mwifiex/mxm_wifiex/wlan_src/mlinux/moal_shim.c

4492 lines
126 KiB
C
Raw Normal View History

/** @file moal_shim.c
*
* @brief This file contains the callback functions registered to MLAN
*
*
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
* Copyright 2008-2022 NXP
*
* This software file (the File) is distributed by NXP
* under the terms of the GNU General Public License Version 2, June 1991
* (the License). You may use, redistribute and/or modify the File in
* accordance with the terms and conditions of the License, a copy of which
* is available by writing to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
* worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
*
* THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
* this warranty disclaimer.
*
*/
/********************************************************
Change log:
10/21/2008: initial version
********************************************************/
#include "moal_main.h"
#ifdef USB
#include "moal_usb.h"
#endif
#ifdef SDIO
#include "moal_sdio.h"
#endif
#ifdef PCIE
#include "moal_pcie.h"
#endif
#ifdef UAP_SUPPORT
#include "moal_uap.h"
#endif
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
#include "moal_cfg80211.h"
#include "moal_cfg80211_util.h"
#endif
#include <asm/div64.h>
#if defined(PCIE) || defined(SDIO)
#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 4, 70)
#ifdef IMX_SUPPORT
#include <linux/busfreq-imx.h>
#endif
#endif
#include <linux/etherdevice.h>
#endif /*defined(PCIE) || defined(SDIO)*/
/********************************************************
Local Variables
********************************************************/
/** moal_lock */
typedef struct _moal_lock {
/** Lock */
spinlock_t lock;
/** Flags */
unsigned long flags;
} moal_lock;
/********************************************************
Global Variables
********************************************************/
extern int wifi_status;
/********************************************************
Local Functions
********************************************************/
/********************************************************
Global Functions
********************************************************/
/**
* @brief Alloc a buffer
*
* @param pmoal Pointer to the MOAL context
* @param size The size of the buffer to be allocated
* @param flag The type of the buffer to be allocated
* @param ppbuf Pointer to a buffer location to store buffer pointer
* allocated
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_malloc(t_void *pmoal, t_u32 size, t_u32 flag, t_u8 **ppbuf)
{
moal_handle *handle = (moal_handle *)pmoal;
gfp_t mem_flag = (in_interrupt() || in_atomic() || irqs_disabled()) ?
GFP_ATOMIC :
GFP_KERNEL;
if (flag & MLAN_MEM_FLAG_ATOMIC)
mem_flag = GFP_ATOMIC;
#ifdef USB
if (!IS_USB(handle->card_type))
#endif
{
if (flag & MLAN_MEM_DMA)
mem_flag |= GFP_DMA;
}
*ppbuf = kzalloc(size, mem_flag);
if (*ppbuf == NULL) {
PRINTM(MERROR, "%s: allocate memory (%d bytes) failed!\n",
__func__, (int)size);
return MLAN_STATUS_FAILURE;
}
atomic_inc(&handle->malloc_count);
return MLAN_STATUS_SUCCESS;
}
/**
* @brief Free a buffer
*
* @param pmoal Pointer to the MOAL context
* @param pbuf Pointer to the buffer to be freed
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_mfree(t_void *pmoal, t_u8 *pbuf)
{
moal_handle *handle = (moal_handle *)pmoal;
if (!pbuf)
return MLAN_STATUS_FAILURE;
kfree(pbuf);
atomic_dec(&handle->malloc_count);
return MLAN_STATUS_SUCCESS;
}
/**
* @brief Alloc a vitual-address-continuous buffer
*
* @param pmoal Pointer to the MOAL context
* @param size The size of the buffer to be allocated
* @param ppbuf Pointer to a buffer location to store buffer pointer
* allocated
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_vmalloc(t_void *pmoal, t_u32 size, t_u8 **ppbuf)
{
moal_handle *handle = (moal_handle *)pmoal;
*ppbuf = vmalloc(size);
if (*ppbuf == NULL) {
PRINTM(MERROR, "%s: vmalloc (%d bytes) failed!", __func__,
(int)size);
return MLAN_STATUS_FAILURE;
}
atomic_inc(&handle->vmalloc_count);
return MLAN_STATUS_SUCCESS;
}
/**
* @brief Free a buffer allocated by vmalloc
*
* @param pmoal Pointer to the MOAL context
* @param pbuf Pointer to the buffer to be freed
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_vfree(t_void *pmoal, t_u8 *pbuf)
{
moal_handle *handle = (moal_handle *)pmoal;
if (!pbuf)
return MLAN_STATUS_FAILURE;
vfree(pbuf);
atomic_dec(&handle->vmalloc_count);
return MLAN_STATUS_SUCCESS;
}
#ifdef PCIE
/**
* @brief Alloc a consistent block of memory
*
* @param pmoal Pointer to the MOAL context
* @param size The size of the buffer to be allocated
* @param ppbuf Pointer to a buffer location to store memory allocated
* @param pbuf_pa Pointer to a buffer location to store physical address
* of above memory
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_malloc_consistent(t_void *pmoal, t_u32 size, t_u8 **ppbuf,
t_pu64 pbuf_pa)
{
moal_handle *handle = (moal_handle *)pmoal;
pcie_service_card *card = (pcie_service_card *)handle->card;
dma_addr_t dma;
*pbuf_pa = 0;
if (!card)
return MLAN_STATUS_FAILURE;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 18, 0)
*ppbuf = (t_u8 *)dma_alloc_coherent(&card->dev->dev, size,
(dma_addr_t *)&dma, GFP_KERNEL);
#else
*ppbuf = (t_u8 *)pci_alloc_consistent(card->dev, size,
(dma_addr_t *)&dma);
#endif
if (*ppbuf == NULL) {
PRINTM(MERROR,
"%s: allocate consistent memory (%d bytes) failed!\n",
__func__, (int)size);
return MLAN_STATUS_FAILURE;
}
*pbuf_pa = (t_u64)dma;
atomic_inc(&handle->malloc_cons_count);
return MLAN_STATUS_SUCCESS;
}
/**
* @brief Free a consistent block of memory
*
* @param pmoal Pointer to the MOAL context
* @param size Size of them memory to be freed
* @param pbuf Pointer to the memory to be freed
* @param buf_pa Physical address of the memory to be freed
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_mfree_consistent(t_void *pmoal, t_u32 size, t_u8 *pbuf,
t_u64 buf_pa)
{
moal_handle *handle = (moal_handle *)pmoal;
pcie_service_card *card = handle->card;
if (!pbuf || !card)
return MLAN_STATUS_FAILURE;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 18, 0)
dma_free_coherent(&card->dev->dev, size, pbuf, buf_pa);
#else
pci_free_consistent(card->dev, size, pbuf, buf_pa);
#endif
atomic_dec(&handle->malloc_cons_count);
return MLAN_STATUS_SUCCESS;
}
/**
* @brief Map a block of memory to device
*
* @param pmoal Pointer to the MOAL context
* @param pbuf Pointer to the buffer to be mapped
* @param pbuf_pa Pointer to store the physical address of buffer
* @param size Size of the buffer to be mapped
* @param flag Flags for mapping IO
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_map_memory(t_void *pmoal, t_u8 *pbuf, t_u64 *pbuf_pa,
t_u32 size, t_u32 flag)
{
moal_handle *handle = (moal_handle *)pmoal;
pcie_service_card *card = (pcie_service_card *)handle->card;
dma_addr_t dma;
if (!card)
return MLAN_STATUS_FAILURE;
/* Init memory to device */
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 18, 0)
dma = dma_map_single(&card->dev->dev, pbuf, size, flag);
if (dma_mapping_error(&card->dev->dev, dma)) {
#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
dma = pci_map_single(card->dev, pbuf, size, flag);
if (pci_dma_mapping_error(card->dev, dma)) {
#else
dma = pci_map_single(card->dev, pbuf, size, flag);
if (pci_dma_mapping_error(dma)) {
#endif
PRINTM(MERROR, "Tx ring: failed to dma_map_single\n");
return MLAN_STATUS_FAILURE;
}
*pbuf_pa = dma;
return MLAN_STATUS_SUCCESS;
}
/**
* @brief Unmap a block of memory from device
*
* @param pmoal Pointer to the MOAL context
* @param pbuf Pointer to the buffer to unmap
* @param buf_pa Physical address of buffer to unmap
* @param size Size of the buffer to unmap
* @param flag Flags for mapping IO
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_unmap_memory(t_void *pmoal, t_u8 *pbuf, t_u64 buf_pa,
t_u32 size, t_u32 flag)
{
moal_handle *handle = (moal_handle *)pmoal;
pcie_service_card *card = (pcie_service_card *)handle->card;
if (!card)
return MLAN_STATUS_FAILURE;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 18, 0)
dma_unmap_single(&card->dev->dev, buf_pa, size, flag);
#else
pci_unmap_single(card->dev, buf_pa, size, flag);
#endif
return MLAN_STATUS_SUCCESS;
}
#endif /* PCIE */
/**
* @brief Fill memory with constant byte
*
* @param pmoal Pointer to the MOAL context
* @param pmem Pointer to the memory area
* @param byte A constant byte
* @param num Number of bytes to fill
*
* @return Pointer to the memory area
*/
t_void *moal_memset(t_void *pmoal, t_void *pmem, t_u8 byte, t_u32 num)
{
t_void *p = pmem;
if (pmem && num)
p = memset(pmem, byte, num);
return p;
}
/**
* @brief Copy memory from one area to another
*
* @param pmoal Pointer to the MOAL context
* @param pdest Pointer to the dest memory
* @param psrc Pointer to the src memory
* @param num Number of bytes to move
*
* @return Pointer to the dest memory
*/
t_void *moal_memcpy(t_void *pmoal, t_void *pdest, const t_void *psrc, t_u32 num)
{
t_void *p = pdest;
if (pdest && psrc && num)
p = memcpy(pdest, psrc, num);
return p;
}
/**
* @brief Copy memory from one area to another
*
* @param pmoal Pointer to the MOAL context
* @param pdest Pointer to the dest memory
* @param psrc Pointer to the src memory
* @param num Number of bytes to move
* @param dest_size size of dest memory.
*
* @return Pointer to the dest memory
*/
t_void *moal_memcpy_ext(t_void *pmoal, t_void *pdest, const t_void *psrc,
t_u32 num, t_u32 dest_size)
{
t_void *p = pdest;
if (pdest && psrc && num && dest_size)
p = memcpy(pdest, psrc, MIN(num, dest_size));
return p;
}
/**
* @brief Move memory from one area to another
*
* @param pmoal Pointer to the MOAL context
* @param pdest Pointer to the dest memory
* @param psrc Pointer to the src memory
* @param num Number of bytes to move
*
* @return Pointer to the dest memory
*/
t_void *moal_memmove(t_void *pmoal, t_void *pdest, const t_void *psrc,
t_u32 num)
{
t_void *p = pdest;
if (pdest && psrc && num)
p = memmove(pdest, psrc, num);
return p;
}
/**
* @brief Compare two memory areas
*
* @param pmoal Pointer to the MOAL context
* @param pmem1 Pointer to the first memory
* @param pmem2 Pointer to the second memory
* @param num Number of bytes to compare
*
* @return Compare result returns by memcmp
*/
t_s32 moal_memcmp(t_void *pmoal, const t_void *pmem1, const t_void *pmem2,
t_u32 num)
{
t_s32 result;
result = memcmp(pmem1, pmem2, num);
return result;
}
/**
* @brief Delay function
*
* @param pmoal Pointer to the MOAL context
* @param delay delay in micro-second
*
* @return N/A
*/
t_void moal_udelay(t_void *pmoal, t_u32 delay)
{
if (delay >= 1000)
msleep(delay / 1000);
if (delay % 1000)
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 36)
usleep_range(delay % 1000 - 1, delay % 1000);
#else
udelay(delay % 1000);
#endif
}
/**
* @brief usleep_range function
*
* @param pmoal Pointer to the MOAL context
* @param min_delay minimal delay in micro-second
* @param max_delay delay in micro-second
*
* @return N/A
*/
t_void moal_usleep_range(t_void *pmoal, t_u32 min_delay, t_u32 max_delay)
{
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 36)
usleep_range(min_delay, max_delay);
#endif
}
/**
* @brief Retrieves the current system time
*
* @param pmoal Pointer to the MOAL context
* @param psec Pointer to buf for the seconds of system time
* @param pusec Pointer to buf the micro seconds of system time
*
* @return MLAN_STATUS_SUCCESS
*/
mlan_status moal_get_system_time(t_void *pmoal, t_u32 *psec, t_u32 *pusec)
{
wifi_timeval t;
woal_get_monotonic_time(&t);
*psec = t.time_sec;
*pusec = t.time_usec;
return MLAN_STATUS_SUCCESS;
}
/**
* @brief Retrieves the current boot time
*
* @param pmoal Pointer to the MOAL context
* @param pnsec Pointer to buf for the Nanoseconds of boot time
*
* @return MLAN_STATUS_SUCCESS
*/
mlan_status moal_get_boot_ktime(t_void *pmoal, t_u64 *pnsec)
{
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 17, 0)
ktime_t time;
time = ktime_get_with_offset(TK_OFFS_BOOT);
*pnsec = *(t_u64 *)&(time);
#endif
return MLAN_STATUS_SUCCESS;
}
/**
* @brief Initializes the timer
*
* @param pmoal Pointer to the MOAL context
* @param pptimer Pointer to the timer
* @param callback Pointer to callback function
* @param pcontext Pointer to context
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_init_timer(t_void *pmoal, t_void **pptimer,
IN t_void (*callback)(t_void *pcontext),
t_void *pcontext)
{
moal_drv_timer *timer = NULL;
gfp_t mem_flag = (in_interrupt() || in_atomic() || irqs_disabled()) ?
GFP_ATOMIC :
GFP_KERNEL;
timer = kmalloc(sizeof(moal_drv_timer), mem_flag);
if (timer == NULL)
return MLAN_STATUS_FAILURE;
woal_initialize_timer(timer, callback, pcontext);
*pptimer = (t_void *)timer;
return MLAN_STATUS_SUCCESS;
}
/**
* @brief Free the timer
*
* @param pmoal Pointer to the MOAL context
* @param ptimer Pointer to the timer
*
* @return MLAN_STATUS_SUCCESS
*/
mlan_status moal_free_timer(t_void *pmoal, t_void *ptimer)
{
moal_drv_timer *timer = (moal_drv_timer *)ptimer;
if (timer) {
if ((timer->timer_is_canceled == MFALSE) &&
timer->time_period) {
PRINTM(MWARN,
"mlan try to free timer without stop timer!\n");
woal_cancel_timer(timer);
}
kfree(timer);
}
return MLAN_STATUS_SUCCESS;
}
/**
* @brief Start the timer
*
* @param pmoal Pointer to the MOAL context
* @param ptimer Pointer to the timer
* @param periodic Periodic timer
* @param msec Timer value in milliseconds
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_start_timer(t_void *pmoal, t_void *ptimer, t_u8 periodic,
t_u32 msec)
{
if (!ptimer)
return MLAN_STATUS_FAILURE;
((moal_drv_timer *)ptimer)->timer_is_periodic = periodic;
woal_mod_timer((moal_drv_timer *)ptimer, msec);
return MLAN_STATUS_SUCCESS;
}
/**
* @brief Stop the timer
*
* @param pmoal Pointer to the MOAL context
* @param ptimer Pointer to the timer
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_stop_timer(t_void *pmoal, t_void *ptimer)
{
if (!ptimer)
return MLAN_STATUS_FAILURE;
woal_cancel_timer((moal_drv_timer *)ptimer);
return MLAN_STATUS_SUCCESS;
}
/**
* @brief Initializes the lock
*
* @param pmoal Pointer to the MOAL context
* @param pplock Pointer to the lock
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_init_lock(t_void *pmoal, t_void **pplock)
{
moal_handle *handle = (moal_handle *)pmoal;
moal_lock *mlock = NULL;
mlock = kmalloc(sizeof(moal_lock), GFP_ATOMIC);
if (!mlock)
return MLAN_STATUS_FAILURE;
spin_lock_init(&mlock->lock);
*pplock = (t_void *)mlock;
atomic_inc(&handle->lock_count);
return MLAN_STATUS_SUCCESS;
}
/**
* @brief Free the lock
*
* @param pmoal Pointer to the MOAL context
* @param plock Lock
*
* @return MLAN_STATUS_SUCCESS
*/
mlan_status moal_free_lock(t_void *pmoal, t_void *plock)
{
moal_handle *handle = (moal_handle *)pmoal;
moal_lock *mlock = plock;
kfree(mlock);
if (mlock)
atomic_dec(&handle->lock_count);
return MLAN_STATUS_SUCCESS;
}
/**
* @brief Request a spin lock
*
* @param pmoal Pointer to the MOAL context
* @param plock Pointer to the lock
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_spin_lock(t_void *pmoal, t_void *plock)
__acquires(&plock->lock)
{
moal_lock *mlock = plock;
unsigned long flags = 0;
spin_lock_irqsave(&mlock->lock, flags);
mlock->flags = flags;
return MLAN_STATUS_SUCCESS;
}
/**
* @brief Request a spin_unlock
*
* @param pmoal Pointer to the MOAL context
* @param plock Pointer to the lock
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_spin_unlock(t_void *pmoal, t_void *plock)
__releases(&plock->lock)
{
moal_lock *mlock = (moal_lock *)plock;
spin_unlock_irqrestore(&mlock->lock, mlock->flags);
return MLAN_STATUS_SUCCESS;
}
/**
* @brief This function collects AMSDU TP statistics.
*
* @param pmoal Pointer to the MOAL context
* @param amsdu_process_delay amsdu process time
* @param amsdu_copy_delay amsdu copy time
*
* @return N/A
*/
void moal_amsdu_tp_accounting(t_void *pmoal, t_s32 amsdu_process_delay,
t_s32 amsdu_copy_delay)
{
moal_handle *handle = (moal_handle *)pmoal;
handle->tp_acnt.rx_amsdu_delay[handle->tp_acnt.rx_amsdu_index] =
amsdu_process_delay;
handle->tp_acnt.rx_amsdu_copy_delay[handle->tp_acnt.rx_amsdu_index] =
amsdu_copy_delay;
handle->tp_acnt.rx_amsdu_index++;
if (handle->tp_acnt.rx_amsdu_index >= TXRX_MAX_SAMPLE)
handle->tp_acnt.rx_amsdu_index = 0;
}
/**
* @brief This function collects TP statistics.
