prx_pd->priority,
|
|
ta, (t_u8)prx_pd->rx_pkt_type,
|
|
(void *)pmbuf);
|
|
if (ret || (rx_pkt_type == PKT_TYPE_BAR)) {
|
|
pmadapter->ops.data_complete(pmadapter, pmbuf, ret);
|
|
}
|
|
done:
|
|
LEAVE();
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @brief This function processes received packet and forwards it
|
|
* to kernel/upper layer or send back to firmware
|
|
*
|
|
* @param priv A pointer to mlan_private
|
|
* @param pmbuf A pointer to mlan_buffer which includes the received packet
|
|
*
|
|
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
|
|
*/
|
|
mlan_status wlan_uap_recv_packet(mlan_private *priv, pmlan_buffer pmbuf)
|
|
{
|
|
pmlan_adapter pmadapter = priv->adapter;
|
|
mlan_status ret = MLAN_STATUS_SUCCESS;
|
|
RxPacketHdr_t *prx_pkt;
|
|
pmlan_buffer newbuf = MNULL;
|
|
|
|
ENTER();
|
|
|
|
prx_pkt = (RxPacketHdr_t *)((t_u8 *)pmbuf->pbuf + pmbuf->data_offset);
|
|
|
|
DBG_HEXDUMP(MDAT_D, "uap_recv_packet", pmbuf->pbuf + pmbuf->data_offset,
|
|
MIN(pmbuf->data_len, MAX_DATA_DUMP_LEN));
|
|
|
|
PRINTM(MDATA, "AMSDU dest " MACSTR "\n",
|
|
MAC2STR(prx_pkt->eth803_hdr.dest_addr));
|
|
|
|
/* don't do packet forwarding in disconnected state */
|
|
if (priv->media_connected == MFALSE)
|
|
goto upload;
|
|
|
|
if (prx_pkt->eth803_hdr.dest_addr[0] & 0x01) {
|
|
if (!(priv->pkt_fwd & PKT_FWD_INTRA_BCAST)) {
|
|
/* Multicast pkt */
|
|
newbuf =
|
|
wlan_alloc_mlan_buffer(pmadapter,
|
|
MLAN_TX_DATA_BUF_SIZE_2K,
|
|
0, MOAL_MALLOC_BUFFER);
|
|
if (newbuf) {
|
|
newbuf->bss_index = pmbuf->bss_index;
|
|
newbuf->buf_type = pmbuf->buf_type;
|
|
newbuf->priority = pmbuf->priority;
|
|
newbuf->in_ts_sec = pmbuf->in_ts_sec;
|
|
newbuf->in_ts_usec = pmbuf->in_ts_usec;
|
|
newbuf->data_offset =
|
|
(sizeof(TxPD) + priv->intf_hr_len +
|
|
DMA_ALIGNMENT);
|
|
util_scalar_increment(
|
|
pmadapter->pmoal_handle,
|
|
&pmadapter->pending_bridge_pkts,
|
|
pmadapter->callbacks.moal_spin_lock,
|
|
pmadapter->callbacks.moal_spin_unlock);
|
|
|
|
newbuf->flags |= MLAN_BUF_FLAG_BRIDGE_BUF;
|
|
|
|
/* copy the data */
|
|
memcpy_ext(pmadapter,
|
|
(t_u8 *)newbuf->pbuf +
|
|
newbuf->data_offset,
|
|
pmbuf->pbuf + pmbuf->data_offset,
|
|
pmbuf->data_len,
|
|
MLAN_TX_DATA_BUF_SIZE_2K);
|
|
newbuf->data_len = pmbuf->data_len;
|
|
wlan_wmm_add_buf_txqueue(pmadapter, newbuf);
|
|
if (util_scalar_read(
|
|
pmadapter->pmoal_handle,
