mirror of
https://github.com/nxp-imx/mwifiex.git
synced 2024-11-20 09:01:44 +00:00
bd8827d169
The sdk release is from NXP offial web: https://www.nxp.com/products/wireless/wi-fi-plus-bluetooth/ 88w8997-wi-fi-dual-band-with-bluetooth-5-for-a-v-streaming-and-digital-tv:88W8997?tab=Design_Tools_Tab The release file is: PCIE-WLAN-UART-BT-8997-U16-X86-W16.68.10.p16-16.26.10.p16-C4X16640_V4-MGPL The sdk version is: W16.68.10.p16 Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
204 lines
6.4 KiB
Text
Executable file
204 lines
6.4 KiB
Text
Executable file
# File : mef_mdns.conf
|
|
|
|
######################### MEF Configuration command ##################
|
|
mefcfg={
|
|
#Criteria: bit0-broadcast, bit1-unicast, bit3-multicast
|
|
Criteria=8 # Multicast frames are received during hostsleepmode
|
|
NumEntries=2 # Number of activated MEF entries
|
|
#mef_entry_0: example filters to match WS-Discovery pkt for IPv4.
|
|
mef_entry_0={
|
|
#mode: bit0--hostsleep mode, bit1--non hostsleep mode
|
|
mode=1 # HostSleep mode
|
|
#action: 0--discard and not wake host, 1--discard and wake host 3--allow and wake host
|
|
action=3 # Allow and Wake host
|
|
filter_num=4 # Number of filter
|
|
#RPN only support "&&" and "||" operator,space can not be removed between operator.
|
|
RPN=Filter_0 && Filter_1 && Filter_2 && Filter_3
|
|
#Filter_0 will match IPv4 protocol packet
|
|
Filter_0={
|
|
type=0x41
|
|
repeat=1
|
|
byte=08:00
|
|
offset=20
|
|
}
|
|
#Filter_1 will match dest multicast IPv4 address 224.0.0.251
|
|
Filter_1={
|
|
type=0x41
|
|
repeat=1
|
|
byte=e0:00:00:fb
|
|
offset=38
|
|
}
|
|
#Filter_2 will match UDP packet
|
|
Filter_2={
|
|
type=0x42
|
|
pattern=17
|
|
offset=31
|
|
numbyte=1
|
|
}
|
|
#Filter_3 will match UDP port 5353
|
|
Filter_3={
|
|
type=0x42
|
|
pattern=5353
|
|
offset=44
|
|
numbyte=2
|
|
}
|
|
}
|
|
#mef_entry_1: example filters to match WS-Discovery pkt for IPv6.
|
|
mef_entry_1={
|
|
#mode: bit0--hostsleep mode, bit1--non hostsleep mode
|
|
mode=1 # HostSleep mode
|
|
#action: 0--discard and not wake host, 1--discard and wake host 3--allow and wake host
|
|
action=3 # Allow and Wake host
|
|
filter_num=4 # Number of filter
|
|
#RPN only support "&&" and "||" operator,space can not be removed between operator.
|
|
RPN=Filter_0 && Filter_1 && Filter_2 && Filter_3
|
|
#Filter_0 will match IPv4 protocol packet
|
|
Filter_0={
|
|
type=0x41
|
|
repeat=1
|
|
byte=86:dd
|
|
offset=20
|
|
}
|
|
#Filter_1 will match dest multicast IPv6 address FF02::FB
|
|
Filter_1={
|
|
type=0x41
|
|
repeat=1
|
|
byte=ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:fb
|
|
offset=46
|
|
}
|
|
#Filter_2 will match UDP packet
|
|
Filter_2={
|
|
type=0x42
|
|
pattern=17
|
|
offset=28
|
|
numbyte=1
|
|
}
|
|
#Filter_3 will match UDP port 5353
|
|
Filter_3={
|
|
type=0x42
|
|
pattern=5353
|
|
offset=64
|
|
numbyte=2
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
#--------------------------examples for MEF filters--------------------------------
|
|
# example: filters to match ARP packet with protocol addr 192.168.0.104
|
|
# mef_entry_0={
|
|
# mode=1 # HostSleep mode
|
|
# action=3 # Allow and Wake host
|
|
# filter_num=3 # Number of filter
|
|
# RPN=Filter_0 && Filter_1 && Filter_2
|
|
# #Filter_0 looking for rx pkt with DA is broadcast address
|
|
# Filter_0={
|
|
# type=0x41
|
|
# repeat=6
|
|
# byte=ff
|
|
# offset=0
|
|
# }
|
|
# #Filter_1 looking for rx pkt with EtherType is 0x0806(ARP)
|
|
# Filter_1={
|
|
# type=0x41
|
|
# repeat=1
|
|
# byte=08:06
|
|
# offset=20
|
|
# }
|
|
# #Filter_2 looking for rx pkt with ARP target protocol addr 192.168.0.104
|
|
# Filter_2={
|
|
# type=0x41
|
|
# repeat=1
|
|
# byte=c0:a8:00:68
|
|
