mwifiex/mwifiex_8997/mapp/mlanconfig/config/robust_btc.conf
Fugang Duan bd8827d169 mwifiex: 8997: add W16.68.10.p16 release sdk
The sdk release is from NXP offial web:
https://www.nxp.com/products/wireless/wi-fi-plus-bluetooth/
88w8997-wi-fi-dual-band-with-bluetooth-5-for-a-v-streaming-and-digital-tv:88W8997?tab=Design_Tools_Tab

The release file is:
PCIE-WLAN-UART-BT-8997-U16-X86-W16.68.10.p16-16.26.10.p16-C4X16640_V4-MGPL

The sdk version is: W16.68.10.p16

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
2020-01-13 10:35:39 +08:00

212 lines
6.3 KiB
Text
Executable file

# File : robust_btc.conf
######################### Robust Coex command ###############
mode_get={
CmdCode=0x00e0 # do NOT change this line
Action:2=0 # GET
RSVD:2=0
# Robust Coex Mode TLV
RobustCoexTlvType:2=0x0160
RobustCoexTlvLength:2={
Enable:1=0x00 # Read-back Coex mode(s)
Reserved:3=0
}
}
mode_timeshare={
CmdCode=0x00e0 # do NOT change this line
Action:2=1 # SET
RSVD:2=0
# Robust Coex Mode TLV
RobustCoexTlvType:2=0x0160
RobustCoexTlvLength:2={
# All the modes below are mutually exclusive of each other;
Enable:1=0x01 # Bit0: Enable 2x2 or 1x1 Time Distribute(TMD)
# Robust Coex(RBC) mode, when uAP bss start,
# uAP TMD RBC scheme is enabled,
# STA TMD RBC scheme is disabled.
Reserved:3=0
}
}
mode_spatial={
CmdCode=0x00e0 # do NOT change this line
Action:2=1 # SET
RSVD:2=0
# Robust Coex Mode TLV
RobustCoexTlvType:2=0x0160
RobustCoexTlvLength:2={
# All the modes below are mutually exclusive of each other;
Enable:1=0x82 # Bit1: Enable 1x1 SMPS Spatial RBC Mode, e.g. 0x02
# Bit7: Enable uAP+STA SMPS RBC Mode,
# when uAP bss start, uAP SMPS RBC scheme enable,
# must combined with BIT1 or BIT2, e.g. 0x82, 0x84.
Reserved:3=0
}
}
mode_none={
CmdCode=0x00e0 # do NOT change this line
Action:2=1 # SET
RSVD:2=0
# Robust Coex Mode TLV
RobustCoexTlvType:2=0x0160
RobustCoexTlvLength:2={
Enable:1=0 # Concurrent Coex mode. Used for chips which has
# separate antenna for BT
Reserved:3=0
}
}
mode_2={
CmdCode=0x00e0 # do NOT change this line
Action:2=1 # SET
RSVD:2=0
# Robust Coex Mode TLV
RobustCoexTlvType:2=0x0160
RobustCoexTlvLength:2={
Enable:1=0x20 # Concurrent Coex mode with Tx power control and Rx De-sense.
# Used for chips which has separate antenna for BT
Reserved:3=0
}
}
gpio_cfg={
CmdCode=0x00e0 # do NOT change this line
Action:2=1 # SET
RSVD:2=0
# Robust Coex Mode TLV
RobustCoexTlvType:2=0x021B
RobustCoexTlvLength:2={
Enable:1=0x1 # enable GPIO cfg for external bt request
gpionum:1=4 # gpio 4
gpiopolarity:1=1 # Polarity High
}
}
external_coex_config={
CmdCode=0x00e0
Action:2=1 //0x0 get, 0x1 set
RSVD:2=0
RobustCoexTlvType:2=0x0238 //TLV ID
RobustCoexTlvLength:2={
Enabled:1=0x01 // 0x00 disable, 0x01 enalbe
ExtHighInputPriority:1=0x02 // Input priority: 0x00 Input Low Priority, 0x01 Input Medium Priority, 0x02 Input High Priority
