mochabin/mwifiex
1
0
Fork 0
mirror of https://github.com/nxp-imx/mwifiex.git synced 2024-11-15 03:25:35 +00:00
Code Issues Projects Releases Packages Wiki Activity
mwifiex/mxm_wifiex/wlan_src/mlinux/moal_init.c
Sherry Sun 13b6fdb0b4 mxm_wifiex: update to mxm5x17283 release 
changes:
1. WCSWREL-191: Fixed the error when loading module param from user config for SD8801
2. WCSWREL-186: Fixed the issue of mlanutl failing on kernel higher than L5.15
3. Fixed low throughput issue for WPA3 SAE
4. Added driver change for WLAN throughput improvement on 8997 SoC
5. Updated README to recommend not to use WEP/TKIP for all chipsets
6. WCSWREL-180: Fix P2P test fail on kernel higher than L5.12
7. WCSWREL-156: kernel_write/kernel_read not allowed by drivers for L5.10 kernel GKI buildou
8. Alternative for pm_qos_add_request/pm_qos_remove_request

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Approved-by: Tian Yang <yang.tian@nxp.com>
2021-10-14 10:50:37 +08:00

2497 lines
74 KiB
C
Raw Blame History

/** @file moal_init.c
*
* @brief This file contains the major functions in WLAN
* driver.
*
*
* Copyright 2018-2021 NXP
*
* This software file (the File) is distributed by NXP
* under the terms of the GNU General Public License Version 2, June 1991
* (the License). You may use, redistribute and/or modify the File in
* accordance with the terms and conditions of the License, a copy of which
* is available by writing to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
* worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
*
* THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
* this warranty disclaimer.
*
*/
#include "moal_main.h"
/** Global moal_handle array */
extern pmoal_handle m_handle[];
/** Firmware name */
static char *fw_name;
static int req_fw_nowait;
int fw_reload;
/** MAC address */
static char *mac_addr;
/** Module param cfg file */
static char *mod_para;
#ifdef MFG_CMD_SUPPORT
/** Mfg mode */
int mfg_mode;
#endif
#if defined(SDIO)
/** SDIO interrupt mode (0: INT_MODE_SDIO, 1: INT_MODE_GPIO) */
static int intmode = INT_MODE_SDIO;
/** GPIO interrupt pin number */
static int gpiopin;
#endif
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
static int disable_regd_by_driver = 1;
/** Region alpha2 string */
static char *reg_alpha2;
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
static int country_ie_ignore;
static int beacon_hints;
#endif
#endif
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)
static int host_mlme;
#endif
#endif
/** Auto deep sleep */
static int auto_ds;
/** net_rx mode*/
static int net_rx;
static int ext_scan;
/** IEEE PS mode */
static int ps_mode;
/** passive to active scan */
static int p2a_scan;
/** scan chan gap */
static int scan_chan_gap;
/** sched scan */
static int sched_scan = 1;
/** Max Tx buffer size */
int max_tx_buf;
#ifdef STA_SUPPORT
/** Max STA interfaces */
static int max_sta_bss = DEF_STA_BSS;
/** STA interface name */
static char *sta_name;
#endif
#ifdef UAP_SUPPORT
/** Max uAP interfaces */
static int max_uap_bss = DEF_UAP_BSS;
/** uAP interface name */
static char *uap_name;
/** Max uAP station number */
static int uap_max_sta;
/** WACP mode */
static int wacp_mode = WACP_MODE_DEFAULT;
#endif
#ifdef WIFI_DIRECT_SUPPORT
/** Max WIFIDIRECT interfaces */
static int max_wfd_bss = DEF_WIFIDIRECT_BSS;
/** WIFIDIRECT interface name */
static char *wfd_name;
#if defined(STA_CFG80211) && defined(UAP_CFG80211)
/** max VIRTUAL bss */
static int max_vir_bss = DEF_VIRTUAL_BSS;
#endif
#endif
/** PM keep power */
static int pm_keep_power = 1;
#ifdef SDIO_SUSPEND_RESUME
/** HS when shutdown */
static int shutdown_hs;
#endif
#if defined(SDIO)
/** SDIO slew rate */
static int slew_rate = 3;
#endif
int tx_work = 0;
static int rps = 0;
static int tx_skb_clone = 0;
static int pmqos = 0;
#if defined(STA_SUPPORT)
/** 802.11d configuration */
static int cfg_11d;
#endif
/** fw serial download check */
static int fw_serial = 1;
/** napi support*/
static int napi;
/** DPD data config file */
static char *dpd_data_cfg;
/** CAL data config file */
static char *cal_data_cfg;
/** Init config file (MAC address, register etc.) */
static char *init_cfg;
/** Set configuration data of Tx power limitation */
static char *txpwrlimit_cfg;
/** Allow setting tx power table of country */
static int cntry_txpwr;
/** Init hostcmd file */
static char *init_hostcmd_cfg;
static char *band_steer_cfg;
#if defined(STA_WEXT) || defined(UAP_WEXT)
/** CFG80211 and WEXT mode */
static int cfg80211_wext =
STA_WEXT_MASK | UAP_WEXT_MASK | STA_CFG80211_MASK | UAP_CFG80211_MASK;
#else
/** CFG80211 mode */
static int cfg80211_wext = STA_CFG80211_MASK | UAP_CFG80211_MASK;
#endif
/** Work queue priority */
static int wq_sched_prio;
/** Work queue scheduling policy */
static int wq_sched_policy = SCHED_NORMAL;
/** rx_work flag */
static int rx_work;
#if defined(USB)
int skip_fwdnld;
#endif
/* Enable/disable aggrctrl */
static int aggrctrl;
#ifdef USB
/* Enable/disable USB aggregation feature */
static int usb_aggr;
#endif
#ifdef PCIE
/* Enable/disable Message Signaled Interrupt (MSI) */
int pcie_int_mode = PCIE_INT_MODE_MSI;
static int ring_size;
#endif /* PCIE */
static int low_power_mode_enable;
static int hw_test;
#ifdef CONFIG_OF
int dts_enable = 1;
#endif
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
static int dfs_offload;
#endif
int wakelock_timeout = WAKE_LOCK_TIMEOUT;
#if defined(STA_SUPPORT) && defined(UAP_SUPPORT)
#ifdef WIFI_DIRECT_SUPPORT
static int drv_mode = (DRV_MODE_STA | DRV_MODE_UAP | DRV_MODE_WIFIDIRECT);
#else
static int drv_mode = (DRV_MODE_STA | DRV_MODE_UAP);
#endif /* WIFI_DIRECT_SUPPORT */
#else
#ifdef STA_SUPPORT
static int drv_mode = DRV_MODE_STA;
#else
static int drv_mode = DRV_MODE_UAP;
#endif /* STA_SUPPORT */
#endif /* STA_SUPPORT & UAP_SUPPORT */
static int gtk_rekey_offload = GTK_REKEY_OFFLOAD_DISABLE;
static int pmic;
static int antcfg;
static t_u32 uap_oper_ctrl;
static int hs_wake_interval = 400;
static int indication_gpio = 0xff;
static int disconnect_on_suspend;
static int hs_mimo_switch;
static int indrstcfg = 0xffffffff;
/** all the feature are enabled */
#define DEFAULT_DEV_CAP_MASK 0xffffffff
static t_u32 dev_cap_mask = DEFAULT_DEV_CAP_MASK;
#ifdef SDIO
static int sdio_rx_aggr = MTRUE;
#endif
/** The global variable of scan beacon buffer **/
static int fixed_beacon_buffer;
#ifdef WIFI_DIRECT_SUPPORT
static int GoAgeoutTime;
#endif
static t_u16 multi_dtim;
static t_u16 inact_tmo;
#ifdef DEBUG_LEVEL1
#ifdef DEBUG_LEVEL2
#define DEFAULT_DEBUG_MASK (0xffffffff)
#else
#define DEFAULT_DEBUG_MASK (MMSG | MFATAL | MERROR | MREG_D)
#endif /* DEBUG_LEVEL2 */
t_u32 drvdbg = DEFAULT_DEBUG_MASK;
#endif /* DEBUG_LEVEL1 */
static card_type_entry card_type_map_tbl[] = {
#ifdef SD8801
{CARD_TYPE_SD8801, 0, CARD_SD8801},
#endif
#ifdef SD8887
{CARD_TYPE_SD8887, 0, CARD_SD8887},
#endif
#ifdef SD8897
{CARD_TYPE_SD8897, 0, CARD_SD8897},
#endif
#ifdef SD8977
{CARD_TYPE_SD8977, 0, CARD_SD8977},
#endif
#ifdef SD8978
{CARD_TYPE_SD8978, 0, CARD_SD8978},
#endif
#ifdef SD8997
{CARD_TYPE_SD8997, 0, CARD_SD8997},
#endif
#ifdef SD8987
{CARD_TYPE_SD8987, 0, CARD_SD8987},
#endif
#ifdef SD9097
{CARD_TYPE_SD9097, 0, CARD_SD9097},
#endif
#ifdef SD9098
{CARD_TYPE_SD9098, 0, CARD_SD9098},
#endif
#ifdef SD9177
{CARD_TYPE_SD9177, 0, CARD_SD9177},
#endif
#ifdef PCIE8897
{CARD_TYPE_PCIE8897, 0, CARD_PCIE8897},
#endif
#ifdef PCIE8997
{CARD_TYPE_PCIE8997, 0, CARD_PCIE8997},
#endif
#ifdef PCIE9097
{CARD_TYPE_PCIE9097, 0, CARD_PCIE9097},
#endif
#ifdef PCIE9098
{CARD_TYPE_PCIE9098, 0, CARD_PCIE9098},
#endif
#ifdef USB8801
{CARD_TYPE_USB8801, 0, CARD_USB8801},
#endif
#ifdef USB8897
{CARD_TYPE_USB8897, 0, CARD_USB8897},
#endif
#ifdef USB8997
{CARD_TYPE_USB8997, 0, CARD_USB8997},
#endif
#ifdef USB8978
{CARD_TYPE_USB8978, 0, CARD_USB8978},
#endif
#ifdef USB9098
{CARD_TYPE_USB9098, 0, CARD_USB9098},
#endif
#ifdef USB9097
{CARD_TYPE_USB9097, 0, CARD_USB9097},
#endif
};
static int dfs53cfg = DFS_W53_DEFAULT_FW;
/**
* @brief This function read a line in module parameter file
*
* @param data A pointer to module parameter data buffer
* @param size module parameter file size
* @param line_pos A pointer to offset of current line
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
static t_size parse_cfg_get_line(t_u8 *data, t_size size, t_u8 *line_pos)
{
t_u8 *src, *dest;
static t_s32 pos;
ENTER();
if (pos >= (t_s32)size) { /* reach the end */
pos = 0; /* Reset position for rfkill */
LEAVE();
return -1;
}
memset(line_pos, 0, MAX_LINE_LEN);
src = data + pos;
dest = line_pos;
while (pos < (t_s32)size && *src != '\x0A' && *src != '\0') {
if (*src != ' ' && *src != '\t') /* parse space */
*dest++ = *src++;
else
src++;
pos++;
}
/* parse new line */
pos++;
*dest = '\0';
LEAVE();
return strlen(line_pos);
}
/**
* @brief This function duplicate a string