*
* @param pmoal Pointer to the MOAL context
* @param buf pointer to the buffer of a packet
* @param drop_point Drop pointer user set
*
* @return N/A
*/
void moal_tp_accounting(t_void *pmoal, void *buf, t_u32 drop_point)
{
struct sk_buff *skb = NULL;
moal_handle *handle = (moal_handle *)pmoal;
pmlan_buffer pmbuf = (pmlan_buffer)buf;
t_s32 delay;
wifi_timeval t;
if (drop_point < MAX_TP_ACCOUNT_DROP_POINT_NUM) {
if (drop_point == 4) {
handle->tp_acnt.tx_bytes[drop_point] += pmbuf->data_len;
} else {
skb = (struct sk_buff *)buf;
handle->tp_acnt.tx_bytes[drop_point] += skb->len;
}
handle->tp_acnt.tx_packets[drop_point]++;
} else if (drop_point <= RX_DROP_P5) {
t_u16 rx_len = 0;
if (drop_point == RX_DROP_P1 || drop_point == RX_DROP_P2)
rx_len = pmbuf->data_len -
*((t_u16 *)(pmbuf->pbuf + pmbuf->data_offset) +
2); // remove rx_pkt_offset
else if (drop_point == RX_DROP_P3) // aggr pkt
rx_len = pmbuf->data_len;
else if (drop_point == RX_DROP_P4) { // before to kernel
skb = (struct sk_buff *)buf;
rx_len = skb->len;
}
handle->tp_acnt
.rx_bytes[drop_point - MAX_TP_ACCOUNT_DROP_POINT_NUM] +=
rx_len;
handle->tp_acnt.rx_packets[drop_point -
MAX_TP_ACCOUNT_DROP_POINT_NUM]++;
} else if (drop_point == RX_TIME_PKT) {
woal_get_monotonic_time(&t);
/* deque - pcie receive */
delay = (t_s32)(pmbuf->extra_ts_sec - pmbuf->in_ts_sec) *
1000000;
delay += (t_s32)(pmbuf->extra_ts_usec - pmbuf->in_ts_usec);
handle->tp_acnt.rx_delay1_driver[handle->tp_acnt.rx_index] =
delay;
/* before netif_rx - deque */
delay = (t_s32)(pmbuf->out_ts_sec - pmbuf->extra_ts_sec) *
1000000;
delay += (t_s32)(pmbuf->out_ts_usec - pmbuf->extra_ts_usec);
handle->tp_acnt.rx_delay2_driver[handle->tp_acnt.rx_index] =
delay;
/* netif_rx to netif_rx return */
delay = (t_s32)(t.time_sec - pmbuf->out_ts_sec) * 1000000;
delay += (t_s32)(t.time_usec - pmbuf->out_ts_usec);
handle->tp_acnt.rx_delay_kernel[handle->tp_acnt.rx_index] =
delay;
handle->tp_acnt.rx_index++;
if (handle->tp_acnt.rx_index >= TXRX_MAX_SAMPLE)
handle->tp_acnt.rx_index = 0;
} else if (drop_point == TX_TIME_PKT) {
delay = (t_s32)(pmbuf->out_ts_sec - pmbuf->in_ts_sec) * 1000000;
delay += (t_s32)(pmbuf->out_ts_usec - pmbuf->in_ts_usec);
handle->tp_acnt.tx_delay_driver[handle->tp_acnt.tx_index] =
delay;
handle->tp_acnt.tx_index++;
if (handle->tp_acnt.tx_index >= TXRX_MAX_SAMPLE)
handle->tp_acnt.tx_index = 0;
}
}
void moal_tp_accounting_rx_param(t_void *pmoal, unsigned int type,
unsigned int rsvd1)
{
moal_handle *phandle = (moal_handle *)pmoal;
switch (type) {
case 0: // Rx interrupt
phandle->tp_acnt.rx_intr_cnt++;
break;
case 1: // rx_pkts_queued
phandle->tp_acnt.rx_pending = rsvd1;
break;
case 2: // paused
phandle->tp_acnt.rx_paused_cnt++;
break;
case 3: // tx interrupt count
phandle->tp_acnt.tx_intr_cnt++;
break;
case 4: // rx amsdu count
phandle->tp_acnt.rx_amsdu_cnt++;
phandle->tp_acnt.rx_amsdu_pkt_cnt += rsvd1;
break;
case 5: // tx amsdu count
phandle->tp_acnt.tx_amsdu_cnt++;
phandle->tp_acnt.tx_amsdu_pkt_cnt += rsvd1;
break;
case 6: // rxbd rdptr full count
phandle->tp_acnt.rx_rdptr_full_cnt++;
break;
case 7: // tx hard xmit skb realloc count
phandle->tp_acnt.tx_xmit_skb_realloc_cnt++;
break;
case 8: // tx stop queue count
phandle->tp_acnt.tx_stop_queue_cnt++;
break;
default:
break;
}
}
/**
* @brief This function reads one block of firmware data from MOAL
*
* @param pmoal Pointer to the MOAL context
* @param offset Offset from where the data will be copied
* @param len Length to be copied
* @param pbuf Buffer where the data will be copied
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_get_fw_data(t_void *pmoal, t_u32 offset, t_u32 len, t_u8 *pbuf)
{
moal_handle *handle = (moal_handle *)pmoal;
if (!pbuf || !len || !handle->firmware)
return MLAN_STATUS_FAILURE;
if (offset + len > handle->firmware->size)
return MLAN_STATUS_FAILURE;
moal_memcpy_ext(handle, pbuf, handle->firmware->data + offset, len,
len);
return MLAN_STATUS_SUCCESS;
}
/**
* @brief This function get vdll data from moal
*
* @param pmoal Pointer to the MOAL context
* @param len Length to be copied
* @param pbuf Buffer where the data will be copied
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_get_vdll_data(t_void *pmoal, t_u32 len, t_u8 *pbuf)
{
moal_handle *handle = (moal_handle *)pmoal;
mlan_status status = MLAN_STATUS_FAILURE;
t_u32 offset = 0;
t_u8 req_fw = MFALSE;
if (!handle->firmware) {
req_fw = MTRUE;
woal_vdll_req_fw(handle);
}
if (handle->firmware) {
if (len < handle->firmware->size) {
offset = handle->firmware->size - len;
moal_memcpy_ext(handle, pbuf,
handle->firmware->data + offset, len,
len);
status = MLAN_STATUS_SUCCESS;
} else {
PRINTM(MERROR, "Invalid VDLL length = %d, fw_len=%d\n",
len, (int)handle->firmware->size);
}
if (req_fw) {
release_firmware(handle->firmware);
handle->firmware = NULL;
}
}
return status;
}
/**
* @brief This function is called when MLAN completes the initialization
* firmware.
*
* @param pmoal Pointer to the MOAL context
* @param status The status code for mlan_init_fw request
* @param phw pointer to mlan_hw_info
* @param ptbl pointer to mplan_bss_tbl
* @return MLAN_STATUS_SUCCESS
*/
mlan_status moal_get_hw_spec_complete(t_void *pmoal, mlan_status status,
mlan_hw_info *phw, pmlan_bss_tbl ptbl)
{
moal_handle *handle = (moal_handle *)pmoal;
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
int i;
t_u32 drv_mode = handle->params.drv_mode;
ENTER();
if (status == MLAN_STATUS_SUCCESS) {
PRINTM(MCMND, "Get Hw Spec done, fw_cap=0x%x\n", phw->fw_cap);
#ifdef PCIE9098
/** Special/Temporary handling to manage the driver version
* string to identify Seahawk/AW690 (skyhawk based) based on
* fw_cap_ext value set by Fw */
if (phw->fw_cap_ext & MBIT(31) &&
IS_PCIE9098(handle->card_type)) {
moal_memcpy_ext(handle, driver_version, CARD_PCIEAW690,
strlen(CARD_PCIEAW690),
strlen(driver_version));
moal_memcpy_ext(handle,
driver_version + strlen(INTF_CARDTYPE) +
strlen(KERN_VERSION),
V17, strlen(V17),
strlen(driver_version) -
strlen(INTF_CARDTYPE) -
strlen(KERN_VERSION));
moal_memcpy_ext(handle, handle->driver_version,
driver_version, strlen(driver_version),
MLAN_MAX_VER_STR_LEN - 1);
}
#endif
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
/** FW should only enable DFS on one mac */
if (!(phw->fw_cap & FW_CAPINFO_ZERO_DFS))
handle->params.drv_mode &= ~DRV_MODE_DFS;
if (!(phw->fw_cap & FW_CAPINFO_80211BGA))
handle->params.drv_mode &= ~DRV_MODE_WLAN;
if (!handle->params.drv_mode ||
MLAN_STATUS_SUCCESS !=
woal_update_drv_tbl(handle,
handle->params.drv_mode)) {
PRINTM(MERROR,
"Get_hw_spec_complete: Fail to update drv_tbl\n");
LEAVE();
return MLAN_STATUS_FAILURE;
}
memset(ptbl, 0, sizeof(mlan_bss_tbl));
for (i = 0; i < handle->drv_mode.intf_num; i++) {
ptbl->bss_attr[i].bss_type =
handle->drv_mode.bss_attr[i].bss_type;
ptbl->bss_attr[i].frame_type =
handle->drv_mode.bss_attr[i].frame_type;
ptbl->bss_attr[i].active =
handle->drv_mode.bss_attr[i].active;
ptbl->bss_attr[i].bss_priority =
handle->drv_mode.bss_attr[i].bss_priority;
ptbl->bss_attr[i].bss_num =
handle->drv_mode.bss_attr[i].bss_num;
ptbl->bss_attr[i].bss_virtual =
handle->drv_mode.bss_attr[i].bss_virtual;
}
PRINTM(MCMND, "org_drv_mode=0x%x drv_mode=0x%x\n", drv_mode,
handle->params.drv_mode);
}
LEAVE();
return MLAN_STATUS_SUCCESS;
}
/**
* @brief This function is called when MLAN completes the initialization
* firmware.
*
* @param pmoal Pointer to the MOAL context
* @param status The status code for mlan_init_fw request
*
* @return MLAN_STATUS_SUCCESS
*/
mlan_status moal_init_fw_complete(t_void *pmoal, mlan_status status)
{
moal_handle *handle = (moal_handle *)pmoal;
ENTER();
if (status == MLAN_STATUS_SUCCESS)
handle->hardware_status = HardwareStatusReady;
handle->init_wait_q_woken = MTRUE;
wake_up(&handle->init_wait_q);
LEAVE();
return MLAN_STATUS_SUCCESS;
}
/**
* @brief This function is called when MLAN shutdown firmware is completed.
*
* @param pmoal Pointer to the MOAL context
* @param status The status code for mlan_shutdown request
*
* @return MLAN_STATUS_SUCCESS
*/
mlan_status moal_shutdown_fw_complete(t_void *pmoal, mlan_status status)
{
moal_handle *handle = (moal_handle *)pmoal;
ENTER();
handle->hardware_status = HardwareStatusNotReady;
handle->init_wait_q_woken = MTRUE;
wake_up_interruptible(&handle->init_wait_q);
LEAVE();
return MLAN_STATUS_SUCCESS;
}
/**
* @brief This function is called when an MLAN IOCTL is completed.
*
* @param pmoal Pointer to the MOAL context
* @param pioctl_req pointer to structure mlan_ioctl_req
* @param status The status code for mlan_ioctl request
*
* @return MLAN_STATUS_SUCCESS
*/
mlan_status moal_ioctl_complete(t_void *pmoal, pmlan_ioctl_req pioctl_req,
mlan_status status)
{
moal_handle *handle = (moal_handle *)pmoal;
moal_private *priv = NULL;
wait_queue *wait;
unsigned long flags = 0;
ENTER();
if (!atomic_read(&handle->ioctl_pending))
PRINTM(MERROR, "ERR: Unexpected IOCTL completed: %p\n",
pioctl_req);
else
atomic_dec(&handle->ioctl_pending);
priv = woal_bss_index_to_priv(handle, pioctl_req->bss_index);
if (!priv) {
PRINTM(MERROR,
"IOCTL %p complete with NULL priv, bss_index=%d\n",
pioctl_req, pioctl_req->bss_index);
LEAVE();
return MLAN_STATUS_SUCCESS;
}
if (status != MLAN_STATUS_SUCCESS && status != MLAN_STATUS_COMPLETE)
PRINTM(MERROR,
"IOCTL failed: %p id=0x%x, sub_id=0x%x action=%d, status_code=0x%x\n",
pioctl_req, pioctl_req->req_id,
(*(t_u32 *)pioctl_req->pbuf), (int)pioctl_req->action,
pioctl_req->status_code);
else
PRINTM(MIOCTL,
"IOCTL completed: %p id=0x%x sub_id=0x%x, action=%d, status=%d, status_code=0x%x\n",
pioctl_req, pioctl_req->req_id,
(*(t_u32 *)pioctl_req->pbuf), (int)pioctl_req->action,
status, pioctl_req->status_code);
spin_lock_irqsave(&handle->driver_lock, flags);
wait = (wait_queue *)pioctl_req->reserved_1;
if (wait) {
wait->condition = MTRUE;
wait->status = status;
if (wait->wait_timeout) {
wake_up(&wait->wait);
} else {
if ((status != MLAN_STATUS_SUCCESS) &&
(pioctl_req->status_code ==
MLAN_ERROR_CMD_TIMEOUT)) {
PRINTM(MERROR, "IOCTL: command timeout\n");
} else {
wake_up_interruptible(&wait->wait);
}
}
spin_unlock_irqrestore(&handle->driver_lock, flags);
} else {
spin_unlock_irqrestore(&handle->driver_lock, flags);
if ((status == MLAN_STATUS_SUCCESS) &&
(pioctl_req->action == MLAN_ACT_GET))
woal_process_ioctl_resp(priv, pioctl_req);
kfree(pioctl_req);
}
LEAVE();
return MLAN_STATUS_SUCCESS;
}
/**
* @brief This function allocates mlan_buffer.
*
* @param pmoal Pointer to the MOAL context
* @param size allocation size requested
* @param pmbuf pointer to pointer to the allocated buffer
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_alloc_mlan_buffer(t_void *pmoal, t_u32 size,
pmlan_buffer *pmbuf)
{
*pmbuf = woal_alloc_mlan_buffer((moal_handle *)pmoal, size);
if (NULL == *pmbuf)
return MLAN_STATUS_FAILURE;
return MLAN_STATUS_SUCCESS;
}
/**
* @brief This function frees mlan_buffer.
*
* @param pmoal Pointer to the MOAL context
* @param pmbuf pointer to buffer to be freed
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_free_mlan_buffer(t_void *pmoal, pmlan_buffer pmbuf)
{
if (!pmbuf)
return MLAN_STATUS_FAILURE;
woal_free_mlan_buffer((moal_handle *)pmoal, pmbuf);
return MLAN_STATUS_SUCCESS;
}
/**
* @brief This function is called when MLAN complete send data packet.
*
* @param pmoal Pointer to the MOAL context
* @param pmbuf Pointer to the mlan buffer structure
* @param status The status code for mlan_send_packet request
*
* @return MLAN_STATUS_SUCCESS
*/
mlan_status moal_send_packet_complete(t_void *pmoal, pmlan_buffer pmbuf,
mlan_status status)
{
moal_private *priv = NULL;
moal_handle *handle = (moal_handle *)pmoal;
struct sk_buff *skb = NULL;
#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 29)
t_u32 index = 0;
#endif
ENTER();
if (pmbuf && pmbuf->buf_type == MLAN_BUF_TYPE_RAW_DATA) {
woal_free_mlan_buffer(handle, pmbuf);
atomic_dec(&handle->tx_pending);
goto done;
}
if (pmbuf) {
priv = woal_bss_index_to_priv(pmoal, pmbuf->bss_index);
skb = (struct sk_buff *)pmbuf->pdesc;
if (priv) {
woal_set_trans_start(priv->netdev);
if (skb) {
if (status == MLAN_STATUS_SUCCESS) {
priv->stats.tx_packets++;
priv->stats.tx_bytes += skb->len;
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
woal_packet_fate_monitor(
priv, PACKET_TYPE_TX,
TX_PKT_FATE_SENT,
FRAME_TYPE_ETHERNET_II, 0, 0,
skb->data, skb->data_len);
#endif
#endif
} else {
priv->stats.tx_errors++;
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
woal_packet_fate_monitor(
priv, PACKET_TYPE_TX,
TX_PKT_FATE_DRV_DROP_OTHER,
FRAME_TYPE_ETHERNET_II, 0, 0,
skb->data, skb->data_len);
#endif
#endif
}
#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 29)
index = skb_get_queue_mapping(skb);
if (index < 4) {
atomic_dec(&handle->tx_pending);
if (atomic_dec_return(
&priv->wmm_tx_pending[index]) ==
LOW_TX_PENDING) {
struct netdev_queue *txq =
netdev_get_tx_queue(
priv->netdev,
index);
if (netif_tx_queue_stopped(
txq)) {
netif_tx_wake_queue(
txq);
PRINTM(MINFO,
"Wakeup Kernel Queue:%d\n",
index);
}
}
} else {
PRINTM(MERROR,
"Invalid queue index for skb\n");
}
#else /*#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,29)*/
if (atomic_dec_return(&handle->tx_pending) <
LOW_TX_PENDING) {
int i;
for (i = 0; i < handle->priv_num; i++) {
#ifdef STA_SUPPORT
if ((GET_BSS_ROLE(
handle->priv[i]) ==
MLAN_BSS_ROLE_STA) &&
(handle->priv[i]
->media_connected ||
priv->is_adhoc_link_sensed)) {
woal_wake_queue(
handle->priv[i]
->netdev);
}
#endif
#ifdef UAP_SUPPORT
if ((GET_BSS_ROLE(
handle->priv[i]) ==
MLAN_BSS_ROLE_UAP) &&
(handle->priv[i]
->media_connected)) {
woal_wake_queue(
handle->priv[i]
->netdev);
}
#endif
}
}
#endif /*#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,29)*/
}
}
if (skb)
dev_kfree_skb_any(skb);
}
done:
if ((atomic_read(&handle->tx_pending) == 0) &&
!is_zero_timeval(handle->tx_time_start)) {
woal_get_monotonic_time(&handle->tx_time_end);
handle->tx_time +=
(t_u64)(timeval_to_usec(handle->tx_time_end) -
timeval_to_usec(handle->tx_time_start));
PRINTM(MINFO,
"%s : start_timeval=%d:%d end_timeval=%d:%d inter=%llu tx_time=%llu\n",
__func__, handle->tx_time_start.time_sec,
handle->tx_time_start.time_usec,
handle->tx_time_end.time_sec,
handle->tx_time_end.time_usec,
(t_u64)(timeval_to_usec(handle->tx_time_end) -
timeval_to_usec(handle->tx_time_start)),
handle->tx_time);
handle->tx_time_start.time_sec = 0;
handle->tx_time_start.time_usec = 0;
}
LEAVE();
return MLAN_STATUS_SUCCESS;
}
#ifdef USB
/**
* @brief This function is called when MLAN complete receiving
* data/event/command
*
* @param pmoal Pointer to the MOAL context
* @param pmbuf Pointer to the mlan buffer structure
* @param port Port number for receive
* @param status The status code for mlan_receive request
*
* @return MLAN_STATUS_SUCCESS
*/
mlan_status moal_recv_complete(t_void *pmoal, pmlan_buffer pmbuf, t_u32 port,
mlan_status status)
{
moal_private *priv = NULL;
moal_handle *handle = (moal_handle *)pmoal;
struct usb_card_rec *cardp = (struct usb_card_rec *)handle->card;
ENTER();
if ((pmbuf && (pmbuf->flags & MLAN_BUF_FLAG_RX_DEAGGR)) || !pmbuf)
atomic_dec(&handle->rx_pending);
if (pmbuf) {
priv = woal_bss_index_to_priv(handle, pmbuf->bss_index);
if (priv && (pmbuf->buf_type == MLAN_BUF_TYPE_DATA) &&
(status == MLAN_STATUS_FAILURE)) {
priv->stats.rx_dropped++;
}
/* Reuse the buffer in case of command/event */
if (port == cardp->rx_cmd_ep)
woal_submit_rx_urb(handle, port);
else {
woal_free_mlan_buffer(handle, pmbuf);
if ((atomic_read(&handle->rx_pending) <
USB_LOW_RX_PENDING) &&
atomic_read(&cardp->rx_data_urb_pending) <
MVUSB_RX_DATA_URB)
woal_usb_submit_rx_data_urbs(handle);
}
} else if (port == cardp->rx_data_ep) {
if ((atomic_read(&handle->rx_pending) < USB_LOW_RX_PENDING) &&
atomic_read(&cardp->rx_data_urb_pending) <
MVUSB_RX_DATA_URB)
woal_usb_submit_rx_data_urbs(handle);
}
LEAVE();
return MLAN_STATUS_SUCCESS;
}
/**
* @brief This function write a command/data packet to card.
