mirror of
https://github.com/nxp-imx/mwifiex.git
synced 2025-01-15 16:25:35 +00:00
bd8827d169
The sdk release is from NXP offial web: https://www.nxp.com/products/wireless/wi-fi-plus-bluetooth/ 88w8997-wi-fi-dual-band-with-bluetooth-5-for-a-v-streaming-and-digital-tv:88W8997?tab=Design_Tools_Tab The release file is: PCIE-WLAN-UART-BT-8997-U16-X86-W16.68.10.p16-16.26.10.p16-C4X16640_V4-MGPL The sdk version is: W16.68.10.p16 Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
2225 lines
83 KiB
Text
Executable file
2225 lines
83 KiB
Text
Executable file
===============================================================================
|
|
U S E R M A N U A L
|
|
|
|
Copyright (C) 2008-2019, Marvell International Ltd.
|
|
All Rights Reserved
|
|
|
|
1) FOR DRIVER BUILD
|
|
|
|
Goto source code directory wlan_src/.
|
|
make [clean] build
|
|
The driver and utility binaries can be found in ../bin_xxxx directory.
|
|
The driver code supports Linux kernel up to 5.0.9.
|
|
|
|
2) FOR DRIVER INSTALL
|
|
|
|
a) Copy firmware image pcie8897_uapsta.bin | ... to /lib/firmware/mrvl/ directory,
|
|
create the directory if it doesn't exist.
|
|
b) Install WLAN driver
|
|
There are drv_mode, max_sta_bss, max_uap_bss etc. module parameters.
|
|
The bit settings of drv_mode are,
|
|
Bit 0 : STA
|
|
Bit 1 : uAP
|
|
Bit 2 : WIFIDIRECT
|
|
Bit 4 : NAN
|
|
|
|
max_sta_bss: Maximum number of STA BSS (default 1, max 1)
|
|
sta_name: Name of the STA interface (default: "mlan")
|
|
max_uap_bss: Maximum number of uAP BSS (default 1, max 2)
|
|
uap_name: Name of the uAP interface (default: "uap")
|
|
uap_max_sta: Maximum number of STA for UAP/GO (default 0, max 10)
|
|
max_wfd_bss: Maximum number of WIFIDIRECT BSS (default 1, max 1)
|
|
wfd_name: Name of the WIFIDIRECT interface (default: "wfd")
|
|
max_vir_bss: Number of Virtual interfaces (default 0)
|
|
nan_name: Name of the NAN interface (default: "nan")
|
|
max_nan_bss: Number of NAN interfaces (default 1)
|
|
For example, to install PCIE8897 driver,
|
|
insmod mlan.ko
|
|
insmod pcie8897.ko [drv_mode=3] [fw_name=mrvl/pcie8897_uapsta.bin]
|
|
To load driver in STA only mode,
|
|
insmod mlan.ko
|
|
insmod pcie8897.ko drv_mode=1 [fw_name=mrvl/pcie8897_uapsta.bin]
|
|
To load driver in uAP only mode,
|
|
insmod mlan.ko
|
|
insmod pcie8897.ko drv_mode=2 [fw_name=mrvl/pcie8897_uapsta.bin]
|
|
|
|
To switch mode between STA only, uAP only and uAPSTA in run time,
|
|
echo drv_mode=1 > /proc/mwlan/config // STA mode
|
|
echo drv_mode=2 > /proc/mwlan/config // uAP mode
|
|
echo drv_mode=3 > /proc/mwlan/config // uAPSTA mode
|
|
c) Uninstall WLAN driver,
|
|
ifconfig mlanX down
|
|
ifconfig uapX down
|
|
rmmod pcie8xxx
|
|
rmmod mlan
|
|
|
|
Use mfg_mode = 1:
|
|
To load driver with MFG firmware file, when insmod WLAN driver and specify MFG firmware name if needed.
|
|
This option loads default normal FW on HW reset (reset button is pressed on the board).
|
|
|
|
Use mfg_mode = 2:
|
|
To load driver with MFG firmware file, when insmod WLAN driver and specify MFG firmware name if needed.
|
|
This option reloads previously specifed MFG firmware only on HW reset.
|
|
|
|
There are some other parameters for debugging purpose etc. Use modinfo to check details.
|
|
drvdbg=<bit mask of driver debug message control>
|
|
dev_cap_mask=<Bit mask of the device capability>
|
|
mac_addr=xx:xx:xx:xx:xx:xx <override the MAC address (in hex)>
|
|
auto_ds=0|1|2 <use MLAN default | enable auto deepsleep | disable auto deepsleep>
|
|
ps_mode=0|1|2 <use MLAN default | enable IEEE PS mode | disable IEEE PS mode>
|
|
p2p_enh=0|1 <Disable enhanced P2P (default) | Enable enhanced P2P>
|
|
max_tx_buf=2048|4096|8192 <maximum AMSDU Tx buffer size>
|
|
cfg_11d=0|1|2 <use MLAN default | enable 11d | disable 11d>
|
|
dts_enable=0|1 <Disable DTS | Enable DTS (default)>
|
|
hw_test=0|1 <Disable hardware test (default) | Enable hardware test>
|
|
fw_serial=0|1 <support parallel download FW | support serial download FW (default)>
|
|
req_fw_nowait=0|1 <use request_firmware API (default) | use request_firmware_nowait API>
|
|
init_cfg=<init config (MAC addresses, registers etc.) file name>
|
|
e.g. copy init_cfg.conf to firmware directory, init_cfg=mrvl/init_cfg.conf
|
|
cal_data_cfg=<CAL data config file name>
|
|
e.g. copy cal_data.conf to firmware directory, cal_data_cfg=mrvl/cal_data.conf
|
|
txpwrlimit_cfg=<Tx power limit config file name>
|
|
e.g. copy txpwrlimit_cfg_set.conf to firmware directory, txpwrlimit_cfg=mrvl/txpwrlimit_cfg_set.conf
|
|
init_hostcmd_cfg=<init hostcmd config file name>
|
|
e.g. copy init_hostcmd_cfg.conf to firmware directory, init_hostcmd_cfg=mrvl/init_hostcmd_cfg.conf
|
|
cfg80211_wext=<bit mask of CFG80211 and WEXT control>
|
|
Bit 0: STA WEXT
|
|
Bit 1: uAP WEXT
|
|
Bit 2: STA CFG80211
|
|
Bit 3: uAP CFG80211
|
|
cfg80211_drcs=1|0 <Enable DRCS support | Disable DRCS support (default)>
|
|
reg_alpha2=<Regulatory alpha2 (default NULL)>
|
|
wq_sched_prio: Priority for work queue
|
|
wq_sched_policy: Scheduling policy for work queue
|
|
(0: SCHED_NORMAL, 1: SCHED_FIFO, 2: SCHED_RR, 3: SCHED_BATCH, 5: SCHED_IDLE)
|
|
Please note that, both wq_sched_prio and wq_sched_policy should be provided
|
|
as module parameters. If wq_sched_policy is (0, 3 or 5), then wq_sched_prio
|
|
must be 0. wq_sched_prio should be 1 to 99 otherwise.
|
|
rx_work=0|1|2 <default | Enable rx_work_queue | Disable rx_work_queue>
|
|
indrstcfg=<2-byte IR configuration>
|
|
gpio pin (high byte): GPIO pin no to be used as trigger for out band reset
|
|
(0xFF: default pin configuration)
|
|
ir_mode (low byte) : independent reset mode
|
|
(0: disable, 1: enable out band, 2: enable in band)
|
|
For example, to enable out band reset via gpio_pin 14
|
|
indrstcfg=0x0e01
|
|
To enable out band reset via default gpio_pin
|
|
indrstcfg=0xff01
|
|
To enable in band reset and disable out band reset
|
|
indrstcfg=0x02
|
|
|
|
Note: On some platforms (e.g. PXA910/920) double quotation marks ("") need to used
|
|
for module parameters.
|
|
insmod sd8xxx.ko "<para1> <para2> ..."
|
|
|
|
3) FOR DRIVER PROC & DEBUG
|
|
|
|
The following info are provided in /proc/net/mwlan/mlanX/info,
|
|
on kernel 2.6.24 or later, the entry is /proc/mwlan/mlanX/info.
|
|
|
|
driver_name = "wlan"
|
|
driver_version = <chip id, firmware version and driver version>
|
|
interface_name = "mlanX"
|
|
bss_mode = "Ad-hoc" | "Managed" | "Auto" | "Unknown"
|
|
media_state = "Disconnected" | "Connected"
|
|
mac_address = <6-byte adapter MAC address>
|
|
multicase_count = <multicast address count>
|
|
essid = <current SSID>
|
|
bssid = <current BSSID>
|
|
channel = <current channel>
|
|
region_code = <current region code>
|
|
multicast_address[n] = <multicast address>
|
|
num_tx_bytes = <number of bytes sent to device>
|
|
num_rx_bytes = <number of bytes received from device and sent to kernel>
|
|
num_tx_pkts = <number of packets sent to device>
|
|
num_rx_pkts = <number of packets received from device and sent to kernel>
|
|
num_tx_pkts_dropped = <number of Tx packets dropped by driver>
|
|
num_rx_pkts_dropped = <number of Rx packets dropped by driver>
|
|
num_tx_pkts_err = <number of Tx packets failed to send to device>
|
|
num_rx_pkts_err = <number of Rx packets failed to receive from device>
|
|
carrier "on" | "off"
|
|
tx queue "stopped" | "started"
|
|
|
|
The following debug info are provided in /proc/net/mwlan/mlanX/debug,
|
|
on kernel 2.6.24 or later, the entry is /proc/mwlan/mlanX/debug.
|
|
|
|
drvdbg = <bit mask of driver debug message control>
|
|
wmm_ac_vo = <number of packets sent to device from WMM AcVo queue>
|
|
wmm_ac_vi = <number of packets sent to device from WMM AcVi queue>
|
|
wmm_ac_be = <number of packets sent to device from WMM AcBE queue>
|
|
wmm_ac_bk = <number of packets sent to device from WMM AcBK queue>
|
|
max_tx_buf_size = <maximum Tx buffer size>
|
|
tx_buf_size = <current Tx buffer size>
|
|
curr_tx_buf_size = <current Tx buffer size in FW>
|
|
ps_mode = <0/1, CAM mode/PS mode>
|
|
ps_state = <0/1/2/3, awake state/pre-sleep state/sleep-confirm state/sleep state>
|
|
is_deep_sleep = <0/1, not deep sleep state/deep sleep state>
|
|
wakeup_dev_req = <0/1, wakeup device not required/required>
|
|
wakeup_tries = <wakeup device count, cleared when device awake>
|
|
hs_configured = <0/1, host sleep not configured/configured>
|
|
hs_activated = <0/1, extended host sleep not activated/activated>
|
|
tx_pkts_queued = <number of Tx packets queued>
|
|
pps_uapsd_mode = <0/1, PPS/UAPSD mode disabled/enabled>
|
|
sleep_pd = <sleep period in milliseconds>
|
|
qos_cfg = <WMM QoS info>
|
|
tx_lock_flag = <0/1, Tx lock flag>
|
|
port_open = <0/1, port open flag>
|
|
scan_processing = <0/1, scan processing flag>
|
|
num_tx_timeout = <number of Tx timeout>
|
|
num_cmd_timeout = <number of timeout commands>
|
|
timeout_cmd_id = <command id of the last timeout command>
|
|
timeout_cmd_act = <command action of the last timeout command>
|
|
last_cmd_id = <command id of the last several commands sent to device>
|
|
last_cmd_act = <command action of the last several commands sent to device>
|
|
last_cmd_index = <0 based last command index>
|
|
last_cmd_resp_id = <command id of the last several command responses received from device>
|
|
last_cmd_resp_index = <0 based last command response index>
|
|
last_event = <event id of the last several events received from device>
|
|
last_event_index = <0 based last event index>
|
|
num_cmd_h2c_fail = <number of commands failed to send to device>
|
|
num_cmd_sleep_cfm_fail = <number of sleep confirm failed to send to device>
|
|
num_tx_h2c_fail = <number of data packets failed to send to device>
|
|
num_evt_deauth = <number of deauthenticated events received from device>
|
|
num_evt_disassoc = <number of disassociated events received from device>
|
|
num_evt_link_lost = <number of link lost events received from device>
|
|
num_cmd_deauth = <number of deauthenticate commands sent to device>
|
|
num_cmd_assoc_ok = <number of associate commands with success return>
|
|
num_cmd_assoc_fail = <number of associate commands with failure return>
|
|
cmd_sent = <0/1, send command resources available/sending command to device>
|
|
data_sent = <0/1, send data resources available/sending data to device>
|
|
txbd_rdptr = <PCIE transmit read pointer>
|
|
txbd_wrptr = <PCIE transmit write pointer>
|
|
rxbd_rdptr = <PCIE recieve read pointer>
|
|
rxbd_wrptr = <PCIE recieve write pointer>
|
|
eventbd_rdptr = <PCIE event read pointer>
|
|
eventbd_wrptr = <PCIE event write pointer>
|
|
cmd_resp_received = <0/1, no cmd response to process/response received and yet to process>
|
|
event_received = <0/1, no event to process/event received and yet to process>
|
|
ioctl_pending = <number of ioctl pending>
|
|
tx_pending = <number of Tx packet pending>
|
|
rx_pending = <number of Rx packet pending>
|
|
lock_count = <number of lock used>
|
|
malloc_count = <number of malloc done>
|
|
mbufalloc_count = <number of mlan_buffer allocated>
|
|
malloc_cons_count = <number of consistent malloc done>
|
|
main_state = <current state of the main process>
|
|
|
|
Use dmesg or cat /var/log/debug to check driver debug messages.
|
|
To log driver debug messages to file,
|
|
a) Edit /etc/syslog.conf, add one line "*.debug /var/log/debug"
|
|
on kernel 2.6.24 or later, edit /etc/rsyslog.conf instead
|
|
b) touch /var/log/debug (if the file doesn't exist)
|
|
c) service syslog restart
|
|
on kernel 2.6.24 or later, service rsyslog restart
|
|
|
|
Update /proc/sys/kernel/printk to change message log levels.