*
* @param dst A pointer to destination string
* @param src A pointer to source string
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
static void woal_dup_string(char **dst, char *src)
{
size_t len = 0;
if (src) {
len = strlen(src);
if (len != 0) {
if (*dst != NULL)
kfree(*dst);
*dst = kzalloc(len + 1, GFP_KERNEL);
if (*dst == NULL) {
PRINTM(MERROR,
"Failed to alloc mem for param: %s\n",
src);
return;
}
moal_memcpy_ext(NULL, *dst, src, len, len);
}
}
}
/**
* @brief This function read an integer value in module parameter file
*
* @param line A pointer to a line
* @param out_data A pointer to parsed integer value
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
static mlan_status parse_line_read_int(t_u8 *line, int *out_data)
{
t_u8 *p = NULL;
mlan_status ret = MLAN_STATUS_SUCCESS;
if (line == NULL) {
ret = MLAN_STATUS_FAILURE;
goto out;
}
p = strstr(line, "=");
if (p == NULL) {
ret = MLAN_STATUS_FAILURE;
goto out;
}
p++;
ret = woal_atoi(out_data, p);
out:
if (ret != MLAN_STATUS_SUCCESS)
*out_data = 0;
return ret;
}
/**
* @brief This function read a string in module parameter file
*
* @param line A pointer to a line
* @param out_str A pointer to parsed string
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
static mlan_status parse_line_read_string(t_u8 *line, char **out_str)
{
t_u8 *p = NULL, *pstr = NULL;
mlan_status ret = MLAN_STATUS_SUCCESS;
if (line == NULL) {
ret = MLAN_STATUS_FAILURE;
goto out;
}
p = strstr(line, "=");
if (p == NULL) {
ret = MLAN_STATUS_FAILURE;
goto out;
}
p++;
pstr = p;
while (*pstr) {
if (*pstr == '\"')
*pstr = '\0';
pstr++;
}
if (*p == '\0')
p++;
*out_str = p;
out:
return ret;
}
/**
* @brief This function read card info in module parameter file
*
* @param line A pointer to a line
* @param type A pointer to card type
* @param if_id A pointer to interface id
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
static mlan_status parse_line_read_card_info(t_u8 *line, char **type,
char **if_id)
{
t_u8 *p = NULL;
mlan_status ret = MLAN_STATUS_SUCCESS;
if (line == NULL) {
ret = MLAN_STATUS_FAILURE;
goto out;
}
p = strstr(line, "=");
if (p == NULL) {
ret = MLAN_STATUS_FAILURE;
goto out;
}
*p = '\0';
p = strstr(line, "_");
if (p != NULL) {
*p++ = '\0';
*if_id = p;
} else {
*if_id = NULL;
}
*type = line;
out:
return ret;
}
/**
* @brief This function read blocks in module parameter file
*
* @param data A pointer to a line
* @param size line size
* @param handle A pointer to moal_handle structure
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
static mlan_status parse_cfg_read_block(t_u8 *data, t_u32 size,
moal_handle *handle)
{
int out_data = 0, end = 0;
char *out_str = NULL;
t_u8 line[MAX_LINE_LEN];
moal_mod_para *params = &handle->params;
mlan_status ret = MLAN_STATUS_SUCCESS;
while ((int)parse_cfg_get_line(data, size, line) != -1) {
if (strncmp(line, "}", strlen("}")) == 0) {
end = 1;
break;
}
if (end == 0 && strstr(line, "{") != NULL)
break;
if (strncmp(line, "hw_test", strlen("hw_test")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_HW_TEST);
else
moal_extflg_clear(handle, EXT_HW_TEST);
PRINTM(MMSG, "hw_test %s\n",
moal_extflg_isset(handle, EXT_HW_TEST) ? "on" :
"off");
}
#ifdef CONFIG_OF
else if (strncmp(line, "dts_enable", strlen("dts_enable")) ==
0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_DTS_ENABLE);
else
moal_extflg_clear(handle, EXT_DTS_ENABLE);
PRINTM(MMSG, "dts_enable %s\n",
moal_extflg_isset(handle, EXT_DTS_ENABLE) ?
"on" :
"off");
}
#endif
else if (strncmp(line, "fw_name", strlen("fw_name")) == 0) {
if (parse_line_read_string(line, &out_str) !=
MLAN_STATUS_SUCCESS)
goto err;
woal_dup_string(&params->fw_name, out_str);
PRINTM(MMSG, "fw_name=%s\n", params->fw_name);
} else if (strncmp(line, "req_fw_nowait",
strlen("req_fw_nowait")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_REQ_FW_NOWAIT);
else
moal_extflg_clear(handle, EXT_REQ_FW_NOWAIT);
PRINTM(MMSG, "req fw nowait %s\n",
moal_extflg_isset(handle, EXT_REQ_FW_NOWAIT) ?
"on" :
"off");
} else if (strncmp(line, "fw_reload", strlen("fw_reload")) ==
0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->fw_reload = out_data;
PRINTM(MMSG, "fw_reload %d\n", params->fw_reload);
} else if (strncmp(line, "fw_serial", strlen("fw_serial")) ==
0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_FW_SERIAL);
else
moal_extflg_clear(handle, EXT_FW_SERIAL);
PRINTM(MMSG, "fw_serial %s\n",
moal_extflg_isset(handle, EXT_FW_SERIAL) ?
"on" :
"off");
} else if (strncmp(line, "mac_addr", strlen("mac_addr")) == 0) {
if (parse_line_read_string(line, &out_str) !=
MLAN_STATUS_SUCCESS)
goto err;
woal_dup_string(&params->mac_addr, out_str);
PRINTM(MMSG, "mac_addr=%s\n", params->mac_addr);
}
#ifdef MFG_CMD_SUPPORT
else if (strncmp(line, "mfg_mode", strlen("mfg_mode")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->mfg_mode = out_data;
PRINTM(MMSG, "mfg_mode = %d\n", params->mfg_mode);
}
#endif
else if (strncmp(line, "drv_mode", strlen("drv_mode")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->drv_mode = out_data;
PRINTM(MMSG, "drv_mode = %d\n", params->drv_mode);
}
#ifdef STA_SUPPORT
else if (strncmp(line, "max_sta_bss", strlen("max_sta_bss")) ==
0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->max_sta_bss = out_data;
PRINTM(MMSG, "max_sta_bss = %d\n", params->max_sta_bss);
} else if (strncmp(line, "sta_name", strlen("sta_name")) == 0) {
if (parse_line_read_string(line, &out_str) !=
MLAN_STATUS_SUCCESS)
goto err;
woal_dup_string(&params->sta_name, out_str);
PRINTM(MMSG, "sta_name=%s\n", params->sta_name);
}
#endif /* STA_SUPPORT */
#ifdef UAP_SUPPORT
else if (strncmp(line, "max_uap_bss", strlen("max_uap_bss")) ==
0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->max_uap_bss = out_data;
PRINTM(MMSG, "max_uap_bss = %d\n", params->max_uap_bss);
} else if (strncmp(line, "uap_name", strlen("uap_name")) == 0) {
if (parse_line_read_string(line, &out_str) !=
MLAN_STATUS_SUCCESS)
goto err;
woal_dup_string(&params->uap_name, out_str);
PRINTM(MMSG, "uap_name=%s\n", params->uap_name);
}
#endif /* UAP_SUPPORT */
#ifdef WIFI_DIRECT_SUPPORT
else if (strncmp(line, "wfd_name", strlen("wfd_name")) == 0) {
if (parse_line_read_string(line, &out_str) !=
MLAN_STATUS_SUCCESS)
goto err;
woal_dup_string(&params->wfd_name, out_str);
PRINTM(MMSG, "wfd_name=%s\n", params->wfd_name);
}
#if defined(STA_CFG80211) && defined(UAP_CFG80211)
else if (strncmp(line, "max_vir_bss", strlen("max_vir_bss")) ==
0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->max_vir_bss = out_data;
PRINTM(MMSG, "max_vir_bss=%d\n", params->max_vir_bss);
}
#endif
#endif
else if (strncmp(line, "auto_ds", strlen("auto_ds")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->auto_ds = out_data;
PRINTM(MMSG, "auto_ds = %d\n", params->auto_ds);
} else if (strncmp(line, "net_rx", strlen("net_rx")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->net_rx = out_data;
PRINTM(MMSG, "net_rx = %d\n", params->net_rx);
} else if (strncmp(line, "ext_scan", strlen("ext_scan")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->ext_scan = out_data;
PRINTM(MMSG, "ext_scan = %d\n", params->ext_scan);
} else if (strncmp(line, "ps_mode", strlen("ps_mode")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->ps_mode = out_data;
PRINTM(MMSG, "ps_mode = %d\n", params->ps_mode);
} else if (strncmp(line, "p2a_scan", strlen("p2a_scan")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->p2a_scan = out_data;
PRINTM(MMSG, "p2a_scan = %d\n", params->p2a_scan);
} else if (strncmp(line, "scan_chan_gap",
strlen("scan_chan_gap")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->scan_chan_gap = out_data;
PRINTM(MMSG, "scan_chan_gap = %d\n",
params->scan_chan_gap);
} else if (strncmp(line, "sched_scan", strlen("sched_scan")) ==
0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->sched_scan = out_data;
PRINTM(MMSG, "sched_scan = %d\n", params->sched_scan);
} else if (strncmp(line, "max_tx_buf", strlen("max_tx_buf")) ==
0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->max_tx_buf = out_data;
PRINTM(MMSG, "max_tx_buf = %d\n", params->max_tx_buf);
}
#if defined(SDIO)
else if (strncmp(line, "intmode", strlen("intmode")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_INTMODE);
else
moal_extflg_clear(handle, EXT_INTMODE);
PRINTM(MMSG, "intmode %s\n",
moal_extflg_isset(handle, EXT_INTMODE) ? "on" :
"off");
} else if (strncmp(line, "gpiopin", strlen("gpiopin")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->gpiopin = out_data;
PRINTM(MMSG, "gpiopin = %d\n", params->gpiopin);
}
#endif
else if (strncmp(line, "pm_keep_power",
strlen("pm_keep_power")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_PM_KEEP_POWER);
else
moal_extflg_clear(handle, EXT_PM_KEEP_POWER);
PRINTM(MMSG, "pm_keep_power %s\n",
moal_extflg_isset(handle, EXT_PM_KEEP_POWER) ?