|
|
&pmadapter->pending_bridge_pkts,
|
|
pmadapter->callbacks.moal_spin_lock,
|
|
pmadapter->callbacks
|
|
.moal_spin_unlock) >
|
|
RX_HIGH_THRESHOLD)
|
|
wlan_drop_tx_pkts(priv);
|
|
wlan_recv_event(
|
|
priv, MLAN_EVENT_ID_DRV_DEFER_HANDLING,
|
|
MNULL);
|
|
}
|
|
}
|
|
} else {
|
|
if ((!(priv->pkt_fwd & PKT_FWD_INTRA_UCAST)) &&
|
|
(wlan_get_station_entry(priv,
|
|
prx_pkt->eth803_hdr.dest_addr))) {
|
|
/* Intra BSS packet */
|
|
newbuf =
|
|
wlan_alloc_mlan_buffer(pmadapter,
|
|
MLAN_TX_DATA_BUF_SIZE_2K,
|
|
0, MOAL_MALLOC_BUFFER);
|
|
if (newbuf) {
|
|
newbuf->bss_index = pmbuf->bss_index;
|
|
newbuf->buf_type = pmbuf->buf_type;
|
|
newbuf->priority = pmbuf->priority;
|
|
newbuf->in_ts_sec = pmbuf->in_ts_sec;
|
|
newbuf->in_ts_usec = pmbuf->in_ts_usec;
|
|
newbuf->data_offset =
|
|
(sizeof(TxPD) + priv->intf_hr_len +
|
|
DMA_ALIGNMENT);
|
|
util_scalar_increment(
|
|
pmadapter->pmoal_handle,
|
|
&pmadapter->pending_bridge_pkts,
|
|
pmadapter->callbacks.moal_spin_lock,
|
|
pmadapter->callbacks.moal_spin_unlock);
|
|
newbuf->flags |= MLAN_BUF_FLAG_BRIDGE_BUF;
|
|
|
|
/* copy the data */
|
|
memcpy_ext(pmadapter,
|
|
(t_u8 *)newbuf->pbuf +
|
|
newbuf->data_offset,
|
|
pmbuf->pbuf + pmbuf->data_offset,
|
|
pmbuf->data_len,
|
|
MLAN_TX_DATA_BUF_SIZE_2K);
|
|
newbuf->data_len = pmbuf->data_len;
|
|
wlan_wmm_add_buf_txqueue(pmadapter, newbuf);
|
|
if (util_scalar_read(
|
|
pmadapter->pmoal_handle,
|
|
&pmadapter->pending_bridge_pkts,
|
|
pmadapter->callbacks.moal_spin_lock,
|
|
pmadapter->callbacks
|
|
.moal_spin_unlock) >
|
|
RX_HIGH_THRESHOLD)
|
|
wlan_drop_tx_pkts(priv);
|
|
wlan_recv_event(
|
|
priv, MLAN_EVENT_ID_DRV_DEFER_HANDLING,
|
|
MNULL);
|
|
}
|
|
goto done;
|
|
} else if (MLAN_STATUS_FAILURE ==
|
|
wlan_check_unicast_packet(
|
|
priv, prx_pkt->eth803_hdr.dest_addr)) {
|
|
/* drop packet */
|
|
PRINTM(MDATA, "Drop AMSDU dest " MACSTR "\n",
|
|
MAC2STR(prx_pkt->eth803_hdr.dest_addr));
|
|
goto done;
|
|
}
|
|
}
|
|
upload:
|
|
/** send packet to moal */
|
|
ret = pmadapter->callbacks.moal_recv_packet(pmadapter->pmoal_handle,
|
|
pmbuf);
|
|
done:
|
|
LEAVE();
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @brief This function processes received packet and forwards it
|
|
* to kernel/upper layer or send back to firmware
|
|
*
|
|
* @param priv A pointer to mlan_private
|
|