*
* @param pmoal Pointer to the MOAL context
* @param pmbuf Pointer to the mlan buffer structure
* @param port Port number for sent
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE or
* MLAN_STATUS_PENDING or MLAN_STATUS_RESOURCE
*/
mlan_status moal_write_data_async(t_void *pmoal, pmlan_buffer pmbuf, t_u32 port)
{
moal_handle *handle = (moal_handle *)pmoal;
mlan_status ret = MLAN_STATUS_SUCCESS;
ENTER();
if (handle->is_suspended == MTRUE) {
PRINTM(MERROR,
"write_data_async is not allowed while suspended\n");
LEAVE();
return MLAN_STATUS_FAILURE;
}
ret = woal_write_data_async((moal_handle *)pmoal, pmbuf, (t_u8)port);
LEAVE();
return ret;
}
#endif /* USB */
/**
* @brief This function write a command/data packet to card.
* This function blocks the call until it finishes
*
* @param pmoal Pointer to the MOAL context
* @param pmbuf Pointer to the mlan buffer structure
* @param port Port number for sent
* @param timeout Timeout value in milliseconds (if 0 the wait is forever)
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_write_data_sync(t_void *pmoal, pmlan_buffer pmbuf, t_u32 port,
t_u32 timeout)
{
moal_handle *handle = (moal_handle *)pmoal;
return handle->ops.write_data_sync(handle, pmbuf, port, timeout);
}
/**
* @brief This function read data packet/event/command from card.
* This function blocks the call until it finish
*
* @param pmoal Pointer to the MOAL context
* @param pmbuf Pointer to the mlan buffer structure
* @param port Port number for read
* @param timeout Timeout value in milliseconds (if 0 the wait is forever)
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_read_data_sync(t_void *pmoal, pmlan_buffer pmbuf, t_u32 port,
t_u32 timeout)
{
moal_handle *handle = (moal_handle *)pmoal;
return handle->ops.read_data_sync(handle, pmbuf, port, timeout);
}
#if defined(SDIO) || defined(PCIE)
/**
* @brief This function writes data into card register.
*
* @param pmoal Pointer to the MOAL context
* @param reg register offset
* @param data value
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_write_reg(t_void *pmoal, t_u32 reg, t_u32 data)
{
int ret = MLAN_STATUS_FAILURE;
moal_handle *handle = (moal_handle *)pmoal;
if (handle->ops.write_reg)
ret = handle->ops.write_reg(handle, reg, data);
return ret;
}
/**
* @brief This function reads data from card register.
*
* @param pmoal Pointer to the MOAL context
* @param reg register offset
* @param data value
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_read_reg(t_void *pmoal, t_u32 reg, t_u32 *data)
{
int ret = MLAN_STATUS_FAILURE;
moal_handle *handle = (moal_handle *)pmoal;
if (handle->ops.read_reg)
ret = handle->ops.read_reg(handle, reg, data);
return ret;
}
#endif /* SDIO || PCIE */
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
#if defined(STA_CFG80211) && defined(UAP_CFG80211)
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)
/**
* @brief This function uploads the packet to the network stack monitor
* interface
*
* @param handle Pointer to the MOAL context
* @param pmbuf Pointer to mlan_buffer
*
* @return MLAN_STATUS_SUCCESS/MLAN_STATUS_PENDING/MLAN_STATUS_FAILURE
*/
static mlan_status moal_recv_packet_to_mon_if(moal_handle *handle,
pmlan_buffer pmbuf)
{
mlan_status status = MLAN_STATUS_SUCCESS;
struct sk_buff *skb = NULL;
struct radiotap_header *rth = NULL;
radiotap_info rt_info = {};
t_u8 format = 0;
t_u8 bw = 0;
t_u8 gi = 0;
t_u8 ldpc = 0;
t_u8 chan_num;
t_u8 band = 0;
struct ieee80211_hdr *dot11_hdr = NULL;
t_u8 *payload = NULL;
t_u32 vht_sig1 = 0;
t_u32 vht_sig2 = 0;
ENTER();
if (!pmbuf->pdesc) {
LEAVE();
return status;
}
skb = (struct sk_buff *)pmbuf->pdesc;
if ((handle->mon_if) && netif_running(handle->mon_if->mon_ndev)) {
if (handle->mon_if->radiotap_enabled) {
if (skb_headroom(skb) < sizeof(*rth)) {
PRINTM(MERROR,
"%s No space to add Radio TAP header\n",
__func__);
status = MLAN_STATUS_FAILURE;
handle->mon_if->stats.rx_dropped++;
goto done;
}
dot11_hdr =
(struct ieee80211_hdr *)(pmbuf->pbuf +
pmbuf->data_offset);
moal_memcpy_ext(handle, &rt_info,
pmbuf->pbuf + pmbuf->data_offset -
sizeof(rt_info),
sizeof(rt_info), sizeof(rt_info));
ldpc = (rt_info.rate_info.rate_info & 0x20) >> 5;
format = (rt_info.rate_info.rate_info & 0x18) >> 3;
bw = (rt_info.rate_info.rate_info & 0x06) >> 1;
gi = rt_info.rate_info.rate_info & 0x01;
skb_push(skb, sizeof(*rth));
rth = (struct radiotap_header *)skb->data;
memset(skb->data, 0, sizeof(*rth));
rth->hdr.it_version = PKTHDR_RADIOTAP_VERSION;
rth->hdr.it_pad = 0;
rth->hdr.it_len = cpu_to_le16(sizeof(*rth));
rth->hdr.it_present = cpu_to_le32(
(1 << IEEE80211_RADIOTAP_TSFT) |
(1 << IEEE80211_RADIOTAP_FLAGS) |
(1 << IEEE80211_RADIOTAP_CHANNEL) |
(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) |
(1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) |
(1 << IEEE80211_RADIOTAP_ANTENNA));
/** Timstamp */
rth->body.timestamp = woal_cpu_to_le64(jiffies);
/** Flags */
rth->body.flags = (rt_info.extra_info.flags &
~(RADIOTAP_FLAGS_USE_SGI_HT |
RADIOTAP_FLAGS_WITH_FRAGMENT |
RADIOTAP_FLAGS_WEP_ENCRYPTION |
RADIOTAP_FLAGS_FAILED_FCS_CHECK));
/** reverse fail fcs, 1 means pass FCS in FW, but means
* fail FCS in radiotap */
rth->body.flags |= (~rt_info.extra_info.flags) &
RADIOTAP_FLAGS_FAILED_FCS_CHECK;
if ((format == MLAN_RATE_FORMAT_HT) && (gi == 1))
rth->body.flags |= RADIOTAP_FLAGS_USE_SGI_HT;
if (ieee80211_is_mgmt(dot11_hdr->frame_control) ||
ieee80211_is_data(dot11_hdr->frame_control)) {
if ((ieee80211_has_morefrags(
dot11_hdr->frame_control)) ||
(!ieee80211_is_first_frag(
dot11_hdr->seq_ctrl))) {
rth->body.flags |=
RADIOTAP_FLAGS_WITH_FRAGMENT;
}
}
if (ieee80211_is_data(dot11_hdr->frame_control) &&
ieee80211_has_protected(dot11_hdr->frame_control)) {
payload = (t_u8 *)dot11_hdr +
ieee80211_hdrlen(
dot11_hdr->frame_control);
if (!(*(payload + 3) & 0x20)) /** ExtIV bit
shall be 0 for
WEP frame */
rth->body.flags |=
RADIOTAP_FLAGS_WEP_ENCRYPTION;
}
/** Rate, t_u8 only apply for LG mode */
if (format == MLAN_RATE_FORMAT_LG) {
rth->hdr.it_present |= cpu_to_le32(
1 << IEEE80211_RADIOTAP_RATE);
rth->body.rate = rt_info.rate_info.bitrate;
}
/** Channel */
rth->body.channel.flags = 0;
if (rt_info.chan_num)
chan_num = rt_info.chan_num;
else
chan_num =
handle->mon_if->band_chan_cfg.channel;
band = (chan_num <= 14) ? IEEE80211_BAND_2GHZ :
IEEE80211_BAND_5GHZ;
rth->body.channel.frequency = woal_cpu_to_le16(
ieee80211_channel_to_frequency(chan_num, band));
rth->body.channel.flags |=
woal_cpu_to_le16((band == IEEE80211_BAND_2GHZ) ?
CHANNEL_FLAGS_2GHZ :
CHANNEL_FLAGS_5GHZ);
if (rth->body.channel.flags &
woal_cpu_to_le16(CHANNEL_FLAGS_2GHZ))
rth->body.channel.flags |= woal_cpu_to_le16(
CHANNEL_FLAGS_DYNAMIC_CCK_OFDM);
else
rth->body.channel.flags |=
woal_cpu_to_le16(CHANNEL_FLAGS_OFDM);
if (handle->mon_if->chandef.chan &&
(handle->mon_if->chandef.chan->flags &
(IEEE80211_CHAN_PASSIVE_SCAN |
IEEE80211_CHAN_RADAR)))
rth->body.channel.flags |= woal_cpu_to_le16(
CHANNEL_FLAGS_ONLY_PASSIVSCAN_ALLOW);
/** Antenna */
rth->body.antenna_signal = -(rt_info.nf - rt_info.snr);
rth->body.antenna_noise = -rt_info.nf;
/* Convert FW antenna value to radiotap spec */
rth->body.antenna = (t_u16)rt_info.antenna >> 1;
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
/** MCS */
if (format == MLAN_RATE_FORMAT_HT) {
rth->hdr.it_present |= cpu_to_le32(
1 << IEEE80211_RADIOTAP_MCS);
rth->body.u.mcs.known =
rt_info.extra_info.mcs_known;
rth->body.u.mcs.flags =
rt_info.extra_info.mcs_flags;
/** MCS mcs */
rth->body.u.mcs.known |=
MCS_KNOWN_MCS_INDEX_KNOWN;
rth->body.u.mcs.mcs =
rt_info.rate_info.mcs_index;
/** MCS bw */
rth->body.u.mcs.known |= MCS_KNOWN_BANDWIDTH;
rth->body.u.mcs.flags &= ~(0x03); /** Clear,
20MHz as
default */
if (bw == 1)
rth->body.u.mcs.flags |= RX_BW_40;
/** MCS gi */
rth->body.u.mcs.known |=
MCS_KNOWN_GUARD_INTERVAL;
rth->body.u.mcs.flags &= ~(1 << 2);
if (gi)
rth->body.u.mcs.flags |= gi << 2;
/** MCS FEC */
rth->body.u.mcs.known |= MCS_KNOWN_FEC_TYPE;
rth->body.u.mcs.flags &= ~(1 << 4);
if (ldpc)
rth->body.u.mcs.flags |= ldpc << 4;
}
/** VHT */
if (format == MLAN_RATE_FORMAT_VHT) {
vht_sig1 = rt_info.extra_info.vht_sig1;
vht_sig2 = rt_info.extra_info.vht_sig2;
/** Present Flag */
rth->hdr.it_present |= cpu_to_le32(
1 << IEEE80211_RADIOTAP_VHT);
/** STBC */
rth->body.u.vht.known |=
woal_cpu_to_le16(VHT_KNOWN_STBC);
if (vht_sig1 & MBIT(3))
rth->body.u.vht.flags |= VHT_FLAG_STBC;
/** TXOP_PS_NA */
/** TODO: Not support now */
/** GI */
rth->body.u.vht.known |=
woal_cpu_to_le16(VHT_KNOWN_GI);
if (vht_sig2 & MBIT(0))
rth->body.u.vht.flags |= VHT_FLAG_SGI;
/** SGI NSYM DIS */
rth->body.u.vht.known |= woal_cpu_to_le16(
VHT_KNOWN_SGI_NSYM_DIS);
if (vht_sig2 & MBIT(1))
rth->body.u.vht.flags |=
VHT_FLAG_SGI_NSYM_M10_9;
/** LDPC_EXTRA_OFDM_SYM */
/** TODO: Not support now */
/** BEAMFORMED */
rth->body.u.vht.known |=
woal_cpu_to_le16(VHT_KNOWN_BEAMFORMED);
if (vht_sig2 & MBIT(8))
rth->body.u.vht.flags |=
VHT_FLAG_BEAMFORMED;
/** BANDWIDTH */
rth->body.u.vht.known |=
woal_cpu_to_le16(VHT_KNOWN_BANDWIDTH);
if (bw == 1)
rth->body.u.vht.bandwidth = RX_BW_40;
else if (bw == 2)
rth->body.u.vht.bandwidth = RX_BW_80;
/** GROUP_ID */
rth->body.u.vht.known |=
woal_cpu_to_le16(VHT_KNOWN_GROUP_ID);
rth->body.u.vht.group_id =
(vht_sig1 & (0x3F0)) >> 4;
/** PARTIAL_AID */
/** TODO: Not support now */
/** mcs_nss */
rth->body.u.vht.mcs_nss[0] = vht_sig2 & (0xF0);
/* Convert FW NSS value to radiotap spec */
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
rth->body.u.vht.mcs_nss[0] |=
((vht_sig1 & (0x1C00)) >> 10) + 1;
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
/** coding */
if (vht_sig2 & MBIT(2))
rth->body.u.vht.coding |=
VHT_CODING_LDPC_USER0;
}
}
skb_set_mac_header(skb, 0);
skb->ip_summed = CHECKSUM_UNNECESSARY;
skb->pkt_type = PACKET_OTHERHOST;
skb->protocol = htons(ETH_P_802_2);
memset(skb->cb, 0, sizeof(skb->cb));
skb->dev = handle->mon_if->mon_ndev;
handle->mon_if->stats.rx_bytes += skb->len;
handle->mon_if->stats.rx_packets++;
if (in_interrupt())
netif_rx(skb);
else
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 17, 0)
netif_rx(skb);
#else
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
netif_rx_ni(skb);
#endif
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
status = MLAN_STATUS_PENDING;
}
done:
LEAVE();
return status;
}
#endif
#endif
/**
* @brief This function uploads amsdu packet to the network stack
*
* @param pmoal Pointer to the MOAL context
* @param pmbuf Pointer to the mlan buffer structure
*
* @return MLAN_STATUS_PENDING or MLAN_STATUS_FAILURE
*/
mlan_status moal_recv_amsdu_packet(t_void *pmoal, pmlan_buffer pmbuf)
{
mlan_status status = MLAN_STATUS_FAILURE;
struct sk_buff *skb = NULL;
struct sk_buff *frame = NULL;
int remaining;
const struct ethhdr *eth;
u8 dst[ETH_ALEN], src[ETH_ALEN];
moal_handle *handle = (moal_handle *)pmoal;
moal_private *priv = NULL;
struct net_device *netdev = NULL;
u8 *payload;
mlan_buffer mbuf;
t_u8 drop = 0;
t_u8 rfc1042_eth_hdr[MLAN_MAC_ADDR_LENGTH] = {0xaa, 0xaa, 0x03,
0x00, 0x00, 0x00};
wifi_timeval t1, t2;
t_s32 delay;
t_u32 in_ts_sec = 0;
t_u32 in_ts_usec = 0;
ENTER();
if (!pmbuf) {
PRINTM(MERROR, "%s: pmbuf is null\n", __func__);
goto done;
}
memset(&mbuf, 0, sizeof(mlan_buffer));
mbuf.bss_index = pmbuf->bss_index;
priv = woal_bss_index_to_priv(pmoal, pmbuf->bss_index);
if (priv == NULL) {
PRINTM(MERROR, "%s: priv is null\n", __func__);
goto done;
}
netdev = priv->netdev;
skb = (struct sk_buff *)pmbuf->pdesc;
if (!skb)
goto done;
skb_reserve(skb, pmbuf->data_offset);
if (skb_tailroom(skb) < (int)pmbuf->data_len) {
PRINTM(MERROR, "skb overflow: tail room=%d, data_len=%d\n",
skb_tailroom(skb), pmbuf->data_len);
goto done;
}
skb_put(skb, pmbuf->data_len);
// rx_trace 8
if (handle->tp_acnt.on) {
moal_tp_accounting(pmoal, skb, RX_DROP_P4);
woal_get_monotonic_time(&t1);
in_ts_sec = t1.time_sec;
in_ts_usec = t1.time_usec;
if (pmbuf->in_ts_sec) {
pmbuf->out_ts_sec = t1.time_sec;
pmbuf->out_ts_usec = t1.time_usec;
}
}
if (handle->tp_acnt.drop_point == RX_DROP_P4) {
status = MLAN_STATUS_PENDING;
dev_kfree_skb(skb);
goto done;
}
while (skb != frame) {
__be16 len;
u8 padding;
unsigned int subframe_len;
eth = (struct ethhdr *)skb->data;
len = ntohs(eth->h_proto);
subframe_len = sizeof(struct ethhdr) + len;
remaining = skb->len;
if (subframe_len > remaining) {
PRINTM(MERROR,
"Error in len: remaining = %d, subframe_len = %d\n",
remaining, subframe_len);
break;
}
memcpy(dst, eth->h_dest, ETH_ALEN);
memcpy(src, eth->h_source, ETH_ALEN);
padding = (4 - subframe_len) & 0x3;
skb_pull(skb, sizeof(struct ethhdr));
if (remaining <= (subframe_len + padding)) {
frame = skb;
status = MLAN_STATUS_PENDING;
} else {
frame = skb_clone(skb, GFP_ATOMIC);
skb_trim(frame, len);
eth = (struct ethhdr *)skb_pull(skb, len + padding);
if (!eth) {
PRINTM(MERROR, "Invalid amsdu packet\n");
break;
}
}
skb_reset_network_header(frame);
frame->dev = netdev;
frame->priority = skb->priority;
payload = frame->data;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 5, 0)
if (ether_addr_equal(payload, rfc1042_eth_hdr)) {
#else
if (!memcmp(payload, rfc1042_eth_hdr,
sizeof(rfc1042_eth_hdr))) {
#endif
/* Remove RFC1042 */
skb_pull(frame, 6);
memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN);
memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN);
} else {
memcpy(skb_push(frame, sizeof(__be16)), &len,
sizeof(__be16));
memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN);
memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN);
}
mbuf.pbuf = frame->data;
mbuf.data_len = frame->len;
mlan_process_deaggr_pkt(handle->pmlan_adapter, &mbuf, &drop);
if (drop) {
dev_kfree_skb(frame);
continue;
}
frame->protocol = eth_type_trans(frame, netdev);
frame->ip_summed = CHECKSUM_NONE;
if (in_interrupt())
netif_rx(frame);
else {
if (atomic_read(&handle->rx_pending) >
MAX_RX_PENDING_THRHLD)
netif_rx(frame);
else {
if (handle->params.net_rx == MTRUE) {
local_bh_disable();
netif_receive_skb(frame);
local_bh_enable();
} else {
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 17, 0)
netif_rx(frame);
#else
netif_rx_ni(frame);
#endif
}
}
}
}
if (handle->tp_acnt.on) {
if (pmbuf->in_ts_sec)
moal_tp_accounting(handle, pmbuf, RX_TIME_PKT);
woal_get_monotonic_time(&t2);