|
|
For example,
|
|
echo 6 > /proc/sys/kernel/printk (messages with a higher priority than 6
|
|
will be printed to the console)
|
|
echo 15 > /proc/sys/kernel/printk (all messages will be printed to console)
|
|
|
|
4) FOR IWPRIV COMMAND
|
|
|
|
NAME
|
|
This manual describes the usage of private commands used in Marvell MLAN
|
|
Linux Driver.
|
|
|
|
To use parameters as hex format, a '0x' must precede it for the parameters to
|
|
be parsed properly.
|
|
|
|
SYNOPSIS
|
|
iwpriv <mlanX> <command> [sub-command] ...
|
|
|
|
iwpriv mlanX version
|
|
iwpriv mlanX verext
|
|
iwpriv mlanX getsignal [m] [n]
|
|
iwpriv mlanX antcfg [m] [n]
|
|
iwpriv mlanX regioncode [n]
|
|
iwpriv mlanX cfpcode [m] [n]
|
|
iwpriv mlanX wwscfg [m]
|
|
iwpriv mlanX esuppmode
|
|
iwpriv mlanX passphrase <ssid/psk/passphrase>
|
|
iwpriv mlanX httxcfg [<m>] [<n>]
|
|
iwpriv mlanX htcapinfo [<m>] [<n>]
|
|
iwpriv mlanX addbapara <m> <n> <o> <p> <q>
|
|
iwpriv mlanX aggrpriotbl <n>
|
|
iwpriv mlanX addbareject <n>
|
|
iwpriv mlanX txbufcfg
|
|
iwpriv mlanX amsduaggrctrl <n>
|
|
iwpriv mlanX httxbfcap [cap]
|
|
iwpriv mlanX httxbfcfg "<action>[;GlobalData/tsData/interval/txPeerData/snrData]"
|
|
iwpriv mlanX deepsleep [n] [m]
|
|
iwpriv mlanX hscfg [condition [[GPIO# [gap]]]]
|
|
iwpriv mlanX hssetpara condition [GPIO# [gap]]
|
|
iwpriv mlanX deauth [n]
|
|
iwpriv mlanX radioctrl
|
|
iwpriv mlanX reassoctrl [n]
|
|
iwpriv mlanX bandcfg [l] [m] [n]
|
|
iwpriv mlanX getlog
|
|
iwpriv mlanX 11dcfg
|
|
iwpriv mlanX 11dclrtbl
|
|
iwpriv mlanX wmmcfg [n]
|
|
iwpriv mlanX txpowercfg [<RateIndex> [<MinPwr> [<MaxPwr> <step>]]]
|
|
iwpriv mlanX qoscfg
|
|
iwpriv mlanX getdatarate
|
|
iwpriv mlanX txratecfg [n]
|
|
iwpriv mlanX bcninterval [n]
|
|
iwpriv mlanX sysclock [clk1] [clk2] [clk3] [clk4]
|
|
iwpriv mlanX drvdbg [n]
|
|
iwpriv mlanX mgmtframectrl
|
|
iwpriv mlanX warmreset
|
|
iwpriv mlanX regrdwr <type> <offset> [value]
|
|
iwpriv mlanX rdeeprom <offset> <length>
|
|
iwpriv mlanX memrdwr <address> [value]
|
|
iwpriv mlanX inactivityto <n> <m> <l> [k]
|
|
iwpriv mlanX scancfg [t] [m] [p] [s] [a] [b] [ext]
|
|
iwpriv mlanX sleeppd [n]
|
|
iwpriv mlanX pscfg [k] [d] [l] ...
|
|
iwpriv mlanX fwwakeupmethod [n] [g]
|
|
iwpriv mlanX associate "<bssid> <ssid>"
|
|
iwpriv mlanX sleepparams [<p1> <p2> <p3> <p4> <p5> <p6>]
|
|
iwpriv mlanX netmon [<act> [<filter> <band> <chan> [offset]]]
|
|
iwpriv mlanX authtype [n]
|
|
iwpriv mlanX powercons [n]
|
|
iwpriv mlanX htstreamcfg [n]
|
|
iwpriv mlanX ipaddr ["<op>;<ipaddr>"]
|
|
iwpriv mlanX macctrl [n]
|
|
iwpriv mlanX dfstesting [<user_cac_pd> <user_nop_pd> <no_chan_change> <fixed_chan_num>]
|
|
iwpriv mlanX indrstcfg <ir_mode> [gpio_pin]
|
|
|
|
DESCRIPTION
|
|
Those commands are used to send additional commands to the Marvell MLAN
|
|
card via the Linux device driver.
|
|
|
|
The mlanX parameter specifies the network device that is to be used to
|
|
perform this command on. It could be mlan0, mlan1 etc.
|
|
|
|
version
|
|
This is used to get the current version of the driver and the firmware.
|
|
|
|
verext
|
|
Retrieve and display an extended version string from the firmware
|
|
|
|
Usage:
|
|
iwpriv mlanX verext [#]
|
|
|
|
where [#] is an optional argument to retrieve a specific version string,
|
|
omission of the argument retrieves the 0 indexed string.
|
|
|
|
getsignal
|
|
This command gets the last and average value of RSSI, SNR and NF of
|
|
Beacon and Data.
|
|
Note: This command is available only when STA is connected.
|
|
|
|
where value of m is:
|
|
1 -- RSSI (Receive Signal Strength Indication)
|
|
2 -- SNR (Signal to Noise Ratio)
|
|
3 -- NF (Noise Floor)
|
|
where value of n is:
|
|
1 -- Beacon last
|
|
2 -- Beacon average
|
|
3 -- Data last
|
|
4 -- Data average
|
|
|
|
Examples:
|
|
iwpriv mlan0 getsignal 1 : Get the RSSI info (beacon last, beacon
|
|
average, data last and data average)
|
|
iwpriv mlan0 getsignal 3 4 : Get the NF of data average
|
|
iwpriv mlan0 getsignal 2 1 : Get the SNR of beacon last
|
|
iwpriv mlan0 getsignal : Get all of the signal info
|
|
mlan0 getsignal:-32 -33 -35 -36 67 59 63 56 -99 -92 -98 -92
|
|
RSSI info: beacon last -32, beacon average -33, data last -35, data average -36
|
|
SNR info: beacon last 67, beacon average 59, data last 63, data average 56
|
|
NF info: beacon last -99, beacon average -92, data last -98, data average -92
|
|
|
|
antcfg
|
|
This command is used to set/get the mode of Tx/Rx path.
|
|
|
|
where value of m is:
|
|
Bit 0 -- Tx Path A
|
|
Bit 1 -- Tx Path B
|
|
Bit 0-1 -- Tx Path A+B
|
|
|
|
where value of n is:
|
|
Bit 0 -- Rx Path A
|
|
Bit 1 -- Rx Path B
|
|
Bit 0-1 -- Rx Path A+B
|
|
The Tx path setting (m) is used if Rx path (n) is not provided.
|
|
|
|
Examples:
|
|
iwpriv mlan0 antcfg : Get Tx and Rx path
|
|
iwpriv mlan0 antcfg 3 : Set Tx and Rx path to A+B
|
|
iwpriv mlan0 antcfg 1 3 : Set Tx path to A and Rx path to A+B
|
|
|
|
regioncode
|
|
This command is used to set/get the region code in the station.
|
|
Note: This command should be issued at beginning before band/channel selection
|
|
and association.
|
|
|
|
where value is 'region code' for various regions like
|
|
USA FCC, Canada IC, Europe ETSI, Japan ...
|
|
The special code (0xff) is used for Japan to support channel 1-14 in B/G/N mode.
|
|
|
|
Examples:
|
|
iwpriv mlan0 regioncode : Get region code
|
|
iwpriv mlan0 regioncode 0x10 : Set region code to USA (0x10)
|
|
|
|
Note : in some case regioncode will be 0 after updated countycode or 80211d
|
|
i.e. mlanutl mlanX countrycode (CA, JP, CN, DE, ES AT, BR, RU)
|
|
or uaputl.exe sys_cfg_80211d state 1 country (CA, JP, CN, DE, ES AT, BR, RU)
|
|
Please use cfp instead of it.
|
|
|
|
cfpcode
|
|
This command is used to set/get the Channel-Frequency-Power table codes.
|
|
The region table can be selected through region code.
|
|
The current configuration is returned if no parameter provided.
|
|
|
|
where the parameters are,
|
|
[m]: code of the CFP table for 2.4GHz (0: unchanged)
|
|
[n]: code of the CFP table for 5GHz (0 or not provided: unchanged)
|
|
|
|
Examples:
|
|
iwpriv mlan0 cfpcode : Get current configuration
|
|
iwpriv mlan0 cfpcode 0x30 : Set 2.4GHz CFP table code 0x30 (EU),
|
|
keep 5GHz table unchanged
|
|
iwpriv mlan0 cfpcode 0x10 5 : Set 2.4GHz CFP table code 0x10 (USA)
|
|
and 5GHz table code 5
|
|
|
|
wwscfg
|
|
This command is used to set/get the WWS (World Wide Safe) mode.
|
|
|
|
where value of m is:
|
|
0 -- Disable WWS mode (default)
|
|
1 -- Enable WWS mode
|
|
|
|
Examples:
|
|
iwpriv mlan0 wwscfg : Get WWS mode
|
|
iwpriv mlan0 wwscfg 1 : Enable WWS mode
|
|
iwpriv mlan0 wwscfg 0 : Disable WWS mode
|
|
|
|
esuppmode
|
|
This command is used to get the current RSN mode and active pairwise/group
|
|
cipher for WPA/WPA2 mode.
|
|
Note: This command is available only when STA is connected.
|
|
|
|
These are bits settings used to indicate each RSN mode.
|
|
Bit 0 : No RSN
|
|
Bit 1-2 : RFU
|
|
Bit 3 : WPA
|
|
Bit 4 : WPA-NONE
|
|
Bit 5 : WPA2
|
|
Bit 6 : AES
|
|
Bit 7-15 : RFU
|
|
|
|
These are bits settings used to indicate each pairwise and group cipher.
|
|
Bit 0 : RFU
|
|
Bit 1 : RFU
|
|
Bit 2 : TKIP
|
|
Bit 3 : AES
|
|
Bit 2-7 : RFU
|
|
|
|
Example:
|
|
iwpriv mlan0 esuppmode : Get RSN mode and pairwise/group cipher
|
|
8 4 4
|
|
(The current RSN mode is WPA, active pairwise cipher is TKIP and
|
|
active group cipher is TKIP.)
|
|
|
|
passphrase
|
|
This command is used to set/get passphrase for WPA-PSK/WPA2-PSK mode.
|
|
|
|
Where <n>
|
|
ASCII string for ssid/passphrase/psk.
|
|
|
|
1) "0;<ssid=valid ssid>" - This will get the passphrase, AKMP
|
|
for specified ssid, if none specified then it will get all.
|
|
|
|
Example:
|
|
iwpriv mlan0 passphrase "0;ssid=marvell"
|
|
|
|
2) "1;<psk=64 byte hexpsk>;<passphrase=1-63 byte passphare>
|
|
<ssid=valid ssid>" - Passphrase and psk cannot be provided for the same SSID.
|
|
This command takes only one SSID at a time, If ssid= is present it should contain
|
|
a passphrase or psk. If no arguments are provided then AKMP=802.1x, and passphrase
|
|
should be provided after association.
|
|
End of each parameter should be followed by a ';'(except for the last parameter)
|
|
as the delimiter. If ';' or '/' has to be used in an SSID then a '/' should be preceded
|
|
to ';' or '/' as a escape.
|
|
|
|
Examples:
|
|
iwpriv mlan0 passphrase "1;ssid=mrvlAP;passphrase=abcdefgd"
|
|
iwpriv mlan0 passphrase "1;ssid=mrvl AP;psk=<64 bytes hexpsk>"
|
|
|
|
If user wants to input the ssid as "mrvl; AP" then command has to be
|
|
iwpriv mlan0 passphrase "1;ssid=mrvl/; AP;passphrase=abcdefgh"
|
|
|
|
If user wants to input the ssid as "//;" then command has to be
|
|
iwpriv mlan0 passphrase "1;ssid=/////;;passphrase=abcdefgh"
|
|
|
|
3) "2;<ssid=valid ssid>" - This will clear the passphrase
|
|
for specified ssid, if none specified then it will clear all.
|
|
|
|
Examples:
|
|
iwpriv mlan0 passphrase "2;ssid=marvell"
|
|
iwpriv mlan0 passphrase "2" : Clear all profiles and disable embedded supplicant
|
|
|
|
httxcfg
|
|
This command is used to configure various 11n specific configuration
|
|
for transmit (such as Short GI, Channel BW and Green field support)
|
|
|
|
where <m> is <txcfg>
|
|
This is a bitmap and should be used as following
|
|
Bit 15-8: Reserved set to 0
|
|
Bit 7: STBC enable/disable
|
|
Bit 6: Short GI in 40 Mhz enable/disable
|
|
Bit 5: Short GI in 20 Mhz enable/disable
|
|
Bit 4: Green field enable/disable
|
|
Bit 3-2: Reserved set to 1
|
|
Bit 1: 20/40 Mhz enable disable.
|
|
Bit 0: LDPC enable/disable
|
|
|
|
When Bit 1 is set then firmware could transmit in 20Mhz or 40Mhz based
|
|
on rate adaptation. When this bit is reset then firmware will only
|
|
transmit in 20Mhz.
|
|
|
|
where <n> is <band>
|
|
<band> - This is the band info for <txcfg> settings.
|
|
0: Settings for both 2.4G and 5G bands
|
|
1: Settings for 2.4G band
|
|
2: Settings for 5G band
|
|
|
|
Examples:
|
|
iwpriv mlanX httxcfg
|
|
This will display HT Tx configuration.