# offset=46
|
|
# }
|
|
# }
|
|
#-------------------------------------------------------------------------------------
|
|
# example: filter to check if the destination MAC address is unicast pkt
|
|
# mef_entry_0={
|
|
# mode=1 # HostSleep mode
|
|
# action=3 # Allow and Wake host
|
|
# filter_num=3 # Number of filter
|
|
# RPN=Filter_0
|
|
# #Filter_0 is Bit comparison filter, it always with type=0x43
|
|
# #Byte filter always has type, byte, mask, offset 4 filed
|
|
# #"byte" is the byte sequence constant with each byte in hex format, with ':' as delimiter between two byte
|
|
# #"mask" is also with each byte in hex format, with ':' as delimiter between two byte
|
|
# #"byte" should has the same length as "mask"
|
|
# #Filter_0 will check if the destination MAC address is unicast pkt
|
|
# Filter_0={
|
|
# type=0x43 #Bit comparison filter
|
|
# byte=00 #00 is the 1-byte sequence constant
|
|
# offset=0 #0 is the byte offset of the rx pkt
|
|
# mask=01 #1 is the 1-byte mask
|
|
# }
|
|
# }
|
|
#--------------------------------------------------------------------------------------------------
|
|
# example: Disable MEF filters
|
|
# mefcfg={
|
|
# #Criteria: bit0-broadcast, bit1-unicast, bit3-multicast
|
|
# Criteria=2 # Unicast frames are received during hostsleepmode
|
|
# NumEntries=0 # Number of activated MEF entries
|
|
# }
|
|
#--------------------------------------------------------------------------------------------------
|
|
# example: Test MEF filters
|
|
# mefcfg={
|
|
# Criteria=1
|
|
# NumEntries=1
|
|
# mef_entry_0={
|
|
# mode=4 # Test Mode
|
|
# action=16 # Invoke Test
|
|
# filter_num=0
|
|
# }
|
|
# }
|
|
#-----------------------------------------------------------------------------------------------------
|
|
# example: Test MEF filters
|
|
# mefcfg={
|
|
# Criteria=1
|
|
# NumEntries=1
|
|
# mef_entry_0={
|
|
# mode=4
|
|
# action=0
|
|
# filter_num=1
|
|
# RPN=Filter_0
|
|
# Filter_0={
|
|
# type=0x44 # test filter
|
|
# repeat=2 # 2 copies of 'BE:EF'
|
|
# byte=BE:EF # 'BE:EF' is the byte sequence constant
|
|
# offset=18 # 18 is the byte offset of the equal length field of rx'd pkt.
|
|
# dest=00:50:43:20:5a:82 # '00:50:43:20:5a:82' is the byte sequence constant
|
|
# }
|
|
# }
|
|
# }
|
|
#----------------------------------------------------------------------------------------------------
|
|
#example: Filter broadcast/ipv4 multicast/ipv6 multicast packets in non hostsleep mode
|
|
#mefcfg={
|
|
# Criteria=9 # broadcast and multicast frames
|
|
# NumEntries=1 # Number of activated MEF entries
|
|
# mef_entry_0={
|
|
# mode=2 # non HostSleep mode
|
|
# action=0 # discard and not wake host
|
|
# filter_num=3 # Number of filter
|
|
# RPN=Filter_0 || Filter_1 || Filter_2
|
|
# Filter_0={ # IPV4 multicast
|
|
# type=0x41 # byte comparison filter
|
|
# byte=01:00:5e # 01:00:5e is the byte constant to be compared
|
|
# offset=0 # 0 is the byte offset of the equal length field of rx'd pkt.
|
|
# repeat=1 #
|
|
# }
|
|
# Filter_1={ # broadcast packet check
|
|
# type=0x41 # Byte comparison filter
|
|
# repeat=6 # 6 copies of 'ff', means broadcast
|
|
# byte=ff # 'ff'(0xff) is the byte sequence constant with each byte
|
|
# # in hex format, with ':' as delimiter between two byte.
|
|
# offset=0 # 0 is the byte offset of the equal length field of rx'd pkt.
|
|
# }
|
|
# Filter_2={ # IPV6 multicast
|
|
# type=0x41 # byte comparison filter
|
|
# byte=33:33 # 33:33 is the byte constant to be compared
|
|
# offset=0 # 0 is the byte offset of the equal length field of rx'd pkt.
|
|
# repeat=1 #
|
|
# }
|
|
# }
|
|
#}
|
|
#------------------------------------------------------------------------------------------------------
|