delay = (t_s32)(t2.time_sec - in_ts_sec) * 1000000;
delay += (t_s32)(t2.time_usec - in_ts_usec);
moal_amsdu_tp_accounting(pmoal, delay, 0);
}
done:
if (status == MLAN_STATUS_PENDING)
atomic_dec(&handle->mbufalloc_count);
LEAVE();
return status;
}
/**
* @brief This function uploads the packet to the network stack
*
* @param pmoal Pointer to the MOAL context
* @param pmbuf Pointer to the mlan buffer structure
*
* @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE
*/
mlan_status moal_recv_packet(t_void *pmoal, pmlan_buffer pmbuf)
{
mlan_status status = MLAN_STATUS_SUCCESS;
moal_private *priv = NULL;
struct sk_buff *skb = NULL;
moal_handle *handle = (moal_handle *)pmoal;
#if defined(USB) || defined(PCIE)
t_u32 max_rx_data_size = MLAN_RX_DATA_BUF_SIZE;
#endif
dot11_rxcontrol rxcontrol;
t_u8 rx_info_flag = MFALSE;
int j;
struct ethhdr *ethh = NULL;
struct net_device *netdev = NULL;
ENTER();
if (pmbuf) {
#ifdef USB
#ifdef STA_SUPPORT
if (IS_USB(handle->card_type)) {
struct usb_card_rec *cardp =
(struct usb_card_rec *)handle->card;
if (cardp->rx_deaggr_ctrl.enable) {
max_rx_data_size =
cardp->rx_deaggr_ctrl.aggr_max;
if (cardp->rx_deaggr_ctrl.aggr_mode ==
MLAN_USB_AGGR_MODE_NUM) {
max_rx_data_size *=
MAX(MLAN_USB_MAX_PKT_SIZE,
cardp->rx_deaggr_ctrl
.aggr_align);
max_rx_data_size =
MAX(max_rx_data_size,
MLAN_RX_DATA_BUF_SIZE);
}
}
}
#endif
#endif
priv = woal_bss_index_to_priv(pmoal, pmbuf->bss_index);
skb = (struct sk_buff *)pmbuf->pdesc;
if (priv) {
if (skb) {
skb_reserve(skb, pmbuf->data_offset);
if (skb_tailroom(skb) < (int)pmbuf->data_len) {
PRINTM(MERROR,
"skb overflow: tail room=%d, data_len=%d\n",
skb_tailroom(skb),
pmbuf->data_len);
status = MLAN_STATUS_FAILURE;
priv->stats.rx_dropped++;
goto done;
}
skb_put(skb, pmbuf->data_len);
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
#if defined(STA_CFG80211) && defined(UAP_CFG80211)
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)
if (pmbuf->flags & MLAN_BUF_FLAG_NET_MONITOR) {
status = moal_recv_packet_to_mon_if(
pmoal, pmbuf);
if (status == MLAN_STATUS_PENDING)
atomic_dec(
&handle->mbufalloc_count);
goto done;
}
#endif
#endif
pmbuf->pdesc = NULL;
pmbuf->pbuf = NULL;
pmbuf->data_offset = pmbuf->data_len = 0;
/* pkt been submit to kernel, no need to
* free by mlan*/
status = MLAN_STATUS_PENDING;
atomic_dec(&handle->mbufalloc_count);
} else {
PRINTM(MERROR, "%s without skb attach!!!\n",
__func__);
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
#if defined(STA_CFG80211) && defined(UAP_CFG80211)
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)
/** drop the packet without skb in
* monitor mode */
if (pmbuf->flags & MLAN_BUF_FLAG_NET_MONITOR) {
PRINTM(MINFO,
"%s Drop packet without skb\n",
__func__);
status = MLAN_STATUS_FAILURE;
priv->stats.rx_dropped++;
goto done;
}
#endif
#endif
skb = dev_alloc_skb(pmbuf->data_len +
MLAN_NET_IP_ALIGN);
if (!skb) {
PRINTM(MERROR, "%s fail to alloc skb\n",
__func__);
status = MLAN_STATUS_FAILURE;
priv->stats.rx_dropped++;
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
woal_packet_fate_monitor(
priv, PACKET_TYPE_RX,
RX_PKT_FATE_DRV_DROP_NOBUFS,
FRAME_TYPE_ETHERNET_II, 0, 0,
(t_u8 *)(pmbuf->pbuf +
pmbuf->data_offset),
pmbuf->data_len);
#endif
#endif
goto done;
}
skb_reserve(skb, MLAN_NET_IP_ALIGN);
moal_memcpy_ext(handle, skb->data,
(t_u8 *)(pmbuf->pbuf +
pmbuf->data_offset),
pmbuf->data_len,
pmbuf->data_len);
skb_put(skb, pmbuf->data_len);
}
ethh = (struct ethhdr *)(skb->data);
if (ntohs(ethh->h_proto) == ETH_P_PAE) {
PRINTM(MEVENT,
"wlan: %s Rx EAPOL pkt from " MACSTR
"\n",
priv->netdev->name,
MAC2STR(ethh->h_source));
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)
priv->deauth_evt_cnt = 0;
#endif
}
if (!netdev)
netdev = priv->netdev;
skb->dev = netdev;
skb->protocol = eth_type_trans(skb, netdev);
skb->ip_summed = CHECKSUM_NONE;
#if defined(USB) || defined(PCIE)
/* This is only required only in case of 11n and
USB as we alloc if(skb_tailroom(skb) <
pmbuf->data_len){ PRINTM(MERROR,"skb overflow:
tail room=%d, data_len\n", skb_tailroom(skb),
pmbuf->data_len); status = MLAN_STATUS_FAILURE;
priv->stats.rx_dropped++;
goto done;
}
* a buffer of 4K only if its 11N (to be able to
receive 4K AMSDU
* packets). In case of SD we allocate buffers
based on the size
* of packet and hence this is not needed.
*/
/* Modifying the truesize here as our allocation
* for each skb is 4K but we only receive 2K
* packets and this cause the kernel to start
* dropping packets in case where application
* has allocated buffer based on 2K size i.e. if
* there a 64K packet received (in IP fragments
* and application allocates 64K to receive this
* packet but this packet would almost double up
* because we allocate each 1.5K fragment in 4K
* and pass it up. As soon as the 64K limit hits
* kernel will start to drop rest of the
* fragments. Currently we fail the
* Filesndl-ht.scr script for UDP, hence this
* fix
*/
if (!IS_SD(priv->phandle->card_type)) {
if (skb->truesize > max_rx_data_size)
skb->truesize +=
(skb->len - max_rx_data_size);
}
#endif
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
if (!woal_filter_packet(priv, skb->data, skb->len, 0)) {
PRINTM(MEVENT, "drop filtered packet %s\n",
priv->netdev->name);
status = MLAN_STATUS_FAILURE;
priv->stats.rx_dropped++;
woal_packet_fate_monitor(
priv, PACKET_TYPE_RX,
RX_PKT_FATE_DRV_DROP_FILTER,
FRAME_TYPE_ETHERNET_II, 0, 0, skb->data,
skb->len);
dev_kfree_skb(skb);
goto done;
}
#endif
#endif
priv->stats.rx_bytes += skb->len;
priv->stats.rx_packets++;
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
woal_packet_fate_monitor(priv, PACKET_TYPE_RX,
RX_PKT_FATE_SUCCESS,
FRAME_TYPE_ETHERNET_II, 0, 0,
skb->data, skb->len);
#endif
#endif
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
#ifdef ANDROID_KERNEL
if (handle->params.wakelock_timeout) {
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 5, 0)
__pm_wakeup_event(
&handle->ws,
handle->params.wakelock_timeout);
#else
wake_lock_timeout(
&handle->wake_lock,
msecs_to_jiffies(
handle->params
.wakelock_timeout));
#endif
}
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
#endif
if (priv->rx_protocols.protocol_num) {
for (j = 0; j < priv->rx_protocols.protocol_num;
j++) {
if (htons((__force t_u16)
skb->protocol) ==
priv->rx_protocols.protocols[j])
rx_info_flag = MTRUE;
}
}
if (rx_info_flag &&
(skb_tailroom(skb) > (int)sizeof(rxcontrol))) {
memset(&rxcontrol, 0, sizeof(dot11_rxcontrol));
rxcontrol.datarate = pmbuf->u.rx_info.data_rate;
rxcontrol.channel = pmbuf->u.rx_info.channel;
rxcontrol.antenna = pmbuf->u.rx_info.antenna;
rxcontrol.rssi = pmbuf->u.rx_info.rssi;
skb_put(skb, sizeof(dot11_rxcontrol));
memmove(skb->data + sizeof(dot11_rxcontrol),
skb->data,
skb->len - sizeof(dot11_rxcontrol));
moal_memcpy_ext(handle, skb->data, &rxcontrol,
sizeof(dot11_rxcontrol),
sizeof(dot11_rxcontrol));
}
// rx_trace 8
if (priv->phandle->tp_acnt.on) {
wifi_timeval t;
moal_tp_accounting(handle, skb, RX_DROP_P4);
if (pmbuf && pmbuf->in_ts_sec) {
woal_get_monotonic_time(&t);
pmbuf->out_ts_sec = t.time_sec;
pmbuf->out_ts_usec = t.time_usec;
}
}
if (priv->phandle->tp_acnt.drop_point == RX_DROP_P4) {
status = MLAN_STATUS_PENDING;
dev_kfree_skb(skb);
} else if (in_interrupt())
netif_rx(skb);
else {
if (atomic_read(&handle->rx_pending) >
MAX_RX_PENDING_THRHLD)
netif_rx(skb);
else {
if (handle->params.net_rx == MTRUE) {
local_bh_disable();
netif_receive_skb(skb);
local_bh_enable();
} else {
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 17, 0)
netif_rx(skb);
#else
netif_rx_ni(skb);
#endif
}
}
}
if (priv->phandle->tp_acnt.on) {
if (pmbuf && pmbuf->in_ts_sec)
moal_tp_accounting(handle, pmbuf,
RX_TIME_PKT);
}
}
}
done:
LEAVE();
return status;
}
#if defined(PCIE) || defined(SDIO)
void woal_request_busfreq_pmqos_add(t_void *handle)
{
moal_handle *pmhandle = (moal_handle *)handle;
#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 4, 70)
#ifdef IMX_SUPPORT
if (IS_PCIE(pmhandle->card_type)) {
request_bus_freq(BUS_FREQ_HIGH);
}
#endif
#endif
if (moal_extflg_isset(pmhandle, EXT_PMQOS)) {
#if LINUX_VERSION_CODE <= KERNEL_VERSION(5, 6, 0)
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 36)
#ifdef IMX_SUPPORT
if (!pm_qos_request_active(&pmhandle->woal_pm_qos_req))
pm_qos_add_request(&pmhandle->woal_pm_qos_req,
PM_QOS_CPU_DMA_LATENCY, 0);
else
PRINTM(MERROR, "PM-QOS request already active\n");
#endif
#endif
#elif LINUX_VERSION_CODE >= KERNEL_VERSION(5, 7, 0)
#ifdef IMX_SUPPORT
if (!cpu_latency_qos_request_active(&pmhandle->woal_pm_qos_req))
cpu_latency_qos_add_request(&pmhandle->woal_pm_qos_req,
0);
else
PRINTM(MERROR, "PM-QOS request already active\n");
#endif
#endif
}
return;
}
void woal_release_busfreq_pmqos_remove(t_void *handle)
{
moal_handle *pmhandle = (moal_handle *)handle;
#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 4, 70)
#ifdef IMX_SUPPORT
if (IS_PCIE(pmhandle->card_type)) {
release_bus_freq(BUS_FREQ_HIGH);
}
#endif
#endif
if (moal_extflg_isset(pmhandle, EXT_PMQOS)) {
#if LINUX_VERSION_CODE <= KERNEL_VERSION(5, 6, 0)
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 36)
#ifdef IMX_SUPPORT
if (pm_qos_request_active(&pmhandle->woal_pm_qos_req))
pm_qos_remove_request(&pmhandle->woal_pm_qos_req);
else
PRINTM(MERROR, "PM-QOS request already removed\n");
#endif
#endif
#elif LINUX_VERSION_CODE >= KERNEL_VERSION(5, 7, 0)
#ifdef IMX_SUPPORT
if (cpu_latency_qos_request_active(&pmhandle->woal_pm_qos_req))
cpu_latency_qos_remove_request(
&pmhandle->woal_pm_qos_req);
else
PRINTM(MERROR, "PM-QOS request already removed\n");
#endif
#endif
}
return;
}
#endif /*defined(PCIE) || defined(SDIO)*/
/**
* @brief This function checks media_connected state for
* BSS types UAP/STA/P2P_GO/GC
*
* @param pmoal Pointer to the MOAL context
*
*/
int woal_check_media_connected(t_void *pmoal)
{
int i;
moal_handle *pmhandle = (moal_handle *)pmoal;
moal_private *pmpriv = NULL;
for (i = 0; i < pmhandle->priv_num; i++) {
pmpriv = pmhandle->priv[i];
if (!pmpriv)
continue;
if (pmpriv->media_connected == MTRUE) {
return MTRUE;
}
}
return MFALSE;
}
/**
* @brief This function checks connect and disconnect
* events for BSS types UAP/STA/P2P_GO/GC
*
* @param pmoal Pointer to the MOAL context
*
*/
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
void moal_connection_status_check_pmqos(t_void *pmoal)
{
moal_handle *pmhandle = (moal_handle *)pmoal;
if ((woal_check_media_connected(pmoal) == MTRUE)) {
if (pmhandle->request_pm == MFALSE) {
pmhandle->request_pm = MTRUE;
#if defined(PCIE) || defined(SDIO)
woal_request_busfreq_pmqos_add(pmhandle);
#endif
}
} else {
if (pmhandle->request_pm == MTRUE) {
pmhandle->request_pm = MFALSE;
#if defined(PCIE) || defined(SDIO)
woal_release_busfreq_pmqos_remove(pmhandle);
#endif
}
}
}
#ifdef UAP_SUPPORT
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 11, 0)
/**
* @brief Handle RX MGMT PKT event
*
* @param priv A pointer moal_private structure
* @param pkt A pointer to pkt
* @param len length of pkt
*
* @return N/A
*/
static void woal_rx_mgmt_pkt_event(moal_private *priv, t_u8 *pkt, t_u16 len)
{
struct woal_event *evt;
unsigned long flags;
moal_handle *handle = priv->phandle;
evt = kzalloc(sizeof(struct woal_event), GFP_ATOMIC);
if (evt) {
evt->priv = priv;
evt->type = WOAL_EVENT_RX_MGMT_PKT;
evt->evt.event_len = len;
moal_memcpy_ext(priv->phandle, evt->evt.event_buf, pkt,
evt->evt.event_len, sizeof(evt->evt.event_buf));
INIT_LIST_HEAD(&evt->link);
spin_lock_irqsave(&handle->evt_lock, flags);
list_add_tail(&evt->link, &handle->evt_queue);
spin_unlock_irqrestore(&handle->evt_lock, flags);
queue_work(handle->evt_workqueue, &handle->evt_work);
}
}
#endif
#endif
#endif
/**
* @brief This function handles event receive
*
* @param pmoal Pointer to the MOAL context
* @param pmevent Pointer to the mlan event structure
*
* @return MLAN_STATUS_SUCCESS
*/
mlan_status moal_recv_event(t_void *pmoal, pmlan_event pmevent)
{
#ifdef STA_SUPPORT
int custom_len = 0;
#ifdef STA_CFG80211
unsigned long flags;
#endif
#endif
moal_private *priv = NULL;
#if defined(STA_SUPPORT) || defined(UAP_SUPPORT)
moal_private *pmpriv = NULL;
#endif
#if defined(STA_WEXT) || defined(UAP_WEXT)
#if defined(STA_SUPPORT) || defined(UAP_WEXT)
#if defined(UAP_SUPPORT) || defined(STA_WEXT)
union iwreq_data wrqu;
#endif
#endif
#endif
mlan_ds_ps_info pm_info;
moal_handle *handle = (moal_handle *)pmoal;
moal_handle *ref_handle = NULL;
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
#ifdef STA_CFG80211
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
t_u8 enable = 1;
#endif
t_u8 *req_ie = NULL;
t_u16 ie_len = 0;
apinfo *pinfo = NULL, *req_tlv = NULL;
MrvlIEtypesHeader_t *tlv = NULL;
t_u16 tlv_type = 0, tlv_len = 0, tlv_buf_left = 0;
#endif
#ifdef STA_CFG80211
t_u8 hw_test;
#endif
int cfg80211_wext;
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
#ifdef STA_CFG80211
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(4, 12, 0)
struct cfg80211_roam_info *roam_info = NULL;
#endif
#endif
t_u16 csi_len;
#ifdef STA_CFG80211
t_u8 channel_status;
moal_private *remain_priv = NULL;
#endif
#if defined(UAP_CFG80211) || defined(STA_CFG80211)
chan_band_info *pchan_info = NULL;
#endif
t_u8 radar_detected;
t_u8 bandwidth;
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
t_u8 event_buf[64];
t_u8 radar_chan;
#ifdef UAP_CFG80211
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
moal_private *cfg_priv = NULL;
#endif
#endif
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 15, 0)
#ifdef UAP_CFG80211
unsigned long wait_time, wait_time_ms, timeout;
#endif
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
#endif
t_u8 auto_fw_dump = MFALSE;
ENTER();
if (pmevent->event_id == MLAN_EVENT_ID_FW_DUMP_INFO) {
if (!handle->is_fw_dump_timer_set) {
PRINTM(MMSG, "FW trigger fw dump\n");
handle->is_fw_dump_timer_set = MTRUE;
woal_mod_timer(&handle->fw_dump_timer, MOAL_TIMER_5S);
}
woal_store_firmware_dump(pmoal, pmevent);
handle->driver_status = MTRUE;
wifi_status = WIFI_STATUS_FW_DUMP;
ref_handle = (moal_handle *)handle->pref_mac;
if (ref_handle)
ref_handle->driver_status = MTRUE;
goto done;
}
if ((pmevent->event_id != MLAN_EVENT_ID_DRV_DEFER_RX_WORK) &&
(pmevent->event_id != MLAN_EVENT_ID_DRV_DEFER_HANDLING) &&