"on" :
"off");
}
#if defined(SDIO) && defined(SDIO_SUSPEND_RESUME)
else if (strncmp(line, "shutdown_hs", strlen("shutdown_hs")) ==
0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_SHUTDOWN_HS);
else
moal_extflg_clear(handle, EXT_SHUTDOWN_HS);
PRINTM(MMSG, "shutdown_hs %s\n",
moal_extflg_isset(handle, EXT_SHUTDOWN_HS) ?
"on" :
"off");
}
#endif
#if defined(STA_SUPPORT)
else if (strncmp(line, "cfg_11d", strlen("cfg_11d")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->cfg_11d = out_data;
PRINTM(MMSG, "cfg_11d = %d\n", params->cfg_11d);
}
#endif
#if defined(SDIO)
else if (strncmp(line, "slew_rate", strlen("slew_rate")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->slew_rate = out_data;
PRINTM(MMSG, "slew_rate = %d\n", params->slew_rate);
}
#endif
else if (strncmp(line, "dpd_data_cfg",
strlen("dpd_data_cfg")) == 0) {
if (parse_line_read_string(line, &out_str) !=
MLAN_STATUS_SUCCESS)
goto err;
woal_dup_string(&params->dpd_data_cfg, out_str);
PRINTM(MMSG, "dpd_data_cfg=%s\n", params->dpd_data_cfg);
} else if (strncmp(line, "init_cfg", strlen("init_cfg")) == 0) {
if (parse_line_read_string(line, &out_str) !=
MLAN_STATUS_SUCCESS)
goto err;
woal_dup_string(&params->init_cfg, out_str);
PRINTM(MMSG, "init_cfg=%s\n", params->init_cfg);
} else if (strncmp(line, "cal_data_cfg",
strlen("cal_data_cfg")) == 0) {
if (parse_line_read_string(line, &out_str) !=
MLAN_STATUS_SUCCESS)
goto err;
woal_dup_string(&params->cal_data_cfg, out_str);
PRINTM(MMSG, "cal_data_cfg=%s\n", params->cal_data_cfg);
} else if (strncmp(line, "txpwrlimit_cfg",
strlen("txpwrlimit_cfg")) == 0) {
if (parse_line_read_string(line, &out_str) !=
MLAN_STATUS_SUCCESS)
goto err;
woal_dup_string(&params->txpwrlimit_cfg, out_str);
PRINTM(MMSG, "txpwrlimit_cfg=%s\n",
params->txpwrlimit_cfg);
} else if (strncmp(line, "cntry_txpwr",
strlen("cntry_txpwr")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->cntry_txpwr = out_data;
PRINTM(MMSG, "cntry_txpwr = %d\n", params->cntry_txpwr);
} else if (strncmp(line, "init_hostcmd_cfg",
strlen("init_hostcmd_cfg")) == 0) {
if (parse_line_read_string(line, &out_str) !=
MLAN_STATUS_SUCCESS)
goto err;
woal_dup_string(&params->init_hostcmd_cfg, out_str);
PRINTM(MMSG, "init_hostcmd_cfg=%s\n",
params->init_hostcmd_cfg);
} else if (strncmp(line, "band_steer_cfg",
strlen("band_steer_cfg")) == 0) {
if (parse_line_read_string(line, &out_str) !=
MLAN_STATUS_SUCCESS)
goto err;
woal_dup_string(&params->band_steer_cfg, out_str);
PRINTM(MMSG, "band_steer_cfg=%s\n",
params->band_steer_cfg);
} else if (strncmp(line, "cfg80211_wext",
strlen("cfg80211_wext")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->cfg80211_wext = out_data;
PRINTM(MMSG, "cfg80211_wext=0x%x\n",
params->cfg80211_wext);
}
#if defined(USB)
else if (IS_USB(handle->card_type) &&
strncmp(line, "skip_fwdnld", strlen("skip_fwdnld")) ==
0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_SKIP_FWDNLD);
else
moal_extflg_clear(handle, EXT_SKIP_FWDNLD);
PRINTM(MMSG, "skip_fwdnld %s\n",
moal_extflg_isset(handle, EXT_SKIP_FWDNLD) ?
"on" :
"off");
}
#endif
else if (strncmp(line, "wq_sched_prio",
strlen("wq_sched_prio")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->wq_sched_prio = out_data;
PRINTM(MMSG, "wq_sched_prio=0x%x\n",
params->wq_sched_prio);
} else if (strncmp(line, "wq_sched_policy",
strlen("wq_sched_policy")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->wq_sched_policy = out_data;
PRINTM(MMSG, "wq_sched_policy=0x%x\n",
params->wq_sched_policy);
} else if (strncmp(line, "rx_work", strlen("rx_work")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->rx_work = out_data;
PRINTM(MMSG, "rx_work=0x%x\n", params->rx_work);
} else if (strncmp(line, "aggrctrl", strlen("aggrctrl")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_AGGR_CTRL);
else
moal_extflg_clear(handle, EXT_AGGR_CTRL);
PRINTM(MMSG, "aggrctrl %s\n",
moal_extflg_isset(handle, EXT_AGGR_CTRL) ?
"on" :
"off");
}
#ifdef USB
else if (IS_USB(handle->card_type) &&
strncmp(line, "usb_aggr", strlen("usb_aggr")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->usb_aggr = out_data;
PRINTM(MMSG, "usb_aggr=0x%x\n", params->usb_aggr);
}
#endif
#ifdef PCIE
else if (IS_PCIE(handle->card_type) &&
strncmp(line, "pcie_int_mode",
strlen("pcie_int_mode")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->pcie_int_mode = out_data;
PRINTM(MMSG, "pcie_int_mode=%d\n",
params->pcie_int_mode);
} else if (IS_PCIE(handle->card_type) &&
strncmp(line, "ring_size", strlen("ring_size")) ==
0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->ring_size = out_data;
PRINTM(MMSG, "ring_size=%d\n", params->ring_size);
}
#endif
else if (strncmp(line, "low_power_mode_enable",
strlen("low_power_mode_enable")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_LOW_PW_MODE);
else
moal_extflg_clear(handle, EXT_LOW_PW_MODE);
PRINTM(MMSG, "low_power_mode_enable %s\n",
moal_extflg_isset(handle, EXT_LOW_PW_MODE) ?
"on" :
"off");
} else if (strncmp(line, "wakelock_timeout",
strlen("wakelock_timeout")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->wakelock_timeout = out_data;
PRINTM(MMSG, "wakelock_timeout=%d\n",
params->wakelock_timeout);
} else if (strncmp(line, "dev_cap_mask",
strlen("dev_cap_mask")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->dev_cap_mask = out_data;
PRINTM(MMSG, "dev_cap_mask=%d\n", params->dev_cap_mask);
}
#ifdef SDIO
else if (strncmp(line, "sdio_rx_aggr",
strlen("sdio_rx_aggr")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_SDIO_RX_AGGR);
else
moal_extflg_clear(handle, EXT_SDIO_RX_AGGR);
PRINTM(MMSG, "sdio_rx_aggr %s\n",
moal_extflg_isset(handle, EXT_SDIO_RX_AGGR) ?
"on" :
"off");
}
#endif
#if defined(SD8997) || defined(PCIE8997) || defined(USB8997) || \
defined(SD8977) || defined(SD8987) || defined(SD9098) || \
defined(USB9098) || defined(PCIE9098) || defined(SD9097) || \
defined(USB9097) || defined(PCIE9097) || defined(SD8978) || \
defined(SD9177)
else if (strncmp(line, "pmic", strlen("pmic")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_PMIC);
else
moal_extflg_clear(handle, EXT_PMIC);
PRINTM(MMSG, "pmic %s\n",
moal_extflg_isset(handle, EXT_PMIC) ? "on" :
"off");
}
#endif
else if (strncmp(line, "antcfg", strlen("antcfg")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->antcfg = out_data;
PRINTM(MMSG, "antcfg=%d\n", params->antcfg);
} else if (strncmp(line, "uap_oper_ctrl",
strlen("uap_oper_ctrl")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->uap_oper_ctrl = out_data;
PRINTM(MMSG, "uap_oper_ctrl=%d\n",
params->uap_oper_ctrl);
} else if (strncmp(line, "hs_wake_interval",
strlen("hs_wake_interval")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->hs_wake_interval = out_data;
PRINTM(MMSG, "hs_wake_interval=%d\n",
params->hs_wake_interval);
} else if (strncmp(line, "indication_gpio",
strlen("indication_gpio")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->indication_gpio = out_data;
PRINTM(MMSG, "indication_gpio=%d\n",
params->indication_gpio);
} else if (strncmp(line, "disconnect_on_suspend",
strlen("disconnect_on_suspend")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle,
EXT_DISCONNECT_ON_SUSPEND);
else
moal_extflg_clear(handle,
EXT_DISCONNECT_ON_SUSPEND);
PRINTM(MMSG, "disconnect_on_suspend %s\n",
moal_extflg_isset(handle,
EXT_DISCONNECT_ON_SUSPEND) ?
"on" :
"off");
} else if (strncmp(line, "hs_mimo_switch",
strlen("hs_mimo_switch")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_HS_MIMO_SWITCH);
else
moal_extflg_clear(handle, EXT_HS_MIMO_SWITCH);
PRINTM(MMSG, "hs_mimo_switch %s\n",
moal_extflg_isset(handle, EXT_HS_MIMO_SWITCH) ?
