mwifiex/mwifiex_8997/mapp/mlanconfig/config/smc.conf
Fugang Duan bd8827d169 mwifiex: 8997: add W16.68.10.p16 release sdk
The sdk release is from NXP offial web:
https://www.nxp.com/products/wireless/wi-fi-plus-bluetooth/
88w8997-wi-fi-dual-band-with-bluetooth-5-for-a-v-streaming-and-digital-tv:88W8997?tab=Design_Tools_Tab

The release file is:
PCIE-WLAN-UART-BT-8997-U16-X86-W16.68.10.p16-16.26.10.p16-C4X16640_V4-MGPL

The sdk version is: W16.68.10.p16

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
2020-01-13 10:35:39 +08:00

125 lines
2.2 KiB
Plaintext
Executable file

# File : smc.conf
smc_get={
CmdCode=0x012d #do not change this
Action:2=0 # GET
}
smc_set={
CmdCode=0x012d #do not change this
Action:2=1 # SET
# SSID
SSIDHeaderType:2=0x0000
SSIDHeaderLen:2={
SSID:10="Marvell_SMC_1"
}
# Beacon Period.
# This should be smaller than than MinScanTime.
BeaconHeaderType:2=0x012c
BeaconHeaderLen:2={
beaconPeriod:2=30
}
# Channel list.
# ChanNumber, MinScanTime and ScanTime are mandatory.
# MinScanTime is minimum dwelling time for ChanNumber channel.
# ScanTime is maximum dwelling time for ChanNumber channel.
ChannHeaderType:2=0x0101
ChannHeaderLen:2={
# Following four line define one channel.
# Please add similar four lines with different channel number for new channel.
Chan1_RadioType:1=0
Chan1_ChanNumber:1=1
Chan1_ScanType:1=2
Chan1_MinScanTime:2=40
Chan1_ScanTime:2=200
Chan2_RadioType:1=0
Chan2_ChanNumber:1=6
Chan2_ScanType:1=3
Chan2_MinScanTime:2=40
Chan2_ScanTime:2=200
Chan3_RadioType:1=0
Chan3_ChanNumber:1=9
Chan3_ScanType:1=2
Chan3_MinScanTime:2=40
Chan3_ScanTime:2=100
Chan2_RadioType:1=0
Chan2_ChanNumber:1=11
Chan2_ScanType:1=3
Chan2_MinScanTime:2=40
Chan2_ScanTime:2=200
}
#Custom IE
#Currently max size of custom IE supported is 50 bytes.
#
# CustomHeaderType:2=0x010a
# CustomHeaderLen:2={
# start:1=0xdd
# start:1=0x10
# start:1=0x00
# start:1=0x01
# start:1=0x02
# start:1=0x03
# start:1=0x04
# start:1=0x05
# start:1=0x06
# start:1=0x07
# start:1=0x08
# start:1=0x09
# start:1=0x0a
# start:1=0x0b
# start:1=0x0c
# start:1=0x0d
# start:1=0x0e
# start:1=0x0f
# }
#Multicast mac filtering address
#All the multicast packets from starting mac address to ending mac address would
#be captured and sent to the host.
MACHeaderType:2=0x01cc
MACHeaderLen:2={
#Staring Multicast mac address
start:1=0x01
start:1=0x00
start:1=0x5e
start:1=0x00
start:1=0x00
start:1=0x01
#Ending Multicast mac address
end:1=0x01
end:1=0x00
end:1=0x5e
end:1=0x7f
end:1=0xff
end:1=0xff
#FilterType
# 1 for RX AP frames
# 2 for RX STA frames
# 3 for both
Filter:2=0x3
}
}
smc_start={
CmdCode=0x012d #do not change this
Action:2=2 # START
}
smc_stop={
CmdCode=0x012d #do not change this
Action:2=3 # STOP
}