(pmevent->event_id != MLAN_EVENT_ID_DRV_MGMT_FRAME))
PRINTM(MEVENT, "event id:0x%x\n", pmevent->event_id);
#if defined(PCIE)
if (pmevent->event_id == MLAN_EVENT_ID_SSU_DUMP_FILE) {
goto done;
}
#endif /* SSU_SUPPORT */
if (pmevent->event_id == MLAN_EVENT_ID_STORE_HOST_CMD_RESP) {
goto done;
}
priv = woal_bss_index_to_priv(pmoal, pmevent->bss_index);
if (priv == NULL) {
PRINTM(MERROR, "%s: priv is null\n", __func__);
goto done;
}
if (priv->netdev == NULL) {
PRINTM(MERROR, "%s: netdev is null\n", __func__);
goto done;
}
cfg80211_wext = priv->phandle->params.cfg80211_wext;
#ifdef STA_CFG80211
hw_test = moal_extflg_isset(pmoal, EXT_HW_TEST);
#endif
switch (pmevent->event_id) {
#ifdef STA_SUPPORT
case MLAN_EVENT_ID_FW_ADHOC_LINK_SENSED:
priv->is_adhoc_link_sensed = MTRUE;
if (!netif_carrier_ok(priv->netdev))
netif_carrier_on(priv->netdev);
woal_wake_queue(priv->netdev);
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext))
woal_send_iwevcustom_event(priv,
CUS_EVT_ADHOC_LINK_SENSED);
#endif
woal_broadcast_event(priv, CUS_EVT_ADHOC_LINK_SENSED,
strlen(CUS_EVT_ADHOC_LINK_SENSED));
break;
case MLAN_EVENT_ID_FW_ADHOC_LINK_LOST:
woal_stop_queue(priv->netdev);
if (netif_carrier_ok(priv->netdev))
netif_carrier_off(priv->netdev);
priv->is_adhoc_link_sensed = MFALSE;
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext))
woal_send_iwevcustom_event(priv,
CUS_EVT_ADHOC_LINK_LOST);
#endif
woal_broadcast_event(priv, CUS_EVT_ADHOC_LINK_LOST,
strlen(CUS_EVT_ADHOC_LINK_LOST));
break;
case MLAN_EVENT_ID_DRV_CONNECTED:
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext) &&
pmevent->event_len == ETH_ALEN) {
memset(wrqu.ap_addr.sa_data, 0x00, ETH_ALEN);
moal_memcpy_ext(priv->phandle, wrqu.ap_addr.sa_data,
pmevent->event_buf, ETH_ALEN,
#if LINUX_VERSION_CODE >= KERNEL_VERSION(6, 2, 0)
sizeof(wrqu.ap_addr.sa_data_min));
#else
sizeof(wrqu.ap_addr.sa_data));
#endif
wrqu.ap_addr.sa_family = ARPHRD_ETHER;
wireless_send_event(priv->netdev, SIOCGIWAP, &wrqu,
NULL);
}
#endif
#ifdef STA_CFG80211
if (IS_STA_CFG80211(cfg80211_wext)) {
moal_memcpy_ext(priv->phandle, priv->cfg_bssid,
pmevent->event_buf, ETH_ALEN, ETH_ALEN);
woal_set_scan_time(priv, ACTIVE_SCAN_CHAN_TIME,
PASSIVE_SCAN_CHAN_TIME,
MIN_SPECIFIC_SCAN_CHAN_TIME);
}
#endif
custom_len = strlen(CUS_EVT_AP_CONNECTED);
memmove(pmevent->event_buf + custom_len, pmevent->event_buf,
pmevent->event_len);
moal_memcpy_ext(priv->phandle, pmevent->event_buf,
CUS_EVT_AP_CONNECTED, custom_len, custom_len);
pmevent->event_len += custom_len;
woal_broadcast_event(priv, pmevent->event_buf,
pmevent->event_len);
woal_update_dscp_mapping(priv);
priv->media_connected = MTRUE;
if (!netif_carrier_ok(priv->netdev))
netif_carrier_on(priv->netdev);
woal_wake_queue(priv->netdev);
moal_connection_status_check_pmqos(pmoal);
break;
case MLAN_EVENT_ID_DRV_ASSOC_SUCC_LOGGER:
case MLAN_EVENT_ID_DRV_ASSOC_FAILURE_LOGGER:
case MLAN_EVENT_ID_DRV_DISCONNECT_LOGGER:
#ifdef STA_CFG80211
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
if (IS_STA_CFG80211(cfg80211_wext))
woal_ring_event_logger(priv, VERBOSE_RING_ID, pmevent);
#endif
#endif
break;
case MLAN_EVENT_ID_DRV_SCAN_REPORT:
PRINTM(MINFO, "Scan report\n");
if (priv->report_scan_result) {
priv->report_scan_result = MFALSE;
#ifdef STA_CFG80211
if (IS_STA_CFG80211(cfg80211_wext)) {
if (priv->phandle->scan_request) {
PRINTM(MINFO,
"Reporting scan results\n");
woal_inform_bss_from_scan_result(
priv, NULL, MOAL_NO_WAIT);
if (!priv->phandle->first_scan_done) {
priv->phandle->first_scan_done =
MTRUE;
woal_set_scan_time(
priv,
ACTIVE_SCAN_CHAN_TIME,
PASSIVE_SCAN_CHAN_TIME,
SPECIFIC_SCAN_CHAN_TIME);
}
spin_lock_irqsave(
&priv->phandle->scan_req_lock,
flags);
if (priv->phandle->scan_request) {
cancel_delayed_work(
&priv->phandle
->scan_timeout_work);
woal_cfg80211_scan_done(
priv->phandle
->scan_request,
MFALSE);
priv->phandle->scan_request =
NULL;
}
spin_unlock_irqrestore(
&priv->phandle->scan_req_lock,
flags);
}
}
#endif /* STA_CFG80211 */
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext)) {
memset(&wrqu, 0, sizeof(union iwreq_data));
wireless_send_event(priv->netdev, SIOCGIWSCAN,
&wrqu, NULL);
}
#endif
woal_broadcast_event(priv, (t_u8 *)&pmevent->event_id,
sizeof(mlan_event_id));
}
if (!is_zero_timeval(priv->phandle->scan_time_start)) {
woal_get_monotonic_time(&priv->phandle->scan_time_end);
priv->phandle->scan_time += (t_u64)(
timeval_to_usec(priv->phandle->scan_time_end) -
timeval_to_usec(
priv->phandle->scan_time_start));
PRINTM(MINFO,
"%s : start_timeval=%d:%d end_timeval=%d:%d inter=%llu scan_time=%llu\n",
__func__,
priv->phandle->scan_time_start.time_sec,
priv->phandle->scan_time_start.time_usec,
priv->phandle->scan_time_end.time_sec,
priv->phandle->scan_time_end.time_usec,
(t_u64)(timeval_to_usec(
priv->phandle->scan_time_end) -
timeval_to_usec(
priv->phandle->scan_time_start)),
priv->phandle->scan_time);
priv->phandle->scan_time_start.time_sec = 0;
priv->phandle->scan_time_start.time_usec = 0;
}
if (priv->phandle->scan_pending_on_block == MTRUE) {
priv->phandle->scan_pending_on_block = MFALSE;
priv->phandle->scan_priv = NULL;
MOAL_REL_SEMAPHORE(&priv->phandle->async_sem);
}
break;
case MLAN_EVENT_ID_DRV_OBSS_SCAN_PARAM:
memmove((pmevent->event_buf + strlen(CUS_EVT_OBSS_SCAN_PARAM) +
1),
pmevent->event_buf, pmevent->event_len);
moal_memcpy_ext(priv->phandle, pmevent->event_buf,
(t_u8 *)CUS_EVT_OBSS_SCAN_PARAM,
strlen(CUS_EVT_OBSS_SCAN_PARAM),
strlen(CUS_EVT_OBSS_SCAN_PARAM));
pmevent->event_buf[strlen(CUS_EVT_OBSS_SCAN_PARAM)] = 0;
woal_broadcast_event(priv, pmevent->event_buf,
pmevent->event_len +
strlen(CUS_EVT_OBSS_SCAN_PARAM));
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext)) {
memset(&wrqu, 0, sizeof(union iwreq_data));
wrqu.data.pointer = (t_u8 __user *)pmevent->event_buf;
wrqu.data.length = pmevent->event_len +
strlen(CUS_EVT_OBSS_SCAN_PARAM) + 1;
wireless_send_event(priv->netdev, IWEVCUSTOM, &wrqu,
pmevent->event_buf);
}
#endif
break;
case MLAN_EVENT_ID_FW_BW_CHANGED:
memmove((pmevent->event_buf + strlen(CUS_EVT_BW_CHANGED) + 1),
pmevent->event_buf, pmevent->event_len);
moal_memcpy_ext(priv->phandle, pmevent->event_buf,
(t_u8 *)CUS_EVT_BW_CHANGED,
strlen(CUS_EVT_BW_CHANGED),
strlen(CUS_EVT_BW_CHANGED));
pmevent->event_buf[strlen(CUS_EVT_BW_CHANGED)] = 0;
woal_broadcast_event(priv, pmevent->event_buf,
pmevent->event_len +
strlen(CUS_EVT_BW_CHANGED));
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext)) {
memset(&wrqu, 0, sizeof(union iwreq_data));
wrqu.data.pointer = (t_u8 __user *)pmevent->event_buf;
wrqu.data.length = pmevent->event_len +
strlen(CUS_EVT_BW_CHANGED) + 1;
wireless_send_event(priv->netdev, IWEVCUSTOM, &wrqu,
pmevent->event_buf);
}
#endif
break;
case MLAN_EVENT_ID_FW_DISCONNECTED:
woal_send_disconnect_to_system(priv,
(t_u16)*pmevent->event_buf);
#ifdef STA_CFG80211
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)
priv->auth_flag = 0;
priv->host_mlme = MFALSE;
priv->auth_alg = 0xFFFF;
#endif
#endif
#ifdef STA_WEXT
/* Reset wireless stats signal info */
if (IS_STA_WEXT(cfg80211_wext)) {
priv->w_stats.qual.level = 0;
priv->w_stats.qual.noise = 0;
}
#endif
#ifdef REASSOCIATION
if (priv->reassoc_on == MTRUE) {
if (priv->auto_assoc_priv.auto_assoc_type_on &
(0x1 << (AUTO_ASSOC_TYPE_DRV_RECONN - 1))) {
PRINTM(MINFO,
" auto assoc: trigger driver auto re-connect\n");
priv->auto_assoc_priv.auto_assoc_trigger_flag =
AUTO_ASSOC_TYPE_DRV_RECONN;
priv->auto_assoc_priv.drv_reconnect.status =
MTRUE;
PRINTM(MINFO, "Reassoc: trigger the timer\n");
priv->reassoc_required = MTRUE;
priv->phandle->is_reassoc_timer_set = MTRUE;
woal_mod_timer(&priv->phandle->reassoc_timer,
REASSOC_TIMER_DEFAULT);
}
} else {
priv->rate_index = AUTO_RATE;
}
#endif /* REASSOCIATION */
moal_connection_status_check_pmqos(pmoal);
break;
case MLAN_EVENT_ID_FW_MIC_ERR_UNI:
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext)) {
#if WIRELESS_EXT >= 18
woal_send_mic_error_event(priv,
MLAN_EVENT_ID_FW_MIC_ERR_UNI);
#else
woal_send_iwevcustom_event(priv,
CUS_EVT_MLME_MIC_ERR_UNI);
#endif
}
#endif /* STA_WEXT */
#ifdef STA_CFG80211
if (IS_STA_CFG80211(cfg80211_wext)) {
cfg80211_michael_mic_failure(priv->netdev,
priv->cfg_bssid,
NL80211_KEYTYPE_PAIRWISE,
-1, NULL, GFP_KERNEL);
}
#endif
woal_broadcast_event(priv, CUS_EVT_MLME_MIC_ERR_UNI,
strlen(CUS_EVT_MLME_MIC_ERR_UNI));
break;
case MLAN_EVENT_ID_FW_MIC_ERR_MUL:
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext)) {
#if WIRELESS_EXT >= 18
woal_send_mic_error_event(priv,
MLAN_EVENT_ID_FW_MIC_ERR_MUL);
#else
woal_send_iwevcustom_event(priv,
CUS_EVT_MLME_MIC_ERR_MUL);
#endif
}
#endif /* STA_WEXT */
#ifdef STA_CFG80211
if (IS_STA_CFG80211(cfg80211_wext)) {
cfg80211_michael_mic_failure(priv->netdev,
priv->cfg_bssid,
NL80211_KEYTYPE_GROUP, -1,
NULL, GFP_KERNEL);
}
#endif
woal_broadcast_event(priv, CUS_EVT_MLME_MIC_ERR_MUL,
strlen(CUS_EVT_MLME_MIC_ERR_MUL));
break;
case MLAN_EVENT_ID_FW_BCN_RSSI_LOW:
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext))
woal_send_iwevcustom_event(priv,
CUS_EVT_BEACON_RSSI_LOW);
#endif
#ifdef STA_CFG80211
if (IS_STA_CFG80211(cfg80211_wext)) {
#if CFG80211_VERSION_CODE > KERNEL_VERSION(2, 6, 35)
cfg80211_cqm_rssi_notify(
priv->netdev,
NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(4, 11, 0)
*(t_s16 *)pmevent->event_buf,
#endif
GFP_KERNEL);
priv->last_event |= EVENT_BCN_RSSI_LOW;
#endif
if (!hw_test && priv->roaming_enabled)
woal_config_bgscan_and_rssi(priv, MTRUE);
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
woal_cfg80211_rssi_monitor_event(
priv, *(t_s16 *)pmevent->event_buf);
#endif
}
#endif
woal_broadcast_event(priv, CUS_EVT_BEACON_RSSI_LOW,
strlen(CUS_EVT_BEACON_RSSI_LOW));
break;
case MLAN_EVENT_ID_FW_BCN_RSSI_HIGH:
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext))
woal_send_iwevcustom_event(priv,
CUS_EVT_BEACON_RSSI_HIGH);
#endif
#ifdef STA_CFG80211
if (IS_STA_CFG80211(cfg80211_wext)) {
if (!priv->mrvl_rssi_low) {
#if CFG80211_VERSION_CODE > KERNEL_VERSION(2, 6, 35)
cfg80211_cqm_rssi_notify(
priv->netdev,
NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(4, 11, 0)
*(t_s16 *)pmevent->event_buf,
#endif
GFP_KERNEL);
#endif
woal_set_rssi_threshold(
priv, MLAN_EVENT_ID_FW_BCN_RSSI_HIGH,
MOAL_NO_WAIT);
}
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
woal_cfg80211_rssi_monitor_event(
priv, *(t_s16 *)pmevent->event_buf);
#endif
}
#endif
woal_broadcast_event(priv, CUS_EVT_BEACON_RSSI_HIGH,
strlen(CUS_EVT_BEACON_RSSI_HIGH));
break;
case MLAN_EVENT_ID_FW_BCN_SNR_LOW:
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext))
woal_send_iwevcustom_event(priv,
CUS_EVT_BEACON_SNR_LOW);
#endif
woal_broadcast_event(priv, CUS_EVT_BEACON_SNR_LOW,
strlen(CUS_EVT_BEACON_SNR_LOW));
break;
case MLAN_EVENT_ID_FW_BCN_SNR_HIGH:
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext))
woal_send_iwevcustom_event(priv,
CUS_EVT_BEACON_SNR_HIGH);
#endif
woal_broadcast_event(priv, CUS_EVT_BEACON_SNR_HIGH,
strlen(CUS_EVT_BEACON_SNR_HIGH));
break;
case MLAN_EVENT_ID_FW_MAX_FAIL:
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext))
woal_send_iwevcustom_event(priv, CUS_EVT_MAX_FAIL);
#endif
woal_broadcast_event(priv, CUS_EVT_MAX_FAIL,
strlen(CUS_EVT_MAX_FAIL));
break;
case MLAN_EVENT_ID_FW_DATA_RSSI_LOW:
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext))
woal_send_iwevcustom_event(priv, CUS_EVT_DATA_RSSI_LOW);
#endif
woal_broadcast_event(priv, CUS_EVT_DATA_RSSI_LOW,
strlen(CUS_EVT_DATA_RSSI_LOW));
break;
case MLAN_EVENT_ID_FW_DATA_SNR_LOW:
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext))
woal_send_iwevcustom_event(priv, CUS_EVT_DATA_SNR_LOW);
#endif
woal_broadcast_event(priv, CUS_EVT_DATA_SNR_LOW,
strlen(CUS_EVT_DATA_SNR_LOW));
break;
case MLAN_EVENT_ID_FW_DATA_RSSI_HIGH:
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext))
woal_send_iwevcustom_event(priv,
CUS_EVT_DATA_RSSI_HIGH);
#endif
woal_broadcast_event(priv, CUS_EVT_DATA_RSSI_HIGH,
strlen(CUS_EVT_DATA_RSSI_HIGH));
break;
case MLAN_EVENT_ID_FW_DATA_SNR_HIGH:
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext))
woal_send_iwevcustom_event(priv, CUS_EVT_DATA_SNR_HIGH);
#endif
woal_broadcast_event(priv, CUS_EVT_DATA_SNR_HIGH,
strlen(CUS_EVT_DATA_SNR_HIGH));
break;
case MLAN_EVENT_ID_FW_LINK_QUALITY:
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext))
woal_send_iwevcustom_event(priv, CUS_EVT_LINK_QUALITY);
#endif
woal_broadcast_event(priv, CUS_EVT_LINK_QUALITY,
strlen(CUS_EVT_LINK_QUALITY));
break;
case MLAN_EVENT_ID_FW_PORT_RELEASE:
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext))
woal_send_iwevcustom_event(priv, CUS_EVT_PORT_RELEASE);
#endif
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)
priv->deauth_evt_cnt = 0;
#endif
woal_broadcast_event(priv, CUS_EVT_PORT_RELEASE,
strlen(CUS_EVT_PORT_RELEASE));
break;
case MLAN_EVENT_ID_FW_PRE_BCN_LOST:
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext))
woal_send_iwevcustom_event(priv,
CUS_EVT_PRE_BEACON_LOST);
#endif
#ifdef STA_CFG80211
#if CFG80211_VERSION_CODE > KERNEL_VERSION(2, 6, 35)
if (IS_STA_CFG80211(cfg80211_wext)) {
struct cfg80211_bss *bss = NULL;
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(4, 1, 0)
bss = cfg80211_get_bss(priv->wdev->wiphy, NULL,
priv->cfg_bssid, NULL, 0,
IEEE80211_BSS_TYPE_ESS,
IEEE80211_PRIVACY_ANY);
#else
bss = cfg80211_get_bss(priv->wdev->wiphy, NULL,
priv->cfg_bssid, NULL, 0,
WLAN_CAPABILITY_ESS,
WLAN_CAPABILITY_ESS);
#endif
if (bss) {
cfg80211_unlink_bss(priv->wdev->wiphy, bss);
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 9, 0)
cfg80211_put_bss(priv->wdev->wiphy, bss);
#else
cfg80211_put_bss(bss);
#endif
}
if (!hw_test && priv->roaming_enabled)
woal_config_bgscan_and_rssi(priv, MFALSE);
else {
cfg80211_cqm_rssi_notify(
priv->netdev,
NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(4, 11, 0)
0,
#endif
GFP_KERNEL);
}
priv->last_event |= EVENT_PRE_BCN_LOST;
}
#endif
#endif
woal_broadcast_event(priv, CUS_EVT_PRE_BEACON_LOST,
strlen(CUS_EVT_PRE_BEACON_LOST));
break;
case MLAN_EVENT_ID_FW_DEBUG_INFO:
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext))
woal_send_iwevcustom_event(priv, pmevent->event_buf);
#endif
memmove((pmevent->event_buf + strlen(FW_DEBUG_INFO) + 1),
pmevent->event_buf, pmevent->event_len);