|
|
If the configurations for 2.4G and 5G are different,
|
|
the first value is for 2.4G and the second value is for 5G.
|
|
Otherwise, it will display a single value for both bands.
|
|
|
|
iwpriv mlanX httxcfg 0x62
|
|
This will enable 20/40 and Short GI but will disable Green field for 2.4G and 5G band.
|
|
|
|
iwpriv mlanX httxcfg 0x30 1
|
|
This will enable Short GI 20 Mhz and Green field for 2.4G band.
|
|
|
|
The default value is 0x20 for 2.4G and 0x62 for 5G.
|
|
|
|
Note:- If 20/40 MHz support is disabled in htcapinfo, device will not transmit
|
|
in 40 MHz even 20/40 MHz is enabled in httxcfg.
|
|
|
|
htcapinfo
|
|
This command is used to configure some of parameters in HTCapInfo IE
|
|
(such as Short GI, Channel BW, and Green field support)
|
|
|
|
where <m> is <capinfo>
|
|
<capinfo> - This is a bitmap and should be used as following
|
|
Bit 29: Green field enable/disable
|
|
Bit 26: Rx STBC Support enable/disable. (As we support
|
|
single spatial stream only 1 bit is used for Rx STBC)
|
|
Bit 24: Short GI in 40 Mhz enable/disable
|
|
Bit 23: Short GI in 20 Mhz enable/disable
|
|
Bit 17: 20/40 Mhz enable disable.
|
|
Bit 8: Enable/disable 40Mhz Intolarent bit in ht capinfo.
|
|
0 will reset this bit and 1 will set this bit in
|
|
htcapinfo attached in assoc request.
|
|
All others are reserved and should be set to 0.
|
|
|
|
Setting of any other bits will return error.
|
|
|
|
where <n> is <band>
|
|
<band> - This is the band info for <capinfo> settings.
|
|
0: Settings for both 2.4G and 5G bands
|
|
1: Settings for 2.4G band
|
|
2: Settings for 5G band
|
|
|
|
Examples:
|
|
iwpriv mlanX htcapinfo
|
|
This will display HT capabilties information.
|
|
If the information for 2.4G and 5G is different,
|
|
the first value is for 2.4G and the second value is for 5G.
|
|
Otherwise, it will display a single value for both bands.
|
|
|
|
iwpriv mlanX htcapinfo 0x1820000
|
|
This will enable Short GI, Channel BW to 20/40 and disable Green field support for 2.4G and 5G band.
|
|
|
|
iwpriv mlanX htcapinfo 0x800000 2
|
|
This will enable Short GI, Channel BW to 20 only, No Rx STBC support and disable Green field support for 5G band.
|
|
|
|
The default value is 0x4800000 for 2.4G and 0x5820000 for 5G.
|
|
|
|
Note:- This command can be issued any time but it will only come to effect from
|
|
next association. (as HTCapInfo is sent only during Association).
|
|
|
|
addbapara
|
|
This command can be used to update the default ADDBA parameters.
|
|
|
|
where <m> is <timeout>
|
|
<timeout> - This is the block ack timeout for ADDBA request.
|
|
0 : Disable (recommended for throughput test)
|
|
1 - 65535 : Block Ack Timeout in TU
|
|
|
|
where <n> is <txwinsize>
|
|
<txwinsize> - Window size for ADDBA request. (16 is recommended and default value)
|
|
|
|
where <o> is <rxwinsize>
|
|
<rxwinsize> - Window size for ADDBA response. (48 is recommended and 32 is default value)
|
|
(16 is recommended for IWNCOMM AP in WAPI throughput test)
|
|
|
|
Current window size limit for Tx as well as Rx is 1023.
|
|
|
|
where <p> is <txamsdu>
|
|
<txamsdu> - amsdu support for ADDBA request. (1 is default value)
|
|
0: disable amsdu in ADDBA request
|
|
1: enable amsdu in ADDBA request
|
|
|
|
where <q> is <rxamsdu>
|
|
<rxamsdu> - amsdu support for ADDBA response. (1 is default value)
|
|
0: disable amsdu in ADDBA response
|
|
1: enable amsdu in ADDBA response
|
|
|
|
eg:
|
|
iwpriv mlanX addbapara - This command will get the current addba params
|
|
iwpriv mlanX addbapara 1000 64 8 0 0 - This will change the ADDBA timeout to (1000 * 1024) us,
|
|
txwinsize to 64 and rxwinsize to 8 and disable amdsu in ADDBA request/response.
|
|
|
|
The default setting is 65535 16 32 1 1.
|
|
|
|
In case the ADDBA timeout value is updated then a ADDBA is sent for all streams
|
|
to update the timeout value.
|
|
|
|
In case txwinsize and/or rxwinsize is updated, the effect could only be seen on
|
|
next ADDBA request/response. The current streams will not be affected with this
|
|
change.
|
|
|
|
In case of txamsdu/rxamsdu is updated, the effect could only be seen on
|
|
next ADDBA request/response. The current streams will not be affected with this
|
|
change. AMSDU in AMPDU stream will be enabled when AP support this feature
|
|
and AMSDU is enabled in aggrpriotbl.
|
|
|
|
aggrpriotbl
|
|
This command is used set/get the priority table for AMPDU/AMSDU traffic per tid.
|
|
This command can also be used to disable AMPDU/AMSDU for a given tid.
|
|
In case of AMPDU this priority table will be used to setup block ack (to make
|
|
sure the highest priority tid always uses AMPDU as we have limited AMPDU streams)
|
|
|
|
where <m0> <n0> <m1> <n1> ... <m7> <n7>
|
|
|
|
<mx> - This is priority for Tid0 for AMPDU packet. A priority could be any
|
|
values between 0 - 7, 0xff to disable aggregation.
|
|
<nx> - This is priority for Tid0 for AMSDU packet. A priority could be any
|
|
values between 0 - 7, 0xff to disable aggregation.
|
|
|
|
eg:
|
|
iwpriv mlanX aggrpriotbl - This command will get the current Priority table for AMPDU and AMSDU.
|
|
<2 2 0 0 1 1 3 3 4 4 5 5 255 255 255 255>. This is read as
|
|
<"Prio for AMPDU for Tid0" "Prio for AMSDU for Tid0"
|
|
"Prio for AMPDU for Tid1" "Prio for AMSDU for Tid1" and so on
|
|
iwpriv mlanX aggrpriotbl 2 2 0 0 1 1 3 3 4 4 5 5 255 255 255 255 -
|
|
This will set the priority table for AMPDU and AMSDU
|
|
Priority for Tid0/AMPDU = 2, Tid0/AMSDU = 2, Tid1/AMPDU = 0, Tid1/AMSDU = 0
|
|
and so on. Aggregation for Tid6 and Tid7 are disabled.
|
|
Here higher the priority number, higher the priority (i.e. 7
|
|
has higher priority than 6). Similarly for AMSDU.
|
|
iwpriv mlanX aggrpriotbl 0xff 2 0xff 0 0xff 1 0xff 3 0xff 4 0xff 5 0xff 0xff 0xff 0xff - This will disable
|
|
AMPDU for all the TIDs but will still keep AMSDU enabled to Tid0 to Tid5
|
|
|
|
The default setting is 2 255 0 255 1 255 3 255 4 255 5 255 255 255 255 255.
|
|
|
|
A delBA should be seen in case a disable happens on a TID for which AMPDU stream
|
|
is currently setup.
|
|
|
|
Note:- This command should only be issue in disconnected state.
|
|
|
|
addbareject
|
|
This command is used set/get the addbareject table for all the TIDs.
|
|
This command can also be used to enable rejection of ADDBA requests for a given tid.
|
|
|
|
where <m0> <m1> ... <m7>
|
|
|
|
<mX> - This can be 0/1 for TidX. 1 enables rejection of ADDBA request for TidX and
|
|
0 would accept any ADDBAs for TidX.
|
|
|
|
eg:
|
|
iwpriv mlanX addbareject - This command will get the current table.
|
|
[0 0 0 0 0 0 0 0]. ADDBA would be accepted for all TIDs. This is the default state.
|
|
|
|
iwpriv mlanX addbareject 0 0 1 1 0 0 0 0 - This command will accept ADDBA requests for
|
|
Tid [0,1,4,5,6,7] and reject ADDBA requests for Tid [2,3]
|
|
|
|
iwpriv mlanX addbareject 1 1 1 1 1 1 1 1 - This will enable rejection of ADDBA requests for
|
|
all Tids.
|
|
|
|
Note:- This command should only be issue in disconnected state.
|
|
|
|
txbufcfg
|
|
This command can be used to get current buffer size.
|
|
|
|
eg:
|
|
iwpriv mlanX txbufcfg - This will display the current buffer size.
|
|
|
|
Note:- The actual tx buf size will depends on AP's capability and max transmit buffer size.
|
|
|
|
amsduaggrctrl
|
|
This command could be used to enable/disable a feature where firmware gives feedback to driver
|
|
regarding the optimal AMSDU buffer size to use with the current rate. Firmware will use the
|
|
current rate to decide the buffer size we could transmit. The max buffer size will still be
|
|
limited by buffer size provided in txbufcfg. (i.e. if the txbufcfg is 4K, then we could only transmit
|
|
4K/2K AMSDU packets, if the txbufcfg is 8K then we could transmit 8k/4k/2k based on current rate)
|
|
|
|
If enabled AMSDU buffer size at various rates will be as follows
|
|
|
|
1. Legacy B/G rate.
|
|
No AMSDU aggregation.
|
|
|
|
2. BW20 HT Rate:
|
|
When TX rate goes down,
|
|
MCS 7, 6, 5, 4:
|
|
a 8K aggregation size (if TX buffer size is 8K)
|
|
b 4K aggregation size (if TX buffer size is 4K)
|
|
c 2K aggregation size (if TX buffer size is 2K)
|
|
|
|
MCS 3, 2:
|
|
a 4K aggregation size (if TX buffer size is 8K/4K)
|
|
b 2K aggregation size (if TX buffer size is 2K)
|
|
|
|
MCS 1, 0:
|
|
a No aggregation
|
|
|
|
When TX rate goes up,
|
|
MCS 7, 6, 5:
|
|
a 8K aggregation size (if TX buffer size is 8K)
|
|
b 4K aggregation size (if TX buffer size is 4K)
|
|
c 2K aggregation size (if TX buffer size is 2K)
|
|
|
|
MCS 4, 3:
|
|
a 4K aggregation size (if TX buffer size is 8K/4K)
|
|
b 2K aggregation size (if TX buffer size is 2K)
|
|
|
|
MCS 2, 1, 0:
|
|
a No aggregation
|
|
|
|
3. BW40 HT Rate:
|
|
When TX rate goes down,
|
|
MCS 7, 6, 5, 4, 3, 2, 1:
|
|
a 8K aggregation size (if TX buffer size is 8K)
|
|
b 4K aggregation size (if TX buffer size is 4K)
|
|
c 2K aggregation size (if TX buffer size is 2K)
|
|
|
|
MCS 0:
|
|
a No aggregation
|
|
|
|
When TX rate goes up,
|
|
MCS 7, 6, 5, 4, 3:
|
|
a 8K aggregation size (if TX buffer size is 8K)
|
|
b 4K aggregation size (if TX buffer size is 4K)
|
|
c 2K aggregation size (if TX buffer size is 2K)
|
|
|
|
MCS 2, 1, 0:
|
|
a No aggregation
|
|
|
|
where <n> is 0/1 (for disable/enable)
|
|
|
|
eg:
|
|
iwpriv mlanx amsduaggrctrl 1 - Enable this feature
|
|
iwpriv mlanx amsduaggrctrl 0 - Disable this feature
|
|
iwpriv mlanx amsduaggrctrl - This will get the enable/disable flag
|
|
and the current AMSDU buffer size). The AMSDU buffer size returned is only
|
|
valid after association as before association there is no rate info.
|
|
|
|
Note:- This command to enable/disable could be given anytime (before/after
|
|
association). This feature is enabled by default by the driver during
|
|
initialization.
|
|
|
|
httxbfcap
|
|
This command is used to set/get the TX beamforming capabilities.
|
|
|
|
Usage:
|
|
iwpriv mlanX httxbfcap [cap]
|
|
|
|
where the parameters are,
|
|
cap: TX beamforming capabilities
|
|
Bit 0 : Implicit TX BF receiving capable
|
|
Bit 1 : RX staggered sounding capable
|
|
Bit 2 : TX staggered sounding capable
|
|
Bit 3 : RX NDP capable
|
|
Bit 4 : TX NDP capable
|
|
Bit 5 : Implicit TX BF capable
|
|
Bit 6-7 : Calibration
|
|
0: - not supported
|
|
1: - STA can respond to a calibration request using
|
|
the CSI Report, but cannot initiate calibration
|
|
2: - reserved
|
|
3: - STA can both initiate and respond to a calibration request
|
|
Bit 8 : Explicit CSI TX BF capable
|
|
Bit 9 : Explicit non-compressed steering capable
|
|
Bit 10 : Explicit compressed steering capable
|
|
Bit 11-12: Explicit TX BF CSI feedback
|
|
0: - not supported
|
|
1: - delayed feedback
|
|
2: - immediate feedback
|
|
3: - delayed and immediate feedback
|
|
Bit 13-14: Explicit non-compressed BF feedback capable
|
|
0: - not supported
|
|
1: - delayed feedback
|
|
2: - immediate feedback
|
|
3: - delayed and immediate feedback
|
|
Bit 15-16: Explicit compressed BF feedback capable
|
|
0: - not supported
|
|
1: - delayed feedback
|
|
2: - immediate feedback
|
|
3: - delayed and immediate feedback
|
|
Bit 17-18: Minimal grouping
|
|
0: - no grouping (STA supports groups of 1)
|
|
1: - groups of 1, 2
|
|
2: - groups of 1, 4
|
|
3: - groups of 1, 2, 4
|
|
Bit 19-20: CSI number of beamformer antennas supported
|
|
0: - single TX antenna sounding
|
|
1: - 2 TX antenna sounding
|
|
2: - 3 TX antenna sounding
|
|
3: - 4 TX antenna sounding
|
|
Bit 21-22: Non-compressed steering number of beamformer antennas supported
|
|
0: - single TX antenna sounding
|
|
1: - 2 TX antenna sounding
|
|
2: - 3 TX antenna sounding
|
|
3: - 4 TX antenna sounding
|
|
Bit 23-24: Compressed steering number of beamformer antennas supported
|
|
0: - single TX antenna sounding
|
|
1: - 2 TX antenna sounding
|
|
2: - 3 TX antenna sounding
|
|
3: - 4 TX antenna sounding
|
|
Bit 25-26: CSI max number of rows beamformer supported
|
|
0: - single row of CSI
|
|
1: - 2 rows of CSI
|
|
2: - 3 rows of CSI
|
|
3: - 4 rows of CSI
|
|
Bit 27-28: Channel estimation capability
|
|
0: - 1 space time stream
|
|
1: - 2 space time streams
|
|
2: - 3 space time streams
|
|
3: - 4 space time streams
|
|
Bit 29-31: Reserved
|
|
|
|
Examples:
|
|
iwpriv mlan0 httxbfcap : Get the current TX BF capabilities
|
|
iwpriv mlan0 httxbfcap 0x0000001F : Set the TX BF capabilities of the
|
|
Implicit TX BF receiving capable,
|
|
RX staggered sounding capable,
|
|
TX staggered sounding capable,
|
|
RX NDP capable and TX NDP capable
|
|
|
|
httxbfcfg
|
|
This command is used to configure the TX beamforming options.
