mochabin/mwifiex
1
0
Fork 0
mirror of https://github.com/nxp-imx/mwifiex.git synced 2024-11-14 11:05:34 +00:00
Code Issues Projects Releases Packages Wiki Activity

mxm_wifiex: update to mxm5x17266.p2 release

Browse source 
changes:
1. Remove unsupported commands and info from README_MLAN.
2. Improved the 8997 SDIO TCP Tx throughput.
3. 0x10c Command Timeout during p2p_connect

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
This commit is contained in:
Sherry Sun 2021-08-26 10:38:25 +08:00 committed by yang.tian
parent 86bce10ecf
commit b879ca79c3
8 changed files with 76 additions and 44 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

41
mxm_wifiex/wlan_src/README_MLAN
View file

@ -60,9 +60,6 @@
hw_test=0|1 <Disable hardware test (default) | Enable hardware test>
fw_serial=0|1 <support parallel download FW | support serial download FW (default)>
req_fw_nowait=0|1 <use request_firmware API (default) | use request_firmware_nowait API>
dfs53cfg=0|1|2 <use Fw Default | New W53 | Old W53>
SD8887: antcfg=0|1|2|0xffff <default | Tx/Rx antenna 1 | Tx/Rx antenna 2 | enable antenna diversity>
SD8897/SD8997: antcfg=0x11|0x13|0x33 <Bit0:Rx Path A, Bit1:Rx Path B, Bit 4:Tx Path A, Bit 5:Tx Path B>
slew_rate: Slew Rate Control value = 0|1|2|3 (0 is the slowest slew rate and 03 has the highest slew rate (default))
init_cfg=<init config (MAC addresses, registers etc.) file name>
e.g. copy init_cfg.conf to firmware directory, init_cfg=nxp/init_cfg.conf
@ -99,7 +96,6 @@
pcie_int_mode=0|1|2 <Legacy mode, MSI mode (default), MSI-X mode>
pcie_int_mode=0|1 <Legacy mode, MSI mode (default)>
ring_size=32|64|128|256|512 <adma ring size for 9097/9098>
aggrctrl=1|0 <enable Tx aggr | disable Tx aggr>
usb_aggr=0|1|2 <use MLAN default (disabled) | enable USB aggr | disable USB aggr>
low_power_mode_enable=0|1 <disable low power mode (default)| enable low power mode>
When low power mode is enabled, the output power will be clipped at ~+10dBm and the
@ -257,21 +253,6 @@
hs_skip_count = <number of skipped suspends>
hs_force_count = <number of forced suspends>
Issue SDIO cmd52 read/write through proc.
Usage:
echo "sdcmd52rw=<func> <reg> [data]" > /proc/mwlan/adapterX/config
where the parameters:
func: The function number to use (0-7)
reg: The address of the register
data: The value to write, read if the value is absent
For SDIO MMC driver, only function 0 and WLAN function access is allowed.
And there is a limitation for function 0 write, only vendor specific CCCR
registers (0xf0 -0xff) are permiited.
Examples:
echo "sdcmd52rw= 0 4" > /proc/mwlan/adapterX/config # read func 0 address 4
cat /proc/mwlan/adapterX/config # display the register value
echo "sdcmd52rw= 1 3 0xf" > /proc/mwlan/adapterX/config # write 0xf to func 1 address 3
Issue debug_dump command through proc.
Usage:
echo "debug_dump" > /proc/mwlan/adapterX/config
@ -1326,8 +1307,20 @@ hssetpara
mlanutl mlanX hssetpara condition [GPIO# [gap]] (optional)[type ind_GPIO# [level]] (optional)[type event_force_ignore event_use_ext_gap ext_gap [gpio_wave]] (optional)[type hs_wakeup_interval]
This command takes one (condition), two (condition and GPIO#) or three
(condition, GPIO# and gap).If more than three parameters, it can set different or multiple features indicating by type and
the detailed usage is the same as hscfg above.
(condition, GPIO# and gap).If more than three parameters, it can set different or multiple features indicating by type.
If type=1, it will set indication gpio and its level. And the parameter format will be (condition, GPIO#,gap and type,ind_GPIO#) or
(condition, GPIO#, gap, type, ind_GPIO# and level).
If type=2, it will set extend host sleep wakup method. And the parameter format will be (condition, GPIO#, gap, type, force_ignore,
use_ext_gap, ext_gap [gpio_wave]). gpio_wave parameter is optional and default value is 0(falling edge). Each bit of
event_force_ignore and event_use_ext_gap will be defined to one same event, and set one same event(same bit) in those two
parameters is not allowed. Set bit(s) in event_force_ignore means the event(s) will be forced ignore in firmware silently.
Set bit(s) in event_use_ext_gap mean the event(s) will use extend gap to inform host. Not set means not handle.
If type=3, it will set hs_wakeup_interval.
If no parameter provided, get is performed.
where Condition is:
bit 0 = 1 -- broadcast data
@ -1372,7 +1365,7 @@ hssetpara
where ext_gap is the extend gap based on third parameter Gap. Only valid when use_ext_gap is used.
The total gap is (Gap + (x+1)*ext_gap). x means the bit number(start from 0) of this reason in use_ext_gap.
where gpio_wave is used to set GPIO wave level for hscfg extend. 0 means falling edge, 1 means rising edge.
where gpio_wave is used to set GPIO wave level for host sleep extend. 0 means falling edge, 1 means rising edge.
This parameter is optional and default value is 0.
where hs_wakeup_interval is used to set host sleep wakeup interval and the type must set to 3 to indicate
@ -1410,7 +1403,7 @@ hssetpara
mlanutl mlan0 hssetpara 2 1 0xa0 2 0 0x1 10 1: Unicast data
Use GPIO 1
Gap 160 ms
type=2 to set extend hscfg feature
type=2 to set extend host sleep feature
Force_ignore not used
Disconnect will use extend gap to indicate host
Use gap 170.
@ -1418,7 +1411,7 @@ hssetpara
mlanutl mlan0 hssetpara 2 1 0xa0 2 0x1 0 0 0: Unicast data
Use GPIO 1
Gap 160 ms
type=2 to set extend hscfg feature
type=2 to set extend host sleep feature
Falling edge
Force ignore Disconnect
Extend gap not used