moal_memcpy_ext(priv->phandle, pmevent->event_buf,
(t_u8 *)FW_DEBUG_INFO, strlen(FW_DEBUG_INFO),
strlen(FW_DEBUG_INFO));
pmevent->event_buf[strlen(FW_DEBUG_INFO)] = 0;
woal_broadcast_event(priv, pmevent->event_buf,
pmevent->event_len +
strlen(FW_DEBUG_INFO) + 1);
break;
case MLAN_EVENT_ID_FW_WMM_CONFIG_CHANGE:
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext))
woal_send_iwevcustom_event(
priv, WMM_CONFIG_CHANGE_INDICATION);
#endif
woal_broadcast_event(priv, WMM_CONFIG_CHANGE_INDICATION,
strlen(WMM_CONFIG_CHANGE_INDICATION));
break;
case MLAN_EVENT_ID_DRV_REPORT_STRING:
PRINTM(MINFO, "Report string %s\n", pmevent->event_buf);
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext))
woal_send_iwevcustom_event(priv, pmevent->event_buf);
#endif
woal_broadcast_event(priv, pmevent->event_buf,
strlen(pmevent->event_buf));
break;
case MLAN_EVENT_ID_FW_WEP_ICV_ERR:
DBG_HEXDUMP(MCMD_D, "WEP ICV error", pmevent->event_buf,
pmevent->event_len);
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext))
woal_send_iwevcustom_event(priv, CUS_EVT_WEP_ICV_ERR);
#endif
woal_broadcast_event(priv, CUS_EVT_WEP_ICV_ERR,
strlen(CUS_EVT_WEP_ICV_ERR));
break;
case MLAN_EVENT_ID_DRV_DEFER_HANDLING:
queue_work(priv->phandle->workqueue, &priv->phandle->main_work);
break;
case MLAN_EVENT_ID_DRV_FLUSH_RX_WORK:
if (moal_extflg_isset(priv->phandle, EXT_NAPI)) {
napi_synchronize(&priv->phandle->napi_rx);
break;
}
flush_workqueue(priv->phandle->rx_workqueue);
break;
case MLAN_EVENT_ID_DRV_FLUSH_MAIN_WORK:
flush_workqueue(priv->phandle->workqueue);
break;
case MLAN_EVENT_ID_DRV_DEFER_RX_WORK:
if (moal_extflg_isset(priv->phandle, EXT_NAPI)) {
napi_schedule(&priv->phandle->napi_rx);
break;
}
queue_work(priv->phandle->rx_workqueue,
&priv->phandle->rx_work);
break;
case MLAN_EVENT_ID_DRV_DBG_DUMP:
priv->phandle->driver_status = MTRUE;
ref_handle = (moal_handle *)priv->phandle->pref_mac;
if (ref_handle)
ref_handle->driver_status = MTRUE;
#ifdef DEBUG_LEVEL1
if (drvdbg & MFW_D)
auto_fw_dump = MTRUE;
#endif
woal_moal_debug_info(priv, NULL, MFALSE);
if (!auto_fw_dump && !handle->fw_dump)
woal_process_hang(priv->phandle);
wifi_status = WIFI_STATUS_WIFI_HANG;
break;
case MLAN_EVENT_ID_DRV_WIFI_STATUS:
wifi_status = *(t_u16 *)(pmevent->event_buf + sizeof(t_u32));
break;
case MLAN_EVENT_ID_FW_BG_SCAN:
if (priv->media_connected == MTRUE)
priv->bg_scan_start = MFALSE;
priv->bg_scan_reported = MTRUE;
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext)) {
memset(&wrqu, 0, sizeof(union iwreq_data));
wireless_send_event(priv->netdev, SIOCGIWSCAN, &wrqu,
NULL);
}
#endif
#ifdef STA_CFG80211
if (IS_STA_CFG80211(cfg80211_wext)) {
priv->last_event |= EVENT_BG_SCAN_REPORT;
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 2, 0)
if (priv->sched_scanning &&
!priv->phandle->cfg80211_suspend) {
mlan_scan_resp scan_resp;
if (MLAN_STATUS_SUCCESS ==
woal_get_scan_table(priv, MOAL_NO_WAIT,
&scan_resp))
PRINTM(MIOCTL,
"Triggered mlan get bgscan result\n");
}
#endif
if (!hw_test && priv->roaming_enabled
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 2, 0)
&& !priv->phandle->cfg80211_suspend
#endif
) {
priv->roaming_required = MTRUE;
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
#ifdef ANDROID_KERNEL
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 5, 0)
__pm_wakeup_event(&priv->phandle->ws,
ROAMING_WAKE_LOCK_TIMEOUT);
#else
wake_lock_timeout(
&priv->phandle->wake_lock,
msecs_to_jiffies(
ROAMING_WAKE_LOCK_TIMEOUT));
#endif
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
#endif
#ifdef REASSOCIATION
wake_up_interruptible(
&priv->phandle->reassoc_thread.wait_q);
#endif
} else {
#if CFG80211_VERSION_CODE > KERNEL_VERSION(2, 6, 35)
if (priv->mrvl_rssi_low) {
cfg80211_cqm_rssi_notify(
priv->netdev,
NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(4, 11, 0)
0,
#endif
GFP_KERNEL);
}
#endif
}
}
#endif
break;
case MLAN_EVENT_ID_FW_BG_SCAN_STOPPED:
#ifdef STA_CFG80211
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 2, 0)
if (IS_STA_CFG80211(cfg80211_wext)) {
if (priv->sched_scanning)
woal_bgscan_stop_event(priv);
}
#endif
#endif
break;
case MLAN_EVENT_ID_DRV_BGSCAN_RESULT:
#ifdef STA_CFG80211
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 2, 0)
if (IS_STA_CFG80211(cfg80211_wext)) {
if (priv->sched_scanning &&
!priv->phandle->cfg80211_suspend) {
woal_inform_bss_from_scan_result(priv, NULL,
MOAL_NO_WAIT);
PRINTM(MMSG,
"wlan: Report sched_scan result\n");
woal_report_sched_scan_result(priv);
priv->last_event = 0;
PRINTM(MEVENT,
"Reporting Sched_Scan results\n");
}
}
#endif
#endif
break;
#endif /* STA_SUPPORT */
case MLAN_EVENT_ID_FW_CHANNEL_REPORT_RDY:
radar_detected = pmevent->event_buf[0];
bandwidth = pmevent->event_buf[2];
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
#ifdef UAP_SUPPORT
if (priv->chan_rpt_req.chanNum && priv->chan_rpt_pending) {
radar_chan = pmevent->event_buf[1];
if (radar_detected) {
snprintf(event_buf, sizeof(event_buf) - 1,
"%s %d", CUS_EVT_RADAR_DETECTED,
radar_chan);
woal_broadcast_event(priv, event_buf,
strlen(event_buf));
} else {
snprintf(event_buf, sizeof(event_buf) - 1,
"%s %d", CUS_EVT_CAC_FINISHED,
priv->chan_rpt_req.chanNum);
woal_broadcast_event(priv, event_buf,
strlen(event_buf));
}
if (priv->bss_type == MLAN_BSS_TYPE_DFS)
woal_chan_event(priv, WOAL_EVENT_CHAN_RPT,
priv->chan_rpt_req.chanNum,
radar_detected);
}
#endif
#ifdef UAP_CFG80211
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 12, 0)
if (!IS_STA_OR_UAP_CFG80211(cfg80211_wext))
break;
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
if (priv->chan_rpt_req.chanNum && priv->chan_rpt_pending) {
priv->chan_rpt_pending = MFALSE;
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(5, 17, 0)
if (priv->radar_background) {
PRINTM(MEVENT,
"%s radar found when background CAC \n",
radar_detected ? "" : "No");
if (radar_detected)
cfg80211_background_radar_event(
priv->phandle->wiphy,
&priv->radar_background_chan,
GFP_ATOMIC);
break;
}
#endif
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
cfg_priv = woal_get_priv_with_wdev(priv->phandle);
if (cfg_priv) {
if (radar_detected)
woal_update_channels_dfs_state(
cfg_priv,
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
priv->chan_rpt_req.chanNum,
priv->chan_rpt_req.bandcfg
.chanWidth,
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
DFS_UNAVAILABLE);
else
woal_update_channels_dfs_state(
cfg_priv,
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
priv->chan_rpt_req.chanNum,
priv->chan_rpt_req.bandcfg
.chanWidth,
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
DFS_AVAILABLE);
}
#endif
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
break;
}
if (priv->phandle->is_cac_timer_set) {
PRINTM(MEVENT, "%s radar found when CAC \n",
radar_detected ? "" : "No");
moal_stop_timer(priv->phandle,
&priv->phandle->cac_timer);
priv->phandle->is_cac_timer_set = MFALSE;
if (radar_detected) {
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
cfg80211_cac_event(priv->netdev,
&priv->phandle->dfs_channel,
NL80211_RADAR_CAC_ABORTED,
GFP_KERNEL);
#else
cfg80211_cac_event(priv->netdev,
NL80211_RADAR_CAC_ABORTED,
GFP_KERNEL);
#endif
cfg80211_radar_event(
priv->wdev->wiphy,
&priv->phandle->dfs_channel,
GFP_KERNEL);
} else {
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 15, 0)
if (!priv->user_cac_period_msec) {
// host and device timer isn't sync,add
// delay to avoid kernel warning
// WARN_ON(!time_after_eq(jiffies,
// timeout)); mdelay(100); Using
// optimized delay
timeout =
(priv->wdev->cac_start_time +
msecs_to_jiffies(
priv->wdev
->cac_time_ms));
if (!time_after_eq(jiffies, timeout)) {
/* Exact time to make host and
* device timer in sync */
wait_time = timeout - jiffies;
wait_time_ms =
jiffies_to_msecs(
wait_time) +
3;
PRINTM(MEVENT,
"Waiting for %ld ms for syncing\n",
wait_time_ms);
mdelay(wait_time_ms);
}
}
#endif
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
cfg80211_cac_event(priv->netdev,
&priv->phandle->dfs_channel,
NL80211_RADAR_CAC_FINISHED,
GFP_KERNEL);
#else
cfg80211_cac_event(priv->netdev,
NL80211_RADAR_CAC_FINISHED,
GFP_KERNEL);
#endif
}
memset(&priv->phandle->dfs_channel, 0,
sizeof(struct cfg80211_chan_def));
priv->phandle->cac_bss_index = 0xff;
}
#endif /* CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 12, 0) */
#endif /* UAP_CFG80211 */
break;
case MLAN_EVENT_ID_FW_RADAR_DETECTED:
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
radar_chan = pmevent->event_buf[0];
bandwidth = pmevent->event_buf[1];
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
snprintf(event_buf, sizeof(event_buf) - 1, "%s %d",
CUS_EVT_RADAR_DETECTED, radar_chan);
woal_broadcast_event(priv, event_buf, strlen(event_buf));
PRINTM(MEVENT, "Radar detected on channel %d\n", radar_chan);
#ifdef UAP_CFG80211
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 12, 0)
if (!IS_STA_OR_UAP_CFG80211(cfg80211_wext))
break;
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(5, 17, 0)
if (priv->radar_background) {
cfg80211_background_radar_event(
priv->phandle->wiphy,
&priv->radar_background_chan, GFP_ATOMIC);
break;
}
#endif
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
cfg_priv = woal_get_priv_with_wdev(priv->phandle);
if (cfg_priv)
woal_update_channels_dfs_state(cfg_priv, radar_chan,
bandwidth,
DFS_UNAVAILABLE);
#endif
#ifdef UAP_SUPPORT
if ((priv->target_chan && priv->bss_started &&
(priv->target_chan != radar_chan)) ||
priv->backup_chan) {
PRINTM(MEVENT, "Move to target or backup chan %d %d\n",
priv->target_chan, priv->backup_chan);
woal_move_to_next_channel(priv);
priv->target_chan = 0;
break;
}
if (priv->bss_type == MLAN_BSS_TYPE_DFS) {
woal_chan_event(priv, WOAL_EVENT_RADAR,
priv->chan_rpt_req.chanNum, MTRUE);
break;
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
}
#endif
if (priv->phandle->is_cac_timer_set) {
if (priv->bss_index == priv->phandle->cac_bss_index) {
PRINTM(MEVENT, "radar detected during CAC \n");
woal_cancel_timer(&priv->phandle->cac_timer);
priv->phandle->is_cac_timer_set = MFALSE;
/* downstream: cancel the unfinished CAC in
* Firmware*/
woal_11h_cancel_chan_report_ioctl(priv,
MOAL_NO_WAIT);
/* upstream: inform cfg80211 */
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
cfg80211_cac_event(priv->netdev,
&priv->phandle->dfs_channel,
NL80211_RADAR_CAC_ABORTED,
GFP_KERNEL);
#else
cfg80211_cac_event(priv->netdev,
NL80211_RADAR_CAC_ABORTED,
GFP_KERNEL);
#endif
cfg80211_radar_event(
priv->wdev->wiphy,
&priv->phandle->dfs_channel,
GFP_KERNEL);
memset(&priv->phandle->dfs_channel, 0,
sizeof(priv->phandle->dfs_channel));
priv->phandle->cac_bss_index = 0xff;
} else {
PRINTM(MERROR,
" Radar event for incorrect inferface \n");
}
} else {
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
if (moal_extflg_isset(priv->phandle, EXT_DFS_OFFLOAD))
woal_cfg80211_dfs_vendor_event(
priv, event_dfs_radar_detected,
&priv->chan);
else {
#endif
if (priv->uap_host_based && priv->bss_started)
cfg80211_radar_event(priv->wdev->wiphy,
&priv->chan,
GFP_KERNEL);
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
}
#endif
}
#endif /* CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 12, 0 */
#endif /* UAP_CFG80211 */
break;
case MLAN_EVENT_ID_FW_CHANNEL_SWITCH_ANN:
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext))
woal_send_iwevcustom_event(priv,
CUS_EVT_CHANNEL_SWITCH_ANN);
#endif
woal_broadcast_event(priv, CUS_EVT_CHANNEL_SWITCH_ANN,
strlen(CUS_EVT_CHANNEL_SWITCH_ANN));
break;
case MLAN_EVENT_ID_FW_CHAN_SWITCH_COMPLETE:
#if defined(UAP_CFG80211) || defined(STA_CFG80211)
pchan_info = (chan_band_info *)pmevent->event_buf;
#ifdef UAP_SUPPORT
if (priv->bss_role == MLAN_BSS_ROLE_UAP) {
if (priv->uap_tx_blocked) {
if (!netif_carrier_ok(priv->netdev))
netif_carrier_on(priv->netdev);
woal_start_queue(priv->netdev);
priv->uap_tx_blocked = MFALSE;
}
priv->phandle->chsw_wait_q_woken = MTRUE;
wake_up_interruptible(&priv->phandle->chsw_wait_q);
}
#endif
snprintf(event_buf, sizeof(event_buf) - 1, "%s %d",
CUS_EVT_CHAN_SWITCH_COMPLETE, pchan_info->channel);
woal_broadcast_event(priv, event_buf, strlen(event_buf));
if (IS_STA_OR_UAP_CFG80211(cfg80211_wext)) {
PRINTM(MMSG,
"CSA/ECSA: Switch to new channel %d complete!\n",
pchan_info->channel);
#ifdef UAP_CFG80211
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 12, 0)
if (priv->csa_chan.chan &&
(pchan_info->channel ==
priv->csa_chan.chan->hw_value)) {
moal_memcpy_ext(
priv->phandle, &priv->chan,
&priv->csa_chan,
sizeof(struct cfg80211_chan_def),
sizeof(struct cfg80211_chan_def));
}
#endif
#endif
if (priv->channel == pchan_info->channel)
break;
priv->channel = pchan_info->channel;
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)
if (MFALSE
#ifdef UAP_CFG80211
|| priv->uap_host_based
#endif
#ifdef STA_CFG80211
|| priv->sme_current.ssid_len
#endif
) {
PRINTM(MEVENT,
"CHAN_SWITCH: 11n=%d, chan=%d, center_chan=%d, band=%d, width=%d, 2Offset=%d\n",
pchan_info->is_11n_enabled,
pchan_info->channel,
pchan_info->center_chan,
pchan_info->bandcfg.chanBand,
pchan_info->bandcfg.chanWidth,
pchan_info->bandcfg.chan2Offset);
woal_channel_switch_event(priv, pchan_info);
}
#endif
}
#endif
break;
case MLAN_EVENT_ID_FW_STOP_TX:
woal_stop_queue(priv->netdev);
if (netif_carrier_ok(priv->netdev))
netif_carrier_off(priv->netdev);
break;
case MLAN_EVENT_ID_FW_START_TX:
if (!netif_carrier_ok(priv->netdev))
netif_carrier_on(priv->netdev);
woal_wake_queue(priv->netdev);
break;
case MLAN_EVENT_ID_FW_HS_WAKEUP:
/* simulate HSCFG_CANCEL command */
woal_cancel_hs(priv, MOAL_NO_WAIT);
#ifdef STA_SUPPORT
pmpriv = woal_get_priv((moal_handle *)pmoal, MLAN_BSS_ROLE_STA);
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext) && pmpriv)
woal_send_iwevcustom_event(pmpriv, CUS_EVT_HS_WAKEUP);
#endif /* STA_WEXT */
if (pmpriv)
woal_broadcast_event(pmpriv, CUS_EVT_HS_WAKEUP,
strlen(CUS_EVT_HS_WAKEUP));
#endif /*STA_SUPPORT */
#ifdef UAP_SUPPORT
pmpriv = woal_get_priv((moal_handle *)pmoal, MLAN_BSS_ROLE_UAP);
if (pmpriv) {
pmevent->event_id = UAP_EVENT_ID_HS_WAKEUP;
woal_broadcast_event(pmpriv, (t_u8 *)&pmevent->event_id,
sizeof(t_u32));
}
#endif /* UAP_SUPPORT */
break;
case MLAN_EVENT_ID_DRV_HS_ACTIVATED:
#ifdef STA_SUPPORT
pmpriv = woal_get_priv((moal_handle *)pmoal, MLAN_BSS_ROLE_STA);
