Driver Bug Fixes:
-----------------
1. WSW-19892: Driver compilation errors on older kernel version
2. WSW-19638: Enable RF Test Mode support for 9098 PCIE and SDIO
3. WCSWREL-370: oob irq request fail on i.MX93 9x9 qsb board
4. WSW-21756: WLAN Driver hang observed during WiFi connect/disconnect
5. WCSWREL-362: merge the L6.0.0 build errors fix patches
6. WSW-22054: STA CSA event is not propagated to cfg80211
7. WSW-21873: STA does not send probes after switching from DFS channel
8. WSW-21530: UDP Tx not able to send ARP when high bandwidth is used
9. WSW-21541: WFA Pre-Cert Channel switch test is failing
10. WSW-21072: AP stops sending CTS-to-Self in mcast Tx after issue mc_aggr_cfg
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Driver Bug Fixes:
-----------------
1. LF-6972: Updated the License to GPL-2.0
2. Incremented the driver version
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
There are many cfg80211 common api and struct changes on next-20220719
kernel tag, which is based on v5.19-rc7 Linus tree tag with the for-next
branch patches on each kernel IP repo, target for v6.0 kernel version.
So need to change the local wifi driver accordingly to avoid the build
errors.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Driver Bug Fixes:
-----------------
1. WCSWREL-352: Fixed WiFi driver kernel panic with "use after free" print
2. WCSWREL-353: Fixed WiFi driver panic when switch AP to another AP
3. WCSWREL-337: merge the L5.18 build errors and warnings fix patches into next wifi release
4. WSW-16518: Fixed STA going to unresponsive state during basic UAPSD operation
5. WSW-19350: Observed "unexpected kernel BRK exception" in STA 2G VHT with BT HID traffic running simultaneously
6. WSW-19640: cannot enable the "20/40 BSS Coexistence Management" support
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Driver Bug Fixes:
-----------------
1. Added GPL/NXP dual license header
2. WCSWREL-242: Fixed system rebooted issue after connecting wifi and running bt A2DP stress
3. WCSWREL-310: merge the L5.17 build errors and warnings related to netif_rx
4. WCSWREL-317: merge the build error and warning fix related to eth_hw_addr_set
5. WSW-19664: Fixed VtsHalWifiV1_0TargetTest failure
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
When build the mxm17322 wifi release based on the latest kernel(L5.17),
will observe the following build warning.
Need to use eth_hw_addr_set function instead of writing the address
directly to net_device::dev_addr. Make sure we don't cast off const
qualifier from dev->dev_addr.
/home/sherry/work/mwifiex/mxm_wifiex/wlan_src/mlinux/moal_uap_cfg80211.c: In function ‘woal_cfg80211_add_mon_if’:
/home/sherry/work/mwifiex/mxm_wifiex/wlan_src/mlinux/moal_uap_cfg80211.c:1485:44: warning: passing argument 2 of ‘moal_memcpy_ext’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
1485 | moal_memcpy_ext(priv->phandle, ndev->dev_addr, ndev->perm_addr,
| ~~~~^~~~~~~~~~
In file included from /home/sherry/work/mwifiex/mxm_wifiex/wlan_src/mlinux/moal_main.h:119,
from /home/sherry/work/mwifiex/mxm_wifiex/wlan_src/mlinux/moal_cfg80211.h:26,
from /home/sherry/work/mwifiex/mxm_wifiex/wlan_src/mlinux/moal_uap_cfg80211.c:23:
/home/sherry/work/mwifiex/mxm_wifiex/wlan_src/mlinux/moal_shim.h:82:48: note: expected ‘t_void *’ {aka ‘void *’} but argument is of type ‘const unsigned char *’
82 | t_void *moal_memcpy_ext(t_void *pmoal, t_void *pdest, const t_void *psrc,
| ~~~~~~~~^~~~~
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
New Additions/Removals/Improvements:
------------------------------------
1. WSW-18868: Improve FW download time after suspend/resume cycle
2. WSFD-484: WIFI 6E support
3. WSW-17954: Enable turbo mode command for mlanutl
4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant
5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl
6. WSW-16429: Disabling of WEP/TKIP on all V16 devices
7. Use CFG80211_VERSION_CODE to control cfg80211 related code
8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3
9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup
Driver Bug Fixes:
-----------------
1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS)
2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf
3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test
4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode
5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery
6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime
7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing
8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE
9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive
10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request
11. WCSWREL-266: Fix L5.16 build errors and warnings
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
changes:
1. WSW-18043: Include txpwrlimit_cfg_iw416 files on MM driver
2. WSW-18325: Rename ed_mac_ctrl conf files from V3 to V2
3. WSW-16931: Observing timeout on STAUT with UL OFDMA BSR scenario