10
mxm_wifiex/wlan_src/mlan/mlan_cmdevt.c
View file

@ -972,7 +972,11 @@ static t_u16 wlan_get_cmd_timeout(t_u16 cmd_id)
case HOST_CMD_APCMD_STA_DEAUTH:
#endif
case HostCMD_APCMD_ACS_SCAN:
#ifdef IMX_SUPPORT
timeout = MRVDRV_TIMER_10S;
#else
timeout = MRVDRV_TIMER_5S;
#endif
break;
default:
#ifdef IMX_SUPPORT
@ -981,13 +985,13 @@ static t_u16 wlan_get_cmd_timeout(t_u16 cmd_id)
* timeout are observed for commands like 0x5e, 0x16, 0xd1.
* Observed that response has come just after default timeout of
* 2 seconds for these commands. This random timeout is not
* observed when the default timeout is increased to 5 seconds
* (As an work around, Increase the default timeout to 5
* observed when the default timeout is increased to 10 seconds
* (As an work around, Increase the default timeout to 10
* seconds. Need to further debug exact reason for delay in cmd
* responses)
*
*/
timeout = MRVDRV_TIMER_1S * 5;
timeout = MRVDRV_TIMER_10S;
#else
timeout = MRVDRV_TIMER_1S * 2;
#endif

6
mxm_wifiex/wlan_src/mlan/mlan_decl.h
View file

@ -24,7 +24,7 @@
#define _MLAN_DECL_H_
/** MLAN release version */
#define MLAN_RELEASE_VERSION "266"
#define MLAN_RELEASE_VERSION "266.p2"
/** Re-define generic data types for MLAN/MOAL */
/** Signed char (1-byte) */
@ -435,8 +435,8 @@ typedef t_u8 mlan_802_11_mac_addr[MLAN_MAC_ADDR_LENGTH];
#define CARD_SD9098 "SD9098"
/** SD9177 Card */
#define CARD_SD9177 "SD9177"
/** SD9177 Card */
#define CARD_SD8801 "SD9177"
/** SD8801 Card */
#define CARD_SD8801 "SD8801"
#endif
#ifdef PCIE

