mirror of
https://github.com/nxp-imx/mwifiex.git
synced 2024-11-15 03:25:35 +00:00
13b6fdb0b4
changes: 1. WCSWREL-191: Fixed the error when loading module param from user config for SD8801 2. WCSWREL-186: Fixed the issue of mlanutl failing on kernel higher than L5.15 3. Fixed low throughput issue for WPA3 SAE 4. Added driver change for WLAN throughput improvement on 8997 SoC 5. Updated README to recommend not to use WEP/TKIP for all chipsets 6. WCSWREL-180: Fix P2P test fail on kernel higher than L5.12 7. WCSWREL-156: kernel_write/kernel_read not allowed by drivers for L5.10 kernel GKI buildou 8. Alternative for pm_qos_add_request/pm_qos_remove_request Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Approved-by: Tian Yang <yang.tian@nxp.com>
831 lines
26 KiB
C
831 lines
26 KiB
C
/** @file mlan_uap_txrx.c
|
|
*
|
|
* @brief This file contains AP mode transmit and receive functions
|
|
*
|
|
*
|
|
* Copyright 2009-2021 NXP
|
|
*
|
|
* This software file (the File) is distributed by NXP
|
|
* under the terms of the GNU General Public License Version 2, June 1991
|
|
* (the License). You may use, redistribute and/or modify the File in
|
|
* accordance with the terms and conditions of the License, a copy of which
|
|
* is available by writing to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
|
|
* worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
|
|
*
|
|
* THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
|
|
* this warranty disclaimer.
|
|
*
|
|
*/
|
|
|
|
/********************************************************
|
|
Change log:
|
|
02/05/2009: initial version
|
|
********************************************************/
|
|
|
|
#include "mlan.h"
|
|
#include "mlan_util.h"
|
|
#include "mlan_fw.h"
|
|
#ifdef STA_SUPPORT
|
|
#include "mlan_join.h"
|
|
#endif
|
|
#include "mlan_main.h"
|
|
#include "mlan_uap.h"
|
|
#include "mlan_wmm.h"
|
|
#include "mlan_11n_aggr.h"
|
|
#include "mlan_11n_rxreorder.h"
|
|
#ifdef DRV_EMBEDDED_AUTHENTICATOR
|
|
#include "authenticator_api.h"
|
|
#endif
|
|
|
|
/********************************************************
|
|
Local Functions
|
|
********************************************************/
|
|
|
|
/**
|
|
* @brief This function processes received packet and forwards it
|
|
* to kernel/upper layer
|
|
*
|
|
* @param pmadapter A pointer to mlan_adapter
|
|
* @param pmbuf A pointer to mlan_buffer which includes the received packet
|
|
*
|
|
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
|
|
*/
|
|
static mlan_status wlan_upload_uap_rx_packet(pmlan_adapter pmadapter,
|
|
pmlan_buffer pmbuf)
|
|
{
|
|
mlan_status ret = MLAN_STATUS_SUCCESS;
|
|
#ifdef DEBUG_LEVEL1
|
|
pmlan_private priv = pmadapter->priv[pmbuf->bss_index];
|
|
#endif
|
|
PRxPD prx_pd;
|
|
ENTER();
|
|
prx_pd = (RxPD *)(pmbuf->pbuf + pmbuf->data_offset);
|
|
|
|
/* Chop off RxPD */
|
|
pmbuf->data_len -= prx_pd->rx_pkt_offset;
|
|
pmbuf->data_offset += prx_pd->rx_pkt_offset;
|
|
pmbuf->pparent = MNULL;
|
|
|
|
DBG_HEXDUMP(MDAT_D, "uAP RxPD", (t_u8 *)prx_pd,
|
|
MIN(sizeof(RxPD), MAX_DATA_DUMP_LEN));
|
|
DBG_HEXDUMP(MDAT_D, "uAP Rx Payload",
|
|
((t_u8 *)prx_pd + prx_pd->rx_pkt_offset),
|
|
MIN(prx_pd->rx_pkt_length, MAX_DATA_DUMP_LEN));
|
|
|
|
pmadapter->callbacks.moal_get_system_time(pmadapter->pmoal_handle,
|
|
&pmbuf->out_ts_sec,
|
|
&pmbuf->out_ts_usec);
|
|
PRINTM_NETINTF(MDATA, priv);
|
|