"on" :
"off");
} else if (strncmp(line, "indrstcfg", strlen("indrstcfg")) ==
0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->indrstcfg = out_data;
PRINTM(MMSG, "indrstcfg=%d\n", params->indrstcfg);
} else if (strncmp(line, "fixed_beacon_buffer",
strlen("fixed_beacon_buffer")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_FIX_BCN_BUF);
else
moal_extflg_clear(handle, EXT_FIX_BCN_BUF);
PRINTM(MMSG, "fixed_beacon_buffer %s\n",
moal_extflg_isset(handle, EXT_FIX_BCN_BUF) ?
"on" :
"off");
}
#ifdef WIFI_DIRECT_SUPPORT
else if (strncmp(line, "GoAgeoutTime",
strlen("GoAgeoutTime")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->GoAgeoutTime = out_data;
PRINTM(MMSG, "GoAgeoutTime=%d\n", params->GoAgeoutTime);
}
#endif
else if (strncmp(line, "gtk_rekey_offload",
strlen("gtk_rekey_offload")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->gtk_rekey_offload = out_data;
PRINTM(MMSG, "gtk_rekey_offload=%d\n",
params->gtk_rekey_offload);
} else if (strncmp(line, "multi_dtim", strlen("multi_dtim")) ==
0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->multi_dtim = out_data;
PRINTM(MMSG, "multi_dtim=%d\n", params->multi_dtim);
} else if (strncmp(line, "inact_tmo", strlen("inact_tmo")) ==
0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->inact_tmo = out_data;
PRINTM(MMSG, "inact_tmo=%d\n", params->inact_tmo);
} else if (strncmp(line, "napi", strlen("napi")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_NAPI);
else
moal_extflg_clear(handle, EXT_NAPI);
PRINTM(MMSG, "napi %s\n",
moal_extflg_isset(handle, EXT_NAPI) ? "on" :
"off");
} else if (strncmp(line, "tx_work", strlen("tx_work")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_TX_WORK);
else
moal_extflg_clear(handle, EXT_TX_WORK);
PRINTM(MMSG, "tx_work %s\n",
moal_extflg_isset(handle, EXT_TX_WORK) ? "on" :
"off");
} else if (strncmp(line, "rps", strlen("rps")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_RPS);
else
moal_extflg_clear(handle, EXT_RPS);
PRINTM(MMSG, "rps %s\n",
moal_extflg_isset(handle, EXT_RPS) ? "on" :
"off");
} else if (strncmp(line, "tx_skb_clone",
strlen("tx_skb_clone")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_TX_SKB_CLONE);
else
moal_extflg_clear(handle, EXT_TX_SKB_CLONE);
PRINTM(MMSG, "tx_skb_clone %s\n",
moal_extflg_isset(handle, EXT_TX_SKB_CLONE) ?
"on" :
"off");
} else if (strncmp(line, "pmqos", strlen("pmqos")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_PMQOS);
else
moal_extflg_clear(handle, EXT_PMQOS);
PRINTM(MMSG, "pmqos %s\n",
moal_extflg_isset(handle, EXT_PMQOS) ? "on" :
"off");
}
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
else if (strncmp(line, "dfs_offload", strlen("dfs_offload")) ==
0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_DFS_OFFLOAD);
else
moal_extflg_clear(handle, EXT_DFS_OFFLOAD);
PRINTM(MMSG, "dfs_offload %s\n",
moal_extflg_isset(handle, EXT_DFS_OFFLOAD) ?
"on" :
"off");
}
#endif
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
else if (strncmp(line, "disable_regd_by_driver",
strlen("disable_regd_by_driver")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle,
EXT_DISABLE_REGD_BY_DRIVER);
else
moal_extflg_clear(handle,
EXT_DISABLE_REGD_BY_DRIVER);
PRINTM(MMSG, "reg domain set by driver=%s\n",
moal_extflg_isset(handle,
EXT_DISABLE_REGD_BY_DRIVER) ?
"enable" :
"disable");
} else if (strncmp(line, "reg_alpha2", strlen("reg_alpha2")) ==
0) {
if (parse_line_read_string(line, &out_str) !=
MLAN_STATUS_SUCCESS)
goto err;
woal_dup_string(&params->reg_alpha2, out_str);
PRINTM(MMSG, "reg_alpha2=%s\n", params->reg_alpha2);
}
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
else if (strncmp(line, "country_ie_ignore",
strlen("country_ie_ignore")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_COUNTRY_IE_IGNORE);
else
moal_extflg_clear(handle,
EXT_COUNTRY_IE_IGNORE);
PRINTM(MMSG, "country_ie_ignore=%s\n",
moal_extflg_isset(handle,
EXT_COUNTRY_IE_IGNORE) ?
"on" :
"off");
} else if (strncmp(line, "beacon_hints",
strlen("beacon_hints")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_BEACON_HINTS);
else
moal_extflg_clear(handle, EXT_BEACON_HINTS);
PRINTM(MMSG, "beacon_hints=%s\n",
moal_extflg_isset(handle, EXT_BEACON_HINTS) ?
"enable" :
"disable");
}
#endif
#endif
#ifdef UAP_SUPPORT
else if (strncmp(line, "uap_max_sta", strlen("uap_max_sta")) ==
0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->uap_max_sta = out_data;
PRINTM(MMSG, "uap_max_sta=%d\n", params->uap_max_sta);
} else if (strncmp(line, "wacp_mode", strlen("wacp_mode")) ==
0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->wacp_mode = out_data;
PRINTM(MMSG, "wacp_moe=%d\n", params->wacp_mode);
}
#endif
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)
else if (strncmp(line, "host_mlme", strlen("host_mlme")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_HOST_MLME);
else
moal_extflg_clear(handle, EXT_HOST_MLME);
PRINTM(MMSG, "host_mlme=%s\n",
moal_extflg_isset(handle, EXT_HOST_MLME) ?
"enable" :
"disable");
}
#endif
#endif
else if (strncmp(line, "dfs53cfg", strlen("dfs53cfg")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
params->dfs53cfg = out_data;
PRINTM(MMSG, "dfs53cfg= %d\n", params->dfs53cfg);
}
}
if (end)
return ret;
err:
PRINTM(MMSG, "Invalid line: %s\n", line);
ret = MLAN_STATUS_FAILURE;
return ret;
}
/**
* @brief This function initialize module parameter
*
* @param handle A pointer to moal_handle structure
* @param params A pointer to moal_mod_para structure
*
* @return N/A
*/
static void woal_setup_module_param(moal_handle *handle, moal_mod_para *params)
{
if (hw_test)
moal_extflg_set(handle, EXT_HW_TEST);
#ifdef CONFIG_OF
if (dts_enable)
moal_extflg_set(handle, EXT_DTS_ENABLE);
#endif
woal_dup_string(&handle->params.fw_name, fw_name);
if (params && params->fw_name)
woal_dup_string(&handle->params.fw_name, params->fw_name);
if (req_fw_nowait)
moal_extflg_set(handle, EXT_REQ_FW_NOWAIT);
handle->params.fw_reload = fw_reload;
if (fw_reload == FW_RELOAD_WITH_EMULATION) {
if (!IS_USB(handle->card_type))
handle->params.fw_reload = 0;
else
fw_reload = 0;
}
if (params)
handle->params.fw_reload = params->fw_reload;
if (fw_serial)
moal_extflg_set(handle, EXT_FW_SERIAL);
woal_dup_string(&handle->params.mac_addr, mac_addr);
if (params && params->mac_addr)
woal_dup_string(&handle->params.mac_addr, params->mac_addr);
#ifdef MFG_CMD_SUPPORT
handle->params.mfg_mode = mfg_mode;
if (params)
handle->params.mfg_mode = params->mfg_mode;
#endif
handle->params.drv_mode = drv_mode;
if (params)
handle->params.drv_mode = params->drv_mode;
#ifdef STA_SUPPORT
handle->params.max_sta_bss = max_sta_bss;
woal_dup_string(&handle->params.sta_name, sta_name);
if (params) {
handle->params.max_sta_bss = params->max_sta_bss;
woal_dup_string(&handle->params.sta_name, params->sta_name);
}
#endif /* STA_SUPPORT */
#ifdef UAP_SUPPORT
handle->params.max_uap_bss = max_uap_bss;
woal_dup_string(&handle->params.uap_name, uap_name);
handle->params.uap_max_sta = uap_max_sta;
handle->params.wacp_mode = wacp_mode;
if (params) {
handle->params.max_uap_bss = params->max_uap_bss;
woal_dup_string(&handle->params.uap_name, params->uap_name);
handle->params.uap_max_sta = params->uap_max_sta;
handle->params.wacp_mode = params->wacp_mode;
}
#endif /* UAP_SUPPORT */
#ifdef WIFI_DIRECT_SUPPORT
handle->params.max_wfd_bss = max_wfd_bss;
woal_dup_string(&handle->params.wfd_name, wfd_name);
if (params) {
handle->params.max_wfd_bss = params->max_wfd_bss;
woal_dup_string(&handle->params.wfd_name, params->wfd_name);
}
#if defined(STA_CFG80211) && defined(UAP_CFG80211)
handle->params.max_vir_bss = max_vir_bss;
if (params)
handle->params.max_vir_bss = params->max_vir_bss;
#endif
#endif /* WIFI_DIRECT_SUPPORT */
handle->params.auto_ds = auto_ds;
if (params)
handle->params.auto_ds = params->auto_ds;
handle->params.net_rx = net_rx;
if (params)
handle->params.net_rx = params->net_rx;
handle->params.ext_scan = ext_scan;
if (params)
handle->params.ext_scan = params->ext_scan;
handle->params.ps_mode = ps_mode;
handle->params.p2a_scan = p2a_scan;
handle->params.scan_chan_gap = scan_chan_gap;
handle->params.sched_scan = sched_scan;
handle->params.max_tx_buf = max_tx_buf;
if (params) {
handle->params.ps_mode = params->ps_mode;
handle->params.max_tx_buf = params->max_tx_buf;
handle->params.p2a_scan = params->p2a_scan;