ExtLowInputPriority:1=0x02
ExtPriGPIONum:1=0x06; // Input Priority signal GPIO pin number
ExtPriGPIOPolarity:1=0x01; // Polarity: 0x00 Active Low, 0x01 Active High
ExtReqGPIONum:1=0x07; // Input Request signal GPIO pin number
ExtReqGPIOPolarity:1=0x01; // Polarity: 0x00 Active Low, 0x01 Active High
ExtGrntGPIONum:1=0x05; // Output Grant signal GPIO pin number
ExtGrntGPIOPolarity:1=0x01; // Polarity: 0x00 Active Low, 0x01 Active High
}
}
#In Station generic case
#BT time is set as BTTime
#Wlan time is set as Wlan Time
generictime={
CmdCode=0x00e0
Action:2=1
RSVD:2=0
RobustCoexTlvType:2=0x0390
RobustCoexTlvLength:2={
Enable:2=0x01
BtTime:2=10000 #(10ms) BTTime must be less than 65535
WlanTime:2=40000 #(40ms) WlanTime must be less than 65535
}
}
#In Station A2DP case
#BT time is set as BTTime
#Wlan time is set as Wlan Time
a2dptime={
CmdCode=0x00e0
Action:2=1
RSVD:2=0
RobustCoexTlvType:2=0x0391
RobustCoexTlvLength:2={
Enable:2=0x01
BtTime:2=10000 #(10ms) BTTime must be less than 65535
WlanTime:2=39500 #(39.5ms) WlanTime must be less than 65535
}
}
#In Station inquiry case
#BT time is set as BTTime
#Wlan time is set as Wlan Time
inquirytime={
CmdCode=0x00e0
Action:2=1
RSVD:2=0
RobustCoexTlvType:2=0x0392
RobustCoexTlvLength:2={
Enable:2=0x01
BtTime:2=21215 #(21.215ms) BTTime must be less than 65535
WlanTime:2=11000 #(11ms) WlanTime must be less than 65535
}
}
#In Ap generic case
#BT time is BTTimeBusy when BT has traffic
#BT time is BTTimeIdle when BT is idle
#Wlan time is WlanTimeBusy when Wlan has traffic
#Wlan time is WlanTimeIdle when Wlan is idle
ap_generictime={
CmdCode=0x00e0
Action:2=1
RSVD:2=0
RobustCoexTlvType:2=0x0393
RobustCoexTlvLength:2={
Enable:2=0x01
BtTime_MAX:2=23000 #(23ms) BTTime(BT Busy) must be less than 28767
BtTime_MIN:2=6500 #(6.5ms) BTTime(BT Idle) must be less than 28767
WlanTime_MAX:2=18000 #(18ms) WlanTime(Wlan Busy) must be less than 32767
WlanTime_MIN:2=5750 #(5.75ms) WlanTime(Wlan Idle) must be less than 32767
}
}
#In Ap A2DP case
#BT time is change from BTTimeMax to BTTimeMin
#Wlan time is change from WlanTimeMax to WlanTimeMin
ap_a2dptime={
CmdCode=0x00e0
Action:2=1
RSVD:2=0
RobustCoexTlvType:2=0x0394
RobustCoexTlvLength:2={
Enable:2=0x01
BtTimebusy:2=23000 #(23ms) Maximum BTTime must be less than 32767
BtTimeidle:2=6500 #(6.5ms) Minimum BTTime must be less than 32767
WlanTimebusy:2=18000 #(18ms) Maximum WlanTime must be less than 32767
WlanTimeidle:2=5750 #(5.75ms) Minimum WlanTime must be less than 32767
}
}
#In Ap inquiry case
#BT time is set as BTTime
#Wlan time is set as Wlan Time
ap_inquirytime={
CmdCode=0x00e0
Action:2=1
RSVD:2=0
RobustCoexTlvType:2=0x0395
RobustCoexTlvLength:2={
Enable:2=0x01
BtTime:2=28750 #(28.75ms) BTTime must less than 32767
WlanTime:2=20000 #(20ms) WlanTime must be less than 32767
}
}
######################### Robust Coex command ###############