PRINTM(MDATA, "%lu.%06lu : Data => kernel seq_num=%d tid=%d\n",
|
|
pmbuf->out_ts_sec, pmbuf->out_ts_usec, prx_pd->seq_num,
|
|
prx_pd->priority);
|
|
ret = pmadapter->callbacks.moal_recv_packet(pmadapter->pmoal_handle,
|
|
pmbuf);
|
|
if (ret == MLAN_STATUS_FAILURE) {
|
|
PRINTM(MERROR,
|
|
"uAP Rx Error: moal_recv_packet returned error\n");
|
|
pmbuf->status_code = MLAN_ERROR_PKT_INVALID;
|
|
}
|
|
|
|
if (ret != MLAN_STATUS_PENDING)
|
|
pmadapter->ops.data_complete(pmadapter, pmbuf, ret);
|
|
#ifdef USB
|
|
else if (IS_USB(pmadapter->card_type))
|
|
pmadapter->callbacks.moal_recv_complete(pmadapter->pmoal_handle,
|
|
MNULL,
|
|
pmadapter->rx_data_ep,
|
|
ret);
|
|
#endif
|
|
LEAVE();
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @brief This function will check if unicast packet need be dropped
|
|
*
|
|
* @param priv A pointer to mlan_private
|
|
* @param mac mac address to find in station list table
|
|
*
|
|
* @return MLAN_STATUS_FAILURE -- drop packet, otherwise forward to
|
|
* network stack
|
|
*/
|
|
static mlan_status wlan_check_unicast_packet(mlan_private *priv, t_u8 *mac)
|
|
{
|
|
int j;
|
|
sta_node *sta_ptr = MNULL;
|
|
pmlan_adapter pmadapter = priv->adapter;
|
|
pmlan_private pmpriv = MNULL;
|
|
t_u8 pkt_type = 0;
|
|
mlan_status ret = MLAN_STATUS_SUCCESS;
|
|
ENTER();
|
|
for (j = 0; j < MLAN_MAX_BSS_NUM; ++j) {
|
|
pmpriv = pmadapter->priv[j];
|
|
if (pmpriv) {
|
|
if (GET_BSS_ROLE(pmpriv) == MLAN_BSS_ROLE_STA)
|
|
continue;
|
|
sta_ptr = wlan_get_station_entry(pmpriv, mac);
|
|
if (sta_ptr) {
|
|
if (pmpriv == priv)
|
|
pkt_type = PKT_INTRA_UCAST;
|
|
else
|
|
pkt_type = PKT_INTER_UCAST;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
if ((pkt_type == PKT_INTRA_UCAST) &&
|
|
(priv->pkt_fwd & PKT_FWD_INTRA_UCAST)) {
|
|
PRINTM(MDATA, "Drop INTRA_UCAST packet\n");
|
|
ret = MLAN_STATUS_FAILURE;
|
|
} else if ((pkt_type == PKT_INTER_UCAST) &&
|
|
(priv->pkt_fwd & PKT_FWD_INTER_UCAST)) {
|
|
PRINTM(MDATA, "Drop INTER_UCAST packet\n");
|
|
ret = MLAN_STATUS_FAILURE;
|
|
}
|
|
LEAVE();
|
|
return ret;
|
|
}
|
|
/********************************************************
|
|
Global Functions
|
|
********************************************************/
|
|
/**
|
|
* @brief This function fill the txpd for tx packet
|
|
*
|
|
* @param priv A pointer to mlan_private structure
|
|
* @param pmbuf A pointer to the mlan_buffer for process
|
|
*
|
|
* @return headptr or MNULL
|
|
*/
|
|
t_void *wlan_ops_uap_process_txpd(t_void *priv, pmlan_buffer pmbuf)
|
|
{
|
|
pmlan_private pmpriv = (pmlan_private)priv;
|
|
TxPD *plocal_tx_pd;
|
|
t_u8 *head_ptr = MNULL;
|
|
t_u32 pkt_type;
|
|
t_u32 tx_control;
|
|
t_u8 dst_mac[MLAN_MAC_ADDR_LENGTH];
|
|
|
|
ENTER();
|
|
|
|
if (!pmbuf->data_len) {
|
|
PRINTM(MERROR, "uAP Tx Error: Invalid packet length: %d\n",
|
|
pmbuf->data_len);
|
|
pmbuf->status_code = MLAN_ERROR_PKT_SIZE_INVALID;
|
|
goto done;
|
|
}
|
|
if (pmbuf->buf_type == MLAN_BUF_TYPE_RAW_DATA) {
|
|
memcpy_ext(pmpriv->adapter, &pkt_type,
|
|
pmbuf->pbuf + pmbuf->data_offset, sizeof(pkt_type),
|
|
sizeof(pkt_type));
|
|
memcpy_ext(pmpriv->adapter, &tx_control,
|
|
pmbuf->pbuf + pmbuf->data_offset + sizeof(pkt_type),
|
|
sizeof(tx_control), sizeof(tx_control));
|
|
pmbuf->data_offset += sizeof(pkt_type) + sizeof(tx_control);
|
|
pmbuf->data_len -= sizeof(pkt_type) + sizeof(tx_control);
|
|
}
|
|
if (pmbuf->data_offset <
|
|
(sizeof(TxPD) + pmpriv->intf_hr_len + DMA_ALIGNMENT)) {