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext) && pmpriv)
woal_send_iwevcustom_event(pmpriv,
CUS_EVT_HS_ACTIVATED);
#endif /* STA_WEXT */
if (pmpriv)
woal_broadcast_event(pmpriv, CUS_EVT_HS_ACTIVATED,
strlen(CUS_EVT_HS_ACTIVATED));
#endif /* STA_SUPPORT */
#if defined(UAP_SUPPORT)
pmpriv = woal_get_priv((moal_handle *)pmoal, MLAN_BSS_ROLE_UAP);
if (pmpriv) {
pmevent->event_id = UAP_EVENT_ID_DRV_HS_ACTIVATED;
woal_broadcast_event(pmpriv, (t_u8 *)&pmevent->event_id,
sizeof(t_u32));
}
#endif
memset(&pm_info, 0, sizeof(mlan_ds_ps_info));
if (priv->phandle->suspend_fail == MFALSE) {
woal_get_pm_info(priv, &pm_info);
if (pm_info.is_suspend_allowed == MTRUE) {
priv->phandle->hs_activated = MTRUE;
#ifdef MMC_PM_FUNC_SUSPENDED
woal_wlan_is_suspended(priv->phandle);
#endif
}
priv->phandle->hs_activate_wait_q_woken = MTRUE;
wake_up(&priv->phandle->hs_activate_wait_q);
}
break;
case MLAN_EVENT_ID_DRV_HS_DEACTIVATED:
#ifdef STA_SUPPORT
pmpriv = woal_get_priv((moal_handle *)pmoal, MLAN_BSS_ROLE_STA);
#ifdef STA_WEXT
if (IS_STA_WEXT(cfg80211_wext) && pmpriv)
woal_send_iwevcustom_event(pmpriv,
CUS_EVT_HS_DEACTIVATED);
#endif /* STA_WEXT */
if (pmpriv)
woal_broadcast_event(pmpriv, CUS_EVT_HS_DEACTIVATED,
strlen(CUS_EVT_HS_DEACTIVATED));
#endif /* STA_SUPPORT */
#if defined(UAP_SUPPORT)
pmpriv = woal_get_priv((moal_handle *)pmoal, MLAN_BSS_ROLE_UAP);
if (pmpriv) {
pmevent->event_id = UAP_EVENT_ID_DRV_HS_DEACTIVATED;
woal_broadcast_event(pmpriv, (t_u8 *)&pmevent->event_id,
sizeof(t_u32));
}
#endif
priv->phandle->hs_activated = MFALSE;
break;
#ifdef UAP_SUPPORT
case MLAN_EVENT_ID_UAP_FW_BSS_START:
woal_hist_data_reset(priv);
priv->bss_started = MTRUE;
priv->skip_cac = MFALSE;
if (!netif_carrier_ok(priv->netdev))
netif_carrier_on(priv->netdev);
woal_start_queue(priv->netdev);
moal_memcpy_ext(priv->phandle, priv->current_addr,
pmevent->event_buf + 6, ETH_ALEN, ETH_ALEN);
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 16, 0)
eth_hw_addr_set(priv->netdev, priv->current_addr);
#else
moal_memcpy_ext(priv->phandle, priv->netdev->dev_addr,
priv->current_addr, ETH_ALEN, ETH_ALEN);
#endif
woal_broadcast_event(priv, pmevent->event_buf,
pmevent->event_len);
#ifdef STA_SUPPORT
#ifdef STA_CFG80211
pmpriv = woal_get_priv((moal_handle *)pmoal, MLAN_BSS_ROLE_STA);
if (IS_STA_CFG80211(cfg80211_wext) && pmpriv)
woal_set_scan_time(pmpriv, ACTIVE_SCAN_CHAN_TIME,
PASSIVE_SCAN_CHAN_TIME,
MIN_SPECIFIC_SCAN_CHAN_TIME);
#endif
#endif
#ifdef UAP_CFG80211
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 12, 0)
if (priv->chan_under_nop) {
PRINTM(MMSG,
"Channel Under Nop: notify cfg80211 new channel=%d\n",
priv->channel);
#if ((CFG80211_VERSION_CODE >= KERNEL_VERSION(5, 19, 2)) || IMX_ANDROID_13)
cfg80211_ch_switch_notify(priv->netdev, &priv->chan, 0);
#else
cfg80211_ch_switch_notify(priv->netdev, &priv->chan);
#endif
priv->chan_under_nop = MFALSE;
}
#endif
#endif
break;
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 5, 0)
case MLAN_EVENT_ID_DRV_UAP_CHAN_INFO:
#ifdef UAP_CFG80211
if (IS_UAP_CFG80211(cfg80211_wext)) {
pchan_info = (chan_band_info *)pmevent->event_buf;
PRINTM(MEVENT,
"UAP: 11n=%d, chan=%d, center_chan=%d, band=%d, width=%d, 2Offset=%d\n",
pchan_info->is_11n_enabled, pchan_info->channel,
pchan_info->center_chan,
pchan_info->bandcfg.chanBand,
pchan_info->bandcfg.chanWidth,
pchan_info->bandcfg.chan2Offset);
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
if (priv->uap_host_based &&
(priv->channel != pchan_info->channel))
woal_channel_switch_event(priv, pchan_info);
}
#endif
break;
#endif
case MLAN_EVENT_ID_UAP_FW_BSS_ACTIVE:
priv->media_connected = MTRUE;
if (!netif_carrier_ok(priv->netdev))
netif_carrier_on(priv->netdev);
woal_wake_queue(priv->netdev);
woal_broadcast_event(priv, pmevent->event_buf,
pmevent->event_len);
moal_connection_status_check_pmqos(pmoal);
break;
case MLAN_EVENT_ID_UAP_FW_BSS_IDLE:
priv->media_connected = MFALSE;
woal_broadcast_event(priv, pmevent->event_buf,
pmevent->event_len);
moal_connection_status_check_pmqos(pmoal);
break;
case MLAN_EVENT_ID_UAP_FW_MIC_COUNTERMEASURES: {
t_u16 status = 0;
status = *(t_u16 *)(pmevent->event_buf + 4);
if (status) {
priv->media_connected = MFALSE;
woal_stop_queue(priv->netdev);
if (netif_carrier_ok(priv->netdev))
netif_carrier_off(priv->netdev);
} else {
priv->media_connected = MTRUE;
if (!netif_carrier_ok(priv->netdev))
netif_carrier_on(priv->netdev);
woal_wake_queue(priv->netdev);
}
woal_broadcast_event(priv, pmevent->event_buf,
pmevent->event_len);
} break;
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(2, 6, 39)
case MLAN_EVENT_ID_FW_REMAIN_ON_CHAN_EXPIRED:
if (IS_STA_OR_UAP_CFG80211(cfg80211_wext)) {
PRINTM(MEVENT,
"FW_REMAIN_ON_CHANNEL_EXPIRED cookie = %#llx\n",
priv->phandle->cookie);
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)
if (priv->host_mlme &&
(priv->auth_flag & HOST_MLME_AUTH_PENDING)) {
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 11, 0)
if (priv->assoc_bss) {
PRINTM(MEVENT,
"wlan: HostMlme auth timeout\n");
cfg80211_auth_timeout(
priv->netdev,
priv->assoc_bss->bssid);
}
#endif
priv->auth_flag = 0;
priv->host_mlme = MFALSE;
priv->auth_alg = 0xFFFF;
}
#endif
priv->phandle->remain_on_channel = MFALSE;
if (priv->phandle->cookie &&
!priv->phandle->is_remain_timer_set) {
cfg80211_remain_on_channel_expired(
#if CFG80211_VERSION_CODE < KERNEL_VERSION(3, 6, 0)
priv->netdev,
#else
priv->wdev,
#endif
priv->phandle->cookie,
&priv->phandle->chan,
#if CFG80211_VERSION_CODE < KERNEL_VERSION(3, 8, 0)
priv->phandle->channel_type,
#endif
GFP_ATOMIC);
priv->phandle->cookie = 0;
}
}
break;
#endif
#endif
case MLAN_EVENT_ID_UAP_FW_STA_CONNECT:
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
if (IS_STA_OR_UAP_CFG80211(cfg80211_wext)) {
struct station_info *sinfo = NULL;
t_u8 addr[ETH_ALEN];
sinfo = kzalloc(sizeof(struct station_info),
GFP_ATOMIC);
if (sinfo) {
sinfo->filled = 0;
sinfo->generation = 0;
/* copy the station mac address */
memset(addr, 0xFF, ETH_ALEN);
moal_memcpy_ext(priv->phandle, addr,
pmevent->event_buf, ETH_ALEN,
ETH_ALEN);
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 2, 0)
if (pmevent->event_len > ETH_ALEN) {
#if CFG80211_VERSION_CODE < KERNEL_VERSION(4, 0, 0)
/* set station info filled flag */
sinfo->filled |=
STATION_INFO_ASSOC_REQ_IES;
#endif
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(4, 18, 0)
sinfo->pertid = NULL;
#endif
/* get the assoc request ies and length
*/
sinfo->assoc_req_ies =
(const t_u8
*)(pmevent->event_buf +
ETH_ALEN);
sinfo->assoc_req_ies_len =
pmevent->event_len - ETH_ALEN;
}
#endif /* KERNEL_VERSION */
if (priv->netdev && priv->wdev)
cfg80211_new_sta(priv->netdev,
(t_u8 *)addr, sinfo,
GFP_KERNEL);
kfree(sinfo);
}
}
#endif /* UAP_CFG80211 */
memmove((pmevent->event_buf + strlen(CUS_EVT_STA_CONNECTED) +
1),
pmevent->event_buf, pmevent->event_len);
moal_memcpy_ext(priv->phandle, pmevent->event_buf,
(t_u8 *)CUS_EVT_STA_CONNECTED,
strlen(CUS_EVT_STA_CONNECTED),
strlen(CUS_EVT_STA_CONNECTED));
pmevent->event_buf[strlen(CUS_EVT_STA_CONNECTED)] = 0;
woal_broadcast_event(priv, pmevent->event_buf,
pmevent->event_len +
strlen(CUS_EVT_STA_CONNECTED));
#ifdef UAP_WEXT
if (IS_UAP_WEXT(cfg80211_wext)) {
memset(&wrqu, 0, sizeof(union iwreq_data));
wrqu.data.pointer = (t_u8 __user *)pmevent->event_buf;
if ((pmevent->event_len +
strlen(CUS_EVT_STA_CONNECTED) + 1) > IW_CUSTOM_MAX)
wrqu.data.length =
ETH_ALEN +
strlen(CUS_EVT_STA_CONNECTED) + 1;
else
wrqu.data.length =
pmevent->event_len +
strlen(CUS_EVT_STA_CONNECTED) + 1;
wireless_send_event(priv->netdev, IWEVCUSTOM, &wrqu,
pmevent->event_buf);
}
#endif /* UAP_WEXT */
break;
case MLAN_EVENT_ID_UAP_FW_STA_DISCONNECT:
#ifdef UAP_CFG80211
if (IS_UAP_CFG80211(cfg80211_wext)) {
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 0, 0)
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)
/**Forward Deauth, Auth and disassoc frame to Host*/
if (moal_extflg_isset(priv->phandle, EXT_HOST_MLME)) {
t_u16 reason_code = woal_le16_to_cpu(
*(t_u16 *)pmevent->event_buf);
PRINTM(MCMND, "deauth reason code =0x%x\n",
reason_code);
/** BIT 14 indicate deauth is initiated by FW */
if (reason_code & MBIT(14))
woal_host_mlme_disconnect(
priv, 0,
pmevent->event_buf + 2);
} else
#endif
if (priv->netdev && priv->wdev)
cfg80211_del_sta(priv->netdev,
pmevent->event_buf + 2,
GFP_KERNEL);
#endif /* KERNEL_VERSION */
}
#endif /* UAP_CFG80211 */
memmove((pmevent->event_buf + strlen(CUS_EVT_STA_DISCONNECTED) +
1),
pmevent->event_buf, pmevent->event_len);
moal_memcpy_ext(priv->phandle, pmevent->event_buf,
(t_u8 *)CUS_EVT_STA_DISCONNECTED,
strlen(CUS_EVT_STA_DISCONNECTED),
strlen(CUS_EVT_STA_DISCONNECTED));
pmevent->event_buf[strlen(CUS_EVT_STA_DISCONNECTED)] = 0;
woal_broadcast_event(priv, pmevent->event_buf,
pmevent->event_len +
strlen(CUS_EVT_STA_DISCONNECTED));
#ifdef UAP_WEXT
if (IS_UAP_WEXT(cfg80211_wext)) {
memset(&wrqu, 0, sizeof(union iwreq_data));
wrqu.data.pointer = (t_u8 __user *)pmevent->event_buf;
wrqu.data.length = pmevent->event_len +
strlen(CUS_EVT_STA_DISCONNECTED) + 1;
wireless_send_event(priv->netdev, IWEVCUSTOM, &wrqu,
pmevent->event_buf);
}
#endif /* UAP_WEXT */
break;
case MLAN_EVENT_ID_DRV_MGMT_FRAME:
#ifdef UAP_WEXT
if (IS_UAP_WEXT(cfg80211_wext)) {
woal_broadcast_event(priv, pmevent->event_buf,
pmevent->event_len);
}
#endif /* UAP_WEXT */
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
if (IS_STA_OR_UAP_CFG80211(cfg80211_wext)) {
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(2, 6, 39)
if (priv->netdev &&
priv->netdev->ieee80211_ptr->wiphy->mgmt_stypes &&
priv->mgmt_subtype_mask) {
/* frmctl + durationid + addr1 + addr2 + addr3 +
* seqctl */
#define PACKET_ADDR4_POS (2 + 2 + 6 + 6 + 6 + 2)
t_u8 *pkt;
int freq =
priv->phandle->remain_on_channel ?
priv->phandle->chan.center_freq :
woal_get_active_intf_freq(priv);
if (!freq) {
if (!priv->phandle->chan.center_freq) {
PRINTM(MINFO,
"Skip to report mgmt packet to cfg80211\n");
break;
}
freq = priv->phandle->chan.center_freq;
}
pkt = ((t_u8 *)pmevent->event_buf +
sizeof(pmevent->event_id));
/* move addr4 */
memmove(pkt + PACKET_ADDR4_POS,
pkt + PACKET_ADDR4_POS + ETH_ALEN,
pmevent->event_len -
sizeof(pmevent->event_id) -
PACKET_ADDR4_POS - ETH_ALEN);
#ifdef WIFI_DIRECT_SUPPORT
if (ieee80211_is_action(
((struct ieee80211_mgmt *)pkt)
->frame_control))
woal_cfg80211_display_p2p_actframe(
pkt,
pmevent->event_len -
sizeof(pmevent->event_id) -
MLAN_MAC_ADDR_LENGTH,
ieee80211_get_channel(
priv->wdev->wiphy,
freq),
MFALSE);
#endif
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)
/**Forward Deauth, Auth and disassoc frame to
* Host*/
if (priv->host_mlme &&
(GET_BSS_ROLE(priv) != MLAN_BSS_ROLE_UAP) &&
(ieee80211_is_deauth(
((struct ieee80211_mgmt *)pkt)
->frame_control) ||
ieee80211_is_auth(
((struct ieee80211_mgmt *)pkt)
->frame_control) ||
ieee80211_is_disassoc(
((struct ieee80211_mgmt *)pkt)
->frame_control))) {
if (ieee80211_is_auth(
((struct ieee80211_mgmt *)
pkt)
->frame_control)) {
priv->auth_tx_cnt = 0;
PRINTM(MEVENT,
"HostMlme %s: Received auth frame type = 0x%x\n",
priv->netdev->name,
priv->auth_alg);
if (priv->auth_flag &
HOST_MLME_AUTH_PENDING) {
if (priv->auth_alg !=
WLAN_AUTH_SAE) {
priv->auth_flag &=
~HOST_MLME_AUTH_PENDING;
priv->auth_flag |=
HOST_MLME_AUTH_DONE;
priv->phandle
->host_mlme_priv =
priv;
queue_work(
priv->phandle
->evt_workqueue,
&priv->phandle
->host_mlme_work);
}
} else {
PRINTM(MERROR,
"HostMlme %s: Drop auth frame, auth_flag=0x%x auth_alg=0x%x\n",
priv->netdev
->name,
priv->auth_flag,
priv->auth_alg);
break;
}
} else {
PRINTM(MEVENT,
"HostMlme %s: Receive deauth/disassociate\n",
priv->netdev->name);
#if ((CFG80211_VERSION_CODE >= KERNEL_VERSION(5, 19, 2)) || IMX_ANDROID_13)
if (!priv->wdev->connected) {
#else
if (!priv->wdev->current_bss) {
#endif
PRINTM(MEVENT,
"HostMlme: Drop deauth/disassociate, current_bss = null\n");
break;
}
if (ieee80211_is_deauth(
((struct ieee80211_mgmt
*)pkt)
->frame_control)) {
/* subtype 12 deauth
* packet */
priv->deauth_evt_cnt++;
#define MAX_DEAUTH_COUNTER 5
if (priv->deauth_evt_cnt >=
MAX_DEAUTH_COUNTER) {
if (woal_reset_wifi(
priv->phandle,
priv->deauth_evt_cnt,
"EAPOL timeout") ==
MLAN_STATUS_SUCCESS) {
priv->deauth_evt_cnt =
0;
}
}
}
priv->cfg_disconnect = MTRUE;
woal_mgmt_frame_register(
priv,
IEEE80211_STYPE_DEAUTH,
MFALSE);
woal_mgmt_frame_register(
priv,
IEEE80211_STYPE_DISASSOC,
MFALSE);
woal_send_disconnect_to_system(
priv,
DEF_DEAUTH_REASON_CODE);
priv->host_mlme = MFALSE;
priv->auth_flag = 0;
priv->auth_alg = 0xFFFF;
}
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 11, 0)
woal_rx_mgmt_pkt_event(
priv, pkt,
pmevent->event_len -
sizeof(pmevent->event_id) -
MLAN_MAC_ADDR_LENGTH);
#else
if (ieee80211_is_deauth(
((struct ieee80211_mgmt *)
pkt)
->frame_control))
cfg80211_send_deauth(
priv->netdev, pkt,
pmevent->event_len -
sizeof(pmevent->event_id) -
MLAN_MAC_ADDR_LENGTH);
else if (ieee80211_is_auth(
((struct ieee80211_mgmt
*)pkt)
->frame_control))
cfg80211_send_rx_auth(
priv->netdev, pkt,
pmevent->event_len -
sizeof(pmevent->event_id) -
MLAN_MAC_ADDR_LENGTH);
else if (ieee80211_is_disassoc(
((struct ieee80211_mgmt
*)pkt)
->frame_control))
cfg80211_send_disassoc(
priv->netdev, pkt,
pmevent->event_len -
sizeof(pmevent->event_id) -
MLAN_MAC_ADDR_LENGTH);
#endif
} else
#endif
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 4, 0)
cfg80211_rx_mgmt(
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 6, 0)
priv->wdev,
#else
priv->netdev,
#endif
freq, 0,
((const t_u8 *)
pmevent->event_buf) +
sizeof(pmevent->event_id),
pmevent->event_len -
sizeof(pmevent->event_id) -
MLAN_MAC_ADDR_LENGTH
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 12, 0)
,
0
#endif
#if CFG80211_VERSION_CODE < KERNEL_VERSION(3, 18, 0)
,
GFP_ATOMIC
#endif
);
#else
cfg80211_rx_mgmt(
priv->netdev, freq,
((const t_u8 *)pmevent->event_buf) +
sizeof(pmevent->event_id),
pmevent->event_len -
sizeof(pmevent->event_id) -
MLAN_MAC_ADDR_LENGTH,
GFP_ATOMIC);
#endif
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
woal_packet_fate_monitor(
priv, PACKET_TYPE_RX,
RX_PKT_FATE_SUCCESS,
FRAME_TYPE_80211_MGMT, 0, 0,
((t_u8 *)pmevent->event_buf) +
sizeof(pmevent->event_id),
pmevent->event_len -
