mirror of
https://github.com/nxp-imx/mwifiex.git
synced 2024-11-15 03:25:35 +00:00
33d9f8e4f3
Add initial MxM (multi-chip-multi-interface) wifi driver. The driver target is to support 88w8987/88w8997/88w9098, currently it only supports 88w8987. The MxM wifi driver is merged from below repo and applied some patches for block and build issues. ssh://git@bitbucket.sw.nxp.com/wcswrel/ rel-nxp-wifi-fp92-bt-fp85-linux-android-mxm4x17169-gpl.git The sdk only includes application, the driver already is merged into linux kernel. Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
51 lines
2.3 KiB
Text
51 lines
2.3 KiB
Text
#CW_MODE settings configuration
|
|
#
|
|
CW_MODE={
|
|
#Mode of operation 0: Disable current Tx Mode, 1: Continuous Tx Packet, 2: Continuous Wave/Tone
|
|
Mode=1
|
|
#Channel number
|
|
Channel=6
|
|
#channel Info
|
|
#bit [3:0] - channel offset 0: no secondary channel, 1: secondary channel above, 2: reserved, 3: secondary channel below
|
|
#bit [4:7] - channel band 0: 2.4G, 1: 5G, 2: 4G, 3: reserved
|
|
Chaninfo=0x00
|
|
#Tx power for Cont Tx in dbm
|
|
TxPower=12
|
|
# Packet Length for Cont Tx
|
|
# legacy rates: upto 2312, HT/VHT rates: upto 8K
|
|
PktLength=2048
|
|
#RateInfo for Cont Tx
|
|
RateInfo=0x0000
|
|
#rateInfo = 0x0732 : format = VHT, Bandwidth = 80MHz, datarate/MCS index = MCS7
|
|
#rateInfo = 0x0000 : format = legacy, Bandwidth = 20MHz, datarate/MCS index = 1Mbps
|
|
#rateInfo = 0x0521 : format = HT, Bandwidth = 40MHz, datarate/MCS index = MCS5
|
|
#rateInfo = 0x4521 : format = HT, Bandwidth = 40MHz, datarate/MCS index = MCS5, NSS = 1
|
|
#rateInfo = 0x8921 : format = HT, Bandwidth = 40MHz, datarate/MCS index = MCS9, NSS = 2
|
|
#bit [1:0] - Format 0: legacy, 1: 11n (HT), 2: 11ac (VHT)
|
|
#bit 2 - STBC (Not used for Cont Tx test)
|
|
#bit 3 - Beamforming (Not used for Cont Tx test)
|
|
#bit [5:4] - Bandwidth 0: 20MHz, 2: 40MHz, 3: 80MHz
|
|
#bit [7:6] - reserved
|
|
#bit [13:8] - index : data rate or MCS
|
|
#bit [15:14]- NSS (Used for 2x2 chips). Used in FW only for 2x2 chips.
|
|
#<index> can take following values.
|
|
#If <format> is 0 (LG), #If <format> is 1 (HT) #If <format> is 2 (VHT)
|
|
# NSS = 1 NSS = 1 or 2
|
|
# 0 1 Mbps 0 MCS0 0 MCS0
|
|
# 1 2 Mbps 1 MCS1 1 MCS1
|
|
# 2 5.5 Mbps 2 MCS2 2 MCS2
|
|
# 3 11 Mbps 3 MCS3 3 MCS3
|
|
# 5 6 Mbps 4 MCS4 4 MCS4
|
|
# 6 9 Mbps 5 MCS5 5 MCS5
|
|
# 7 12 Mbps 6 MCS6 6 MCS6
|
|
# 8 18 Mbps 7 MCS7 7 MCS7
|
|
# Used only for NSS = 2
|
|
# 9 24 Mbps 8 MCS8
|
|
# 10 36 Mbps 9 MCS9
|
|
# 11 48 Mbps 10 MCS10
|
|
# 12 54 Mbps 11 MCS11
|
|
# 12 MCS12
|
|
# 13 MCS13
|
|
# 14 MCS14
|
|
# 15 MCS15
|
|
}
|