|
|
PRINTM(MERROR,
|
|
"not enough space for TxPD: headroom=%d pkt_len=%d, required=%d\n",
|
|
pmbuf->data_offset, pmbuf->data_len,
|
|
sizeof(TxPD) + pmpriv->intf_hr_len + DMA_ALIGNMENT);
|
|
DBG_HEXDUMP(MDAT_D, "drop pkt",
|
|
pmbuf->pbuf + pmbuf->data_offset, pmbuf->data_len);
|
|
pmbuf->status_code = MLAN_ERROR_PKT_SIZE_INVALID;
|
|
goto done;
|
|
}
|
|
|
|
/* head_ptr should be aligned */
|
|
head_ptr = pmbuf->pbuf + pmbuf->data_offset - sizeof(TxPD) -
|
|
pmpriv->intf_hr_len;
|
|
head_ptr = (t_u8 *)((t_ptr)head_ptr & ~((t_ptr)(DMA_ALIGNMENT - 1)));
|
|
|
|
plocal_tx_pd = (TxPD *)(head_ptr + pmpriv->intf_hr_len);
|
|
memset(pmpriv->adapter, plocal_tx_pd, 0, sizeof(TxPD));
|
|
|
|
/* Set the BSS number to TxPD */
|
|
plocal_tx_pd->bss_num = GET_BSS_NUM(pmpriv);
|
|
plocal_tx_pd->bss_type = pmpriv->bss_type;
|
|
|
|
plocal_tx_pd->tx_pkt_length = (t_u16)pmbuf->data_len;
|
|
|
|
plocal_tx_pd->priority = (t_u8)pmbuf->priority;
|
|
plocal_tx_pd->pkt_delay_2ms =
|
|
wlan_wmm_compute_driver_packet_delay(pmpriv, pmbuf);
|
|
|
|
if (plocal_tx_pd->priority <
|
|
NELEMENTS(pmpriv->wmm.user_pri_pkt_tx_ctrl))
|
|
/*
|
|
* Set the priority specific tx_control field, setting of 0 will
|
|
* cause the default value to be used later in this function
|
|
*/
|
|
plocal_tx_pd->tx_control =
|
|
pmpriv->wmm.user_pri_pkt_tx_ctrl[plocal_tx_pd->priority];
|
|
|
|
if (pmbuf->flags & MLAN_BUF_FLAG_TX_STATUS) {
|
|
plocal_tx_pd->tx_control_1 |= pmbuf->tx_seq_num << 8;
|
|
plocal_tx_pd->flags |= MRVDRV_TxPD_FLAGS_TX_PACKET_STATUS;
|
|
}
|
|
|
|
/* Offset of actual data */
|
|
plocal_tx_pd->tx_pkt_offset = (t_u16)(
|
|
(t_ptr)pmbuf->pbuf + pmbuf->data_offset - (t_ptr)plocal_tx_pd);
|
|
|
|
if (!plocal_tx_pd->tx_control) {
|
|
/* TxCtrl set by user or default */
|
|
plocal_tx_pd->tx_control = pmpriv->pkt_tx_ctrl;
|
|
}
|
|
|
|
if (pmbuf->buf_type == MLAN_BUF_TYPE_RAW_DATA) {
|
|
plocal_tx_pd->tx_pkt_type = (t_u16)pkt_type;
|
|
plocal_tx_pd->tx_control = tx_control;
|
|
}
|
|
|
|
if (pmbuf->flags & MLAN_BUF_FLAG_TX_CTRL) {
|
|
if (pmbuf->u.tx_info.data_rate) {
|
|
memcpy_ext(pmpriv->adapter, dst_mac,
|
|
pmbuf->pbuf + pmbuf->data_offset,
|
|
sizeof(dst_mac), sizeof(dst_mac));
|
|
plocal_tx_pd->tx_control |=
|
|
(wlan_ieee_rateid_to_mrvl_rateid(
|
|
pmpriv, pmbuf->u.tx_info.data_rate,
|
|
dst_mac)
|
|
<< 16);
|
|
plocal_tx_pd->tx_control |= TXPD_TXRATE_ENABLE;
|
|
}
|
|
plocal_tx_pd->tx_control_1 |= pmbuf->u.tx_info.channel << 21;
|
|
if (pmbuf->u.tx_info.bw) {
|
|
plocal_tx_pd->tx_control_1 |= pmbuf->u.tx_info.bw << 16;
|
|
plocal_tx_pd->tx_control_1 |= TXPD_BW_ENABLE;
|
|
}
|
|
if (pmbuf->u.tx_info.tx_power.tp.hostctl)
|
|
plocal_tx_pd->tx_control |=
|
|
(t_u32)pmbuf->u.tx_info.tx_power.val;
|
|
if (pmbuf->u.tx_info.retry_limit) {
|
|
plocal_tx_pd->tx_control |= pmbuf->u.tx_info.retry_limit
|
|
<< 8;
|
|
plocal_tx_pd->tx_control |= TXPD_RETRY_ENABLE;
|
|
}
|
|
}
|
|
|
|
endian_convert_TxPD(plocal_tx_pd);
|
|
|
|
/* Adjust the data offset and length to include TxPD in pmbuf */
|
|
pmbuf->data_len += pmbuf->data_offset;
|
|
pmbuf->data_offset = (t_u32)((t_ptr)head_ptr - (t_ptr)pmbuf->pbuf);
|
|
pmbuf->data_len -= pmbuf->data_offset;
|
|
|
|
done:
|
|
LEAVE();
|
|
return head_ptr;
|
|
}
|
|
|
|
/**
|
|
* @brief This function processes received packet and forwards it
|
|
* to kernel/upper layer
|
|
*
|
|
* @param adapter A pointer to mlan_adapter
|
|