2
mxm_wifiex/wlan_src/mlan/mlan_pcie.c
View file

@ -2581,7 +2581,7 @@ static void mlan_delay_for_sleep_cookie(mlan_adapter *pmadapter,
}
if (count >= max_delay_loop_cnt)
PRINTM(MERROR, "sleep cookie not found!!\n");
PRINTM(MINFO, "sleep cookie not found!!\n");
}
#endif

6
mxm_wifiex/wlan_src/mlinux/mlan_decl.h
View file

@ -24,7 +24,7 @@
#define _MLAN_DECL_H_
/** MLAN release version */
#define MLAN_RELEASE_VERSION "266"
#define MLAN_RELEASE_VERSION "266.p2"
/** Re-define generic data types for MLAN/MOAL */
/** Signed char (1-byte) */
@ -435,8 +435,8 @@ typedef t_u8 mlan_802_11_mac_addr[MLAN_MAC_ADDR_LENGTH];
#define CARD_SD9098 "SD9098"
/** SD9177 Card */
#define CARD_SD9177 "SD9177"
/** SD9177 Card */
#define CARD_SD8801 "SD9177"
/** SD8801 Card */
#define CARD_SD8801 "SD8801"
#endif
#ifdef PCIE

26
mxm_wifiex/wlan_src/mlinux/moal_init.c
View file

@ -115,6 +115,7 @@ static int slew_rate = 3;
#endif
int tx_work = 0;
static int rps = 0;
static int tx_skb_clone = 0;
#if defined(STA_SUPPORT)
/** 802.11d configuration */
@ -1096,6 +1097,19 @@ static mlan_status parse_cfg_read_block(t_u8 *data, t_u32 size,
PRINTM(MMSG, "rps %s\n",
moal_extflg_isset(handle, EXT_RPS) ? "on" :
"off");
} else if (strncmp(line, "tx_skb_clone",
strlen("tx_skb_clone")) == 0) {
if (parse_line_read_int(line, &out_data) !=
MLAN_STATUS_SUCCESS)
goto err;
if (out_data)
moal_extflg_set(handle, EXT_TX_SKB_CLONE);
else
moal_extflg_clear(handle, EXT_TX_SKB_CLONE);
PRINTM(MMSG, "tx_skb_clone %s\n",
moal_extflg_isset(handle, EXT_TX_SKB_CLONE) ?
"on" :
"off");
}
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
else if (strncmp(line, "dfs_offload", strlen("dfs_offload")) ==
@ -1442,6 +1456,8 @@ static void woal_setup_module_param(moal_handle *handle, moal_mod_para *params)
moal_extflg_set(handle, EXT_TX_WORK);
if (rps)
moal_extflg_set(handle, EXT_RPS);
if (tx_skb_clone)
moal_extflg_set(handle, EXT_TX_SKB_CLONE);
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
if (dfs_offload)
@ -1660,6 +1676,12 @@ void woal_init_from_dev_tree(void)
PRINTM(MIOCTL, "rps=0x%x\n", data);
rps = data;
}
} else if (!strncmp(prop->name, "tx_skb_clone",
strlen("tx_skb_clone"))) {
if (!of_property_read_u32(dt_node, prop->name, &data)) {
PRINTM(MIOCTL, "tx_skb_clone=0x%x\n", data);
tx_skb_clone = data;
}
}
#ifdef MFG_CMD_SUPPORT
else if (!strncmp(prop->name, "mfg_mode", strlen("mfg_mode"))) {
@ -2201,6 +2223,10 @@ module_param(tx_work, uint, 0660);
MODULE_PARM_DESC(tx_work, "1: Enable tx_work; 0: Disable tx_work");
module_param(rps, uint, 0660);
MODULE_PARM_DESC(rps, "1: Enable rps; 0: Disable rps");
module_param(tx_skb_clone, uint, 0660);
MODULE_PARM_DESC(tx_skb_clone,
"1: Enable tx_skb_clone; 0: Disable tx_skb_clone");
module_param(dpd_data_cfg, charp, 0);
MODULE_PARM_DESC(dpd_data_cfg, "DPD data file name");
module_param(init_cfg, charp, 0);

