mwifiex/mwifiex_8997/mapp/mlanconfig/config/bg_scan_wifidirect.conf
Fugang Duan bd8827d169 mwifiex: 8997: add W16.68.10.p16 release sdk
The sdk release is from NXP offial web:
https://www.nxp.com/products/wireless/wi-fi-plus-bluetooth/
88w8997-wi-fi-dual-band-with-bluetooth-5-for-a-v-streaming-and-digital-tv:88W8997?tab=Design_Tools_Tab

The release file is:
PCIE-WLAN-UART-BT-8997-U16-X86-W16.68.10.p16-16.26.10.p16-C4X16640_V4-MGPL

The sdk version is: W16.68.10.p16

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
2020-01-13 10:35:39 +08:00

89 lines
2.5 KiB
Plaintext
Executable file

# File : bg_scan_wifidirect.conf
######################### BG Scan Configuration command ##################
########### SET BG Scan Configuration #####################
bgscfg={
CmdCode=0x006b # do NOT change this line
Action:1=1 # 0- Get, 1- Set
ConfigType:1=0 # 0- normal BG Scan config, 1-PPS or UAPSD BG Scan config
Enable:1=1 # 0- Disable, 1-Enable
BssType:1=3 # 1 - Infrastructure,2 - IBSS,3 - Any
ChannelsPerScan:1=3 # Number of Channel to scan at one scan; maximum 14
Reserved1:3=0
ScanInterval:4=1000 # Interval between consecutive scan (in milliseconds)
StoreCondition:4=1 # 1 - SSID match (bit 0)
# 2 - SSID match AND SNR above SNR threshold (bit 1)
ReportConditions:4=1 # 1 - SSID match (bit 0)
# 2 - SSID match AND SNR above SNR threshold (bit 1)
Reserved3:2=0
# SSID parameter set:
#
SSIDHeaderType:2=0x0112
SSIDHeaderLen:2={
MaxSSIDLen:1=0x00
SSID:7="DIRECT-"
}
# Number Probe requests to be sent for broadcast and
# for each SSID specific scan required.
#
# If any SSID in the list has a non-zero modifier (wildcard match char,
# unix pattern match, maxlen), "Numprobes" of broadcast probe requests
# will be transmitted once per channel and the results matched against
# all entries.
#
# Set to 0 to use global scan probes setting
#
ProbeHeaderType:2=0x0102
ProbeHeaderLen:2={
NumProbes:2=2
}
# ChannelList contains the channels to scan
# The ChannelList should be specified in the form of
#
# RadioType, ChanNumber, ScanType, MinScanTime, ScanTime;
#
# RadioType - 0 [B/G Band], 1 [A Band]
# ScanType - 2 [Active], 3 [Passive]
#
ChannHeaderType:2=0x0101
ChannHeaderLen:2={
Chan1_RadioType:1=0
Chan1_ChanNumber:1=1
Chan1_ScanType:1=2
Chan1_MinScanTime:2=10
Chan1_ScanTime:2=100
Chan2_RadioType:1=0
Chan2_ChanNumber:1=6
Chan2_ScanType:1=2
Chan2_MinScanTime:2=10
Chan2_ScanTime:2=100
Chan3_RadioType:1=0
Chan3_ChanNumber:1=11
Chan3_ScanType:1=2
Chan3_MinScanTime:2=10
Chan3_ScanTime:2=100
}
# SNR threshold to match, when StoreCondition
# or ReportConditions been set to 2
SNRHeaderType:2=0x0105
SNRHeaderLen:2={
SNRValue:1=40 #SNR Thereshold Value
SNRFreq:1=0
}
# StartLaterValue: 0 - BGScan start immediately
# 1 - BGScan will start later after "Scan Interval"
StartLaterHeaderType:2=0x011e
StartLaterHeaderLen:2={
StartLaterValue:2=0
}
}
######################### BG Scan Configuration command ##################