mwifiex/mxm_wifiex/wlan_src/mlinux/moal_priv.h

297 lines
9.8 KiB
C
Raw Normal View History

/** @file moal_priv.h
*
* @brief This file contains definition for extended private IOCTL call.
*
*
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
* Copyright 2008-2021 NXP
*
* This software file (the File) is distributed by NXP
* under the terms of the GNU General Public License Version 2, June 1991
* (the License). You may use, redistribute and/or modify the File in
* accordance with the terms and conditions of the License, a copy of which
* is available by writing to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
* worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
*
* THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
* this warranty disclaimer.
*
*/
/********************************************************
Change log:
10/31/2008: initial version
********************************************************/
#ifndef _WOAL_PRIV_H_
#define _WOAL_PRIV_H_
/** 2K bytes */
#define WOAL_2K_BYTES 2000
/** PRIVATE CMD ID */
#define WOAL_IOCTL (SIOCIWFIRSTPRIV) /* 0x8BE0 defined in wireless.h */
/** Private command ID to set one int/get word char */
#define WOAL_SETONEINT_GETWORDCHAR (WOAL_IOCTL + 1)
/** Private command ID to get version */
#define WOAL_VERSION 1
/** Private command ID to get extended version */
#define WOAL_VEREXT 2
/** Private command ID to set/get none */
#define WOAL_SETNONE_GETNONE (WOAL_IOCTL + 2)
/** Private command ID for warm reset */
#define WOAL_WARMRESET 1
/**
* Linux Kernels later 3.9 use CONFIG_PM_RUNTIME instead of
* CONFIG_USB_SUSPEND
*/
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 10, 0)
#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 19, 0)
#ifdef CONFIG_PM
#ifndef CONFIG_USB_SUSPEND
#define CONFIG_USB_SUSPEND
#endif
#endif
#else /* LINUX_VERSION_CODE >= KERNEL_VERSION(3, 19, 0) */
#ifdef CONFIG_PM_RUNTIME
#ifndef CONFIG_USB_SUSPEND
#define CONFIG_USB_SUSPEND
#endif
#endif
#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(3, 19, 0) */
#endif
#ifdef CONFIG_USB_SUSPEND
/** Private command ID for usb suspend */
#define WOAL_USB_SUSPEND 2
/** Private command ID for usb resume */
#define WOAL_USB_RESUME 3
#endif /* CONFIG_USB_SUSPEND */
/** Private command ID to clear 11d chan table */
#define WOAL_11D_CLR_CHAN_TABLE 4
/** Private command ID to set/get sixteen int */
#define WOAL_SET_GET_SIXTEEN_INT (WOAL_IOCTL + 3)
/** Private command ID to set/get TX power configurations */
#define WOAL_TX_POWERCFG 1
#ifdef DEBUG_LEVEL1
/** Private command ID to set/get driver debug */
#define WOAL_DRV_DBG 2
#endif
/** Private command ID to set/get beacon interval */
#define WOAL_BEACON_INTERVAL 3
/** Private command ID to get RSSI */
#define WOAL_SIGNAL 5
/** Private command ID to set/get Deep Sleep mode */
#define WOAL_DEEP_SLEEP 7
/** Private command ID for 11n ht configration */
#define WOAL_11N_TX_CFG 8
/** Private command ID for 11n usr ht configration */
#define WOAL_11N_HTCAP_CFG 9
/** Private command ID for TX Aggregation */
#define WOAL_PRIO_TBL 10
/** Private command ID for Updating ADDBA variables */
#define WOAL_ADDBA_UPDT 11
/** Private command ID to set/get Host Sleep configuration */
#define WOAL_HS_CFG 12
/** Private command ID to set Host Sleep parameters */
#define WOAL_HS_SETPARA 13
/** Private command ID to read/write registers */
#define WOAL_REG_READ_WRITE 14
/** Private command ID to set/get band/adhocband */
#define WOAL_BAND_CFG 15