* @param pmbuf A pointer to mlan_buffer which includes the received packet
|
|
*
|
|
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
|
|
*/
|
|
mlan_status wlan_process_uap_rx_packet(mlan_private *priv, pmlan_buffer pmbuf)
|
|
{
|
|
pmlan_adapter pmadapter = priv->adapter;
|
|
mlan_status ret = MLAN_STATUS_SUCCESS;
|
|
RxPD *prx_pd;
|
|
RxPacketHdr_t *prx_pkt;
|
|
pmlan_buffer newbuf = MNULL;
|
|
|
|
ENTER();
|
|
|
|
prx_pd = (RxPD *)(pmbuf->pbuf + pmbuf->data_offset);
|
|
prx_pkt = (RxPacketHdr_t *)((t_u8 *)prx_pd + prx_pd->rx_pkt_offset);
|
|
|
|
DBG_HEXDUMP(MDAT_D, "uAP RxPD", prx_pd,
|
|
MIN(sizeof(RxPD), MAX_DATA_DUMP_LEN));
|
|
DBG_HEXDUMP(MDAT_D, "uAP Rx Payload",
|
|
((t_u8 *)prx_pd + prx_pd->rx_pkt_offset),
|
|
MIN(prx_pd->rx_pkt_length, MAX_DATA_DUMP_LEN));
|
|
|
|
PRINTM(MINFO,
|
|
"RX Data: data_len - prx_pd->rx_pkt_offset = %d - %d = %d\n",
|
|
pmbuf->data_len, prx_pd->rx_pkt_offset,
|
|
pmbuf->data_len - prx_pd->rx_pkt_offset);
|
|
PRINTM(MDATA, "Rx dest " MACSTR "\n",
|
|
MAC2STR(prx_pkt->eth803_hdr.dest_addr));
|
|
|
|
if (pmadapter->enable_net_mon) {
|
|
pmbuf->flags |= MLAN_BUF_FLAG_NET_MONITOR;
|
|
goto upload;
|
|
}
|
|
|
|
/* don't do packet forwarding in disconnected state */
|
|
/* don't do packet forwarding when packet > 1514 */
|
|
if (priv->media_connected == MFALSE)
|
|
goto upload;
|
|
|
|
if (prx_pkt->eth803_hdr.dest_addr[0] & 0x01) {
|
|
if (!(priv->pkt_fwd & PKT_FWD_INTRA_BCAST)) {
|
|
/* Multicast pkt */
|
|
newbuf =
|
|
wlan_alloc_mlan_buffer(pmadapter,
|
|
MLAN_TX_DATA_BUF_SIZE_2K,
|
|
0, MOAL_MALLOC_BUFFER);
|
|
if (newbuf) {
|
|
newbuf->bss_index = pmbuf->bss_index;
|
|
newbuf->buf_type = pmbuf->buf_type;
|
|
newbuf->priority = pmbuf->priority;
|
|
newbuf->in_ts_sec = pmbuf->in_ts_sec;
|
|
newbuf->in_ts_usec = pmbuf->in_ts_usec;
|
|
newbuf->data_offset =
|
|
(sizeof(TxPD) + priv->intf_hr_len +
|
|
DMA_ALIGNMENT);
|
|
util_scalar_increment(
|
|
pmadapter->pmoal_handle,
|
|
&pmadapter->pending_bridge_pkts,
|
|
pmadapter->callbacks.moal_spin_lock,
|
|
pmadapter->callbacks.moal_spin_unlock);
|
|
newbuf->flags |= MLAN_BUF_FLAG_BRIDGE_BUF;
|
|
|
|
/* copy the data, skip rxpd */
|
|
memcpy_ext(pmadapter,
|
|
(t_u8 *)newbuf->pbuf +
|
|
newbuf->data_offset,
|
|
pmbuf->pbuf + pmbuf->data_offset +
|
|
prx_pd->rx_pkt_offset,
|
|
pmbuf->data_len -
|
|
prx_pd->rx_pkt_offset,
|
|
MLAN_TX_DATA_BUF_SIZE_2K);
|
|
newbuf->data_len =
