mochabin/mwifiex
1
0
Fork 0
mirror of https://github.com/nxp-imx/mwifiex.git synced 2024-05-17 02:29:21 +00:00
Code Issues Packages Projects Releases Wiki Activity
mwifiex/mxm_wifiex/wlan_src/mlinux/moal_priv.h
Sherry Sun 8ffae47921 mxm_wifiex: update to mxm5x17283 release 
changes:
1. WCSWREL-191: Fixed the error when loading module param from user config for SD8801
2. WCSWREL-186: Fixed the issue of mlanutl failing on kernel higher than L5.15
3. Fixed low throughput issue for WPA3 SAE
4. Added driver change for WLAN throughput improvement on 8997 SoC
5. Updated README to recommend not to use WEP/TKIP for all chipsets
6. WCSWREL-180: Fix P2P test fail on kernel higher than L5.12
7. WCSWREL-156: kernel_write/kernel_read not allowed by drivers for L5.10 kernel GKI buildou
8. Alternative for pm_qos_add_request/pm_qos_remove_request

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Approved-by: Tian Yang <yang.tian@nxp.com>
2021-10-12 12:16:50 +08:00

295 lines
9.7 KiB
C
Raw Blame History

/** @file moal_priv.h
*
* @brief This file contains definition for extended private IOCTL call.
*
*
* Copyright 2008-2020 NXP
*
* This software file (the File) is distributed by NXP
* under the terms of the GNU General Public License Version 2, June 1991
* (the License). You may use, redistribute and/or modify the File in
* accordance with the terms and conditions of the License, a copy of which
* is available by writing to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
* worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
*
* THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
* this warranty disclaimer.
*
*/
/********************************************************
Change log:
10/31/2008: initial version
********************************************************/
#ifndef _WOAL_PRIV_H_
#define _WOAL_PRIV_H_
/** 2K bytes */
#define WOAL_2K_BYTES 2000
/** PRIVATE CMD ID */
#define WOAL_IOCTL (SIOCIWFIRSTPRIV) /* 0x8BE0 defined in wireless.h */
/** Private command ID to set one int/get word char */
#define WOAL_SETONEINT_GETWORDCHAR (WOAL_IOCTL + 1)
/** Private command ID to get version */
#define WOAL_VERSION 1
/** Private command ID to get extended version */
#define WOAL_VEREXT 2
/** Private command ID to set/get none */
#define WOAL_SETNONE_GETNONE (WOAL_IOCTL + 2)
/** Private command ID for warm reset */
#define WOAL_WARMRESET 1
/**
* Linux Kernels later 3.9 use CONFIG_PM_RUNTIME instead of
* CONFIG_USB_SUSPEND
*/
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 10, 0)
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 19, 0)
#ifdef CONFIG_PM
#ifndef CONFIG_USB_SUSPEND
#define CONFIG_USB_SUSPEND
#endif
#endif
#else /* LINUX_VERSION_CODE >= KERNEL_VERSION(3, 19, 0) */
#ifdef CONFIG_PM_RUNTIME
#ifndef CONFIG_USB_SUSPEND
#define CONFIG_USB_SUSPEND
#endif
#endif
#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(3, 19, 0) */
#endif
#ifdef CONFIG_USB_SUSPEND
/** Private command ID for usb suspend */
#define WOAL_USB_SUSPEND 2
/** Private command ID for usb resume */
#define WOAL_USB_RESUME 3
#endif /* CONFIG_USB_SUSPEND */
/** Private command ID to clear 11d chan table */
#define WOAL_11D_CLR_CHAN_TABLE 4
/** Private command ID to set/get sixteen int */
#define WOAL_SET_GET_SIXTEEN_INT (WOAL_IOCTL + 3)
/** Private command ID to set/get TX power configurations */
#define WOAL_TX_POWERCFG 1
#ifdef DEBUG_LEVEL1
/** Private command ID to set/get driver debug */
#define WOAL_DRV_DBG 2
#endif
/** Private command ID to set/get beacon interval */
#define WOAL_BEACON_INTERVAL 3
/** Private command ID to get RSSI */
