changes:
1. WCSWREL-199: Fixed the build error on kernel higher than L5.12
2. WSW-16639: Improve the throughput by avoiding skb copy in amsdu deaggreation
3. WSW-15903: By default enabled pmqos=1 module param on IMX8 only and disable this for other platforms like X86
4. WSFD-411: Generate fw_dump files in HAL layer instead of driver
5. WSW-17154: Fixed the issue of driver crash seen with AGO+AGO restart stress test
6. WSFD-416: Added WPA3 R3 support using embedded supplicant
7. WSW-16171: Fixed the issue of DUT failed to roam to other AP2, when low RSSI hits on connected AP1
8. WSW-17323: Fixed the issue of not activating Channel 13 using DE or JP country codes
9. WSW-16630: APUT is not switching back from 20/40MHz to 20MHz channel bandwidth in the presence of 20MHz testbed AP
10. WCECCB-37: Added support for UNII-4 / upper 5 GHz channels
11. WSW-17368: Fixed the issue of System shutdown after switching AC power to battery
12. WSW-17447: Added RTT support enablement for Android
13. WSW-17453: Fixed the issue of 0x107 Command timeout for scan(iwlist)
14. WSW-17019: Fixed the issue of Wifi hang with timeout cmd id 0x20 due to interference from another device doing DPD
15. WSW-14: Added Support for IMX Linux Kernel 5.15.0
16. WSW-17450: Disable host based Link layer stats so that fw based stats will be used
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Approved-by: Tian Yang <yang.tian@nxp.com>
The parameters in cfg80211_unregister_netdevice function is wrong, will
cause the build error on kernel higher than L5.12.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Approved-by: Tian Yang <yang.tian@nxp.com>
changes:
1. WCSWREL-191: Fixed the error when loading module param from user config for SD8801
2. WCSWREL-186: Fixed the issue of mlanutl failing on kernel higher than L5.15
3. Fixed low throughput issue for WPA3 SAE
4. Added driver change for WLAN throughput improvement on 8997 SoC
5. Updated README to recommend not to use WEP/TKIP for all chipsets
6. WCSWREL-180: Fix P2P test fail on kernel higher than L5.12
7. WCSWREL-156: kernel_write/kernel_read not allowed by drivers for L5.10 kernel GKI buildou
8. Alternative for pm_qos_add_request/pm_qos_remove_request
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Approved-by: Tian Yang <yang.tian@nxp.com>
P2P test will fail(deadlock) on kernel higher than L5.12,
error log like below:
root@imx8mmevk:~# wpa_cli -i p2p0 p2p_group_add freq=2412
[ 47.284346] Add virtual interface p2p-p2p0-0
'P2P_GROUP_ADD freq=2412' command timed out.
This is because the upgarded kernel change the netdevs
registration/unregistration semantics, new kernel require the drivers
to call cfg80211_(un)register_netdevice() when this is happening due to
a cfg80211 request.
For more details, please refer to the upstream patch:
https://lore.kernel.org/linux-wireless/20210122161942.cf2f4b65e4e9.Ida8234e50da13eb675b557bac52a713ad4eddf71@changeid/
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Approved-by: Tian Yang <yang.tian@nxp.com>
changes:
1. WCSWREL-126: Fixed PCIE9098 suspend fail on imx8mq.
2. WCSWREL-87: Hostsleep fails as DUT doesnot wake up on traffic/pattern.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Approved-by: Tian Yang <yang.tian@nxp.com>
changes:
1. Added support for PCIE-UART W9098 SoC
2. Added support for SDIO-UART W8997 SoC
3. Added a new RF Test Mode command
4. Added txratecfg and 11axcfg related commands to mlanutl light to
support pre-cert testing
5. Added cpu_latency_qos_add/remove_request calls for L5.10 for better
CPU performance during throughput tests
6. Added fixes for MBO Pre-Cert failure
7. Fixed Copyright header start date, end date
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: yang.tian <yang.tian@nxp.com>
changes:
1. Added support for IMX Linux Kernel version 5.10
2. LF 5.10 need to be build out of tree
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: yang.tian <yang.tian@nxp.com>
