mirror of
https://github.com/nxp-imx/mwifiex.git
synced 2024-05-17 02:29:21 +00:00
255269e2d3
changes:
1. WCSWREL-199: Fixed the build error on kernel higher than L5.12
2. WSW-16639: Improve the throughput by avoiding skb copy in amsdu deaggreation
3. WSW-15903: By default enabled pmqos=1 module param on IMX8 only and disable this for other platforms like X86
4. WSFD-411: Generate fw_dump files in HAL layer instead of driver
5. WSW-17154: Fixed the issue of driver crash seen with AGO+AGO restart stress test
6. WSFD-416: Added WPA3 R3 support using embedded supplicant
7. WSW-16171: Fixed the issue of DUT failed to roam to other AP2, when low RSSI hits on connected AP1
8. WSW-17323: Fixed the issue of not activating Channel 13 using DE or JP country codes
9. WSW-16630: APUT is not switching back from 20/40MHz to 20MHz channel bandwidth in the presence of 20MHz testbed AP
10. WCECCB-37: Added support for UNII-4 / upper 5 GHz channels
11. WSW-17368: Fixed the issue of System shutdown after switching AC power to battery
12. WSW-17447: Added RTT support enablement for Android
13. WSW-17453: Fixed the issue of 0x107 Command timeout for scan(iwlist)
14. WSW-17019: Fixed the issue of Wifi hang with timeout cmd id 0x20 due to interference from another device doing DPD
15. WSW-14: Added Support for IMX Linux Kernel 5.15.0
16. WSW-17450: Disable host based Link layer stats so that fw based stats will be used
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Approved-by: Tian Yang <yang.tian@nxp.com>
24 lines
1 KiB
Plaintext
24 lines
1 KiB
Plaintext
# File : ed_mac_ctrl_V3_9177.conf
|
|
#
|
|
# ed_mac_ctrl_v3 is used for W9177
|
|
# ./mlanutl mlan0 hostcmd config/ed_mac_ctrl_V3_9177.conf ed_mac_ctrl_v3
|
|
#
|
|
## Set Energy Detect Threshold for EU Adaptivity test
|
|
|
|
ed_mac_ctrl_v3={
|
|
CmdCode=0x0130 #Command code, DO NOT change this line
|
|
ed_ctrl_2g.enable:2=0x1 # 0 - disable EU adaptivity for 2.4GHz band
|
|
# 1 - enable EU adaptivity for 2.4GHz band
|
|
|
|
ed_ctrl_2g.offset:2=0xA # 0 - Default Energy Detect threshold
|
|
#offset value range: 0x80 to 0x7F
|
|
|
|
ed_ctrl_5g.enable:2=0x1 # 0 - disable EU adaptivity for 5GHz band
|
|
# 1 - enable EU adaptivity for 5GHz band
|
|
|
|
ed_ctrl_5g.offset:2=0xA # 0 - Default Energy Detect threshold
|
|
#offset value range: 0x80 to 0x7F
|
|
|
|
ed_ctrl_txq_lock:4=0x1e00FF #DO NOT Change this line
|
|
}
|