|
|
Note: Any new subcommand should be inserted in the second
|
|
argument and each argument of the sub command should be
|
|
separated by semicolon. For global configuration, the
|
|
arguments should be separated by space.
|
|
|
|
Usage:
|
|
iwpriv mlanX httxbfcfg "<action>[;GlobalData/tsData/interval/txPeerData/snrData]"
|
|
|
|
where the parameters are,
|
|
action: TX beamforming action
|
|
0: Control global parameters for beamforming
|
|
1: Performs NDP Sounding for PEER
|
|
2: TX BF interval in milliseconds
|
|
3: Enable/Disable beamforming/sounding for a particular peer
|
|
4: TX BF SNR Threshold for peer
|
|
.. <for new subcommand>
|
|
GlobalData: Global parameter arguments.
|
|
It contains beamforming enable, sounding enable, FB type, snr_threshold
|
|
sounding interval, Beamformig mode values seperated by space.
|
|
Syntax:
|
|
iwpriv mlanX httxbfcfg <action>;<beamforming enable> <sounding enable> <FB type>
|
|
<snr_threshold> <sounding interval> <Beamforming mode>
|
|
tsData: Trigger sounding for PEER specific arguments,
|
|
it contains PEER MAC and status
|
|
interval: TX BF interval in milliseconds
|
|
txPeerData: Enable/Disable beamforming/sounding for the indicated peer,
|
|
it contains PEER MAC, sounding, beamfoming options and FB type;
|
|
snrData: TX BF SNR Threshold for peer, it contains PEER MAC and SNR
|
|
|
|
Examples:
|
|
iwpriv mlan0 httxbfcfg "0" : Get current global configuration parameter
|
|
iwpriv mlan0 httxbfcfg "2;00:50:43:20:BF:64" : Get the TX BF periodicity for a given peer
|
|
iwpriv mlan0 httxbfcfg "3" : Get the list of MAC addresses that have
|
|
beamforming and/or sounding enabled
|
|
iwpriv mlan0 httxbfcfg "4" : Get the list of PEER MAC, SNR tuples
|
|
programmed into the firmware.
|
|
iwpriv mlan0 httxbfcfg "0;0 0 3 10 500 5" : Disable beamforming, sounding, set FB type
|
|
to 3, snr threshold to 10, sounding interval
|
|
to 500 ms and beamforming mode to 5
|
|
iwpriv mlan0 httxbfcfg "1;00:50:43:20:BF:64" : Perform NDP Trigger sounding to peer
|
|
00:50:43:20:BF:64
|
|
iwpriv mlan0 httxbfcfg "2;00:50:43:20:BF:64;500" : Set TX BF periodicity for peer 00:50:43:20:BF:64
|
|
to 500 milliseconds
|
|
iwpriv mlan0 httxbfcfg "3;00:50:43:20:BF:43;1;0;3" : Enable beamforming, disable sounding and set
|
|
FB type to 3 for peer 00:50:43:20:BF:43
|
|
iwpriv mlan0 httxbfcfg "4;00:50:43:20:BF:24;43" : Set TX BF SNR threshold to peer
|
|
00:50:43:20:BF:24 with SNR 43
|
|
|
|
mgmtframectrl
|
|
This command is used to get/set mask for the management frames which needs to be forwarded to application layer.
|
|
|
|
Usage:
|
|
iwpriv mlanX mgmtframectrl [m]
|
|
|
|
where the parameter [m] is the bit mask of management frame reception.
|
|
Following are the bit definitions.
|
|
Bit 0 : Association Request
|
|
Bit 1 : Association Response
|
|
Bit 2 : Re-Association Request
|
|
Bit 3 : Re-Association Response
|
|
Bit 4 : Probe Request
|
|
Bit 5 : Probe Response
|
|
Bit 8 : Beacon Frames
|
|
|
|
Examples:
|
|
iwpriv mlan0 mgmtframectrl : Get the current Mgmt Frame forwarding mask
|
|
iwpriv mlan0 mgmtframectrl 0x0020 : Bit 5 is set, Forward probe response
|
|
frames to application layer
|
|
|
|
deepsleep
|
|
This command is used to set/get auto deep sleep mode.
|
|
|
|
Usage:
|
|
iwpriv mlanX deepsleep [n] [m]
|
|
|
|
where the parameters are:
|
|
[n]: Enable/disable auto deep sleep mode (1/0)
|
|
[m]: Idle time in milliseconds after which firmware will put the device
|
|
in deep sleep mode. Default value is 100 ms.
|
|
|
|
Examples:
|
|
iwpriv mlan0 deepsleep : Display auto deep sleep mode
|
|
iwpriv mlan0 deepsleep 1 : Enable auto deep sleep mode, idle time unchanged
|
|
iwpriv mlan0 deepsleep 0 : Disable auto deep sleep mode
|
|
iwpriv mlan0 deepsleep 1 500 : Enable auto deep sleep mode with idle time 500 ms
|
|
Note:
|
|
Deepsleep must be disabled before changing idle time.
|
|
|
|
hscfg
|
|
This command is used to configure the host sleep parameters.
|
|
|
|
Usage:
|
|
iwpriv mlanX hscfg [condition [[GPIO# [gap]]]]
|
|
|
|
This command takes one (condition), two (condition and GPIO#) or three
|
|
(condition, GPIO# and gap) parameters for set. If no parameter provided,
|
|
get is performed.
|
|
|
|
where Condition is:
|
|
bit 0 = 1 -- broadcast data
|
|
bit 1 = 1 -- unicast data
|
|
bit 2 = 1 -- mac event
|
|
bit 3 = 1 -- multicast data
|
|
bit 6 = 1 -- Wakeup when mgmt frame received.
|
|
bit 7 = 1 -- Reserved
|
|
bit 8 = 1 -- Disable non maskable data wakeup.
|
|
|
|
The host sleep mode will be canceled if condition is set to -1. The default is 0x7.
|
|
|
|
where GPIO is the pin number of GPIO used to wakeup the host. It could be any valid
|
|
GPIO pin# (e.g. 0-7) or 0xff (interface, e.g. SDIO will be used instead).
|
|
The default is 0xff.
|
|
|
|
where Gap is the gap in milliseconds between wakeup signal and wakeup event or 0xff
|
|
for special setting (host acknowledge required) when GPIO is used to wakeup host.
|
|
The default is 200.
|
|
|
|
The host sleep set except for cancellation will be blocked if host sleep is
|
|
already activated.
|
|
|
|
Examples:
|
|
iwpriv mlan0 hscfg : Get current host sleep mode
|
|
iwpriv mlan0 hscfg -1 : Cancel host sleep mode
|
|
iwpriv mlan0 hscfg 3 : Broadcast and unicast data
|
|
Use GPIO and gap set previously
|
|
iwpriv mlan0 hscfg 2 3 : Unicast data
|
|
Use GPIO 3 and gap set previously
|
|
iwpriv mlan0 hscfg 2 1 0xa0 : Unicast data
|
|
Use GPIO 1 and gap 160 ms
|
|
iwpriv mlan0 hscfg 2 0xff : Unicast data
|
|
Use interface (e.g. SDIO)
|
|
Use gap set previously
|
|
iwpriv mlan0 hscfg 4 3 0xff : MAC event
|
|
Use GPIO 3
|
|
Special host sleep mode
|
|
iwpriv mlan0 hscfg 1 0xff 0xff : Broadcast data
|
|
Use interface (e.g. SDIO)
|
|
Use gap 255ms
|
|
|
|
hssetpara
|
|
This command is used to set host sleep parameters.
|
|
|
|
Usage:
|
|
iwpriv mlanX hssetpara Condition [GPIO# [gap]]
|
|
|
|
Note:
|
|
1) The usages of parameters are the same as "hscfg" command.
|
|
2) The parameters will be saved in the driver and be used when host suspends.
|
|
|
|
deauth
|
|
This command is used to send a de-authentication to an arbitrary AP.
|
|
If [n] is omitted, the driver will deauth the associated AP.
|
|
If in ad-hoc mode this command is used to stop beacon transmission
|
|
from the station and go into idle state.
|
|
|
|
When <n> is supplied as a MAC address, the driver will deauth the
|
|
specified AP. If the AP address matches the driver's associated AP,
|
|
the driver will disconnect. Otherwise, the driver remains connected.
|
|
|
|
radioctrl
|
|
This command is used to turn on/off the radio.
|
|
Note: The radio can be disabled only in disconnected state.
|
|
|
|
where value of n is:
|
|
0 -- Disable
|
|
1 -- Enable
|
|
|
|
Examples:
|
|
iwpriv mlan0 radioctrl 1 : Turn the radio on
|
|
iwpriv mlan0 radioctrl : Get radio status
|
|
|
|
reassoctrl
|
|
This command is used to turn on/off re-association in driver.
|
|
|
|
Usage:
|
|
iwpriv mlanX reassoctrl [n]
|
|
|
|
Where value of n is:
|
|
0 -- Disable
|
|
1 -- Enable
|
|
|
|
Examples:
|
|
iwpriv mlan0 reassoctrl : Get re-association status
|
|
iwpriv mlan0 reassoctrl 1 : Turn re-association on
|
|
|
|
bandcfg
|
|
This command is used to set/get infra/ad-hoc band.
|
|
Note: This command is only available in disconnected state.
|
|
|
|
Usage:
|
|
iwpriv mlanX bandcfg [l] [m] [n]
|
|
|
|
where the parameters:
|
|
[l]: Infrastructure band
|
|
bit 0: B
|
|
bit 1: G
|
|
bit 2: A
|
|
bit 3: GN
|
|
bit 4: AN
|
|
|
|
bit 5: AC 2.4G
|
|
bit 6: AC 5G
|
|
[m]: Ad-hoc start band
|
|
bit 0: B
|
|
bit 1: G
|
|
bit 2: A
|
|
[n]: Ad-hoc start channel
|
|
Examples:
|
|
iwpriv mlan0 bandcfg : Get infra/ad-hoc band and ad-hoc
|
|
start channel configurations
|
|
iwpriv mlan0 bandcfg 1 : Set infra band to B only
|
|
iwpriv mlan0 bandcfg 3 2 6 : Set infra band to B/G, ad-hoc start band
|
|
to G and ad-hoc start channel to 6
|
|
|
|
getlog
|
|
This command is used to get the statistics available in the station.
|
|
|
|
11dcfg
|
|
This command is used to control 11D. No argument is used to get.
|
|
|
|
where value of n is:
|
|
0 -- Disable
|
|
1 -- Enable
|
|
|
|
Examples:
|
|
iwpriv mlan0 11dcfg 1 : Enable 11D
|
|
iwpriv mlan0 11dcfg : Get 11D status
|
|
|
|
11dclrtbl
|
|
This command is used to clear the 11D channel table.
|
|
|
|
Usage:
|
|
iwpriv mlanX 11dclrtbl
|
|
|
|
wmmcfg
|
|
This command is used to control WMM. No argument is used to get.
|
|
|
|
where value of n is:
|
|
0 -- Disable
|
|
1 -- Enable
|
|
|
|
Examples:
|
|
iwpriv mlan0 wmmcfg 1 : Enable WMM
|
|
iwpriv mlan0 wmmcfg : Get WMM status
|
|
|
|
txpowercfg
|
|
This command is used to get/set the Tx power configuration.