sizeof(pmevent->event_id) -
MLAN_MAC_ADDR_LENGTH);
#endif
#endif
}
#endif /* KERNEL_VERSION */
}
#endif /* STA_CFG80211 || UAP_CFG80211 */
break;
#endif /* UAP_SUPPORT */
case MLAN_EVENT_ID_DRV_PASSTHRU:
woal_broadcast_event(priv, pmevent->event_buf,
pmevent->event_len);
break;
case MLAN_EVENT_ID_DRV_ASSOC_FAILURE_REPORT:
PRINTM(MINFO, "Assoc result\n");
if (priv->media_connected) {
PRINTM(MINFO, "Assoc_Rpt: Media Connected\n");
if (!netif_carrier_ok(priv->netdev)) {
PRINTM(MINFO, "Assoc_Rpt: Carrier On\n");
netif_carrier_on(priv->netdev);
}
PRINTM(MINFO, "Assoc_Rpt: Queue Start\n");
woal_wake_queue(priv->netdev);
}
break;
case MLAN_EVENT_ID_DRV_MEAS_REPORT:
/* We have received measurement report, wakeup measurement wait
* queue */
PRINTM(MINFO, "Measurement Report\n");
/* Going out of CAC checking period */
if (priv->phandle->cac_period == MTRUE) {
priv->phandle->cac_period = MFALSE;
if (priv->phandle->meas_wait_q_woken == MFALSE) {
priv->phandle->meas_wait_q_woken = MTRUE;
wake_up_interruptible(
&priv->phandle->meas_wait_q);
}
/* Execute delayed BSS START command */
if (priv->phandle->delay_bss_start == MTRUE) {
mlan_ioctl_req *req = NULL;
mlan_ds_bss *bss = NULL;
/* Clear flag */
priv->phandle->delay_bss_start = MFALSE;
PRINTM(MMSG,
"Now CAC measure period end. Execute delayed BSS Start command.\n");
req = woal_alloc_mlan_ioctl_req(
sizeof(mlan_ds_bss));
if (!req) {
PRINTM(MERROR,
"Failed to allocate ioctl request buffer\n");
goto done;
}
bss = (mlan_ds_bss *)req->pbuf;
req->req_id = MLAN_IOCTL_BSS;
req->action = MLAN_ACT_SET;
bss->sub_command = MLAN_OID_BSS_START;
moal_memcpy_ext(
priv->phandle, &bss->param.ssid_bssid,
&priv->phandle->delay_ssid_bssid,
sizeof(mlan_ssid_bssid),
sizeof(mlan_ssid_bssid));
if (woal_request_ioctl(priv, req,
MOAL_NO_WAIT) !=
MLAN_STATUS_PENDING) {
PRINTM(MERROR,
"Delayed BSS Start operation failed!\n");
kfree(req);
}
PRINTM(MMSG, "BSS START Complete!\n");
}
#ifdef UAP_SUPPORT
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
if (priv->uap_host_based &&
moal_extflg_isset(priv->phandle, EXT_DFS_OFFLOAD))
woal_cfg80211_dfs_vendor_event(
priv, event_dfs_cac_finished,
&priv->chan);
#endif
#endif
#endif
}
break;
case MLAN_EVENT_ID_DRV_TDLS_TEARDOWN_REQ:
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)
#ifdef STA_CFG80211
if (IS_STA_CFG80211(cfg80211_wext)) {
tdls_tear_down_event *tdls_event =
(tdls_tear_down_event *)pmevent->event_buf;
cfg80211_tdls_oper_request(priv->netdev,
tdls_event->peer_mac_addr,
NL80211_TDLS_TEARDOWN,
tdls_event->reason_code,
GFP_KERNEL);
}
#endif
#endif
break;
case MLAN_EVENT_ID_FW_TX_STATUS: {
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
unsigned long flag;
tx_status_event *tx_status =
(tx_status_event *)(pmevent->event_buf + 4);
struct tx_status_info *tx_info = NULL;
PRINTM(MINFO,
"Receive Tx status: tx_token=%d, pkt_type=0x%x, status=%d tx_seq_num=%d\n",
tx_status->tx_token_id, tx_status->packet_type,
tx_status->status, priv->tx_seq_num);
spin_lock_irqsave(&priv->tx_stat_lock, flag);
tx_info = woal_get_tx_info(priv, tx_status->tx_token_id);
if (tx_info) {
bool ack;
struct sk_buff *skb = (struct sk_buff *)tx_info->tx_skb;
list_del(&tx_info->link);
spin_unlock_irqrestore(&priv->tx_stat_lock, flag);
if (!tx_status->status)
ack = true;
else
ack = false;
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
if (priv->phandle->remain_on_channel &&
tx_info->cancel_remain_on_channel) {
remain_priv =
priv->phandle->priv
[priv->phandle->remain_bss_index];
if (remain_priv) {
woal_cfg80211_remain_on_channel_cfg(
remain_priv, MOAL_NO_WAIT,
MTRUE, &channel_status, NULL, 0,
0);
priv->phandle->remain_on_channel =
MFALSE;
}
}
#endif
PRINTM(MEVENT, "Wlan: Tx status=%d\n", ack);
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
if (tx_info->tx_cookie) {
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(2, 6, 37)
#if CFG80211_VERSION_CODE < KERNEL_VERSION(3, 6, 0)
cfg80211_mgmt_tx_status(priv->netdev,
tx_info->tx_cookie,
skb->data, skb->len,
ack, GFP_ATOMIC);
#else
cfg80211_mgmt_tx_status(priv->wdev,
tx_info->tx_cookie,
skb->data, skb->len,
ack, GFP_ATOMIC);
#endif
#endif
}
#if defined(STA_CFG80211) || defined(UAP_CFG80211)
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
woal_packet_fate_monitor(priv, PACKET_TYPE_TX,
ack ? TX_PKT_FATE_ACKED :
TX_PKT_FATE_SENT,
FRAME_TYPE_80211_MGMT, 0, 0,
skb->data, skb->len);
#endif
#endif
#endif
dev_kfree_skb_any(skb);
kfree(tx_info);
} else {
spin_unlock_irqrestore(&priv->tx_stat_lock, flag);
}
#endif
} break;
case MLAN_EVENT_ID_DRV_FT_RESPONSE:
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
if (priv->phandle->fw_roam_enable)
break;
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 10, 0)
#ifdef STA_CFG80211
if (IS_STA_CFG80211(cfg80211_wext)) {
struct cfg80211_ft_event_params ft_event;
if (priv->ft_pre_connect)
break;
memset(&ft_event, 0,
sizeof(struct cfg80211_ft_event_params));
PRINTM(MMSG,
"wlan : FT response target AP " MACSTR "\n",
MAC2STR((t_u8 *)pmevent->event_buf));
DBG_HEXDUMP(MDAT_D, "FT-event ", pmevent->event_buf,
pmevent->event_len);
moal_memcpy_ext(priv->phandle, priv->target_ap_bssid,
pmevent->event_buf, ETH_ALEN, ETH_ALEN);
ft_event.target_ap = priv->target_ap_bssid;
ft_event.ies = pmevent->event_buf + ETH_ALEN;
ft_event.ies_len = pmevent->event_len - ETH_ALEN;
/*TSPEC info is needed by RIC, However the TS operation
* is configured by mlanutl*/
/*So do not add RIC temporally*/
/*when add RIC, 1. query TS status, 2. copy tspec from
* addts command*/
ft_event.ric_ies = NULL;
ft_event.ric_ies_len = 0;
cfg80211_ft_event(priv->netdev, &ft_event);
priv->ft_pre_connect = MTRUE;
if (priv->ft_roaming_triggered_by_driver ||
!(priv->ft_cap & MBIT(0))) {
priv->ft_wait_condition = MTRUE;
wake_up(&priv->ft_wait_q);
}
}
#endif
#endif
break;
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
case MLAN_EVENT_ID_FW_ROAM_OFFLOAD_RESULT:
#ifdef STA_CFG80211
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
woal_cfg80211_vendor_event(priv, event_set_key_mgmt_offload,
&enable, sizeof(enable));
#endif
moal_memcpy_ext(priv->phandle, priv->cfg_bssid,
pmevent->event_buf, ETH_ALEN, ETH_ALEN);
tlv = (MrvlIEtypesHeader_t *)((t_u8 *)pmevent->event_buf +
MLAN_MAC_ADDR_LENGTH);
tlv_buf_left = pmevent->event_len - MLAN_MAC_ADDR_LENGTH;
while (tlv_buf_left >= sizeof(MrvlIEtypesHeader_t)) {
tlv_type = woal_le16_to_cpu(tlv->type);
tlv_len = woal_le16_to_cpu(tlv->len);
if (tlv_buf_left <
(tlv_len + sizeof(MrvlIEtypesHeader_t))) {
PRINTM(MERROR,
"Error processing firmware roam success TLVs, bytes left < TLV length\n");
break;
}
switch (tlv_type) {
case TLV_TYPE_APINFO:
pinfo = (apinfo *)tlv;
break;
case TLV_TYPE_ASSOC_REQ_IE:
req_tlv = (apinfo *)tlv;
break;
default:
break;
}
tlv_buf_left -= tlv_len + sizeof(MrvlIEtypesHeader_t);
tlv = (MrvlIEtypesHeader_t
*)((t_u8 *)tlv + tlv_len +
sizeof(MrvlIEtypesHeader_t));
}
if (!pinfo) {
PRINTM(MERROR,
"ERROR:AP info in roaming event buffer is NULL\n");
goto done;
}
if (req_tlv) {
req_ie = req_tlv->rsp_ie;
ie_len = req_tlv->header.len;
}
woal_inform_bss_from_scan_result(priv, NULL, MOAL_NO_WAIT);
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(4, 12, 0)
roam_info =
kzalloc(sizeof(struct cfg80211_roam_info), GFP_ATOMIC);
if (roam_info) {
#if ((CFG80211_VERSION_CODE >= KERNEL_VERSION(6, 0, 0)) || IMX_ANDROID_13)
roam_info->links[0].bssid = priv->cfg_bssid;
#else
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
roam_info->bssid = priv->cfg_bssid;
#endif
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
roam_info->req_ie = req_ie;
roam_info->req_ie_len = ie_len;
roam_info->resp_ie = pinfo->rsp_ie;
roam_info->resp_ie_len = pinfo->header.len;
cfg80211_roamed(priv->netdev, roam_info, GFP_KERNEL);
kfree(roam_info);
}
#else
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 0, 0)
cfg80211_roamed(priv->netdev, NULL, priv->cfg_bssid, req_ie,
ie_len, pinfo->rsp_ie, pinfo->header.len,
GFP_KERNEL);
#else
cfg80211_roamed(priv->netdev, priv->cfg_bssid, req_ie, ie_len,
pinfo->rsp_ie, pinfo->header.len, GFP_KERNEL);
#endif
#endif
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
woal_roam_ap_info(priv, pmevent->event_buf, pmevent->event_len);
#endif
#endif
PRINTM(MMSG, "FW Roamed to bssid " MACSTR " successfully\n",
MAC2STR(pmevent->event_buf));
break;
case MLAN_EVENT_ID_CSI:
DBG_HEXDUMP(MEVT_D, "CSI dump", pmevent->event_buf,
pmevent->event_len);
#ifdef STA_CFG80211
#if CFG80211_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)
if (priv->csi_enable)
woal_cfg80211_event_csi_dump(priv, pmevent->event_buf,
pmevent->event_len);
#endif
#endif
/* Send Netlink event */
custom_len = strlen(CUS_EVT_CSI) + sizeof(priv->csi_seq);
csi_len = pmevent->event_len;
memmove(pmevent->event_buf + custom_len, pmevent->event_buf,
csi_len);
moal_memcpy_ext(priv->phandle, pmevent->event_buf, CUS_EVT_CSI,
strlen(CUS_EVT_CSI), strlen(CUS_EVT_CSI));
moal_memcpy_ext(priv->phandle,
pmevent->event_buf + strlen(CUS_EVT_CSI),
(t_u8 *)(&(priv->csi_seq)),
sizeof(priv->csi_seq), sizeof(priv->csi_seq));
woal_broadcast_event(priv, pmevent->event_buf,
custom_len + csi_len);
priv->csi_seq++;
break;
default:
break;
}
done:
LEAVE();
return MLAN_STATUS_SUCCESS;
}
/**
* @brief This function prints the debug message in mlan
*
* @param pmoal Pointer to the MOAL context
* @param level debug level
* @param pformat point to string format buf
*
* @return N/A
*/
__attribute__((format(printf, 3, 4))) t_void
moal_print(t_void *pmoal, t_u32 level, char *pformat, IN...)
{
#ifdef DEBUG_LEVEL1
va_list args;
if (level & MHEX_DUMP) {
t_u8 *buf = NULL;
int len = 0;
va_start(args, pformat);
buf = (t_u8 *)va_arg(args, t_u8 *);
len = (int)va_arg(args, int);
va_end(args);
#ifdef DEBUG_LEVEL2
if (level & MINFO)
HEXDUMP((char *)pformat, buf, len);
else
#endif /* DEBUG_LEVEL2 */
{
if (level & MERROR)
DBG_HEXDUMP(MERROR, (char *)pformat, buf, len);
if (level & MCMD_D)
DBG_HEXDUMP(MCMD_D, (char *)pformat, buf, len);
if (level & MDAT_D)
DBG_HEXDUMP(MDAT_D, (char *)pformat, buf, len);
if (level & MIF_D)
DBG_HEXDUMP(MIF_D, (char *)pformat, buf, len);
if (level & MFW_D)
DBG_HEXDUMP(MFW_D, (char *)pformat, buf, len);
if (level & MEVT_D)
DBG_HEXDUMP(MEVT_D, (char *)pformat, buf, len);
}
} else {
if (drvdbg & level) {
va_start(args, pformat);
vprintk(pformat, args);
va_end(args);
}
}
#endif /* DEBUG_LEVEL1 */
}
/**
* @brief This function prints the network interface name
*
* @param pmoal Pointer to the MOAL context
* @param bss_index BSS index
* @param level debug level
*
* @return N/A
*/
t_void moal_print_netintf(t_void *pmoal, t_u32 bss_index, t_u32 level)
{
#ifdef DEBUG_LEVEL1
moal_handle *phandle = (moal_handle *)pmoal;
if (phandle) {
if ((bss_index < MLAN_MAX_BSS_NUM) &&
phandle->priv[bss_index] &&
phandle->priv[bss_index]->netdev) {
if (drvdbg & level)
printk("%s: ",
phandle->priv[bss_index]->netdev->name);
}
}
#endif /* DEBUG_LEVEL1 */
}
/**
* @brief This function asserts the existence of the passed argument
*
* @param pmoal A pointer to moal_private structure
* @param cond Condition to check
*
* @return N/A
*/
t_void moal_assert(t_void *pmoal, t_u32 cond)
{
if (!cond) {
panic("Assert failed: Panic!");
}
}
/**
* @brief This function save the histogram data
*
* @param pmoal A pointer to moal_private structure
* @param bss_index BSS index
* @param rx_rate rx rate index
* @param snr snr
* @param nflr noise floor
* @param antenna antenna
*
* @return N/A
*/
t_void moal_hist_data_add(t_void *pmoal, t_u32 bss_index, t_u16 rx_rate,
t_s8 snr, t_s8 nflr, t_u8 antenna)
{
moal_private *priv = NULL;
priv = woal_bss_index_to_priv(pmoal, bss_index);
if (priv && antenna >= priv->phandle->card_info->histogram_table_num)
antenna = 0;
if (priv && priv->hist_data[antenna])
woal_hist_data_add(priv, rx_rate, snr, nflr, antenna);
}
/**
* @brief This function update the peer signal
*
* @param pmoal A pointer to moal_private structure
* @param bss_index BSS index
* @param peer_addr peer address
* @param snr snr
* @param nflr noise floor
*
* @return N/A
*/
t_void moal_updata_peer_signal(t_void *pmoal, t_u32 bss_index, t_u8 *peer_addr,
t_s8 snr, t_s8 nflr)
{
moal_private *priv = NULL;
struct tdls_peer *peer = NULL;
unsigned long flags;
priv = woal_bss_index_to_priv(pmoal, bss_index);
if (priv && priv->enable_auto_tdls) {
spin_lock_irqsave(&priv->tdls_lock, flags);
list_for_each_entry (peer, &priv->tdls_list, link) {
if (!memcmp(peer->peer_addr, peer_addr, ETH_ALEN)) {
peer->rssi = nflr - snr;
peer->rssi_jiffies = jiffies;
break;
}
}
spin_unlock_irqrestore(&priv->tdls_lock, flags);
}
}
/**
* @brief Performs division of 64-bit num with base
* @brief do_div does two things
* @brief 1. modifies the 64-bit num in place with
* @brief the quotient, i.e., num becomes quotient
* @brief 2. do_div() returns the 32-bit reminder
*
* @param num dividend
* @param base divisor
* @return returns 64-bit quotient
*/
t_u64 moal_do_div(t_u64 num, t_u32 base)
{
t_u64 val = num;
do_div(val, base);
return val;
}
#if defined(DRV_EMBEDDED_AUTHENTICATOR) || defined(DRV_EMBEDDED_SUPPLICANT)
/**
* @brief Performs wait event
*
* @param pmoal t_void
* @param bss_index index of priv
* @return MLAN_STATUS_SUCCESS
*/
mlan_status moal_wait_hostcmd_complete(t_void *pmoal, t_u32 bss_index)
{
mlan_status status = MLAN_STATUS_SUCCESS;
moal_handle *handle = (moal_handle *)pmoal;
moal_private *priv = woal_bss_index_to_priv(handle, bss_index);
long time_left = 0;
ENTER();
if (!priv) {
PRINTM(MERROR, "moal_wait_event: priv is null!\n");
goto done;
}
priv->hostcmd_wait_condition = MFALSE;
time_left = wait_event_timeout(priv->hostcmd_wait_q,
priv->hostcmd_wait_condition,
MOAL_IOCTL_TIMEOUT);
if (!time_left) {
PRINTM(MERROR, "moal_wait_event: wait timeout ");
status = MLAN_STATUS_FAILURE;
}
done:
LEAVE();
return status;
}
/**
* @brief wake up esa wait_q
*
* @param pmoal t_void
* @param bss_index index of priv
* @return MLAN_STATUS_SUCCESS
*/
mlan_status moal_notify_hostcmd_complete(t_void *pmoal, t_u32 bss_index)
{
mlan_status status = MLAN_STATUS_SUCCESS;
moal_handle *handle = (moal_handle *)pmoal;
moal_private *priv = woal_bss_index_to_priv(handle, bss_index);
ENTER();
priv->hostcmd_wait_condition = MTRUE;
wake_up(&priv->hostcmd_wait_q);
LEAVE();
return status;
}
#endif