|
|
pmbuf->data_len - prx_pd->rx_pkt_offset;
|
|
wlan_wmm_add_buf_txqueue(pmadapter, newbuf);
|
|
if (util_scalar_read(
|
|
pmadapter->pmoal_handle,
|
|
&pmadapter->pending_bridge_pkts,
|
|
pmadapter->callbacks.moal_spin_lock,
|
|
pmadapter->callbacks
|
|
.moal_spin_unlock) >
|
|
RX_HIGH_THRESHOLD)
|
|
wlan_drop_tx_pkts(priv);
|
|
wlan_recv_event(
|
|
priv, MLAN_EVENT_ID_DRV_DEFER_HANDLING,
|
|
MNULL);
|
|
}
|
|
}
|
|
} else {
|
|
if ((!(priv->pkt_fwd & PKT_FWD_INTRA_UCAST)) &&
|
|
(wlan_get_station_entry(priv,
|
|
prx_pkt->eth803_hdr.dest_addr))) {
|
|
/* Forwarding Intra-BSS packet */
|
|
#ifdef USB
|
|
if (IS_USB(pmadapter->card_type)) {
|
|
if (pmbuf->flags & MLAN_BUF_FLAG_RX_DEAGGR) {
|
|
newbuf = wlan_alloc_mlan_buffer(
|
|
pmadapter,
|
|
MLAN_TX_DATA_BUF_SIZE_2K, 0,
|
|
MOAL_MALLOC_BUFFER);
|
|
if (newbuf) {
|
|
newbuf->bss_index =
|
|
pmbuf->bss_index;
|
|
newbuf->buf_type =
|
|
pmbuf->buf_type;
|
|
newbuf->priority =
|
|
pmbuf->priority;
|
|
newbuf->in_ts_sec =
|
|
pmbuf->in_ts_sec;
|
|
newbuf->in_ts_usec =
|
|
pmbuf->in_ts_usec;
|
|
newbuf->data_offset =
|
|
(sizeof(TxPD) +
|
|
priv->intf_hr_len +
|
|
DMA_ALIGNMENT);
|
|
util_scalar_increment(
|
|
pmadapter->pmoal_handle,
|
|
&pmadapter->pending_bridge_pkts,
|
|
pmadapter->callbacks
|
|
.moal_spin_lock,
|
|
pmadapter->callbacks
|
|
.moal_spin_unlock);
|
|
newbuf->flags |=
|
|
MLAN_BUF_FLAG_BRIDGE_BUF;
|
|
|
|
/* copy the data, skip rxpd */
|
|
memcpy_ext(
|
|
pmadapter,
|
|
(t_u8 *)newbuf->pbuf +
|
|
newbuf->data_offset,
|
|
pmbuf->pbuf +
|
|
pmbuf->data_offset +
|
|
prx_pd->rx_pkt_offset,
|
|
pmbuf->data_len -
|
|
prx_pd->rx_pkt_offset,
|
|
pmbuf->data_len -
|
|
prx_pd->rx_pkt_offset);
|
|
newbuf->data_len =
|
|
pmbuf->data_len -
|
|
prx_pd->rx_pkt_offset;
|
|
wlan_wmm_add_buf_txqueue(
|
|
pmadapter, newbuf);
|
|
if (util_scalar_read(
|
|
pmadapter->pmoal_handle,
|
|
&pmadapter->pending_bridge_pkts,
|
|
pmadapter->callbacks
|
|
.moal_spin_lock,
|
|
pmadapter->callbacks
|
|
.moal_spin_unlock) >
|
|
RX_HIGH_THRESHOLD)
|
|
wlan_drop_tx_pkts(priv);
|
|
wlan_recv_event(
|
|
priv,
|
|
MLAN_EVENT_ID_DRV_DEFER_HANDLING,
|
|
MNULL);
|
|
}
|
|
pmadapter->callbacks.moal_recv_complete(
|
|
pmadapter->pmoal_handle, pmbuf,
|
|
pmadapter->rx_data_ep, ret);
|
|
goto done;
|
|
}
|
|
}
|
|
#endif
|
|
pmbuf->data_len -= prx_pd->rx_pkt_offset;
|
|
pmbuf->data_offset += prx_pd->rx_pkt_offset;