#define WOAL_SIGNAL 5
/** Private command ID to set/get Deep Sleep mode */
#define WOAL_DEEP_SLEEP 7
/** Private command ID for 11n ht configration */
#define WOAL_11N_TX_CFG 8
/** Private command ID for 11n usr ht configration */
#define WOAL_11N_HTCAP_CFG 9
/** Private command ID for TX Aggregation */
#define WOAL_PRIO_TBL 10
/** Private command ID for Updating ADDBA variables */
#define WOAL_ADDBA_UPDT 11
/** Private command ID to set/get Host Sleep configuration */
#define WOAL_HS_CFG 12
/** Private command ID to set Host Sleep parameters */
#define WOAL_HS_SETPARA 13
/** Private command ID to read/write registers */
#define WOAL_REG_READ_WRITE 14
/** Private command ID to set/get band/adhocband */
#define WOAL_BAND_CFG 15
/** Private command ID for TX Aggregation */
#define WOAL_11N_AMSDU_AGGR_CTRL 17
/** Private command ID to set/get Inactivity timeout */
#define WOAL_INACTIVITY_TIMEOUT_EXT 18
#ifdef SDIO
/** Private command ID to turn on/off sdio clock */
#define WOAL_SDIO_CLOCK 19
/** Private command ID to read/write Command 52 */
#define WOAL_CMD_52RDWR 20
#endif
/** Private command ID to set/get scan configuration parameter */
#define WOAL_SCAN_CFG 21
/** Private command ID to set/get PS configuration parameter */
#define WOAL_PS_CFG 22
/** Private command ID to read/write memory */
#define WOAL_MEM_READ_WRITE 23
#ifdef SDIO
/** Private command ID to control SDIO MP-A */
#define WOAL_SDIO_MPA_CTRL 25
#endif
/** Private command ID for Updating ADDBA variables */
#define WOAL_ADDBA_REJECT 27
/** Private command ID to set/get sleep parameters */
#define WOAL_SLEEP_PARAMS 28
/** Private command ID to set/get TX BF capabilities */
#define WOAL_TX_BF_CAP 31
/** Private command ID to set/get dfs testing settings */
#define WOAL_DFS_TESTING 33
/** Private command ID to set/get CFP table codes */
#define WOAL_CFP_CODE 34
/** Private command ID to set/get tx/rx antenna */
#define WOAL_SET_GET_TX_RX_ANT 35
/** Private command ID to set/get management frame passthru mask */
#define WOAL_MGMT_FRAME_CTRL 36
/** Private command ID to configure gpio independent reset */
#define WOAL_IND_RST_CFG 37
/** Private command ID to set one int/get one int */
#define WOAL_SETONEINT_GETONEINT (WOAL_IOCTL + 5)
/** Private command ID to set/get Tx rate */
#define WOAL_SET_GET_TXRATE 1
/** Private command ID to set/get region code */
#define WOAL_SET_GET_REGIONCODE 2
/** Private command ID to turn on/off radio */
#define WOAL_SET_RADIO 3
/** Private command ID to enable WMM */
#define WOAL_WMM_ENABLE 4
/** Private command ID to enable 802.11D */
#define WOAL_11D_ENABLE 5
/** Private command ID to set/get QoS configuration */
#define WOAL_SET_GET_QOS_CFG 7
#if defined(REASSOCIATION)
/** Private command ID to set/get reassociation setting */
#define WOAL_SET_GET_REASSOC 9
#endif /* REASSOCIATION */
/** Private command ID for Updating Transmit buffer configration */
#define WOAL_TXBUF_CFG 10
/** Private command ID to set/get WWS mode */
#define WOAL_SET_GET_WWS_CFG 12
/** Private command ID to set/get sleep period */
#define WOAL_SLEEP_PD 13
/** Private command ID to set/get auth type */
#define WOAL_AUTH_TYPE 18
/** Private command ID to set/get port control */
#define WOAL_PORT_CTRL 19
#ifdef WIFI_DIRECT_SUPPORT
#if defined(STA_SUPPORT) && defined(UAP_SUPPORT)
/** Private command ID for set/get BSS role */
#define WOAL_SET_GET_BSS_ROLE 21
#endif
#endif
/** Private command ID for set/get 11h local power constraint */
#define WOAL_SET_GET_11H_LOCAL_PWR_CONSTRAINT 22
/** Private command ID to set/get 11N HT stream configuration */