4. WCSWREL-227: Fixed the issue of CtsWifiTestCases case android.net.wifi.cts.WifiManagerTest#testTrafficStateCallback
5. WSW-17727: Fixed the issue of STA Connection failed with dmcs enable and host_mlme=1
6. WSW-17450: Fixed the issue of android.net.wifi.cts.WifiManagerTest failure
7. WSW-17491: Fixed the issue of android.cts.statsdatom.wifi.WifiStatsTests failure
8. WSW-18006: Set CAC period of 600 sec for weather channel for ETSI region
9. WSW-17906: Fixed the issue of APUT not advertise the support of MCS32
10. WSW-17575: Fixed the issue of Host cannot wake-up by ping during Hostsleep
11. WSW-17904: Fixed the issue of STAUT advertising VHT Tx/Rx MCS as 1SS when associating with 1SS AP
12. WSW-17427: Fixed the issue of uAPUTL failing to start BSS and returns "Core Dumped" error message
13. WSW-15856: Hotspot is turning off automatically after few minutes ~10mins with one client connected
14. WCSWREL-211: System reboot when switch wifi hotspot security mode from WPA2 to none
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Approved-by: Tian Yang <yang.tian@nxp.com>
changes:
1. WCSWREL-199: Fixed the build error on kernel higher than L5.12
2. WSW-16639: Improve the throughput by avoiding skb copy in amsdu deaggreation
3. WSW-15903: By default enabled pmqos=1 module param on IMX8 only and disable this for other platforms like X86
4. WSFD-411: Generate fw_dump files in HAL layer instead of driver
5. WSW-17154: Fixed the issue of driver crash seen with AGO+AGO restart stress test
6. WSFD-416: Added WPA3 R3 support using embedded supplicant
7. WSW-16171: Fixed the issue of DUT failed to roam to other AP2, when low RSSI hits on connected AP1
8. WSW-17323: Fixed the issue of not activating Channel 13 using DE or JP country codes
9. WSW-16630: APUT is not switching back from 20/40MHz to 20MHz channel bandwidth in the presence of 20MHz testbed AP
10. WCECCB-37: Added support for UNII-4 / upper 5 GHz channels
11. WSW-17368: Fixed the issue of System shutdown after switching AC power to battery
12. WSW-17447: Added RTT support enablement for Android
13. WSW-17453: Fixed the issue of 0x107 Command timeout for scan(iwlist)
14. WSW-17019: Fixed the issue of Wifi hang with timeout cmd id 0x20 due to interference from another device doing DPD
15. WSW-14: Added Support for IMX Linux Kernel 5.15.0
16. WSW-17450: Disable host based Link layer stats so that fw based stats will be used
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Approved-by: Tian Yang <yang.tian@nxp.com>
The parameters in cfg80211_unregister_netdevice function is wrong, will
cause the build error on kernel higher than L5.12.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Approved-by: Tian Yang <yang.tian@nxp.com>
changes:
1. WCSWREL-191: Fixed the error when loading module param from user config for SD8801
2. WCSWREL-186: Fixed the issue of mlanutl failing on kernel higher than L5.15
3. Fixed low throughput issue for WPA3 SAE
4. Added driver change for WLAN throughput improvement on 8997 SoC
5. Updated README to recommend not to use WEP/TKIP for all chipsets
6. WCSWREL-180: Fix P2P test fail on kernel higher than L5.12
7. WCSWREL-156: kernel_write/kernel_read not allowed by drivers for L5.10 kernel GKI buildou
8. Alternative for pm_qos_add_request/pm_qos_remove_request
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Approved-by: Tian Yang <yang.tian@nxp.com>
P2P test will fail(deadlock) on kernel higher than L5.12,
error log like below:
root@imx8mmevk:~# wpa_cli -i p2p0 p2p_group_add freq=2412
[ 47.284346] Add virtual interface p2p-p2p0-0
'P2P_GROUP_ADD freq=2412' command timed out.
This is because the upgarded kernel change the netdevs
registration/unregistration semantics, new kernel require the drivers
to call cfg80211_(un)register_netdevice() when this is happening due to
a cfg80211 request.
For more details, please refer to the upstream patch:
https://lore.kernel.org/linux-wireless/20210122161942.cf2f4b65e4e9.Ida8234e50da13eb675b557bac52a713ad4eddf71@changeid/
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Approved-by: Tian Yang <yang.tian@nxp.com>
changes:
1. WCSWREL-126: Fixed PCIE9098 suspend fail on imx8mq.
2. WCSWREL-87: Hostsleep fails as DUT doesnot wake up on traffic/pattern.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Approved-by: Tian Yang <yang.tian@nxp.com>
changes:
1. Added support for PCIE-UART W9098 SoC
2. Added support for SDIO-UART W8997 SoC
3. Added a new RF Test Mode command
4. Added txratecfg and 11axcfg related commands to mlanutl light to
support pre-cert testing
5. Added cpu_latency_qos_add/remove_request calls for L5.10 for better
CPU performance during throughput tests
6. Added fixes for MBO Pre-Cert failure
7. Fixed Copyright header start date, end date
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: yang.tian <yang.tian@nxp.com>
changes:
1. Added support for IMX Linux Kernel version 5.10
2. LF 5.10 need to be build out of tree
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: yang.tian <yang.tian@nxp.com>