handle->params.scan_chan_gap = params->scan_chan_gap;
handle->params.sched_scan = params->sched_scan;
}
#if defined(SDIO)
if (intmode)
moal_extflg_set(handle, EXT_INTMODE);
handle->params.gpiopin = gpiopin;
if (params)
handle->params.gpiopin = params->gpiopin;
#endif
if (pm_keep_power)
moal_extflg_set(handle, EXT_PM_KEEP_POWER);
#if defined(SDIO) && defined(SDIO_SUSPEND_RESUME)
if (shutdown_hs)
moal_extflg_set(handle, EXT_SHUTDOWN_HS);
#endif
#if defined(STA_SUPPORT)
handle->params.cfg_11d = cfg_11d;
if (params)
handle->params.cfg_11d = params->cfg_11d;
#endif
#if defined(SDIO)
handle->params.slew_rate = slew_rate;
if (params)
handle->params.slew_rate = params->slew_rate;
#endif
woal_dup_string(&handle->params.dpd_data_cfg, dpd_data_cfg);
if (params)
woal_dup_string(&handle->params.dpd_data_cfg,
params->dpd_data_cfg);
woal_dup_string(&handle->params.init_cfg, init_cfg);
woal_dup_string(&handle->params.cal_data_cfg, cal_data_cfg);
if (params) {
woal_dup_string(&handle->params.init_cfg, params->init_cfg);
woal_dup_string(&handle->params.cal_data_cfg,
params->cal_data_cfg);
}
woal_dup_string(&handle->params.txpwrlimit_cfg, txpwrlimit_cfg);
if (params)
woal_dup_string(&handle->params.txpwrlimit_cfg,
params->txpwrlimit_cfg);
handle->params.cntry_txpwr = cntry_txpwr;
if (params)
handle->params.cntry_txpwr = params->cntry_txpwr;
woal_dup_string(&handle->params.init_hostcmd_cfg, init_hostcmd_cfg);
if (params)
woal_dup_string(&handle->params.init_hostcmd_cfg,
params->init_hostcmd_cfg);
woal_dup_string(&handle->params.band_steer_cfg, band_steer_cfg);
if (params)
woal_dup_string(&handle->params.band_steer_cfg,
params->band_steer_cfg);
handle->params.cfg80211_wext = cfg80211_wext;
if (params)
handle->params.cfg80211_wext = params->cfg80211_wext;
#if defined(USB)
if (skip_fwdnld)
moal_extflg_set(handle, EXT_SKIP_FWDNLD);
#endif
handle->params.wq_sched_prio = wq_sched_prio;
handle->params.wq_sched_policy = wq_sched_policy;
handle->params.rx_work = rx_work;
if (params) {
handle->params.wq_sched_prio = params->wq_sched_prio;
handle->params.wq_sched_policy = params->wq_sched_policy;
handle->params.rx_work = params->rx_work;
}
if (aggrctrl)
moal_extflg_set(handle, EXT_AGGR_CTRL);
#ifdef USB
handle->params.usb_aggr = usb_aggr;
if (params)
handle->params.usb_aggr = params->usb_aggr;
#endif
#ifdef PCIE
handle->params.pcie_int_mode = pcie_int_mode;
if (params)
handle->params.pcie_int_mode = params->pcie_int_mode;
handle->params.ring_size = ring_size;
if (params)
handle->params.ring_size = params->ring_size;
#endif /* PCIE */
if (low_power_mode_enable)
moal_extflg_set(handle, EXT_LOW_PW_MODE);
handle->params.wakelock_timeout = wakelock_timeout;
if (params)
handle->params.wakelock_timeout = params->wakelock_timeout;
handle->params.dev_cap_mask = dev_cap_mask;
if (params)
handle->params.dev_cap_mask = params->dev_cap_mask;
#ifdef SDIO
if (sdio_rx_aggr)
moal_extflg_set(handle, EXT_SDIO_RX_AGGR);
#endif
#if defined(SD8997) || defined(PCIE8997) || defined(USB8997) || \
defined(SD8977) || defined(SD8987) || defined(SD9098) || \
defined(USB9098) || defined(PCIE9098) || defined(SD9097) || \
defined(USB9097) || defined(PCIE9097) || defined(SD8978) || \
defined(SD9177)
if (pmic)
moal_extflg_set(handle, EXT_PMIC);
#endif
handle->params.antcfg = antcfg;
if (params)
handle->params.antcfg = params->antcfg;
handle->params.uap_oper_ctrl = uap_oper_ctrl;
if (params)
handle->params.uap_oper_ctrl = params->uap_oper_ctrl;
handle->params.hs_wake_interval = hs_wake_interval;
handle->params.indication_gpio = indication_gpio;
if (params) {
handle->params.hs_wake_interval = params->hs_wake_interval;
handle->params.indication_gpio = params->indication_gpio;
}
if (disconnect_on_suspend)
moal_extflg_set(handle, EXT_DISCONNECT_ON_SUSPEND);
if (hs_mimo_switch)
moal_extflg_set(handle, EXT_HS_MIMO_SWITCH);
handle->params.indrstcfg = indrstcfg;
if (params)
handle->params.indrstcfg = params->indrstcfg;
if (fixed_beacon_buffer)
moal_extflg_set(handle, EXT_FIX_BCN_BUF);
#ifdef WIFI_DIRECT_SUPPORT
handle->params.GoAgeoutTime = GoAgeoutTime;
if (params)
handle->params.GoAgeoutTime = params->GoAgeoutTime;
#endif
handle->params.gtk_rekey_offload = gtk_rekey_offload;
if (params)
handle->params.gtk_rekey_offload = params->gtk_rekey_offload;
handle->params.multi_dtim = multi_dtim;
handle->params.inact_tmo = inact_tmo;
if (params) {
handle->params.multi_dtim = params->multi_dtim;
handle->params.inact_tmo = params->inact_tmo;
}
if (napi)
moal_extflg_set(handle, EXT_NAPI);
if (tx_work)
moal_extflg_set(handle, EXT_TX_WORK);
if (rps)
moal_extflg_set(handle, EXT_RPS);
if (tx_skb_clone)
moal_extflg_set(handle, EXT_TX_SKB_CLONE);
if (pmqos)
moal_extflg_set(handle, EXT_PMQOS);
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
if (dfs_offload)
moal_extflg_set(handle, EXT_DFS_OFFLOAD);
#endif
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)
if (host_mlme)
moal_extflg_set(handle, EXT_HOST_MLME);
#endif
#endif
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
if (disable_regd_by_driver)
moal_extflg_set(handle, EXT_DISABLE_REGD_BY_DRIVER);
if (reg_alpha2)
woal_dup_string(&handle->params.reg_alpha2, reg_alpha2);
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
if (country_ie_ignore)
moal_extflg_set(handle, EXT_COUNTRY_IE_IGNORE);
if (beacon_hints)
moal_extflg_set(handle, EXT_BEACON_HINTS);
#endif
#endif
if (params && params->reg_alpha2)
woal_dup_string(&handle->params.reg_alpha2, params->reg_alpha2);
if (params)
moal_memcpy_ext(handle, handle->params.ext_flgs,
params->ext_flgs, sizeof(params->ext_flgs),
sizeof(handle->params.ext_flgs));
/* do some special handle for MFG mode */
#ifdef MFG_CMD_SUPPORT
if (handle->params.mfg_mode) {
#if defined(STA_WEXT) || defined(UAP_WEXT)
handle->params.cfg80211_wext = STA_WEXT_MASK | UAP_WEXT_MASK;
#else
handle->params.cfg80211_wext = 0;
#endif
handle->params.drv_mode = DRV_MODE_STA;
}
#endif
if (dfs53cfg > DFS_W53_OLD) {
PRINTM(MERROR, "Invalid value for dfs53cfg !\n");
handle->params.dfs53cfg = DFS_W53_DEFAULT_FW;
} else {
handle->params.dfs53cfg = dfs53cfg;
if (params)
handle->params.dfs53cfg = params->dfs53cfg;
}
}
/**
* @brief This function free module parameter memory
*
* @param handle A pointer to moal_handle structure
*
* @return N/A
*/
void woal_free_module_param(moal_handle *handle)
{
moal_mod_para *params = &handle->params;
PRINTM(MMSG, "Free module params\n");
if (params->fw_name) {
kfree(params->fw_name);
params->fw_name = NULL;
}
if (params->mac_addr) {
kfree(params->mac_addr);
params->mac_addr = NULL;
}
#ifdef STA_SUPPORT
if (params->sta_name) {
kfree(params->sta_name);
params->sta_name = NULL;
}
#endif /* STA_SUPPORT */
#ifdef UAP_SUPPORT
if (params->uap_name) {
kfree(params->uap_name);
params->uap_name = NULL;
}
#endif /* UAP_SUPPORT */
#ifdef WIFI_DIRECT_SUPPORT
if (params->wfd_name) {
kfree(params->wfd_name);
params->wfd_name = NULL;
}
#endif /* WIFI_DIRECT_SUPPORT */
if (params->dpd_data_cfg) {
kfree(params->dpd_data_cfg);
params->dpd_data_cfg = NULL;
}
if (params->init_cfg) {
kfree(params->init_cfg);
params->init_cfg = NULL;
}
if (params->cal_data_cfg) {
kfree(params->cal_data_cfg);
params->cal_data_cfg = NULL;
}
if (params->txpwrlimit_cfg) {
kfree(params->txpwrlimit_cfg);
params->txpwrlimit_cfg = NULL;
}
if (params->init_hostcmd_cfg) {
kfree(params->init_hostcmd_cfg);
params->init_hostcmd_cfg = NULL;
}
if (params->band_steer_cfg) {
kfree(params->band_steer_cfg);
params->band_steer_cfg = NULL;
}
if (params->reg_alpha2) {
kfree(params->reg_alpha2);
params->reg_alpha2 = NULL;
}
}
/**
* @brief This function request module parameter data from user space
*
* @param handle A pointer to moal_handle structure
* @param mod_file A pointer to module parameter file path
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
static mlan_status woal_req_mod_param(moal_handle *handle, char *mod_file)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
struct device *dev = handle->hotplug_device;
if (dev == NULL) {
PRINTM(MERROR, "No device attached\n");
ret = MLAN_STATUS_FAILURE;
goto out;
}
ret = request_firmware(&handle->param_data, mod_file, dev);
if (ret < 0)
PRINTM(MERROR, "Request firmware: %s failed, error: %d\n",
mod_file, ret);
out:
return ret;
}
#ifdef CONFIG_OF
/**
* @brief This function read the initial parameter from device tress
*