* @param pmbuf A pointer to mlan_buffer which includes the received packet
|
|
*
|
|
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
|
|
*/
|
|
mlan_status wlan_ops_uap_process_rx_packet(t_void *adapter, pmlan_buffer pmbuf)
|
|
{
|
|
pmlan_adapter pmadapter = (pmlan_adapter)adapter;
|
|
mlan_status ret = MLAN_STATUS_SUCCESS;
|
|
RxPD *prx_pd;
|
|
wlan_mgmt_pkt *puap_pkt_hdr = MNULL;
|
|
|
|
RxPacketHdr_t *prx_pkt;
|
|
pmlan_private priv = pmadapter->priv[pmbuf->bss_index];
|
|
t_u8 ta[MLAN_MAC_ADDR_LENGTH];
|
|
t_u16 rx_pkt_type = 0;
|
|
sta_node *sta_ptr = MNULL;
|
|
#ifdef DRV_EMBEDDED_AUTHENTICATOR
|
|
t_u8 eapol_type[2] = {0x88, 0x8e};
|
|
#endif
|
|
t_u16 adj_rx_rate = 0;
|
|
t_u8 antenna = 0;
|
|
|
|
t_u32 last_rx_sec = 0;
|
|
t_u32 last_rx_usec = 0;
|
|
t_u8 ext_rate_info = 0;
|
|
|
|
ENTER();
|
|
|
|
prx_pd = (RxPD *)(pmbuf->pbuf + pmbuf->data_offset);
|
|
/* Endian conversion */
|
|
endian_convert_RxPD(prx_pd);
|
|
|
|
if (priv->adapter->pcard_info->v14_fw_api) {
|
|
t_u8 rxpd_rate_info_orig = prx_pd->rate_info;
|
|
prx_pd->rate_info = wlan_convert_v14_rx_rate_info(
|
|
priv, rxpd_rate_info_orig);
|
|
PRINTM(MINFO,
|
|
"UAP RX: v14_fw_api=%d rx_rate =%d rxpd_rate_info=0x%x->0x%x\n",
|
|
priv->adapter->pcard_info->v14_fw_api, prx_pd->rx_rate,
|
|
rxpd_rate_info_orig, prx_pd->rate_info);
|
|
}
|
|
|
|
if (priv->rx_pkt_info) {
|
|
ext_rate_info = (t_u8)(prx_pd->rx_info >> 16);
|
|
pmbuf->u.rx_info.data_rate =
|
|
wlan_index_to_data_rate(priv->adapter, prx_pd->rx_rate,
|
|
prx_pd->rate_info,
|
|
ext_rate_info);
|
|
pmbuf->u.rx_info.channel =
|
|
(prx_pd->rx_info & RXPD_CHAN_MASK) >> 5;
|
|
pmbuf->u.rx_info.antenna = prx_pd->antenna;
|
|
pmbuf->u.rx_info.rssi = prx_pd->snr - prx_pd->nf;
|
|
}
|
|
|
|
rx_pkt_type = prx_pd->rx_pkt_type;
|
|
prx_pkt = (RxPacketHdr_t *)((t_u8 *)prx_pd + prx_pd->rx_pkt_offset);
|
|
|
|
PRINTM(MINFO,
|
|
"RX Data: data_len - prx_pd->rx_pkt_offset = %d - %d = %d\n",
|
|
pmbuf->data_len, prx_pd->rx_pkt_offset,
|
|
pmbuf->data_len - prx_pd->rx_pkt_offset);
|
|
|
|
if ((prx_pd->rx_pkt_offset + prx_pd->rx_pkt_length) !=
|
|
(t_u16)pmbuf->data_len) {
|
|
PRINTM(MERROR,
|
|
"Wrong rx packet: len=%d,rx_pkt_offset=%d,"
|
|
" rx_pkt_length=%d\n",
|
|
pmbuf->data_len, prx_pd->rx_pkt_offset,
|
|
prx_pd->rx_pkt_length);
|
|
pmbuf->status_code = MLAN_ERROR_PKT_SIZE_INVALID;
|
|
ret = MLAN_STATUS_FAILURE;
|
|
pmadapter->ops.data_complete(pmadapter, pmbuf, ret);
|
|
goto done;
|
|
}
|
|
pmbuf->data_len = prx_pd->rx_pkt_offset + prx_pd->rx_pkt_length;
|
|
|
|
if (pmadapter->priv[pmbuf->bss_index]->mgmt_frame_passthru_mask &&
|
|
prx_pd->rx_pkt_type == PKT_TYPE_MGMT_FRAME) {
|
|
/* Check if this is mgmt packet and needs to
|
|
* forwarded to app as an event
|
|
*/
|
|
puap_pkt_hdr = (wlan_mgmt_pkt *)((t_u8 *)prx_pd +
|
|
prx_pd->rx_pkt_offset);
|
|
puap_pkt_hdr->frm_len = wlan_le16_to_cpu(puap_pkt_hdr->frm_len);
|
|
if ((puap_pkt_hdr->wlan_header.frm_ctl &
|
|
IEEE80211_FC_MGMT_FRAME_TYPE_MASK) == 0)
|
|
wlan_process_802dot11_mgmt_pkt(
|
|
pmadapter->priv[pmbuf->bss_index],
|
|
(t_u8 *)&puap_pkt_hdr->wlan_header,
|
|
puap_pkt_hdr->frm_len + sizeof(wlan_mgmt_pkt) -
|
|
sizeof(puap_pkt_hdr->frm_len),
|
|
(RxPD *)prx_pd);
|
|
pmadapter->ops.data_complete(pmadapter, pmbuf, ret);
|
|
goto done;
|
|
}
|
|
if (rx_pkt_type != PKT_TYPE_BAR) {
|
|
priv->rxpd_rate = prx_pd->rx_rate;
|
|
priv->rxpd_rate_info = prx_pd->rate_info;
|
|