|
|
|
|
Where
|
|
<RateIndex> - Data rate index
|
|
0 1 Mbps
|
|
1 2 Mbps
|
|
2 5.5 Mbps
|
|
3 11 Mbps
|
|
4 6 Mbps
|
|
5 9 Mbps
|
|
6 12 Mbps
|
|
7 18 Mbps
|
|
8 24 Mbps
|
|
9 36 Mbps
|
|
10 48 Mbps
|
|
11 54 Mbps
|
|
12 MCS0 (BW20)
|
|
13 MCS1 (BW20)
|
|
14 MCS2 (BW20)
|
|
15 MCS3 (BW20)
|
|
16 MCS4 (BW20)
|
|
17 MCS5 (BW20)
|
|
18 MCS6 (BW20)
|
|
19 MCS7 (BW20)
|
|
20 MCS8 (BW20)
|
|
21 MCS9 (BW20)
|
|
22 MCS10 (BW20)
|
|
23 MCS11 (BW20)
|
|
24 MCS12 (BW20)
|
|
25 MCS13 (BW20)
|
|
26 MCS14 (BW20)
|
|
27 MCS15 (BW20)
|
|
140 MCS0 (BW40)
|
|
141 MCS1 (BW40)
|
|
142 MCS2 (BW40)
|
|
143 MCS3 (BW40)
|
|
144 MCS4 (BW40)
|
|
145 MCS5 (BW40)
|
|
146 MCS6 (BW40)
|
|
147 MCS7 (BW40)
|
|
148 MCS0 (BW40)
|
|
149 MCS1 (BW40)
|
|
150 MCS2 (BW40)
|
|
151 MCS3 (BW40)
|
|
152 MCS4 (BW40)
|
|
153 MCS5 (BW40)
|
|
154 MCS6 (BW40)
|
|
155 MCS7 (BW40)
|
|
0xff Default
|
|
<MinPwr> - Minimum power level in dBm
|
|
<MaxPwr> - Maximum power level in dBm
|
|
<step> - Power step
|
|
|
|
Note: Firmware may adjust the setting if over limit, final value can be
|
|
verified using get command.
|
|
|
|
Examples:
|
|
iwpriv mlan0 txpowercfg 0xff : Default power configuration
|
|
iwpriv mlan0 txpowercfg 11 12 : Set power level 12 dBm to data rate 54 Mbps
|
|
iwpriv mlan0 txpowercfg 7 11 16 1 : Set power level 11 dBm to 16 dBm with
|
|
step 1 to data rate 18 Mbps
|
|
iwpriv mlan0 txpowercfg : Get current configuration
|
|
mlan0 txpowercfg:2 3 13 18 2 1 1 13 18 2 0 0 13 18 2
|
|
10 11 13 15 2 8 9 13 16 2 6 7 13 17 2 4 5 13 17 2
|
|
17 19 13 15 2 15 16 13 16 2 13 14 13 17 2 12 12 13 17 2
|
|
145 147 13 14 1 143 144 13 14 1 141 142 13 14 1 140 140 13 14 1
|
|
|
|
2 -> First rate index is 5.5 Mbps.
|
|
3 -> Last rate index is 11 Mbps.
|
|
13 -> Min Tx power value is 13 dBm.
|
|
18 -> Max Tx power value is 18 dBm.
|
|
2 -> Power adjustment step value is 2.
|
|
|
|
Similarly
|
|
17 -> First rate index is MCS5 (BW20).
|
|
19 -> Last rate index is MCS7 (BW20).
|
|
13 -> Min Tx power value is 13 dBm.
|
|
15 -> Max Tx power value is 15 dBm.
|
|
2 -> Power adjustment step value is 2.
|
|
|
|
so on...
|
|
|
|
qoscfg
|
|
This command sets WMM IE QOS info when an argument is given, and gets current WMM
|
|
IE QOS info when no argument is given.
|
|
|
|
Examples:
|
|
iwpriv mlan0 qoscfg 0x0f : Set WMM IE QOS info to 0x0f
|
|
iwpriv mlan0 qoscfg : Get WMM IE QOS info
|
|
|
|
getdatarate
|
|
This command is used to get the data rate (index) being used in last Tx
|
|
packet and last Rx packet.
|
|
|
|
bcninterval
|
|
This command is used to set/get the beacon interval in ad-hoc mode.
|
|
The valid beacon interval is between 20 - 1000, default beacon
|
|
interval is 100.
|
|
|
|
Where <n>
|
|
Beacon interval in TU (Time Unit: 1024 us).
|
|
|
|
Examples:
|
|
iwpriv mlan0 bcninterval 200 : Set ad-hoc beacon interval to 200
|
|
iwpriv mlan0 bcninterval : Get ad-hoc beacon interval
|
|
|
|
sysclock
|
|
This command is used to set/get system clocks in MHz.
|
|
The current system clock, configurable system clocks and all of the
|
|
supported system clocks will be returned if no parameter provided.
|
|
|
|
Examples:
|
|
iwpriv mlan0 sysclock : Get system clocks
|
|
80 80 128 128 128 5 11 16 20 22 32 40 44 64 80 106 128 160 ...
|
|
(The current system clock is 80 MHz.
|
|
The configurable system clocks of non-security, security, non-security
|
|
A-MPDU and security A-MPDU are 80 MHz, 128 MHz, 128 MHz and 128 MHz.
|
|
The supported system clocks are 5 MHz, 11 MHz, ..., 160 MHz, 182 MHz,
|
|
213 MHz, 256 MHz, 320 Mhz, 366 MHz , ... . the Max system clocks is different
|
|
for different chips, you could use this command to get the supported system clock)
|
|
|
|
iwpriv mlanX sysclock 80 : Set system clock in non-security mode
|
|
to 80 MHz, no change for others
|
|
iwpriv mlanX sysclock 0 0 128 : Set system clock in non-security A-MPDU
|
|
mode to 128 MHz, no changes for others
|
|
|
|
drvdbg
|
|
This command is used to set/get the bit masks of driver debug message control.
|
|
|
|
Usage:
|
|
iwpriv mlanX drvdbg [n]
|
|
|
|
Where the parameter <n> is the generic debug message control bit mask.
|
|
The following types of driver debug messages can be dynamically enabled or
|
|
disabled by setting or clearing the corresponding bits,
|
|
bit 0: MMSG PRINTM(MMSG,...)
|
|
bit 1: MFATAL PRINTM(MFATAL,...)
|
|
bit 2: MERROR PRINTM(MERROR,...)
|
|
bit 3: MDATA PRINTM(MDATA,...)
|
|
bit 4: MCMND PRINTM(MCMND,...)
|
|
bit 5: MEVENT PRINTM(MEVENT,...)
|
|
bit 6: MINTR PRINTM(MINTR,...)
|
|
bit 7: MIOCTL PRINTM(MIOCTL,...)
|
|
...
|
|
bit 16: MDAT_D PRINTM(MDAT_D,...), DBG_HEXDUMP(MDAT_D,...)
|
|
bit 17: MCMD_D PRINTM(MCMD_D,...), DBG_HEXDUMP(MCMD_D,...)
|
|
bit 18: MEVT_D PRINTM(MEVT_D,...), DBG_HEXDUMP(MEVT_D,...)
|
|
bit 19: MFW_D PRINTM(MFW_D,...), DBG_HEXDUMP(MFW_D,...)
|
|
bit 20: MIF_D PRINTM(MIF_D,...), DBG_HEXDUMP(MIF_D,...)
|
|
...
|
|
bit 28: MENTRY PRINTM(MENTRY,...), ENTER(), LEAVE()
|
|
bit 29: MWARN PRINTM(MWARN,...)
|
|
bit 30: MINFO PRINTM(MINFO,...)
|
|
|
|
If CONFIG_DEBUG=2, all kinds of debug messages can be configured.
|
|
|
|
If CONFIG_DEBUG=1, all kinds of debug messages can be configured except
|
|
for MENTRY, MWARN and MINFO. By default MMSG, MFATAL and MERROR are enabled.
|
|
|
|
Some special debug messages,
|
|
'*' // MLAN driver ISR is called (bit 6 MINTR enabled)
|
|
'|' // PS awake event is received (bit 5 MEVENT enabled)
|
|
'_' // PS sleep event is received (bit 5 MEVENT enabled)
|
|
'+' // PS sleep confirm is sent (bit 5 MEVENT enabled)
|
|
|
|
Examples:
|
|
iwpriv mlan0 drvdbg : Get the current driver debug masks
|
|
iwpriv mlan0 drvdbg 0 : Disable all the debug messages
|
|
iwpriv mlan0 drvdbg 7 : Enable MMSG, MFATAL and MERROR messages
|
|
iwpriv mlan0 drvdbg 0x20037 : Enable MMSG, MFATAL, MEEROR,
|
|
MCMND, MEVENT and MCMD_D messages
|
|
iwpriv mlan0 drvdbg -1 : Enable all the debug messages
|
|
|
|
warmreset
|
|
This command is used for warm reset of the interface.
|
|
|
|
Usage:
|
|
iwpriv mlanX warmreset
|
|
|
|
regrdwr
|
|
This command is used to read/write the adapter register.
|
|
|
|
Usage:
|
|
iwpriv mlanX regrdwr <type> <offset> [value]
|
|
|
|
where the parameters are,
|
|
<type>: 1:MAC/SOC, 2:BBP, 3:RF, 5:CAU
|
|
<offset>: offset of register
|
|
[value]: value to be written
|
|
Note: If highest bit of a 32-bit value needs to be set, use negative input.
|
|
The calculation is -(0xffffffff - value + 1). Range from -0x80000000 to -1.
|
|
|
|
Examples:
|
|
iwpriv mlan0 regrdwr 1 0xa060 : Read the MAC register
|
|
iwpriv mlan0 regrdwr 1 0xa060 0x12 : Write the MAC register
|
|
iwpriv mlan0 regrdwr 1 0xa794 -0x80000000
|
|
: Write 0x80000000 to MAC register
|
|
iwpriv mlan0 regrdwr 1 0xa794 -0x00000001
|
|
: Write 0xffffffff to MAC register
|
|
|
|
rdeeprom
|
|
This command is used to read the EEPROM contents of the card.
|
|
|
|
Usage:
|
|
iwpriv mlanX rdeeprom <offset> <length>
|
|
|
|
where the parameters are,
|
|
<offset>: multiples of 4
|
|
<length>: 4-20, multiples of 4
|
|
|
|
Example:
|
|
iwpriv mlan0 rdeeprom 0 20 : Read 20 bytes of EEPROM data from offset 0
|
|
|
|
memrdwr
|
|
This command is used to read/write the adapter memory.
|
|
|
|
Usage:
|
|
iwpriv mlanX memrdwr <address> [value]
|
|
|
|
where the parameters are,
|
|
<address>: memory address
|
|
[value]: value to be written
|
|
Note: If highest bit of a 32-bit address/value needs to be set, use negitive input.
|
|
The calculation is -(0xffffffff - address/value + 1). Range from -0x80000000 to -1.
|
|
|
|
Examples:
|
|
iwpriv mlan0 memrdwr 0x4cf70 : Read memory address 0x4cf70
|
|
iwpriv mlan0 memrdwr -0x80000000
|
|
: Read memory address 0x80000000
|
|
iwpriv mlan0 memrdwr -0x7fff6000 -0x40000000
|
|
: Write 0xc0000000 to memory address 0x8000a000
|
|
|
|
inactivityto
|
|
This command is used to set/get the inactivity timeout value, which specifies
|
|
when WLAN device is put to sleep.
|
|
|
|
Usage:
|
|
iwpriv mlanX inactivityto <n> <m> <l> [k]
|
|
|
|
where the parameter are:
|
|
<n>: timeout unit in microseconds.
|
|
<m>: Inactivity timeout for unicast data.
|
|
<l>: Inactivity timeout for multicast data.
|
|
[k]: Inactivity timeout for new Rx traffic after PS notification to AP.
|
|
|
|
Examples:
|
|
iwpriv mlan0 inactivityto : Get the timeout value
|
|
iwpriv mlan0 inactivityto 1000 2 3 : Set timeout unit to 1000 us (1 ms),
|
|
inactivity timeout for unicast data is 2 ms,
|
|
inactivity timeout for multicast data is 3 ms
|
|
|
|
scancfg
|
|
This command is used to set/get scan configuration parameters.
|
|
|
|
Usage:
|
|
iwpriv mlanX scancfg [t] [m] [p] [s] [a] [b] [ext]
|
|
|
|
where the parameters:
|
|
[t]: Scan Type (0: Unchanged, 1: Active, 2: Passive, default Active)
|
|
[m]: Scan Mode (0: Unchanged, 1: BSS, 2: IBSS, 3: Any, default Any)
|
|
[p]: Scan Probes (0: Unchanged, 1-4: Number of probes per channel, default 4)
|
|
[s]: Specific Scan Time (0: Unchanged, n: Value in ms, default 110 ms, max 500 ms)
|
|
[a]: Active Scan Time (0: Unchanged, n: Value in ms, default 200 ms, max 500 ms)
|
|
[b]: Passive Scan Time (0: Unchanged, n: Value in ms, default 200 ms, max 2000 ms)
|
|
[ext]: Extended scan (0: Legacy scan, 1: Extended scan)
|
|
|
|
No change if the parameter is 0 or the parameter is not provided.
|
|
|
|
Examples:
|
|
iwpriv mlan0 scancfg : Get all the current scan configuration settings
|
|
iwpriv mlan0 scancfg 1 3 : Set scan type to active and scan mode to any,
|
|
all the other scan configurations are unchanged
|
|
iwpriv mlan0 scancfg 0 1 2 200 : Set scan mode to BSS, number of probes to 2 and
|
|
specific scan time to 200 ms, all the other scan
|
|
configurations are unchanged
|
|
|
|
sleeppd
|
|
This command is used to configure the sleep period of the WLAN device.
|
|
|
|
Usage:
|
|
iwpriv mlanX sleeppd [<period>]
|
|
|
|
Where the parameter is:
|
|
period: sleep period in milliseconds. Range 10~60. 0 for disable.
|
|
|
|
Examples:
|
|
iwpriv mlan0 sleeppd : Get sleep period configuration
|
|
iwpriv mlan0 sleeppd 10 : Set sleep period to 10 ms
|
|
|
|
pscfg
|
|
This command is used to set/get PS configuration parameters.
|
|
|
|
Usage:
|
|
iwpriv mlanX pscfg [k] [d] [l] ...