* @param handle A pointer to moal_handle structure
*
* @return N/A
*/
void woal_init_from_dev_tree(void)
{
struct device_node *dt_node = NULL;
struct property *prop;
t_u32 data;
const char *string_data;
ENTER();
if (!dts_enable) {
PRINTM(MIOCTL, "DTS is disabled!");
return;
}
dt_node = of_find_node_by_name(NULL, "sdxxx-wlan");
if (!dt_node) {
LEAVE();
return;
}
for_each_property_of_node (dt_node, prop) {
if (!strncmp(prop->name, "drv_mode", strlen("drv_mode"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
PRINTM(MIOCTL, "drv_mode=0x%x\n", data);
drv_mode = data;
}
}
#ifdef DEBUG_LEVEL1
else if (!strncmp(prop->name, "drvdbg", strlen("drvdbg"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
PRINTM(MIOCTL, "drvdbg=0x%x\n", data);
drvdbg = data;
}
}
#endif
else if (!strncmp(prop->name, "dev_cap_mask",
strlen("dev_cap_mask"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
PRINTM(MIOCTL, "dev_cap_mask=0x%x\n", data);
dev_cap_mask = data;
}
} else if (!strncmp(prop->name, "hw_test", strlen("hw_test"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
PRINTM(MIOCTL, "hw_test=0x%x\n", data);
hw_test = data;
}
}
#if defined(SDIO)
else if (!strncmp(prop->name, "slew_rate",
strlen("slew_rate"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
PRINTM(MIOCTL, "slew_rate=0x%x\n", data);
slew_rate = data;
}
}
#endif
else if (!strncmp(prop->name, "tx_work", strlen("tx_work"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
PRINTM(MIOCTL, "tx_work=0x%x\n", data);
tx_work = data;
}
} else if (!strncmp(prop->name, "rps", strlen("rps"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
PRINTM(MIOCTL, "rps=0x%x\n", data);
rps = data;
}
} else if (!strncmp(prop->name, "tx_skb_clone",
strlen("tx_skb_clone"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
PRINTM(MIOCTL, "tx_skb_clone=0x%x\n", data);
tx_skb_clone = data;
}
} else if (!strncmp(prop->name, "pmqos", strlen("pmqos"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
PRINTM(MIOCTL, "pmqos=0x%x\n", data);
pmqos = data;
}
}
#ifdef MFG_CMD_SUPPORT
else if (!strncmp(prop->name, "mfg_mode", strlen("mfg_mode"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
PRINTM(MIOCTL, "mfg_mode=0x%x\n", data);
mfg_mode = data;
}
}
#endif
else if (!strncmp(prop->name, "mac_addr", strlen("mac_addr"))) {
if (!of_property_read_string(dt_node, prop->name,
&string_data)) {
mac_addr = (char *)string_data;
PRINTM(MIOCTL, "mac_addr=%s\n", mac_addr);
}
} else if (!strncmp(prop->name, "fw_name", strlen("fw_name"))) {
if (!of_property_read_string(dt_node, prop->name,
&string_data)) {
fw_name = (char *)string_data;
PRINTM(MIOCTL, "fw_name=%s\n", fw_name);
}
}
#if defined(STA_WEXT) || defined(UAP_WEXT)
else if (!strncmp(prop->name, "cfg80211_wext",
strlen("cfg80211_wext"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
PRINTM(MIOCTL, "cfg80211_wext=0x%x\n", data);
cfg80211_wext = data;
}
}
#endif
#ifdef STA_SUPPORT
else if (!strncmp(prop->name, "sta_name", strlen("sta_name"))) {
if (!of_property_read_string(dt_node, prop->name,
&string_data)) {
sta_name = (char *)string_data;
PRINTM(MIOCTL, "sta_name=%s\n", sta_name);
}
}
#endif
#ifdef WIFI_DIRECT_SUPPORT
else if (!strncmp(prop->name, "wfd_name", strlen("wfd_name"))) {
if (!of_property_read_string(dt_node, prop->name,
&string_data)) {
wfd_name = (char *)string_data;
PRINTM(MIOCTL, "wfd_name=%s\n", wfd_name);
}
}
#endif
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
else if (!strncmp(prop->name, "disable_regd_by_driver",
strlen("disable_regd_by_driver"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
PRINTM(MIOCTL, "disable_regd_by_driver=0x%x\n",
data);
disable_regd_by_driver = data;
}
} else if (!strncmp(prop->name, "reg_alpha2",
strlen("reg_alpha2"))) {
if (!of_property_read_string(dt_node, prop->name,
&string_data)) {
reg_alpha2 = (char *)string_data;
PRINTM(MIOCTL, "reg_alpha2=%s\n", reg_alpha2);
}
}
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
else if (!strncmp(prop->name, "country_ie_ignore",
strlen("country_ie_ignore"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
PRINTM(MIOCTL, "country_ie_ignore=0x%x\n",
data);
country_ie_ignore = data;
}
} else if (!strncmp(prop->name, "beacon_hints",
strlen("beacon_hints"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
PRINTM(MIOCTL, "beacon_hints=0x%x\n", data);
beacon_hints = data;
}
}
#endif
#endif
#ifdef WIFI_DIRECT_SUPPORT
#if defined(STA_CFG80211) && defined(UAP_CFG80211)
else if (!strncmp(prop->name, "max_vir_bss",
strlen("max_vir_bss"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
PRINTM(MIOCTL, "max_vir_bss=0x%x\n", data);
max_vir_bss = data;
}
}
#endif
#endif
else if (!strncmp(prop->name, "dpd_data_cfg",
strlen("dpd_data_cfg"))) {
if (!of_property_read_string(dt_node, prop->name,
&string_data)) {
dpd_data_cfg = (char *)string_data;
PRINTM(MIOCTL, "dpd_data_cfg=%s\n",
dpd_data_cfg);
}
} else if (!strncmp(prop->name, "init_cfg",
strlen("init_cfg"))) {
if (!of_property_read_string(dt_node, prop->name,
&string_data)) {
init_cfg = (char *)string_data;
PRINTM(MIOCTL, "init_cfg=%s\n", init_cfg);
}
} else if (!strncmp(prop->name, "cal_data_cfg",
strlen("cal_data_cfg"))) {
if (!of_property_read_string(dt_node, prop->name,
&string_data)) {
cal_data_cfg = (char *)string_data;
PRINTM(MIOCTL, "cal_data_cfg=%s\n",
cal_data_cfg);
}
} else if (!strncmp(prop->name, "txpwrlimit_cfg",
strlen("txpwrlimit_cfg"))) {
if (!of_property_read_string(dt_node, prop->name,
&string_data)) {
txpwrlimit_cfg = (char *)string_data;
PRINTM(MIOCTL, "txpwrlimit_cfg=%s\n",
txpwrlimit_cfg);
}
} else if (!strncmp(prop->name, "cntry_txpwr",
strlen("cntry_txpwr"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
cntry_txpwr = data;
PRINTM(MIOCTL, "cntry_txpwr=%d\n", cntry_txpwr);
}
} else if (!strncmp(prop->name, "init_hostcmd_cfg",
strlen("init_hostcmd_cfg"))) {
if (!of_property_read_string(dt_node, prop->name,
&string_data)) {
init_hostcmd_cfg = (char *)string_data;
PRINTM(MIOCTL, "init_hostcmd_cfg=%s\n",
init_hostcmd_cfg);
}
} else if (!strncmp(prop->name, "band_steer_cfg",
strlen("band_steer_cfg"))) {
if (!of_property_read_string(dt_node, prop->name,
&string_data)) {
band_steer_cfg = (char *)string_data;
PRINTM(MIOCTL, "band_steer_cfg=%s\n",
band_steer_cfg);
}
} else if (!strncmp(prop->name, "pmic", strlen("pmic"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
pmic = data;
PRINTM(MIOCTL, "pmic=%d\n", pmic);
}
} else if (!strncmp(prop->name, "antcfg", strlen("antcfg"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
antcfg = data;
PRINTM(MIOCTL, "antcfg=%d\n", antcfg);
}
} else if (!strncmp(prop->name, "hs_wake_interval",
strlen("hs_wake_interval"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
hs_wake_interval = data;
PRINTM(MIOCTL, "hs_wake_interval=%d\n",
hs_wake_interval);
}
} else if (!strncmp(prop->name, "indication_gpio",
strlen("indication_gpio"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
indication_gpio = (t_u8)data;
PRINTM(MIOCTL, "indication_gpio=%d\n",
indication_gpio);
}
} else if (!strncmp(prop->name, "hs_mimo_switch",
strlen("hs_mimo_switch"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
hs_mimo_switch = data;
PRINTM(MIOCTL, "hs_mimo_switch=%d\n",
hs_mimo_switch);
}
}
#ifdef WIFI_DIRECT_SUPPORT
else if (!strncmp(prop->name, "GoAgeoutTime",
strlen("GoAgeoutTime"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
GoAgeoutTime = data;
PRINTM(MIOCTL, "GoAgeoutTime=%d\n",
GoAgeoutTime);
}
}
#endif
else if (!strncmp(prop->name, "indrstcfg",
strlen("indrstcfg"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
indrstcfg = data;
PRINTM(MIOCTL, "indrstcfg=%d\n", indrstcfg);
}
} else if (!strncmp(prop->name, "fixed_beacon_buffer",
strlen("fixed_beacon_buffer"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
fixed_beacon_buffer = data;
PRINTM(MIOCTL, "fixed_beacon_buffer=%d\n",
fixed_beacon_buffer);
}
} else if (!strncmp(prop->name, "multi_dtim",
strlen("multi_dtim"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
multi_dtim = data;
PRINTM(MIOCTL, "multi_dtim=%d\n", multi_dtim);
}
} else if (!strncmp(prop->name, "inact_tmo",
strlen("inact_tmo"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
inact_tmo = data;
PRINTM(MIOCTL, "inact_tmo=%d\n", inact_tmo);
}
}
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
else if (!strncmp(prop->name, "dfs_offload",