priv->rxpd_rx_info = (t_u8)(prx_pd->rx_info >> 16);
|
|
|
|
if (priv->bss_type == MLAN_BSS_TYPE_UAP) {
|
|
antenna = wlan_adjust_antenna(priv, (RxPD *)prx_pd);
|
|
adj_rx_rate = wlan_adjust_data_rate(
|
|
priv, priv->rxpd_rate, priv->rxpd_rate_info);
|
|
pmadapter->callbacks.moal_hist_data_add(
|
|
pmadapter->pmoal_handle, pmbuf->bss_index,
|
|
adj_rx_rate, prx_pd->snr, prx_pd->nf, antenna);
|
|
}
|
|
}
|
|
|
|
sta_ptr = wlan_get_station_entry(priv, prx_pkt->eth803_hdr.src_addr);
|
|
if (sta_ptr) {
|
|
sta_ptr->snr = prx_pd->snr;
|
|
sta_ptr->nf = prx_pd->nf;
|
|
pmadapter->callbacks.moal_get_system_time(
|
|
pmadapter->pmoal_handle, &last_rx_sec, &last_rx_usec);
|
|
sta_ptr->stats.last_rx_in_msec =
|
|
(t_u64)last_rx_sec * 1000 + (t_u64)last_rx_usec / 1000;
|
|
}
|
|
|
|
#ifdef DRV_EMBEDDED_AUTHENTICATOR
|
|
/**process eapol packet for uap*/
|
|
if (IsAuthenticatorEnabled(priv->psapriv) &&
|
|
(!memcmp(pmadapter, &prx_pkt->eth803_hdr.h803_len, eapol_type,
|
|
sizeof(eapol_type)))) {
|
|
ret = AuthenticatorProcessEapolPacket(
|
|
priv->psapriv, ((t_u8 *)prx_pd + prx_pd->rx_pkt_offset),
|
|
prx_pd->rx_pkt_length);
|
|
if (ret == MLAN_STATUS_SUCCESS) {
|
|
pmadapter->ops.data_complete(pmadapter, pmbuf, ret);
|
|
goto done;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
pmbuf->priority |= prx_pd->priority;
|
|
memcpy_ext(pmadapter, ta, prx_pkt->eth803_hdr.src_addr,
|
|
MLAN_MAC_ADDR_LENGTH, MLAN_MAC_ADDR_LENGTH);
|
|
if ((rx_pkt_type != PKT_TYPE_BAR) && (prx_pd->priority < MAX_NUM_TID)) {
|
|
sta_ptr = wlan_get_station_entry(priv, ta);
|
|
if (sta_ptr) {
|
|
sta_ptr->rx_seq[prx_pd->priority] = prx_pd->seq_num;
|
|
sta_ptr->snr = prx_pd->snr;
|
|
sta_ptr->nf = prx_pd->nf;
|
|
}
|
|
}
|
|
/* check if UAP enable 11n */
|
|
if (!priv->is_11n_enabled ||
|
|
(!wlan_11n_get_rxreorder_tbl((mlan_private *)priv, prx_pd->priority,
|
|
ta) &&
|
|
(prx_pd->rx_pkt_type != PKT_TYPE_AMSDU))) {
|
|
if (priv->pkt_fwd)
|
|
wlan_process_uap_rx_packet(priv, pmbuf);
|
|
else
|
|
wlan_upload_uap_rx_packet(pmadapter, pmbuf);
|
|
goto done;
|
|
}
|
|
/* Reorder and send to OS */
|
|
ret = mlan_11n_rxreorder_pkt(priv, prx_pd->seq_num, prx_pd->priority,
|
|
ta, (t_u8)prx_pd->rx_pkt_type,
|
|
(void *)pmbuf);
|
|
if (ret || (rx_pkt_type == PKT_TYPE_BAR)) {
|
|
pmadapter->ops.data_complete(pmadapter, pmbuf, ret);
|
|
}
|
|
done:
|
|
LEAVE();
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @brief This function processes received packet and forwards it
|
|
* to kernel/upper layer or send back to firmware
|
|
*
|
|
* @param priv A pointer to mlan_private
|
|
* @param pmbuf A pointer to mlan_buffer which includes the received packet
|
|
*
|
|
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
|
|
*/
|
|
mlan_status wlan_uap_recv_packet(mlan_private *priv, pmlan_buffer pmbuf)
|
|
{
|
|
pmlan_adapter pmadapter = priv->adapter;
|
|
mlan_status ret = MLAN_STATUS_SUCCESS;
|
|
RxPacketHdr_t *prx_pkt;
|
|
pmlan_buffer newbuf = MNULL;
|
|
|
|
ENTER();
|
|
|
|
prx_pkt = (RxPacketHdr_t *)((t_u8 *)pmbuf->pbuf + pmbuf->data_offset);
|
|
|
|
DBG_HEXDUMP(MDAT_D, "uap_recv_packet", pmbuf->pbuf + pmbuf->data_offset,
|
|
MIN(pmbuf->data_len, MAX_DATA_DUMP_LEN));
|
|
|
|
PRINTM(MDATA, "AMSDU dest " MACSTR "\n",
|
|
MAC2STR(prx_pkt->eth803_hdr.dest_addr));
|
|
|
|
/* don't do packet forwarding in disconnected state */
|
|
if ((priv->media_connected == MFALSE) ||
|
|
(pmbuf->data_len > MV_ETH_FRAME_LEN))