|
|
|
|
Where the parameters:
|
|
[k]: Keep alive null packet interval (0: Unchanged, -1: Disable, n: Interval in seconds)
|
|
[d]: DTIM interval ( 0: Unchanged,
|
|
1-5: Value,
|
|
65534: DTIM will be ignored, listen interval will be used,
|
|
65533: Closest DTIM to the listen interval period will be used )
|
|
[l]: Local listen interval ( 0: Unchanged,
|
|
-1: Disable,
|
|
1-49: Value in beacon intervals,
|
|
>= 50: Value in TUs )
|
|
[b]: Beacon miss timeout (0: Unchanged, 1-50: Value in milliseconds, 65535: Disable)
|
|
[p]: Delay to PS (0-65535: Value in milliseconds, default 1000ms)
|
|
[m]: PS mode (0: Unchanged, 1: Auto mode, 2: PS-Poll mode, 3: PS Null mode)
|
|
No change if parameters are not provided.
|
|
|
|
Examples:
|
|
iwpriv mlan0 pscfg : Get all the current PS configuration settings
|
|
iwpriv mlan0 pscfg 3 4 : Set PS keep alive null packet interval to 3 seconds
|
|
and DTIM interval to 4, all the other configurations
|
|
are unchanged
|
|
iwpriv mlan0 pscfg 0 0 0 0 50 2 : Set delay to PS to 50 ms and PS mode to PS-Poll mode,
|
|
keep the others unchanged
|
|
|
|
fwwakeupmethod
|
|
This command is used to set/get the firmware wakeup method.
|
|
|
|
where value is:
|
|
[n]:
|
|
1 -- Firmware wakeup through the interface command interrupt
|
|
-- (default setting for SDIO/PCIe/USB)
|
|
2 -- Firmware wakeup through the GPIO pin
|
|
[g]:If firware wakeup throug GPIO pin, [g] is GPIO pin number
|
|
|
|
Examples:
|
|
iwpriv mlan0 fwwakeupmethod : Get current firmware wakeup method
|
|
iwpriv mlan0 fwwakeupmethod 1 : Set firmware wakeup method to Interface mode
|
|
iwpriv mlan0 fwwakeupmethod 2 5 : Set firmware wakeup method to GPIO mode, GPIO_pin=5
|
|
|
|
getkey
|
|
This command is used to get PTK/GTK
|
|
|
|
iwpriv mlanX getkey
|
|
associate
|
|
Request an association to a given SSID/BSSID pair. This the only accurate
|
|
way to pick a specific AP and ESS for an association. The entry must
|
|
already exist in the scan table for the association to be attempted.
|
|
|
|
iwpriv mlanX associate "xx:xx:xx:xx:xx:xx SSID"
|
|
|
|
sleepparams
|
|
This command is used to set the sleepclock configurations
|
|
|
|
Usage:
|
|
iwpriv mlanX sleepparams [<p1> <p2> <p3> <p4> <p5> <p6>]
|
|
|
|
where:
|
|
p1 is Sleep clock error in ppm (0-65535)
|
|
p2 is Wakeup offset in usec (0-65535)
|
|
p3 is Clock stabilization time in usec (0-65535)
|
|
p4 is Control periodic calibration (0-2)
|
|
p5 is Control the use of external sleep clock (0-2)
|
|
p6 is reserved for debug (0-65535)
|
|
|
|
Examples:
|
|
iwpriv mlan0 sleepparams : Get current sleepclock configuration
|
|
iwpriv mlan0 sleepparams 10 1000 2000 1 0 128 : Set sleepclock configuration
|
|
|
|
netmon
|
|
This command is used to set/get sniffer mode configuration.
|
|
Note: The channel and band config is optional. If not specified, or if
|
|
any STA/uAP/STA+uAP connection is active, sniffer activity will be started
|
|
on the current config set in the FW.
|
|
'rtap' monitor interface will be created on enabling sniffer activity and
|
|
should be made 'up' for capturing in a sniffer app.
|
|
|
|
Usage:
|
|
iwpriv <interface> netmon [<act> [<filter>]]
|
|
iwpriv <interface> netmon [<act> [<filter>] [<band> <chan> [offset]]]
|
|
|
|
Where the parameters are:
|
|
<interface> : mlanX, uapX
|
|
<act> : (1/0) enable/disable sniffer activity
|
|
<filter> : network monitor filer flag
|
|
bit 0: (1/0) enable/disable management frame
|
|
bit 1: (1/0) enable/disable control frame
|
|
bit 2: (1/0) enable/disable data frame
|
|
bit 3: (1/0) enable/disable frames destined to active connection only
|
|
bit 4: (1/0) enable/disable decrypted unicast data/mgmt frames
|
|
<band> : 802.11 band
|
|
bit 0: B
|
|
bit 1: G
|
|
bit 2: A
|
|
bit 3: GN
|
|
bit 4: AN
|
|
bit 5: AC 2.4G
|
|
bit 6: AC 5G
|
|
<chan> : channel to monitor
|
|
[offset] : secondary channel bandwidth
|
|
0 - Bandwidth 20Mhz
|
|
1 - HT Bandwidth 40Mhz sec channel above
|
|
3 - HT Bandwidth 40Mhz sec channel below
|
|
4 - VHT Bandwidth 80Mhz
|
|
|
|
Examples:
|
|
iwpriv mlan0 netmon : Get the current sniffer mode configuration
|
|
iwpriv mlan0 netmon 0 : Disable network monitor activity
|
|
iwpriv uap0 netmon 1 7 : Enable sniffer activity on current channel set in FW,
|
|
set filter data, control, management frame.
|
|
iwpriv mlan0 netmon 1 4 11 6 : Enable sniffer activity in absence of active connection,
|
|
set filter data frame, band B/G/GN and channel 6
|
|
iwpriv mlan0 netmon 1 7 20 64 1 : Enable sniffer activity in absence of active connection,
|
|
set filter management, control and data frame, band A/AN,
|
|
channel 64 and secondary channel above
|
|
iwpriv uap0 netmon 1 0x0c : Enable sniffer activity, set filter data frames
|
|
destined to the active uAP connection only
|
|
|
|
iwpriv mlan0 netmon 1 0x1d : Enable sniffer activity, set filter decrypted data and
|
|
management frames destined to the active STA connection
|
|
only
|
|
|
|
authtype
|
|
This command is used to set/get authentication type.
|
|
|
|
Usage:
|
|
iwpriv mlanX authtype [n]
|
|
|
|
where <n>
|
|
0: 802.11 open system authentication
|
|
1: 802.11 shared key authentication
|
|
255: allow open system or shared key authentication (default)
|
|
|
|
Examples:
|
|
iwpriv mlan0 authtype 0 : use open system authentication
|
|
iwpriv mlan0 authtype 1 : use shared key authentication
|
|
iwpriv mlan0 authtype 255 : allow open system or shared key authentication
|
|
iwpriv mlan0 authtype : get current setting
|
|
|
|
powercons
|
|
This command is used to set the local transmit power constraint.
|
|
Value is in dbm unit. This command is only used for ad-hoc start.
|
|
|
|
Usage:
|
|
iwpriv mlanX powercons [n]
|
|
|
|
Examples:
|
|
iwpriv mlanX powercons : get the current setting
|
|
iwpriv mlanX powercons 12 : set local power constraint to 12 dbm
|
|
|
|
htstreamcfg
|
|
This command is used to set/get HT stream configuration.
|
|
The setting only takes effect in next association.
|
|
|
|
Usage:
|
|
iwpriv mlanX htstreamcfg [n]
|
|
|
|
where <n>
|
|
0x11: HT stream 1x1 mode
|
|
0x22: HT stream 2x2 mode
|
|
|
|
Examples:
|
|
iwpriv mlan0 htstreamcfg : Get current setting
|
|
iwpriv mlan0 htstreamcfg 0x11 : Set HT stream 1x1 mode
|
|
iwpriv mlan0 htstreamcfg 0x22 : Set HT stream 2x2 mode
|
|
|
|
ipaddr
|
|
This command is used to set/get IP address.
|
|
|
|
Usage:
|
|
iwpriv mlanX ipaddr ["<op>;<ipaddr>"]
|
|
|
|
where <op>
|
|
0: Remove the IP address
|
|
bit 0: Set IP address for broadcast ARP filter, which will be auto enabled
|
|
in next host sleep configuration
|
|
bit 1: Set IP address for auto broadcast ARP response
|
|
|
|
Examples:
|
|
iwpriv mlan0 ipaddr : Get current settings
|
|
iwpriv mlan0 ipaddr "0" : Remove IP address
|
|
iwpriv mlan0 ipaddr "1;192.168.0.5" : Set IP address for ARP filter
|
|
iwpriv mlan0 ipaddr "3;192.168.0.6" : Set IP address for ARP filter
|
|
: and auto ARP response
|
|
|
|
macctrl
|
|
This command is used to set/get MAC control.
|
|
It's recommended to read the current setting first to avoid override issue.
|
|
|
|
Usage:
|
|
iwpriv mlanX macctrl [n]
|
|
|
|
where <n>
|
|
bit 0: Rx enabled
|
|
bit 1: Tx enabled
|
|
bit 3: WEP enabled
|
|
bit 4: EthernetII enabled
|
|
bit 7: Promiscuous enabled
|
|
bit 8: All multicast enabled
|
|
bit 9: RTS/CTS enabled (0: CTS to self)
|
|
bit 11: Force 11n protection disabled
|
|
bit 12: Ad-hoc g protection disabled
|
|
...
|
|
|
|
Examples:
|
|
iwpriv mlan0 macctrl : Get current MAC control
|
|
iwpriv mlan0 macctrl 0x13 : Set Tx/Rx on and EthernetII on
|
|
iwpriv mlan0 macctrl 0x813 : Set Tx/Rx on and EthernetII on
|
|
: Disable force 11n protection
|
|
|
|
dfstesting
|
|
This command is used to set/get settings for DFS testing.
|
|
|
|
Usage:
|
|
iwpriv mlanX dfstesting [<user_cac_pd> <user_nop_pd> <no_chan_change> <fixed_chan_num>]
|
|
|
|
where <user_cac_pd> is user-configured Channel Availability Check in msec
|
|
0 = disable, use default period (60000)
|
|
1-65535 = enable with that period
|
|
where <user_nop_pd> is user-configured Non-Occupancy Period in sec
|
|
0 = disable, use default period (1800)
|
|
1-65535 = enable with that period
|
|
where <no_chan_change> is enable/disable no channel change on radar
|
|
0 = disable, 1 = enable (overrides below)
|
|
where <fixed_chan_num> is user-configured channel to change to on radar
|
|
0 = disable, 1-255 = enable with that channel
|
|
(channel validity for region, etc. is not checked)
|
|
(only takes effect if no_chan_change = 0)
|
|
|
|
Examples:
|
|
iwpriv mlan0 dfstesting : Get current dfstesting settings
|
|
iwpriv mlan0 dfstesting 2000 0 0 0 : user_cac=2sec, others disabled/default
|
|
iwpriv mlan0 dfstesting 0 0 1 0 : only no_chan_change enabled
|
|
iwpriv mlan0 dfstesting 0 120 0 64 : user_nop=2min, force chan 64 on radar
|
|
|
|
indrstcfg
|
|
This command is used to set/get settings for independent reset mode
|
|
|
|
Usage:
|
|
iwpriv mlanX indrstcfg <ir_mode> [gpio_pin]
|
|
|
|
where <ir_mode> is independent reset mode
|
|
0 = disable independent reset
|
|
1 = enable out band and disable in band
|
|
2 = enable in band and disable out band
|
|
where <gpio_pin> is user-configured gpio pin number to be used for oob mode
|
|
0xFF = use FW default gpio assignment
|
|
0-15 = gpio pin number
|
|
|
|
Examples:
|
|
iwpriv mlan0 indrstcfg : Get current settings
|
|
iwpriv mlan0 indrstcfg 1 14 : Enable oob_mode with gpio pin 14
|
|
iwpriv mlan0 indrstcfg 1 0xff : Enable oob_mode with default gpio pin
|
|
iwpriv mlan0 indrstcfg 0 : Disable ir_mode
|
|
iwpriv mlan0 indrstcfg 2 : Enable in band reset mode
|
|
|
|
|
|
===============================================================================
|
|
U S E R M A N U A L F O R M L A N C O N F I G
|
|
|
|
NAME
|
|
mlanconfig - configure the additional parameters available for the Marvell mdriver.
|
|
|
|
SYNOPSIS
|
|
mlanconfig -v
|
|
mlanconfig <mlanX> <command> [parameters] ...