#define WOAL_HT_STREAM_CFG 23
/** Private command ID to set/get MAC control */
#define WOAL_MAC_CONTROL 24
/** Private command ID to get thermal value */
#define WOAL_THERMAL 25
/** Private command ID to set/get hs cfg param */
#define WOAL_CFG_HOTSPOT 26
/** Private command ID to get log */
#define WOALGETLOG (WOAL_IOCTL + 7)
/** Private command ID to set a wext address variable */
#define WOAL_SETADDR_GETNONE (WOAL_IOCTL + 8)
/** Private command ID to send deauthentication */
#define WOAL_DEAUTH 1
/** Private command to get/set 256 chars */
#define WOAL_SET_GET_256_CHAR (WOAL_IOCTL + 9)
/** Private command to read/write passphrase */
#define WOAL_PASSPHRASE 1
#define WOAL_ASSOCIATE 3
/** Private command ID to get WMM queue status */
#define WOAL_WMM_QUEUE_STATUS 4
/** Private command ID to get Traffic stream status */
#define WOAL_WMM_TS_STATUS 5
#define WOAL_IP_ADDRESS 7
/** Private command ID to set/get TX bemaforming */
#define WOAL_TX_BF_CFG 8
/** Private command ID to get PTK/GTK */
#define WOAL_GET_KEY 9
/** Get log buffer size */
#define GETLOG_BUFSIZE 1500
/** Private command ID to set none/get twelve chars*/
#define WOAL_SETNONE_GETTWELVE_CHAR (WOAL_IOCTL + 11)
/** Private command ID for WPS session */
#define WOAL_WPS_SESSION 1
/** Private command ID to set none/get four int */
#define WOAL_SETNONE_GET_FOUR_INT (WOAL_IOCTL + 13)
/** Private command ID to get data rates */
#define WOAL_DATA_RATE 1
/** Private command ID to get E-Supplicant mode */
#define WOAL_ESUPP_MODE 2
/** Private command to get/set 64 ints */
#define WOAL_SET_GET_64_INT (WOAL_IOCTL + 15)
/** Private command ID to set/get ECL system clock */
#define WOAL_ECL_SYS_CLOCK 1
/** Private command ID for hostcmd */
#define WOAL_HOST_CMD (WOAL_IOCTL + 17)
/** Private command ID for arpfilter */
#define WOAL_ARP_FILTER (WOAL_IOCTL + 19)
/** Private command ID to set ints and get chars */
#define WOAL_SET_INTS_GET_CHARS (WOAL_IOCTL + 21)
/** Private command ID to read EEPROM data */
#define WOAL_READ_EEPROM 1
/** Private command ID to set/get 2K bytes */
#define WOAL_SET_GET_2K_BYTES (WOAL_IOCTL + 23)
#ifdef SDIO
/** Private command ID to read/write Command 53 */
#define WOAL_CMD_53RDWR 2
#endif
/** Private command ID for setuserscan */
#define WOAL_SET_USER_SCAN 3
/** Private command ID for getscantable */
#define WOAL_GET_SCAN_TABLE 4
/** Private command ID for setuserscanext: async without wait */
#define WOAL_SET_USER_SCAN_EXT 5
/** Private command ID to request ADDTS */
#define WOAL_WMM_ADDTS 7
/** Private command ID to request DELTS */
#define WOAL_WMM_DELTS 8
/** Private command ID to queue configuration */
#define WOAL_WMM_QUEUE_CONFIG 9
/** Private command ID to queue stats */
#define WOAL_WMM_QUEUE_STATS 10
/** Private command ID to Bypass auth packet */
#define WOAL_BYPASSED_PACKET 11
#ifdef UAP_WEXT
/** The following command IDs are for Froyo app */
/** Private command ID to start driver */
#define WOAL_FROYO_START (WOAL_IOCTL + 28)
/** Private command ID to reload FW */
#define WOAL_FROYO_WL_FW_RELOAD (WOAL_IOCTL + 29)
/** Private command ID to stop driver */
#define WOAL_FROYO_STOP (WOAL_IOCTL + 30)
#endif
/** moal_802_11_rates */
typedef struct _moal_802_11_rates {
/** Num of rates */
t_u8 num_of_rates;
/** Rates */
t_u8 rates[MLAN_SUPPORTED_RATES];
} moal_802_11_rates, *pmoal_802_11_rates;
#if defined(STA_WEXT) || defined(UAP_WEXT)
int woal_wext_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd);
#endif
#endif /* _WOAL_PRIV_H_ */
Reference in a new issue View git blame Copy permalink