strlen("dfs_offload"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
dfs_offload = data;
PRINTM(MIOCTL, "dfs_offload=%d\n", dfs_offload);
}
}
#endif
else if (!strncmp(prop->name, "gtk_rekey_offload",
strlen("gtk_rekey_offload"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
gtk_rekey_offload = data;
PRINTM(MIOCTL, "gtk_rekey_offload=%d\n",
gtk_rekey_offload);
}
}
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)
else if (!strncmp(prop->name, "host_mlme",
strlen("host_mlme"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
PRINTM(MIOCTL, "host_mlme=0x%x\n", data);
host_mlme = data;
}
}
#endif
#endif
#ifdef UAP_SUPPORT
else if (!strncmp(prop->name, "uap_max_sta",
strlen("uap_max_sta"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
PRINTM(MERROR, "uap_max_sta=0x%x\n", data);
uap_max_sta = data;
}
} else if (!strncmp(prop->name, "wacp_mode",
strlen("wacp_mode"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
PRINTM(MERROR, "wacp_mode=0x%x\n", data);
wacp_mode = data;
}
}
#endif
else if (!strncmp(prop->name, "sched_scan",
strlen("sched_scan"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
PRINTM(MIOCTL, "sched_scan=%d\n", data);
sched_scan = data;
}
}
}
LEAVE();
return;
}
#endif
/**
* @brief This function check if configuration block id could be used
*
* @param handle A pointer to moal_handle structure
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
static mlan_status woal_validate_cfg_id(moal_handle *handle)
{
int i;
mlan_status ret = MLAN_STATUS_SUCCESS;
for (i = 0; i < MAX_MLAN_ADAPTER; i++) {
if (m_handle[i] == NULL || m_handle[i] == handle)
continue;
if (m_handle[i]->card_type == handle->card_type) {
if (m_handle[i]->blk_id == handle->blk_id) {
ret = MLAN_STATUS_FAILURE;
}
}
}
return ret;
}
/**
* @brief This function skip current configuration block
*
* @param data A pointer to buffer of module configuration file
* @param size Size of module configuration file
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
static mlan_status parse_skip_cfg_block(t_u8 *data, t_u32 size)
{
int end = 0;
t_u8 line[MAX_LINE_LEN];
while ((int)parse_cfg_get_line(data, size, line) != -1) {
if (strncmp(line, "}", strlen("}")) == 0) {
end = 1;
break;
}
if (end == 0 && strstr(line, "{") != NULL)
break;
}
return (end == 1) ? MLAN_STATUS_SUCCESS : MLAN_STATUS_FAILURE;
}
/**
* @brief This function handle fallback processing for invalid
* block id with same card type
*
* @param handle A pointer to moal_handle structure
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
static mlan_status woal_cfg_fallback_process(moal_handle *handle)
{
int i, blk_id = 0x7fffffff, idx = -1;
mlan_status ret = MLAN_STATUS_FAILURE;
PRINTM(MMSG, "Configuration block, fallback processing\n");
for (i = 0; i < MAX_MLAN_ADAPTER; i++) {
if (m_handle[i] == NULL || m_handle[i] == handle ||
m_handle[i]->card_type != handle->card_type)
continue;
/* use configuratino with lowest blk_id value */
if (m_handle[i]->blk_id >= 0 && m_handle[i]->blk_id <= blk_id) {
idx = i;
blk_id = m_handle[i]->blk_id;
}
}
if (idx >= 0 && idx < MAX_MLAN_ADAPTER) {
ret = MLAN_STATUS_SUCCESS;
handle->blk_id = m_handle[idx]->blk_id;
PRINTM(MMSG,
"Configuration fallback to, card_type: 0x%x, blk_id: 0x%x\n",
handle->card_type, handle->blk_id);
woal_setup_module_param(handle, &m_handle[idx]->params);
}
return ret;
}
/**
* @brief This function parse and initialize module parameters
*
* @param handle A pointer to moal_handle structure
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status woal_init_module_param(moal_handle *handle)
{
int no_match = 1;
t_u32 size, i, tbl_size;
t_u8 line[MAX_LINE_LEN], *data = NULL;
mlan_status ret = MLAN_STATUS_SUCCESS;
char *card_type = NULL, *blk_id = NULL;
memset(line, 0, MAX_LINE_LEN);
woal_setup_module_param(handle, NULL);
if (mod_para == NULL) {
PRINTM(MMSG, "No module param cfg file specified\n");
goto out;
}
if (woal_req_mod_param(handle, mod_para)) {
PRINTM(MERROR, "Failed to get module param file\n");
ret = MLAN_STATUS_FAILURE;
goto out;
}
tbl_size = sizeof(card_type_map_tbl) / sizeof(card_type_map_tbl[0]);
for (i = 0; i < tbl_size; i++)
if (handle->card_type == card_type_map_tbl[i].card_type)
break;
if (i >= tbl_size) {
PRINTM(MERROR, "No card type entry found for card type: 0x%x\n",
handle->card_type);
ret = MLAN_STATUS_FAILURE;
goto out;
}
PRINTM(MMSG, "%s: init module param from usr cfg\n",
card_type_map_tbl[i].name);
size = handle->param_data->size;
data = (t_u8 *)handle->param_data->data;
while ((int)parse_cfg_get_line(data, size, line) != -1) {
if (line[0] == '#')
continue;
if (strstr(line, "={")) {
ret = parse_line_read_card_info(line, &card_type,
&blk_id);
if (ret != MLAN_STATUS_SUCCESS)
goto out;
PRINTM(MINFO,
"Traverse, card_type: %s, config block: %s\n",
card_type, blk_id);
if (strcmp(card_type_map_tbl[i].name, card_type) == 0) {
/* parse config block id */
if (blk_id == NULL)
handle->blk_id = 0;
else
woal_atoi(&handle->blk_id, blk_id);
PRINTM(MINFO,
"Validation check, %s, config block: %d\n",
card_type, handle->blk_id);
/* check validation of config id */
if (woal_validate_cfg_id(handle) !=
MLAN_STATUS_SUCCESS) {
ret = parse_skip_cfg_block(data, size);
if (ret != MLAN_STATUS_SUCCESS) {
PRINTM(MMSG,
"failed to skip block\n");
goto out;
}
continue;
}
no_match = 0;
PRINTM(MMSG,
"card_type: %s, config block: %d\n",
card_type, handle->blk_id);
/* parse config block */
ret = parse_cfg_read_block(data, size, handle);
if (ret != MLAN_STATUS_SUCCESS)
goto out;
break;
}
}
}
if (no_match)
ret = woal_cfg_fallback_process(handle);
out:
if (handle->param_data) {
release_firmware(handle->param_data);
/* rewind pos */
parse_cfg_get_line(NULL, 0, NULL);
}
if (ret != MLAN_STATUS_SUCCESS) {
PRINTM(MERROR, "Invalid block: %s\n", line);
woal_free_module_param(handle);
woal_setup_module_param(handle, NULL);
}
return ret;
}
module_param(mod_para, charp, 0);
MODULE_PARM_DESC(mod_para, "Module parameters configuration file");
module_param(hw_test, int, 0660);
MODULE_PARM_DESC(hw_test, "0: Disable hardware test; 1: Enable hardware test");
#ifdef CONFIG_OF
module_param(dts_enable, int, 0);
MODULE_PARM_DESC(dts_enable, "0: Disable DTS; 1: Enable DTS");
#endif
module_param(fw_name, charp, 0660);
MODULE_PARM_DESC(fw_name, "Firmware name");
module_param(req_fw_nowait, int, 0);
MODULE_PARM_DESC(
req_fw_nowait,
"0: Use request_firmware API; 1: Use request_firmware_nowait API");
module_param(fw_reload, int, 0);
MODULE_PARM_DESC(fw_reload,
"0: disable fw_reload; 1: enable fw reload feature");
module_param(fw_serial, int, 0);
MODULE_PARM_DESC(
fw_serial,
"0: support parallel download FW; 1: support serial download FW");
module_param(mac_addr, charp, 0660);
MODULE_PARM_DESC(mac_addr, "MAC address");
#ifdef MFG_CMD_SUPPORT
module_param(mfg_mode, int, 0660);
MODULE_PARM_DESC(mfg_mode,
"0: Download normal firmware; 1: Download MFG firmware");
#endif /* MFG_CMD_SUPPORT */
module_param(drv_mode, int, 0660);
MODULE_PARM_DESC(drv_mode, "Bit 0: STA; Bit 1: uAP; Bit 2: WIFIDIRECT");
#ifdef STA_SUPPORT
module_param(max_sta_bss, int, 0);
MODULE_PARM_DESC(max_sta_bss, "Number of STA interfaces (1)");
module_param(sta_name, charp, 0);
MODULE_PARM_DESC(sta_name, "STA interface name");
#endif /* STA_SUPPORT */
#ifdef UAP_SUPPORT
module_param(max_uap_bss, int, 0);
MODULE_PARM_DESC(max_uap_bss, "Number of uAP interfaces (1)");
module_param(uap_name, charp, 0);
MODULE_PARM_DESC(uap_name, "uAP interface name");
#endif /* UAP_SUPPORT */
#ifdef WIFI_DIRECT_SUPPORT
module_param(max_wfd_bss, int, 0);
MODULE_PARM_DESC(max_wfd_bss, "Number of WIFIDIRECT interfaces (1)");
module_param(wfd_name, charp, 0);
MODULE_PARM_DESC(wfd_name, "WIFIDIRECT interface name");
#if defined(STA_CFG80211) && defined(UAP_CFG80211)
module_param(max_vir_bss, int, 0);
MODULE_PARM_DESC(max_vir_bss, "Number of Virtual interfaces (0)");
#endif
#endif /* WIFI_DIRECT_SUPPORT */
#ifdef DEBUG_LEVEL1
module_param(drvdbg, uint, 0660);
MODULE_PARM_DESC(drvdbg, "Driver debug");
#endif /* DEBUG_LEVEL1 */
module_param(auto_ds, int, 0660);
MODULE_PARM_DESC(
auto_ds,
"0: MLAN default; 1: Enable auto deep sleep; 2: Disable auto deep sleep");
module_param(ext_scan, int, 0660);
MODULE_PARM_DESC(
ext_scan,
"0: MLAN default; 1: Enable Extended Scan; 2: Enable Enhanced Extended Scan");
module_param(ps_mode, int, 0660);