|
|
goto upload;
|
|
|
|
if (prx_pkt->eth803_hdr.dest_addr[0] & 0x01) {
|
|
if (!(priv->pkt_fwd & PKT_FWD_INTRA_BCAST)) {
|
|
/* Multicast pkt */
|
|
newbuf =
|
|
wlan_alloc_mlan_buffer(pmadapter,
|
|
MLAN_TX_DATA_BUF_SIZE_2K,
|
|
0, MOAL_MALLOC_BUFFER);
|
|
if (newbuf) {
|
|
newbuf->bss_index = pmbuf->bss_index;
|
|
newbuf->buf_type = pmbuf->buf_type;
|
|
newbuf->priority = pmbuf->priority;
|
|
newbuf->in_ts_sec = pmbuf->in_ts_sec;
|
|
newbuf->in_ts_usec = pmbuf->in_ts_usec;
|
|
newbuf->data_offset =
|
|
(sizeof(TxPD) + priv->intf_hr_len +
|
|
DMA_ALIGNMENT);
|
|
util_scalar_increment(
|
|
pmadapter->pmoal_handle,
|
|
&pmadapter->pending_bridge_pkts,
|
|
pmadapter->callbacks.moal_spin_lock,
|
|
pmadapter->callbacks.moal_spin_unlock);
|
|
|
|
newbuf->flags |= MLAN_BUF_FLAG_BRIDGE_BUF;
|
|
|
|
/* copy the data */
|
|
memcpy_ext(pmadapter,
|
|
(t_u8 *)newbuf->pbuf +
|
|
newbuf->data_offset,
|
|
pmbuf->pbuf + pmbuf->data_offset,
|
|
pmbuf->data_len,
|
|
MLAN_TX_DATA_BUF_SIZE_2K);
|
|
newbuf->data_len = pmbuf->data_len;
|
|
wlan_wmm_add_buf_txqueue(pmadapter, newbuf);
|
|
if (util_scalar_read(
|
|
pmadapter->pmoal_handle,
|
|
&pmadapter->pending_bridge_pkts,
|
|
pmadapter->callbacks.moal_spin_lock,
|
|
pmadapter->callbacks
|
|
.moal_spin_unlock) >
|
|
RX_HIGH_THRESHOLD)
|
|
wlan_drop_tx_pkts(priv);
|
|
wlan_recv_event(
|
|
priv, MLAN_EVENT_ID_DRV_DEFER_HANDLING,
|
|
MNULL);
|
|
}
|
|
}
|
|
} else {
|
|
if ((!(priv->pkt_fwd & PKT_FWD_INTRA_UCAST)) &&
|
|
(wlan_get_station_entry(priv,
|
|
prx_pkt->eth803_hdr.dest_addr))) {
|
|
/* Intra BSS packet */
|
|
newbuf =
|
|
wlan_alloc_mlan_buffer(pmadapter,
|
|
MLAN_TX_DATA_BUF_SIZE_2K,
|
|
0, MOAL_MALLOC_BUFFER);
|
|
if (newbuf) {
|
|
newbuf->bss_index = pmbuf->bss_index;
|
|
newbuf->buf_type = pmbuf->buf_type;
|
|
newbuf->priority = pmbuf->priority;
|
|
newbuf->in_ts_sec = pmbuf->in_ts_sec;
|
|
newbuf->in_ts_usec = pmbuf->in_ts_usec;
|
|
newbuf->data_offset =
|
|
(sizeof(TxPD) + priv->intf_hr_len +
|
|
DMA_ALIGNMENT);
|
|
util_scalar_increment(
|
|
pmadapter->pmoal_handle,
|
|
&pmadapter->pending_bridge_pkts,
|
|
pmadapter->callbacks.moal_spin_lock,
|
|
pmadapter->callbacks.moal_spin_unlock);
|
|
newbuf->flags |= MLAN_BUF_FLAG_BRIDGE_BUF;
|
|
|
|
/* copy the data */
|
|
memcpy_ext(pmadapter,
|
|
(t_u8 *)newbuf->pbuf +
|
|
newbuf->data_offset,
|
|
pmbuf->pbuf + pmbuf->data_offset,
|
|
pmbuf->data_len,
|
|
MLAN_TX_DATA_BUF_SIZE_2K);
|
|
newbuf->data_len = pmbuf->data_len;
|
|
wlan_wmm_add_buf_txqueue(pmadapter, newbuf);
|
|
if (util_scalar_read(
|
|
pmadapter->pmoal_handle,
|
|
&pmadapter->pending_bridge_pkts,
|
|
pmadapter->callbacks.moal_spin_lock,
|
|
pmadapter->callbacks
|
|
.moal_spin_unlock) >
|
|
RX_HIGH_THRESHOLD)
|
|
wlan_drop_tx_pkts(priv);
|
|
wlan_recv_event(
|
|
priv, MLAN_EVENT_ID_DRV_DEFER_HANDLING,
|
|
MNULL);
|
|
}
|
|
goto done;
|
|
} else if (MLAN_STATUS_FAILURE ==
|
|
wlan_check_unicast_packet(
|
|
priv, prx_pkt->eth803_hdr.dest_addr)) {
|
|
/* drop packet */
|
|
PRINTM(MDATA, "Drop AMSDU dest " MACSTR "\n",
|
|
MAC2STR(prx_pkt->eth803_hdr.dest_addr));
|
|
goto done;
|
|
}
|
|
}
|
|
upload:
|
|
/** send packet to moal */
|
|
ret = pmadapter->callbacks.moal_recv_packet(pmadapter->pmoal_handle,
|
|
pmbuf);
|
|
done:
|
|
LEAVE();
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @brief This function processes received packet and forwards it
|
|
* to kernel/upper layer or send back to firmware