|
|
|
|
mlanconfig mlanX hostcmd <bg_scan.conf> bgscfg
|
|
mlanconfig mlanX hostcmd <requesttpc.conf> requesttpc
|
|
mlanconfig mlanX hostcmd <crypto_test.conf> crypto_test
|
|
mlanconfig mlanX hostcmd <subevent.conf> subevent_get
|
|
mlanconfig mlanX hostcmd <subevent.conf> subevent_set
|
|
mlanconfig mlanX hostcmd <auto_tx.conf> auto_tx_get
|
|
mlanconfig mlanX hostcmd <auto_tx.conf> nat_keep_alive
|
|
mlanconfig mlanX hostcmd <auto_tx.conf> auto_tx_unreg
|
|
mlanconfig mlanX hostcmd <txrate_cfg.conf> txrate_cfg_get
|
|
mlanconfig mlanX hostcmd <txrate_cfg.conf> txrate_cfg_set_bg
|
|
mlanconfig mlanX hostcmd <txrate_cfg.conf> txrate_cfg_set_bgn
|
|
mlanconfig mlanX hostcmd <txpwrlimit_cfg.conf> txpwrlimit_cfg_get
|
|
mlanconfig mlanX hostcmd <txpwrlimit_cfg.conf> txpwrlimit_2g_cfg_set
|
|
mlanconfig mlanX hostcmd <txpwrlimit_cfg.conf> txpwrlimit_5g_cfg_set
|
|
mlanconfig mlanX hostcmd <pad_cfg.conf> pad_cfg_get
|
|
mlanconfig mlanX hostcmd <pad_cfg.conf> pad_cfg_set
|
|
mlanconfig mlanX hostcmd <11n_2040coex.conf> 2040coex
|
|
mlanconfig mlanX hostcmd <robust_btc.conf> mode_get
|
|
mlanconfig mlanX hostcmd <robust_btc.conf> mode_timeshare
|
|
mlanconfig mlanX hostcmd <robust_btc.conf> mode_spatial
|
|
mlanconfig mlanX hostcmd <robust_btc.conf> generictime
|
|
mlanconfig mlanX hostcmd <robust_btc.conf> a2dptime
|
|
mlanconfig mlanX hostcmd <robust_btc.conf> inquirytim
|
|
mlanconfig mlanX hostcmd <robust_btc.conf> ap_generictime
|
|
mlanconfig mlanX hostcmd <robust_btc.conf> ap_a2dptime
|
|
mlanconfig mlanX hostcmd <robust_btc.conf> ap_inquirytime
|
|
mlanconfig mlanX arpfilter <arpfilter.conf>
|
|
mlanconfig mlanX mefcfg <mef.conf>
|
|
mlanconfig mlanX cfgdata <register type> <conf file>
|
|
mlanconfig mlanX setuserscan [ARGS]
|
|
mlanconfig mlanX getscantable [ARGS]
|
|
mlanconfig mlanX addts <filename.conf> <section# of tspec> <timeout in ms>
|
|
mlanconfig mlanX delts <filename.conf> <section# of tspec>
|
|
mlanconfig mlanX qconfig set msdu <lifetime in TUs> [Queue Id: 0-3]
|
|
mlanconfig mlanX qconfig get [Queue Id: 0-3]
|
|
mlanconfig mlanX qconfig def [Queue Id: 0-3]
|
|
mlanconfig mlanX qstats on [Queue Id: 0-3]
|
|
mlanconfig mlanX qstats off [Queue Id: 0-3]
|
|
mlanconfig mlanX qstats get [Queue Id: 0-3]
|
|
mlanconfig mlanX qstatus
|
|
mlanconfig mlanX ts_status
|
|
mlanconfig mlanX regrdwr <type> <offset> [value]
|
|
mlanconfig mlanX memrdwr <address> [value]
|
|
mlanconfig mlanX customie <index> <mask> <IE buffer>
|
|
mlanconfig mlanX tdls_config <0/1>
|
|
mlanconfig mlanX tdls_setinfo <tdls.conf>
|
|
mlanconfig mlanX tdls_setup <tdls.conf>
|
|
mlanconfig mlanX tdls_discovery <tdls.conf>
|
|
mlanconfig mlanX tdls_teardown <tdls.conf>
|
|
mlanconfig mlanX tdls_powermode <tdls.conf>
|
|
mlanconfig mlanX tdls_channel_switch <tdls.conf>
|
|
mlanconfig mlanX tdls_stop_channel_switch <tdls.conf>
|
|
mlanconfig mlanX tdls_cs_params <tdls.conf>
|
|
mlanconfig mlanX tdls_disable_cs <0/1>
|
|
mlanconfig mlanX tdls_link_status
|
|
mlanconfig mlanX tdls_debug "wrong_bss" <0/1>
|
|
mlanconfig mlanX tdls_debug "setup_existing_link" <0/1>
|
|
mlanconfig mlanX tdls_debug "fail_setup_confirm" <0/1>
|
|
mlanconfig mlanX tdls_debug "setup_with_prohibited" <0/1>
|
|
mlanconfig mlanX tdls_debug "higher_lower_mac" <0/1>
|
|
mlanconfig mlanX tdls_debug "ignore_key_expiry" <0/1>
|
|
mlanconfig mlanX tdls_debug "allow_weak_security" <0/1>
|
|
mlanconfig mlanX tdls_debug "stop_rx" <0/1>
|
|
mlanconfig mlanX tdls_debug "cs_im_return" <0/1>
|
|
mlanconfig mlanX mgmtframetx <mgmt_frame.conf>
|
|
|
|
|
|
DESCRIPTION
|
|
|
|
Those commands are used in Marvell specific application called mlanconfig.
|
|
|
|
===========
|
|
-v
|
|
This command is used to display the version of mlanconfig utility.
|
|
Usage:
|
|
mlanconfig -v
|
|
|
|
hostcmd bgscfg
|
|
This command is used to configure the various parameters for PPS/UAPSD
|
|
or normal background scan.
|
|
|
|
Usage:
|
|
mlanconfig mlanX hostcmd config/bg_scan.conf bgscfg
|
|
|
|
hostcmd requesttpc
|
|
This command is used to request 802.11H TPC info.
|
|
|
|
Usage:
|
|
mlanconfig mlanX hostcmd config/requesttpc.conf requesttpc
|
|
|
|
hostcmd crypto_test
|
|
This command is used to test the encryption/decryption API of the firmware.
|
|
|
|
Usage:
|
|
mlanconfig mlanX hostcmd config/crypto_test.conf crypto_test
|
|
|
|
hostcmd subevent_get
|
|
hostcmd subevent_set
|
|
This command is used to get/set the configurations for event descriptor
|
|
interface command.
|
|
subsvent_get: get subscribed event parameters
|
|
subsvent_set: set subscribed event parameters
|
|
|
|
Usage:
|
|
mlanconfig mlanX hostcmd config/subevent.conf subevent_get
|
|
mlanconfig mlanX hostcmd config/subevent.conf subevent_set
|
|
|
|
hostcmd auto_tx_get
|
|
hostcmd nat_keep_alive
|
|
hostcmd auto_tx_unreg
|
|
This command is used to configures the Frame Auto Transmission parameters.
|
|
auto_tx_get: get auto_tx parameters
|
|
nat_keep_alive: register to firmware for sending NAT Keep Alive packet
|
|
auto_tx_unreg: unregister to firmware auto_tx
|
|
|
|
Usage:
|
|
mlanconfig mlanX hostcmd config/auto_tx.conf auto_tx_get
|
|
mlanconfig mlanX hostcmd config/auto_tx.conf nat_keep_alive
|
|
mlanconfig mlanX hostcmd config/auto_tx.conf auto_tx_unreg
|
|
|
|
hostcmd txrate_cfg_get
|
|
hostcmd txrate_cfg_set_bg
|
|
hostcmd txrate_cfg_set_bgn
|
|
This command is used to set/get the transmit data rate.
|
|
|
|
Usage:
|
|
mlanconfig mlanX hostcmd config/txrate_cfg.conf txrate_cfg_get
|
|
mlanconfig mlanX hostcmd config/txrate_cfg.conf txrate_cfg_set_bg
|
|
mlanconfig mlanX hostcmd config/txrate_cfg.conf txrate_cfg_set_bgn
|
|
|
|
hostcmd txpwrlimit_cfg_get
|
|
hostcmd txpwrlimit_2g_cfg_set
|
|
hostcmd txpwrlimit_5g_cfg_set
|
|
This command is used to set/get the configuration data of Tx power limitation.
|
|
Note: The configuration set should be issued when STA is disconnected.
|
|
|
|
Usage:
|
|
mlanconfig mlanX hostcmd config/txpwrlimit_cfg.conf txpwrlimit_cfg_get
|
|
mlanconfig mlanX hostcmd config/txpwrlimit_cfg.conf txpwrlimit_2g_cfg_set
|
|
mlanconfig mlanX hostcmd config/txpwrlimit_cfg.conf txpwrlimit_5g_cfg_set
|
|
|
|
hostcmd pad_cfg_get
|
|
hostcmd pad_cfg_set
|
|
This command is used to set/get the configuration data for PAD OR.
|
|
|
|
Usage:
|
|
mlanconfig mlanX hostcmd config/pad_cfg.conf pad_cfg_get
|
|
mlanconfig mlanX hostcmd config/pad_cfg.conf pad_cfg_set
|
|
|
|
hostcmd 2040coex
|
|
This command is used to send the 11n 20/40 Coex command to firmware.
|
|
Firmware will send 11n 20/40 Coex management action frame to AP.
|
|
|
|
Usage:
|
|
mlanconfig mlanX hostcmd config/11n_2040coex.conf 2040coex
|
|
|
|
hostcmd mode_get
|
|
hostcmd mode_timeshare
|
|
hostcmd mode_spatial
|
|
This command is used to get/set Robust BT Coex.
|
|
mode_get: get the current mode
|
|
mode_timeshare: set Robust BT Coex to timeshare mode (default on 1x1 chips)
|
|
mode_spatial: set Robust BT Coex to spatial mode (only for, and default on 2x2 chips)
|
|
|
|
Usage:
|
|
mlanconfig mlanX hostcmd config/robust_btc.conf mode_get
|
|
mlanconfig mlanX hostcmd config/robust_btc.conf mode_timeshare
|
|
mlanconfig mlanX hostcmd config/robust_btc.conf mode_spatial
|
|
|
|
hostcmd generictime
|
|
hostcmd a2dptime
|
|
hostcmd inquirytime
|
|
hostcmd ap_generictime
|
|
hostcmd ap_a2dptime
|
|
hostcmd ap_inquirytime
|
|
This command is used to configure the time slice of COEX (only works in timeshare mode)
|
|
generictime: configure the Bttime and Wlantime in Station Generic case
|
|
a2dptime: configure the Bttime and Wlantime in Station A2DP case
|
|
inquirytime: configure the Bttime and Wlantime in Station Inquiry case
|
|
ap_generictime: configure the Bttime and Wlantime in Ap Generic case
|
|
ap_a2dptime: configure the Bttime and Wlantime in Ap A2DP case
|
|
ap_inquirytime: configure the Bttime and Wlantime in Ap Inquiry case
|
|
|
|
Usage:
|
|
mlanutl mlanX hostcmd config/robust_btc.conf generictime
|
|
mlanutl mlanX hostcmd config/robust_btc.conf a2dptime
|
|
mlanutl mlanX hostcmd config/robust_btc.conf inquirytim
|
|
mlanutl mlanX hostcmd config/robust_btc.conf ap_generictime
|
|
mlanutl mlanX hostcmd config/robust_btc.conf ap_a2dptime
|
|
mlanutl mlanX hostcmd config/robust_btc.conf ap_inquirytime
|
|
|
|
arpfilter
|
|
This command is used to configure the ARP filtering parameters.
|
|
|
|
Usage:
|
|
mlanconfig mlanX arpfilter config/arpfilter.conf
|
|
|
|
mefcfg
|
|
This command is used to set MEF settings.
|
|
|
|
Usage:
|
|
mlanconfig mlanX mefcfg config/mef.conf
|
|
|
|
cfgdata
|
|
This command is used to set/get the configuration data to/from firmware.
|
|
|
|
Usage:
|
|
mlanconfig mlanX cfgdata <type> <.conf file name>
|
|
This command is used to set the cfg data in the .conf file to firmware.
|
|
|
|
mlanconfig mlanX cfgdata <type>
|
|
This command is used to get the cfg data from firmware and display
|
|
on to the console.
|
|
|
|
Where the value of <type> field is:
|
|
2 -- Cal data download and <.conf file name> is cal_data.conf
|
|
|
|
setuserscan
|
|
Initiate a customized scan and retrieve the results
|
|
|
|
Usage:
|
|
mlanconfig mlanX setuserscan [ARGS]
|
|
|
|
Where [ARGS]:
|
|
ssid="[SSID]" specify a SSID filter for the scan
|
|
chan=[chan#][band][mode] where band is [a,b,g,n] and mode is
|
|
blank for active or 'p' for passive
|
|
bssid=xx:xx:xx:xx:xx:xx specify a BSSID filter for the scan
|
|
wc="[WILDCARD SSID]" specify a UNIX pattern matching filter (using *
|
|
and ?) for SSIDs found in a broadcast probe
|
|
keep=[0 or 1] keep the previous scan results (1), discard (0)
|
|
dur=[scan time] time to scan for each channel in milliseconds
|
|
gap=[time gap] Time gap between two scans in milliseconds
|
|
probes=[#] number of probe requests to send on each chan
|
|
for each broadcast probe required and each SSID
|
|
specific probe required (1-4)
|
|
type=[1,2,3] BSS type: 1 (Infra), 2(Adhoc), 3(Any)
|
|
|
|
Any combination of the above arguments can be supplied on the command line.
|
|
If the chan token is absent, a full channel scan will be completed by driver.
|
|
If the dur or probes tokens are absent, the driver default setting will be
|
|
used. The bssid and ssid fields, if blank, will produce an unfiltered scan.
|
|
It's allowed to input multiple ssid/wc entries, the max entry number is 10.
|
|
The type field will default to 3 (Any) and the keep field will default to 0
|
|
(Discard).
|
|
|
|
Examples:
|
|
1) Perform an active scan on channels 1, 6, and 11 in the 'g' band:
|
|
setuserscan chan=1g,6g,11g
|
|
|
|
2) Perform a passive scan on channel 11 for 20 ms:
|
|
setuserscan chan=11gp dur=20
|
|
|
|
3) Perform an active scan on channels 1, 6, and 11; and a passive scan on
|
|
channel 36 in the 'a' band:
|
|
setuserscan chan=1g,6g,11g,36ap
|
|
|
|
4) Perform an active scan on channel 6 and 36 for specific SSID:
|
|
setuserscan chan=6g,36a ssid=TestAP1 ssid=TestAP2
|
|
|
|
5) Scan all available channels (B/G/N, A bands) for a specific BSSID, keep
|
|
the current scan table intact, update existing or append new scan data:
|
|
setuserscan bssid=00:50:43:20:12:82 keep=1
|
|
|
|
6) Scan channel 6, for all infrastructure networks, sending two probe
|
|
requests. Keep the previous scan table intact. Update any duplicate
|
|
BSSID/SSID matches with the new scan data:
|
|
setuserscan chan=6g type=1 probes=2 keep=1
|
|
|
|
7) Scan channel 1 and 6, for all networks matching the Mrvl*AP
|
|
or AP*Mrvl? patterns and for MrvlTst SSID. Generate 3 broadcast
|
|
probes for the patterns and 3 SSID specific probes for MrvlTst on
|
|
both channel 1 and channel 6.