|
|
pmbuf->flags |= MLAN_BUF_FLAG_BRIDGE_BUF;
|
|
util_scalar_increment(
|
|
pmadapter->pmoal_handle,
|
|
&pmadapter->pending_bridge_pkts,
|
|
pmadapter->callbacks.moal_spin_lock,
|
|
pmadapter->callbacks.moal_spin_unlock);
|
|
wlan_wmm_add_buf_txqueue(pmadapter, pmbuf);
|
|
if (util_scalar_read(
|
|
pmadapter->pmoal_handle,
|
|
&pmadapter->pending_bridge_pkts,
|
|
pmadapter->callbacks.moal_spin_lock,
|
|
pmadapter->callbacks.moal_spin_unlock) >
|
|
RX_HIGH_THRESHOLD)
|
|
wlan_drop_tx_pkts(priv);
|
|
wlan_recv_event(priv, MLAN_EVENT_ID_DRV_DEFER_HANDLING,
|
|
MNULL);
|
|
goto done;
|
|
} else if (MLAN_STATUS_FAILURE ==
|
|
wlan_check_unicast_packet(
|
|
priv, prx_pkt->eth803_hdr.dest_addr)) {
|
|
PRINTM(MDATA, "Drop Pkts: Rx dest " MACSTR "\n",
|
|
MAC2STR(prx_pkt->eth803_hdr.dest_addr));
|
|
pmbuf->status_code = MLAN_ERROR_PKT_INVALID;
|
|
pmadapter->ops.data_complete(pmadapter, pmbuf, ret);
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
upload:
|
|
/* Chop off RxPD */
|
|
pmbuf->data_len -= prx_pd->rx_pkt_offset;
|
|
pmbuf->data_offset += prx_pd->rx_pkt_offset;
|
|
pmbuf->pparent = MNULL;
|
|
|
|
pmadapter->callbacks.moal_get_system_time(pmadapter->pmoal_handle,
|
|
&pmbuf->out_ts_sec,
|
|
&pmbuf->out_ts_usec);
|
|
PRINTM_NETINTF(MDATA, priv);
|
|
PRINTM(MDATA, "%lu.%06lu : Data => kernel seq_num=%d tid=%d\n",
|
|
pmbuf->out_ts_sec, pmbuf->out_ts_usec, prx_pd->seq_num,
|
|
prx_pd->priority);
|
|
if (pmbuf->flags & MLAN_BUF_FLAG_NET_MONITOR) {
|
|
// Use some rxpd space to save rxpd info for radiotap header
|
|
// We should insure radiotap_info is not bigger than RxPD
|
|
wlan_rxpdinfo_to_radiotapinfo(
|
|
priv, (RxPD *)prx_pd,
|
|
(radiotap_info *)(pmbuf->pbuf + pmbuf->data_offset -
|
|
sizeof(radiotap_info)));
|
|
}
|
|
|
|
ret = pmadapter->callbacks.moal_recv_packet(pmadapter->pmoal_handle,
|
|
pmbuf);
|
|
if (ret == MLAN_STATUS_FAILURE) {
|
|
PRINTM(MERROR,
|
|
"uAP Rx Error: moal_recv_packet returned error\n");
|
|
pmbuf->status_code = MLAN_ERROR_PKT_INVALID;
|
|
}
|
|
|
|
if (ret != MLAN_STATUS_PENDING)
|
|
pmadapter->ops.data_complete(pmadapter, pmbuf, ret);
|
|
#ifdef USB
|
|
else if (IS_USB(pmadapter->card_type))
|
|
pmadapter->callbacks.moal_recv_complete(pmadapter->pmoal_handle,
|
|
MNULL,
|
|
pmadapter->rx_data_ep,
|
|
ret);
|
|
#endif
|
|
done:
|
|
LEAVE();
|
|
return ret;
|
|
}
|