|
|
*
|
|
* @param priv A pointer to mlan_private
|
|
* @param pmbuf A pointer to mlan_buffer which includes the received packet
|
|
*
|
|
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
|
|
*/
|
|
mlan_status wlan_process_uap_rx_packet(mlan_private *priv, pmlan_buffer pmbuf)
|
|
{
|
|
pmlan_adapter pmadapter = priv->adapter;
|
|
mlan_status ret = MLAN_STATUS_SUCCESS;
|
|
RxPD *prx_pd;
|
|
RxPacketHdr_t *prx_pkt;
|
|
pmlan_buffer newbuf = MNULL;
|
|
|
|
ENTER();
|
|
|
|
prx_pd = (RxPD *)(pmbuf->pbuf + pmbuf->data_offset);
|
|
prx_pkt = (RxPacketHdr_t *)((t_u8 *)prx_pd + prx_pd->rx_pkt_offset);
|
|
|
|
DBG_HEXDUMP(MDAT_D, "uAP RxPD", prx_pd,
|
|
MIN(sizeof(RxPD), MAX_DATA_DUMP_LEN));
|
|
DBG_HEXDUMP(MDAT_D, "uAP Rx Payload",
|
|
((t_u8 *)prx_pd + prx_pd->rx_pkt_offset),
|
|
MIN(prx_pd->rx_pkt_length, MAX_DATA_DUMP_LEN));
|
|
|
|
PRINTM(MINFO,
|
|
"RX Data: data_len - prx_pd->rx_pkt_offset = %d - %d = %d\n",
|
|
pmbuf->data_len, prx_pd->rx_pkt_offset,
|
|
pmbuf->data_len - prx_pd->rx_pkt_offset);
|
|
PRINTM(MDATA, "Rx dest " MACSTR "\n",
|
|
MAC2STR(prx_pkt->eth803_hdr.dest_addr));
|
|
|
|
/* don't do packet forwarding in disconnected state */
|
|
/* don't do packet forwarding when packet > 1514 */
|
|
if ((priv->media_connected == MFALSE) ||
|
|
((pmbuf->data_len - prx_pd->rx_pkt_offset) > MV_ETH_FRAME_LEN))
|
|
goto upload;
|
|
|
|
if (prx_pkt->eth803_hdr.dest_addr[0] & 0x01) {
|
|
if (!(priv->pkt_fwd & PKT_FWD_INTRA_BCAST)) {
|
|
/* Multicast pkt */
|
|
newbuf =
|
|
wlan_alloc_mlan_buffer(pmadapter,
|
|
MLAN_TX_DATA_BUF_SIZE_2K,
|
|
0, MOAL_MALLOC_BUFFER);
|
|
if (newbuf) {
|
|
newbuf->bss_index = pmbuf->bss_index;
|
|
newbuf->buf_type = pmbuf->buf_type;
|
|
newbuf->priority = pmbuf->priority;
|
|
newbuf->in_ts_sec = pmbuf->in_ts_sec;
|
|
newbuf->in_ts_usec = pmbuf->in_ts_usec;
|
|
newbuf->data_offset =
|
|
(sizeof(TxPD) + priv->intf_hr_len +
|
|
DMA_ALIGNMENT);
|
|
util_scalar_increment(
|
|
pmadapter->pmoal_handle,
|
|
&pmadapter->pending_bridge_pkts,
|
|
pmadapter->callbacks.moal_spin_lock,
|
|
pmadapter->callbacks.moal_spin_unlock);
|
|
newbuf->flags |= MLAN_BUF_FLAG_BRIDGE_BUF;
|
|
|
|
/* copy the data, skip rxpd */
|
|
memcpy_ext(pmadapter,
|
|
(t_u8 *)newbuf->pbuf +
|
|
newbuf->data_offset,
|
|
pmbuf->pbuf + pmbuf->data_offset +
|
|
prx_pd->rx_pkt_offset,
|
|
pmbuf->data_len -
|
|
prx_pd->rx_pkt_offset,
|
|
MLAN_TX_DATA_BUF_SIZE_2K);
|
|
newbuf->data_len =
|
|
pmbuf->data_len - prx_pd->rx_pkt_offset;
|
|
wlan_wmm_add_buf_txqueue(pmadapter, newbuf);
|
|
if (util_scalar_read(
|
|
pmadapter->pmoal_handle,
|
|
&pmadapter->pending_bridge_pkts,
|
|
pmadapter->callbacks.moal_spin_lock,
|
|
pmadapter->callbacks
|
|
.moal_spin_unlock) >
|
|
RX_HIGH_THRESHOLD)
|
|
wlan_drop_tx_pkts(priv);
|
|
wlan_recv_event(
|
|
priv, MLAN_EVENT_ID_DRV_DEFER_HANDLING,
|
|
MNULL);
|
|
}
|
|
}
|
|
} else {
|
|
if ((!(priv->pkt_fwd & PKT_FWD_INTRA_UCAST)) &&
|
|
(wlan_get_station_entry(priv,
|
|
prx_pkt->eth803_hdr.dest_addr))) {
|
|
/* Forwarding Intra-BSS packet */
|
|
#ifdef USB
|
|
if (IS_USB(pmadapter->card_type)) {
|
|
if (pmbuf->flags & MLAN_BUF_FLAG_RX_DEAGGR) {
|
|
newbuf = wlan_alloc_mlan_buffer(
|
|
pmadapter,
|
|
MLAN_TX_DATA_BUF_SIZE_2K, 0,
|
|
MOAL_MALLOC_BUFFER);
|
|
if (newbuf) {
|
|
newbuf->bss_index =
|
|
pmbuf->bss_index;
|
|
newbuf->buf_type =
|
|
pmbuf->buf_type;
|
|
newbuf->priority =
|
|
pmbuf->priority;
|
|
newbuf->in_ts_sec =
