changes:
1. WCSWREL-199: Fixed the build error on kernel higher than L5.12
2. WSW-16639: Improve the throughput by avoiding skb copy in amsdu deaggreation
3. WSW-15903: By default enabled pmqos=1 module param on IMX8 only and disable this for other platforms like X86
4. WSFD-411: Generate fw_dump files in HAL layer instead of driver
5. WSW-17154: Fixed the issue of driver crash seen with AGO+AGO restart stress test
6. WSFD-416: Added WPA3 R3 support using embedded supplicant
7. WSW-16171: Fixed the issue of DUT failed to roam to other AP2, when low RSSI hits on connected AP1
8. WSW-17323: Fixed the issue of not activating Channel 13 using DE or JP country codes
9. WSW-16630: APUT is not switching back from 20/40MHz to 20MHz channel bandwidth in the presence of 20MHz testbed AP
10. WCECCB-37: Added support for UNII-4 / upper 5 GHz channels
11. WSW-17368: Fixed the issue of System shutdown after switching AC power to battery
12. WSW-17447: Added RTT support enablement for Android
13. WSW-17453: Fixed the issue of 0x107 Command timeout for scan(iwlist)
14. WSW-17019: Fixed the issue of Wifi hang with timeout cmd id 0x20 due to interference from another device doing DPD
15. WSW-14: Added Support for IMX Linux Kernel 5.15.0
16. WSW-17450: Disable host based Link layer stats so that fw based stats will be used
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Approved-by: Tian Yang <yang.tian@nxp.com>
changes:
1. WCSWREL-191: Fixed the error when loading module param from user config for SD8801
2. WCSWREL-186: Fixed the issue of mlanutl failing on kernel higher than L5.15
3. Fixed low throughput issue for WPA3 SAE
4. Added driver change for WLAN throughput improvement on 8997 SoC
5. Updated README to recommend not to use WEP/TKIP for all chipsets
6. WCSWREL-180: Fix P2P test fail on kernel higher than L5.12
7. WCSWREL-156: kernel_write/kernel_read not allowed by drivers for L5.10 kernel GKI buildou
8. Alternative for pm_qos_add_request/pm_qos_remove_request
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Approved-by: Tian Yang <yang.tian@nxp.com>
When use mlanutl on L5.15, will meet below error logs:
root@imx8mqevk:/usr/share/nxp_wireless# ./mlanutl mlan0 hssetpara 2 0xff 0xc8 3 400
mlanutl: Operation not supported
mlanutl: hssetpara fail
This is due to the net common api change the ndo_do_ioctl behavior, it
splits out all the users of SIOCDEVPRIVATE ioctls into a separate
ndo_siocdevprivate callback. All the ioctl functions through
SIOCDEVPRIVATE in mlanutl.c will fail if not follow this upstream api
change. So here change to use new ndo_siocdevprivate instead of
ndo_do_ioctl on L5.15.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Approved-by: Tian Yang <yang.tian@nxp.com>
changes:
1. Added support for PCIE-UART W9098 SoC
2. Added support for SDIO-UART W8997 SoC
3. Added a new RF Test Mode command
4. Added txratecfg and 11axcfg related commands to mlanutl light to
support pre-cert testing
5. Added cpu_latency_qos_add/remove_request calls for L5.10 for better
CPU performance during throughput tests
6. Added fixes for MBO Pre-Cert failure
7. Fixed Copyright header start date, end date
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: yang.tian <yang.tian@nxp.com>
changes:
1. Added support for IMX Linux Kernel version 5.10
2. LF 5.10 need to be build out of tree
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: yang.tian <yang.tian@nxp.com>
