mirror of
https://github.com/nxp-imx/mwifiex.git
synced 2024-05-15 01:29:20 +00:00
2a2b474597
New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
44 lines
1 KiB
Plaintext
44 lines
1 KiB
Plaintext
# File : robust_btc_MM.conf
|
|
|
|
######################### Robust Coex command ###############
|
|
mode_get={
|
|
CmdCode=0x00e0 # do NOT change this line
|
|
Action:2=0 # GET
|
|
RSVD:2=0
|
|
|
|
# Robust Coex Mode TLV
|
|
RobustCoexTlvType:2=0x0160
|
|
RobustCoexTlvLength:2={
|
|
Enable:1=0x00 # Read-back Coex mode(s)
|
|
Reserved:3=0
|
|
}
|
|
}
|
|
|
|
mode_none={
|
|
CmdCode=0x00e0 # do NOT change this line
|
|
Action:2=1 # SET
|
|
RSVD:2=0
|
|
|
|
# Robust Coex Mode TLV
|
|
RobustCoexTlvType:2=0x0160
|
|
RobustCoexTlvLength:2={
|
|
Enable:1=0 # Concurrent Coex mode. Used for chips which has
|
|
# separate antenna for BT
|
|
Reserved:3=0
|
|
}
|
|
}
|
|
|
|
mode_bca={
|
|
CmdCode=0x00e0 # do NOT change this line
|
|
Action:2=1 # SET
|
|
RSVD:2=0
|
|
|
|
# Robust Coex Mode TLV
|
|
RobustCoexTlvType:2=0x0160
|
|
RobustCoexTlvLength:2={
|
|
Enable:1=0x08 # BCA Coex mode.
|
|
# Pure HW BCA based WLAN and BT traffic arbitration.
|
|
Reserved:3=0
|
|
}
|
|
}
|