|
|
pmbuf->in_ts_sec;
|
|
newbuf->in_ts_usec =
|
|
pmbuf->in_ts_usec;
|
|
newbuf->data_offset =
|
|
(sizeof(TxPD) +
|
|
priv->intf_hr_len +
|
|
DMA_ALIGNMENT);
|
|
util_scalar_increment(
|
|
pmadapter->pmoal_handle,
|
|
&pmadapter->pending_bridge_pkts,
|
|
pmadapter->callbacks
|
|
.moal_spin_lock,
|
|
pmadapter->callbacks
|
|
.moal_spin_unlock);
|
|
newbuf->flags |=
|
|
MLAN_BUF_FLAG_BRIDGE_BUF;
|
|
|
|
/* copy the data, skip rxpd */
|
|
memcpy_ext(
|
|
pmadapter,
|
|
(t_u8 *)newbuf->pbuf +
|
|
newbuf->data_offset,
|
|
pmbuf->pbuf +
|
|
pmbuf->data_offset +
|
|
prx_pd->rx_pkt_offset,
|
|
pmbuf->data_len -
|
|
prx_pd->rx_pkt_offset,
|
|
pmbuf->data_len -
|
|
prx_pd->rx_pkt_offset);
|
|
newbuf->data_len =
|
|
pmbuf->data_len -
|
|
prx_pd->rx_pkt_offset;
|
|
wlan_wmm_add_buf_txqueue(
|
|
pmadapter, newbuf);
|
|
if (util_scalar_read(
|
|
pmadapter->pmoal_handle,
|
|
&pmadapter->pending_bridge_pkts,
|
|
pmadapter->callbacks
|
|
.moal_spin_lock,
|
|
pmadapter->callbacks
|
|
.moal_spin_unlock) >
|
|
RX_HIGH_THRESHOLD)
|
|
wlan_drop_tx_pkts(priv);
|
|
wlan_recv_event(
|
|
priv,
|
|
MLAN_EVENT_ID_DRV_DEFER_HANDLING,
|
|
MNULL);
|
|
}
|
|
pmadapter->callbacks.moal_recv_complete(
|
|
pmadapter->pmoal_handle, pmbuf,
|
|
pmadapter->rx_data_ep, ret);
|
|
goto done;
|
|
}
|
|
}
|
|
#endif
|
|
pmbuf->data_len -= prx_pd->rx_pkt_offset;
|
|
pmbuf->data_offset += prx_pd->rx_pkt_offset;
|
|
pmbuf->flags |= MLAN_BUF_FLAG_BRIDGE_BUF;
|
|
util_scalar_increment(
|
|
pmadapter->pmoal_handle,
|
|
&pmadapter->pending_bridge_pkts,
|
|
pmadapter->callbacks.moal_spin_lock,
|
|
pmadapter->callbacks.moal_spin_unlock);
|
|
wlan_wmm_add_buf_txqueue(pmadapter, pmbuf);
|
|
if (util_scalar_read(
|
|
pmadapter->pmoal_handle,
|
|
&pmadapter->pending_bridge_pkts,
|
|
pmadapter->callbacks.moal_spin_lock,
|
|
pmadapter->callbacks.moal_spin_unlock) >
|
|
RX_HIGH_THRESHOLD)
|
|
wlan_drop_tx_pkts(priv);
|
|
wlan_recv_event(priv, MLAN_EVENT_ID_DRV_DEFER_HANDLING,
|
|
MNULL);
|
|
goto done;
|
|
} else if (MLAN_STATUS_FAILURE ==
|
|
wlan_check_unicast_packet(
|
|
priv, prx_pkt->eth803_hdr.dest_addr)) {
|
|
PRINTM(MDATA, "Drop Pkts: Rx dest " MACSTR "\n",
|
|
MAC2STR(prx_pkt->eth803_hdr.dest_addr));
|
|
pmbuf->status_code = MLAN_ERROR_PKT_INVALID;
|
|
pmadapter->ops.data_complete(pmadapter, pmbuf, ret);
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
upload:
|
|
/* Chop off RxPD */
|
|
pmbuf->data_len -= prx_pd->rx_pkt_offset;
|
|
pmbuf->data_offset += prx_pd->rx_pkt_offset;
|
|
pmbuf->pparent = MNULL;
|
|
|
|
pmadapter->callbacks.moal_get_system_time(pmadapter->pmoal_handle,
|
|
&pmbuf->out_ts_sec,
|
|
&pmbuf->out_ts_usec);
|
|
PRINTM_NETINTF(MDATA, priv);
|
|
PRINTM(MDATA, "%lu.%06lu : Data => kernel seq_num=%d tid=%d\n",
|
|
pmbuf->out_ts_sec, pmbuf->out_ts_usec, prx_pd->seq_num,
|
|
prx_pd->priority);
|
|
|
|
ret = pmadapter->callbacks.moal_recv_packet(pmadapter->pmoal_handle,
|
|
pmbuf);
|
|
if (ret == MLAN_STATUS_FAILURE) {
|
|
PRINTM(MERROR,
|
|
"uAP Rx Error: moal_recv_packet returned error\n");
|
|
pmbuf->status_code = MLAN_ERROR_PKT_INVALID;
|
|
}
|
|
|
|
if (ret != MLAN_STATUS_PENDING)
|
|
pmadapter->ops.data_complete(pmadapter, pmbuf, ret);
|
|
#ifdef USB
|
|
else if (IS_USB(pmadapter->card_type))
|
|
pmadapter->callbacks.moal_recv_complete(pmadapter->pmoal_handle,
|
|
MNULL,
|
|
pmadapter->rx_data_ep,
|
|
ret);
|
|
#endif
|
|
done:
|
|
LEAVE();
|
|
return ret;
|
|
}
|