|
|
setuserscan chan=1g,6g probes=3 wc="Mrvl*AP" wc="AP*Mrvl?" ssid="MrvlTst"
|
|
|
|
8) Scan all the channels for specified band.
|
|
setuserscan chan=0g
|
|
|
|
9) Scan channel 1 and 6, send 3 probe requests, scan each channel for 40 ms
|
|
with time gap of 50ms between 2 scans
|
|
setuserscan chan=1g,6g probes=3 dur=40 gap=50
|
|
|
|
All entries in the scan table (not just the new scan data when keep=1)
|
|
will be displayed upon completion by use of the getscantable ioctl.
|
|
|
|
getscantable
|
|
Display the current contents of the driver scan table
|
|
|
|
Usage:
|
|
mlanconfig mlanX getscantable
|
|
mlanconfig mlanX getscantable [#]
|
|
mlanconfig mlanX getscantable tsf
|
|
mlanconfig mlanX getscantable help
|
|
|
|
1) Without argument, the entire scantable is displayed.
|
|
2) Specifying a # will display detailed information about a specific scan
|
|
table entry. '0' displays driver cached information regarding the
|
|
current association (if any).
|
|
3) The tsf argument will display the entire scan table with the recorded
|
|
TSF timestamp for the entry.
|
|
4) The help argument will display the legend for the capability field.
|
|
|
|
addts
|
|
Send an ADDTS command to the associated AP.
|
|
|
|
Process a given conf file for a specific TSPEC data block. Send the
|
|
TSPEC along with any other IEs to the driver/firmware for transmission
|
|
in an ADDTS request to the associated AP.
|
|
|
|
Return the execution status of the command as well as the ADDTS response
|
|
from the AP if any.
|
|
|
|
Usage:
|
|
mlanconfig mlanX addts <filename.conf> <section# of tspec> <timeout(ms)>
|
|
|
|
delts
|
|
Send a DELTS command to the associated AP.
|
|
|
|
Process a given conf file for a specific TSPEC data block. Send the
|
|
TSPEC along with any other IEs to the driver/firmware for transmission
|
|
in a DELTS request to the associated AP.
|
|
|
|
Return the execution status of the command. There is no response to a
|
|
DELTS from the AP.
|
|
|
|
Usage:
|
|
mlanconfig mlanX delts <filename.conf> <section# of tspec>
|
|
|
|
qconfig
|
|
Send a WMM AC Queue configuration command to get/set/default params
|
|
|
|
Configure or get the parameters of a WMM AC queue. The command takes
|
|
an optional Queue Id as a last parameter. Without the queue id, all
|
|
queues will be acted upon.
|
|
|
|
Usage:
|
|
mlanconfig mlanX qconfig set msdu <lifetime in TUs> [Queue Id: 0-3]
|
|
mlanconfig mlanX qconfig get [Queue Id: 0-3]
|
|
mlanconfig mlanX qconfig def [Queue Id: 0-3]
|
|
|
|
qstats
|
|
Turn on/off or retrieve and clear the queue statistics for an AC
|
|
|
|
Turn the queue statistics collection on/off for a given AC or retrieve the
|
|
current accumulated stats and clear them from the firmware. The command
|
|
takes an optional Queue Id as a last parameter. Without the queue id,
|
|
all queues will be acted upon.
|
|
|
|
Usage:
|
|
mlanconfig mlanX qstats on [Queue Id: 0-3]
|
|
mlanconfig mlanX qstats off [Queue Id: 0-3]
|
|
mlanconfig mlanX qstats get [Queue Id: 0-3]
|
|
|
|
qstatus
|
|
This command retrieves the current status of the WMM queues. If WMM
|
|
is enabled then it displays the information for each AC in a table.
|
|
|
|
Usage:
|
|
mlanconfig mlanX qstatus
|
|
|
|
ts_status
|
|
This command queries the FW for the status of TSIDs 0 through 7
|
|
configured via call admission control and displays the results in a
|
|
table.
|
|
|
|
Usage:
|
|
mlanconfig mlanX ts_status
|
|
|
|
regrdwr
|
|
This command is used to read/write the adapter register.
|
|
|
|
Usage:
|
|
mlanconfig mlanX regrdwr <type> <offset> [value]
|
|
|
|
where the parameters are,
|
|
<type>: 1:MAC/SOC, 2:BBP, 3:RF, 5:CAU
|
|
<offset>: offset of register
|
|
[value]: value to be written
|
|
|
|
Examples:
|
|
mlanconfig mlan0 regrdwr 1 0xa060 : Read the MAC register
|
|
mlanconfig mlan0 regrdwr 1 0xa794 0x80000000
|
|
: Write 0x80000000 to MAC register
|
|
|
|
memrdwr
|
|
This command is used to read/write the adapter memory.
|
|
|
|
Usage:
|
|
mlanconfig mlanX memrdwr <address> [value]
|
|
|
|
where the parameters are,
|
|
<address>: memory address
|
|
[value]: value to be written
|
|
|
|
Examples:
|
|
mlanconfig mlan0 memrdwr 0x80000000 : Read memory address 0x80000000
|
|
mlanconfig mlan0 memrdwr 0x80000000 0xffffffff
|
|
: Write 0xffffffff to memory address 0x80000000
|
|
|
|
customie
|
|
This command is used to set or get custom IEs for management frames.
|
|
|
|
Usage : customie [INDEX] [MASK] [IEBuffer]
|
|
empty - Get all IE settings
|
|
INDEX: 0 - Get/Set IE index 0 setting
|
|
1 - Get/Set IE index 1 setting
|
|
2 - Get/Set IE index 2 setting
|
|
MAX IE Index depends on device memory.
|
|
|
|
-1 - Append/Delete IE automatically
|
|
Delete will delete the IE from the matching IE buffer
|
|
Append will append the IE to the buffer with the same mask
|
|
MASK : Management subtype mask value as per bit definitions
|
|
: Bit 0 - Association request
|
|
: Bit 1 - Association response
|
|
: Bit 2 - Reassociation request
|
|
: Bit 3 - Reassociation response
|
|
: Bit 4 - Probe request
|
|
: Bit 5 - Probe response
|
|
: Bit 8 - Beacon
|
|
MASK : MASK = 0 to clear the mask and the IE buffer
|
|
IEBuffer : IE Buffer in hex (max 256 bytes)
|
|
The Buffer should not be space separated.
|
|
|
|
Example:
|
|
./mlanconfig mlan0 customie
|
|
Get IE buffer, subtype mask settings for all indices.
|
|
|
|
./mlanconfig mlan0 customie 1
|
|
Get IE buffer and subtype mask for the Index = 1.
|
|
|
|
./mlanconfig mlan0 customie 2 0
|
|
Clear IE buffer and mask value for Index = 2.
|
|
|
|
./mlanconfig mlan0 customie 3 0x101 0xdd051234567890
|
|
Set IE buffer and mask value for Index = 3.
|
|
|
|
./mlanconfig mlan0 customie -1 0x101 0xdd051234567890
|
|
Append the specified IEBuffer at index with mask value of 0x101.
|
|
|
|
./mlanconfig mlan0 customie -1 0 0xdd051234567890
|
|
Delete the specified IEBuffer from all the IEs.
|
|
|
|
./mlanconfig mlan0 customie 2 0 0xdd051234567890
|
|
Delete the specified IEBuffer from the IEs at index 2.
|
|
|
|
tdls_config
|
|
This command is used to enable/disable TDLS on device.
|
|
|
|
Usage : tdls_config <0/1>
|
|
1: Enable TDLS
|
|
0: Disable TDLS
|
|
tdls_setinfo
|
|
This command is used for setting the capabilities of the TDLS station.
|
|
|
|
Usage : tdls_setinfo <tdls.conf>
|
|
Set capabilities of TDLS station.
|
|
tdls_setup
|
|
This command is used to send TDLS setup request.
|
|
|
|
Usage: tdls_setup <tdls.conf>
|
|
Send TDLS setup request.
|
|
tdls_discovery
|
|
This command is used to request TDLS discovery.
|
|
|
|
Usage : tdls_discovery <tdls.conf>
|
|
Request TDLS discovery.
|
|
tdls_teardown
|
|
This command is used to send TDLS teardown request.
|
|
|
|
Usage : tdls_teardown <tdls.conf>
|
|
Request teardown of TDLS link.
|
|
tdls_powermode
|
|
This command is used to send TDLS powermode request.
|
|
|
|
Usage : tdls_powermode <tdls.conf>
|
|
Send TDLS powermode (either 0:Active, 1:PowerSave) command.
|
|
tdls_channel_switch
|
|
This command is used to send TDLS channel switch request.
|
|
|
|
Usage : tdls_channel_switch <tdls.conf>
|
|
Send TDLS channel switch command.
|
|
tdls_stop_channel_switch
|
|
This command is used to send stop TDLS channel switch request.
|
|
|
|
Usage : tdls_stop_channel_switch <tdls.conf>
|
|
Send stop TDLS channel switch command.
|
|
tdls_cs_params
|
|
This command is used to set TDLS channel switch params
|
|
|
|
Usage : tdls_cs_params <tdls.conf>
|
|
Set TDLS channel switch params.
|
|
tdls_disable_cs
|
|
This command is used to disable TDLS channel switch
|
|
|
|
Usage : tdls_disable_cs <0/1>
|
|
Disable TDLS channel switch.
|
|
tdls_link_status [peer_mac_address]
|
|
This command is used to get link information about TDLS links or
|
|
a TDLS link correponding to peer mac address.
|
|
|
|
Usage : tdls_link_status
|
|
Send TDLS command to get current link status.
|
|
tdls_debug
|
|
This command is used for FW debug functionality and tests.
|
|
|
|
mgmtframetx
|
|
This command is used to send mgmt frame
|
|
|
|
Usage:
|
|
mlanconfig mlanX mgmtframetx <mgmt_frame.conf>
|
|
|
|
===============================================================================
|
|
U S E R M A N U A L F O R DRIVER COMMAND
|
|
|
|
NAME
|
|
DRIVER COMMAND - This command is Marvell private command, it can enable and
|
|
configure Roaming offload and provide the interface between
|
|
between WPA_Supplicant and the Marvell mdriver
|
|
SYNOPSIS
|
|
WPA_CLI: DRIVER SETROAMOFFLOAD data1
|
|
WPA_CLI: DRIVER SETROAMOFFLOAD 0/1/2/3/4/5
|
|
Enable/Disable Roaming offload with different mode:
|
|
data1:
|
|
0 - disable
|
|
1 - enable and wakeup host based on roamOffloadAPlist
|
|
2 - enable and ignore the roamOffloadAPlist
|
|
3 - based on 2, and reconnect with the same BSSID when disconnect during host suspend
|
|
4 - based on 2, and reconnect with the same SSID when disconnect during host suspend
|
|
5 - based 0n 2, no roaming and only reconnect the specific BSSID/SSID when disconnect during host suspend
|
|
|
|
WPA_CLI: DRIVER SETROAMOFFLAPLIST data1 [data2] ......
|
|
WPA_CLI: DRIVER SETROAMOFFLAPLIST xx:xx:xx:xx:xx:xx
|
|
Download roaming offload AP list to Driver:
|
|
xx:xx:xx:xx:xx:xx - the BSSID of AP, one or more than one BSSIDs are allowed.
|
|
|
|
WPA_CLI: DRIVER CFGROAMOFFLOAD [data1 = xx] [data2 = xx] [data3 = xx] [data4 = xx] .....
|
|
WPA_CLI: DRIVER CFGROAMOFFLOAD [BSSID = xx:xx:xx:xx:xx:xx] [SSID = marvell_ap]
|
|
[RETRY_COUNT = 0xff] [MAX_RSSI = 50] [MIN_RSSI=60] [SETP_RSSI = 5] ......
|
|
|
|
Configure Roaming offload:
|
|
Note: all parameters are optional.
|
|
Examples:
|
|
DRIVER CFGROAMOFFLOAD BSSID = 00:50:43:21:30:ca SSID = marvell_ap RETRY_COUNT = 0xff MAX_RSSI = 50
|
|
|
|
===============================================================================
|
|
U S E R M A N U A L F O R M L A N 2 0 4 0 C O E X
|
|
|
|
NAME
|
|
mlan2040coex - This application handles the 11n 20/40 coexistence operation for
|
|
the Marvell mdriver
|
|
|
|
SYNOPSIS
|
|
mlan2040coex [-d <n>] [-i <intfname>] [hvB]
|
|
-d = Device number (n)
|
|
-i = Interface name (intfname)
|
|
-h = Help
|
|
-v = Version
|
|
-B = Run the process in background
|
|
Note: If device number (n) is not present, then 0 assumed.
|
|
If intfname is not present, then mlan0 assumed.
|
|
|
|
===============================================================================
|
|
U S E R M A N U A L F O R MLANEVENT
|
|
|
|
NAME
|
|
mlanevent.exe
|
|
|
|
This tool can be used to listen for and obtain events from the driver
|
|
through the netlink layer.
|
|
|
|
----------------
|
|
Supported events
|
|
----------------
|
|
STA_DEAUTH
|
|
STA_ASSOC
|
|
BSS_START
|
|
BSS_IDLE
|
|
BSS_ACTIVE
|
|
|
|
-----------------
|
|
Details of events
|
|
-----------------
|
|
|
|
STA_DEAUTH
|
|
----------
|
|
For this event, the following information is shown:
|
|
+ Deauthenticated STA MAC address.
|
|
+ Reason for deauthentication.
|
|
|
|
STA_ASSOC
|
|
----------
|
|
For this event, the following information is shown:
|
|
+ STA MAC address.
|
|
|
|
BSS_START
|
|
----------
|
|
For this event, the following information is shown:
|
|
+ AP MAC address.
|
|
|
|
BSS_IDLE
|
|
----------
|
|
For this event, there is no associated information.
|
|
|
|
BSS_ACTIVE
|
|
----------
|
|
For this event, there is no associated information.
|
|
|
|
===============================================================================
|