MODULE_PARM_DESC(
ps_mode,
"0: MLAN default; 1: Enable IEEE PS mode; 2: Disable IEEE PS mode");
module_param(p2a_scan, int, 0660);
MODULE_PARM_DESC(
p2a_scan,
"0: MLAN default; 1: Enable passive to active scan for DFS channel; 2: Disable passive to active scan for DFS channel");
module_param(scan_chan_gap, int, 0660);
MODULE_PARM_DESC(
scan_chan_gap,
"Time gap between two scans in milliseconds when connected to AP(max value 500ms)");
module_param(sched_scan, int, 0);
MODULE_PARM_DESC(sched_scan,
"0: disable sched_scan; 1: enable sched_scan default");
module_param(max_tx_buf, int, 0);
MODULE_PARM_DESC(max_tx_buf, "Maximum Tx buffer size (2048/4096/8192)");
#if defined(SDIO)
module_param(intmode, int, 0);
MODULE_PARM_DESC(intmode, "0: INT_MODE_SDIO, 1: INT_MODE_GPIO");
module_param(gpiopin, int, 0);
MODULE_PARM_DESC(gpiopin, "255:new GPIO int mode, other vlue: gpio pin number");
#endif
module_param(pm_keep_power, int, 0);
MODULE_PARM_DESC(pm_keep_power, "1: PM keep power; 0: PM no power");
#ifdef SDIO_SUSPEND_RESUME
module_param(shutdown_hs, int, 0);
MODULE_PARM_DESC(shutdown_hs,
"1: Enable HS when shutdown; 0: No HS when shutdown");
#endif
#if defined(STA_SUPPORT)
module_param(cfg_11d, int, 0);
MODULE_PARM_DESC(cfg_11d,
"0: MLAN default; 1: Enable 802.11d; 2: Disable 802.11d");
#endif
#if defined(SDIO)
module_param(slew_rate, int, 0);
MODULE_PARM_DESC(
slew_rate,
"0:has the slowest slew rate, then 01, then 02, and 03 has the highest slew rate");
#endif
module_param(tx_work, uint, 0660);
MODULE_PARM_DESC(tx_work, "1: Enable tx_work; 0: Disable tx_work");
module_param(rps, uint, 0660);
MODULE_PARM_DESC(rps, "1: Enable rps; 0: Disable rps");
module_param(tx_skb_clone, uint, 0660);
MODULE_PARM_DESC(tx_skb_clone,
"1: Enable tx_skb_clone; 0: Disable tx_skb_clone");
module_param(pmqos, uint, 0660);
MODULE_PARM_DESC(pmqos, "1: Enable pmqos; 0: Disable pmqos");
module_param(dpd_data_cfg, charp, 0);
MODULE_PARM_DESC(dpd_data_cfg, "DPD data file name");
module_param(init_cfg, charp, 0);
MODULE_PARM_DESC(init_cfg, "Init config file name");
module_param(cal_data_cfg, charp, 0);
MODULE_PARM_DESC(cal_data_cfg, "Calibration data file name");
module_param(txpwrlimit_cfg, charp, 0);
MODULE_PARM_DESC(txpwrlimit_cfg,
"Set configuration data of Tx power limitation");
module_param(cntry_txpwr, int, 0);
MODULE_PARM_DESC(
cntry_txpwr,
"0: disable (default), 1: enable set country txpower table 2: enable set country rgpower table");
module_param(init_hostcmd_cfg, charp, 0);
MODULE_PARM_DESC(init_hostcmd_cfg, "Init hostcmd file name");
module_param(band_steer_cfg, charp, 0);
MODULE_PARM_DESC(band_steer_cfg, "band steer cfg file name");
module_param(cfg80211_wext, int, 0660);
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
MODULE_PARM_DESC(
cfg80211_wext,
"Bit 0: STA WEXT Bit 1: UAP WEXT Bit 2: STA CFG80211 Bit 3: UAP CFG80211");
#else
MODULE_PARM_DESC(cfg80211_wext, "Bit 0: STA WEXT Bit 1: UAP WEXT Bit 2");
#endif
#if defined(USB)
module_param(skip_fwdnld, int, 0);
MODULE_PARM_DESC(skip_fwdnld, "0: Enable FW download; 1: Disable FW download");
#endif
module_param(wq_sched_prio, int, 0);
module_param(wq_sched_policy, int, 0);
MODULE_PARM_DESC(wq_sched_prio, "Priority of work queue");
MODULE_PARM_DESC(
wq_sched_policy,
"0: SCHED_NORMAL; 1: SCHED_FIFO; 2: SCHED_RR; 3: SCHED_BATCH; 5: SCHED_IDLE");
module_param(rx_work, int, 0);
MODULE_PARM_DESC(
rx_work,
"0: default; 1: Enable rx_work_queue; 2: Disable rx_work_queue");
module_param(aggrctrl, int, 0);
MODULE_PARM_DESC(aggrctrl,
"1: Enable Tx aggregation; 0: Disable Tx aggregation");
#ifdef USB
module_param(usb_aggr, int, 0);
MODULE_PARM_DESC(usb_aggr,
"0: MLAN default; 1: Enable USB aggr; 2: Disable USB aggr");
#endif
#ifdef PCIE
module_param(ring_size, int, 0);
MODULE_PARM_DESC(ring_size,
"adma dma ring size: 32/64/128/256/512, default 128");
module_param(pcie_int_mode, int, 0);
MODULE_PARM_DESC(pcie_int_mode, "0: Legacy mode; 1: MSI mode; 2: MSI-X mode");
#endif /* PCIE */
module_param(low_power_mode_enable, int, 0);
MODULE_PARM_DESC(low_power_mode_enable, "0/1: Disable/Enable Low Power Mode");
module_param(wakelock_timeout, int, 0);
MODULE_PARM_DESC(wakelock_timeout, "set wakelock_timeout value (ms)");
module_param(dev_cap_mask, uint, 0);
MODULE_PARM_DESC(dev_cap_mask, "Device capability mask");
module_param(net_rx, int, 0);
MODULE_PARM_DESC(net_rx,
"0: use netif_rx_ni in rx; 1: use netif_receive_skb in rx");
#ifdef SDIO
module_param(sdio_rx_aggr, int, 0);
MODULE_PARM_DESC(sdio_rx_aggr,
"1: Enable SDIO rx aggr; 0: Disable SDIO rx aggr");
#endif
module_param(pmic, int, 0);
MODULE_PARM_DESC(
pmic,
"1: Send pmic configure cmd to firmware; 0: No pmic configure cmd sent to firmware");
module_param(antcfg, int, 0660);
MODULE_PARM_DESC(
antcfg,
"0:default; SD8887/SD8987-[1:Tx/Rx antenna 1, 2:Tx/Rx antenna 2, 0xffff:enable antenna diversity];SD8897/SD8997-[Bit0:Rx Path A, Bit1:Rx Path B, Bit 4:Tx Path A, Bit 5:Tx Path B];9098/9097-[Bit 0: 2G Tx/Rx path A, Bit 1: 2G Tx/Rx path B,Bit 8: 5G Tx/Rx path A, Bit 9: 5G Tx/Rx path B]");
module_param(uap_oper_ctrl, uint, 0);
MODULE_PARM_DESC(uap_oper_ctrl, "0:default; 0x20001:uap restarts on channel 6");
module_param(hs_wake_interval, int, 0660);
MODULE_PARM_DESC(
hs_wake_interval,
"Host sleep wakeup interval,it will round to nearest multiple dtim*beacon_period in fw");
module_param(indication_gpio, int, 0);
MODULE_PARM_DESC(
indication_gpio,
"GPIO to indicate wakeup source; high four bits: level for normal wakeup; low four bits: GPIO pin number.");
module_param(disconnect_on_suspend, int, 0);
MODULE_PARM_DESC(
disconnect_on_suspend,
"1: Enable disconnect wifi on suspend; 0: Disable disconnect wifi on suspend");
module_param(hs_mimo_switch, int, 0660);
MODULE_PARM_DESC(
hs_mimo_switch,
"Dynamic MIMO-SISO switch during host sleep; 0: disable (default), 1: enable");
module_param(indrstcfg, int, 0);
MODULE_PARM_DESC(
indrstcfg,
"Independent reset configuration; high byte: GPIO pin number; low byte: IR mode");
module_param(fixed_beacon_buffer, int, 0);
MODULE_PARM_DESC(
fixed_beacon_buffer,
"0: allocate default buffer size; 1: allocate max buffer size.");
#ifdef WIFI_DIRECT_SUPPORT
module_param(GoAgeoutTime, int, 0);
MODULE_PARM_DESC(GoAgeoutTime,
"0: use default ageout time; set Go age out time (TU 100ms)");
#endif
module_param(gtk_rekey_offload, int, 0);
MODULE_PARM_DESC(
gtk_rekey_offload,
"0: disable gtk_rekey_offload; 1: enable gtk_rekey_offload (default); 2: enable gtk_rekey_offload in suspend mode only;");
module_param(multi_dtim, ushort, 0);
MODULE_PARM_DESC(multi_dtim, "DTIM interval");
module_param(inact_tmo, ushort, 0);
MODULE_PARM_DESC(inact_tmo, "IEEE ps inactivity timout value");
module_param(napi, int, 0);
MODULE_PARM_DESC(napi, "1: enable napi api; 0: disable napi");
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
module_param(dfs_offload, int, 0);
MODULE_PARM_DESC(dfs_offload, "1: enable dfs offload; 0: disable dfs offload.");
#endif
#ifdef UAP_SUPPORT
module_param(uap_max_sta, int, 0);
MODULE_PARM_DESC(uap_max_sta, "Maximum station number for UAP/GO.");
module_param(wacp_mode, int, 0);
MODULE_PARM_DESC(
wacp_mode,
"WACP mode for UAP/GO 0: WACP_MODE_DEFAULT; 1: WACP_MODE_1; 2: WACP_MODE_2");
#endif
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)
module_param(host_mlme, int, 0);
MODULE_PARM_DESC(host_mlme,
"1: Enable Host MLME Support; 0: Disable Host MLME support");
#endif
#endif
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
module_param(disable_regd_by_driver, int, 0);
MODULE_PARM_DESC(
disable_regd_by_driver,
"0: reg domain set by driver enable(default); 1: reg domain set by driver disable");
module_param(reg_alpha2, charp, 0660);
MODULE_PARM_DESC(reg_alpha2, "Regulatory alpha2");
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
module_param(country_ie_ignore, int, 0);
MODULE_PARM_DESC(
country_ie_ignore,
"0: Follow countryIE from AP and beacon hint enable; 1: Ignore countryIE from AP and beacon hint disable");
module_param(beacon_hints, int, 0);
MODULE_PARM_DESC(beacon_hints,
"0: enable beacon hints(default); 1: disable beacon hints");
#endif
#endif
module_param(dfs53cfg, int, 0);
MODULE_PARM_DESC(dfs53cfg, "0: fw default; 1: new w53 dfs; 2: old w53 dfs");
Reference in a new issue View git blame Copy permalink