28
mxm_wifiex/wlan_src/mlinux/moal_main.c
View file

@ -3027,9 +3027,8 @@ static mlan_status woal_req_dpd_data(moal_handle *handle,
if (req_fw_nowait) {
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 13, 0)
if ((request_firmware_nowait(
THIS_MODULE, FW_ACTION_UEVENT,
dpd_data_cfg, handle->hotplug_device,
GFP_KERNEL, handle,
THIS_MODULE, FW_ACTION_UEVENT, dpd_data_cfg,
handle->hotplug_device, GFP_KERNEL, handle,
woal_request_init_dpd_conf_callback)) < 0) {
#else
#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 32)
@ -3190,9 +3189,8 @@ static mlan_status woal_req_cal_data(moal_handle *handle,
if (req_fw_nowait) {
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 13, 0)
if ((request_firmware_nowait(
THIS_MODULE, FW_ACTION_UEVENT,
cal_data_cfg, handle->hotplug_device,
GFP_KERNEL, handle,
THIS_MODULE, FW_ACTION_UEVENT, cal_data_cfg,
handle->hotplug_device, GFP_KERNEL, handle,
woal_request_init_user_conf_callback)) <
0) {
#else
@ -5815,15 +5813,17 @@ static int woal_start_xmit(moal_private *priv, struct sk_buff *skb)
// kernel crash with cloned skb without copy
// uap0 <-->muap0 bridge
/* STA role need skb copy to improve throughput.but uAP unicast not */
if ((skb->cloned && priv->bss_role == MLAN_BSS_ROLE_STA) ||
if ((moal_extflg_isset(priv->phandle, EXT_TX_SKB_CLONE)) ||
(skb->cloned && priv->bss_role == MLAN_BSS_ROLE_STA) ||
(skb->cloned && priv->bss_role == MLAN_BSS_ROLE_UAP &&
(!is_unicast_ether_addr(((struct ethhdr *)skb->data)->h_dest))) ||
(skb_headroom(skb) <
(MLAN_MIN_DATA_HEADER_LEN + sizeof(mlan_buffer) +
priv->extra_tx_head_len))) {
PRINTM(MWARN,
"Tx: skb cloned %d or Insufficient skb headroom %d\n",
skb->cloned, skb_headroom(skb));
PRINTM(MINFO,
"Tx: skb cloned %d skb headroom %d tx_skb_clone=%d \n",
skb->cloned, skb_headroom(skb),
moal_extflg_isset(priv->phandle, EXT_TX_SKB_CLONE));
/* Insufficient skb headroom - allocate a new skb */
new_skb = skb_realloc_headroom(
skb, MLAN_MIN_DATA_HEADER_LEN + sizeof(mlan_buffer) +
@ -9083,6 +9083,14 @@ moal_handle *woal_add_card(void *card, struct device *dev, moal_if_ops *if_ops,
/* Init module parameters */
woal_init_module_param(handle);
#ifdef IMX_SUPPORT
#ifdef SDIO
if (IS_SD(handle->card_type)) {
moal_extflg_set(handle, EXT_TX_WORK);
moal_extflg_set(handle, EXT_TX_SKB_CLONE);
}
#endif
#endif
if (handle->params.mac_addr
#ifdef MFG_CMD_SUPPORT

1
mxm_wifiex/wlan_src/mlinux/moal_main.h
View file

@ -1693,6 +1693,7 @@ enum ext_mod_params {
#endif
EXT_TX_WORK,
EXT_RPS,
EXT_TX_SKB_CLONE,
EXT_MAX_PARAM,
};