mwifiex/mwifiex_8997/mapp/uaputl/config/uaputl.conf
Fugang Duan bd8827d169 mwifiex: 8997: add W16.68.10.p16 release sdk
The sdk release is from NXP offial web:
https://www.nxp.com/products/wireless/wi-fi-plus-bluetooth/
88w8997-wi-fi-dual-band-with-bluetooth-5-for-a-v-streaming-and-digital-tv:88W8997?tab=Design_Tools_Tab

The release file is:
PCIE-WLAN-UART-BT-8997-U16-X86-W16.68.10.p16-16.26.10.p16-C4X16640_V4-MGPL

The sdk version is: W16.68.10.p16

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
2020-01-13 10:35:39 +08:00

149 lines
6.9 KiB
Text
Executable file

# File : uaputl.conf
ap_config={
SSID="Marvell Micro AP" # SSID of Micro AP, use '\' as an escape character before '"' character in SSID
BeaconPeriod=100 # Beacon period in TU
Channel=6 # Radio Channel 6
# Channel=0,1 # auto channel select (MCS mode)
# Channel=6,2 # primary channel 6, secondary channel above.
# Channel=6,4 # primary channel 6, secondary channel below
ChanList=1,6,11 # Scan channel list
# AP_MAC=00:34:22:77:46:41 # MAC address of AP
Band=0 # 0 for 2.4GHz band
# 1 for 5GHz band
Rate=0x82,0x84,0x8b,0x96,0x0C,0x12,0x18,0x24,0x30,0x48,0x60,0x6c
# Set of data rate that a station
# in the BSS may use
# (in unit of 500 kilobit/s)
TxPowerLevel=13 # Transmit power level in dBm
BroadcastSSID=1 # Broadcast SSID feature
# 1: Enable 0:Disable
RTSThreshold=2347 # RTS threshold value
FragThreshold=2346 # Fragmentation threshold value
DTIMPeriod=1 # DTIM period in beacon periods
MCBCdataRate=0 # MCBC rate to use for packet transmission
# 0:auto
# >0 fix rate (in unit of 500 kilobit/s)
# TxBeaconRate=0 # Beacon rate to use for Beacon transmission
# 0:auto
# >0 fix rate (in unit of 500 kilobit/s)
PktFwdCtl=1 # Packet forwarding control
# 0: forward all packets to the host
# 1: firmware handles intr-BSS packets
StaAgeoutTimer=1800 # Inactive client station age out timer value
# in units of 100ms
PSStaAgeoutTimer=400 # Inactive client PS station age out timer value
# in units of 100ms
MaxStaNum=10 # Max number of stations allowed to connect
Retrylimit=7 # Retry limit to use for packet transmissions
AuthMode=0 # 0:Open authentication
# 1:shared key authentication
Protocol=1 # protocol to use
# 1: No security 2: Static WEP
# 8: WPA 32: WPA2 40:WPA2 Mixed Mode
RSNReplayProtection=0 # RSN replay protection 0: disabled, 1: enabled
PairwiseUpdateTimeout=100 #Pairwise Handshake update timeout: 100ms
PairwiseHandshakeRetries=3 #Pairwise Handshake retries: 3
GroupwiseUpdateTimeout=100 #Groupwise Handshake update timeout: 100ms
GroupwiseHandshakeRetries=3 #Groupwise Handshake retries: 3
# **** WEP security setting******
# KeyIndex=0 # Index of WEP key to use (0 to 3)
# Sample Key configurations are
# Key_0="55555"
# Key_1=1234567890
# Key_2="1234567890123"
# Key_3=12345678901234567890123456
# **** Pairwise Cipher setting******
# Configure both of the following for Protocol=40
# PwkCipherWPA=4 # Pairwise cipher type
# 4: TKIP 8: AES CCMP
# 12: AES CCMP + TKIP
# PwkCipherWPA2=8 # Pairwise cipher type
# 4: TKIP 8: AES CCMP
# 12: AES CCMP + TKIP
# **** Group Cipher setting******
# GwkCipher=4 # group cipher type
# 4: TKIP 8: AES CCMP
# PSK="1234567890" # WPA/WPA2 passphrase
GroupRekeyTime= 86400 # Group key re-key interval, in second.
# 0 mean never re-key
Enable11n=1 # 1 to enable, 0 to disable
HTCapInfo=0x111c # HTCapInfo
# Bit 15-13: Reserved set to 0
# Bit 12: DSS/CCK mode in 40MHz enable/disable
# Bit 11-10: Reserved set to 0
# Bit 9-8: Reserved set to 0x01
# Bit 7: Reserved set to 0
# Bit 6: Short GI in 40 Mhz enable/disable
# Bit 5: Short GI in 20 Mhz enable/disable
# Bit 4: Green field enable/disble
# Bit 3-2: Reserved set to 1
# Bit 1: 20/40 Mhz enable disable.
# Bit 0: Reserved set to 0
AMPDU=0x03 # AMPDU
# Bit 7-5: Reserved set to 0
# Bit 4-2: Minimum MPDU Start spacing
# Set to 0 for no restriction
# Set to 1 for 1/4 us
# Set to 2 for 1/2 us
# Set to 3 for 1 us
# Set to 4 for 2 us
# Set to 5 for 4 us
# Set to 6 for 8 us
# Set to 7 for 16 us
# Bit 1-0: Max A-MPDU length
HT_MCS_MAP=0x0000ffff # Bit 7-0: MCS_SET_0
# Bit 15-8:MCS_SET_1
# Enable2040Coex=1 #Enable 20/40 coex feature
#802.11D specific configuration
11d_enable=0 # 0-disable 1-enable
# country=US # country information
}
ap_mac_filter={
FilterMode=0 # Mode of filter table
# 0: filter table is disabled
# 1: allow MAC address in the filter table to associate
# 2: block MAC address in the filter table
Count=0 # Number of entries in filter table,up to 16
#Sample mac settings are
# mac_1=00:50:23:45:76:22 # mac address
# mac_2=00:34:22:77:46:34 # mac address
}
# Wmm param setting
Wmm_parameters={
Qos_info=0x80
AC_BE
Aifsn=1
Ecw_max=1
Ecw_min=1
Tx_op=1
AC_BK
Aifsn=2
Ecw_max=2
Ecw_min=2
Tx_op=2
AC_VI
Aifsn=3
Ecw_max=3
Ecw_min=3
Tx_op=3
AC_VO
Aifsn=4
Ecw_max=4
Ecw_min=4
Tx_op=4
}