/** Private command ID for TX Aggregation */
#define WOAL_11N_AMSDU_AGGR_CTRL 17
/** Private command ID to set/get Inactivity timeout */
#define WOAL_INACTIVITY_TIMEOUT_EXT 18
#ifdef SDIO
/** Private command ID to turn on/off sdio clock */
#define WOAL_SDIO_CLOCK 19
/** Private command ID to read/write Command 52 */
#define WOAL_CMD_52RDWR 20
#endif
/** Private command ID to set/get scan configuration parameter */
#define WOAL_SCAN_CFG 21
/** Private command ID to set/get PS configuration parameter */
#define WOAL_PS_CFG 22
/** Private command ID to read/write memory */
#define WOAL_MEM_READ_WRITE 23
#ifdef SDIO
/** Private command ID to control SDIO MP-A */
#define WOAL_SDIO_MPA_CTRL 25
#endif
/** Private command ID for Updating ADDBA variables */
#define WOAL_ADDBA_REJECT 27
/** Private command ID to set/get sleep parameters */
#define WOAL_SLEEP_PARAMS 28
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
/** Private command ID to set/get network monitor */
#define WOAL_NET_MONITOR 30
/** Private command ID to set/get TX BF capabilities */
#define WOAL_TX_BF_CAP 31
/** Private command ID to set/get dfs testing settings */
#define WOAL_DFS_TESTING 33
/** Private command ID to set/get CFP table codes */
#define WOAL_CFP_CODE 34
/** Private command ID to set/get tx/rx antenna */
#define WOAL_SET_GET_TX_RX_ANT 35
/** Private command ID to set/get management frame passthru mask */
#define WOAL_MGMT_FRAME_CTRL 36
/** Private command ID to configure gpio independent reset */
#define WOAL_IND_RST_CFG 37
/** Private command ID to set one int/get one int */
#define WOAL_SETONEINT_GETONEINT (WOAL_IOCTL + 5)
/** Private command ID to set/get Tx rate */
#define WOAL_SET_GET_TXRATE 1
/** Private command ID to set/get region code */
#define WOAL_SET_GET_REGIONCODE 2
/** Private command ID to turn on/off radio */
#define WOAL_SET_RADIO 3
/** Private command ID to enable WMM */
#define WOAL_WMM_ENABLE 4
/** Private command ID to enable 802.11D */
#define WOAL_11D_ENABLE 5
/** Private command ID to set/get QoS configuration */
#define WOAL_SET_GET_QOS_CFG 7
#if defined(REASSOCIATION)
/** Private command ID to set/get reassociation setting */
#define WOAL_SET_GET_REASSOC 9
#endif /* REASSOCIATION */
/** Private command ID for Updating Transmit buffer configration */
#define WOAL_TXBUF_CFG 10
/** Private command ID to set/get WWS mode */
#define WOAL_SET_GET_WWS_CFG 12
/** Private command ID to set/get sleep period */
#define WOAL_SLEEP_PD 13
/** Private command ID to set/get auth type */
#define WOAL_AUTH_TYPE 18
/** Private command ID to set/get port control */
#define WOAL_PORT_CTRL 19
#ifdef WIFI_DIRECT_SUPPORT
#if defined(STA_SUPPORT) && defined(UAP_SUPPORT)
/** Private command ID for set/get BSS role */
#define WOAL_SET_GET_BSS_ROLE 21
#endif
#endif
/** Private command ID for set/get 11h local power constraint */
#define WOAL_SET_GET_11H_LOCAL_PWR_CONSTRAINT 22
/** Private command ID to set/get 11N HT stream configuration */
#define WOAL_HT_STREAM_CFG 23
/** Private command ID to set/get MAC control */
#define WOAL_MAC_CONTROL 24
/** Private command ID to get thermal value */
#define WOAL_THERMAL 25
/** Private command ID to set/get hs cfg param */
#define WOAL_CFG_HOTSPOT 26
/** Private command ID to get log */
#define WOALGETLOG (WOAL_IOCTL + 7)
/** Private command ID to set a wext address variable */
#define WOAL_SETADDR_GETNONE (WOAL_IOCTL + 8)
/** Private command ID to send deauthentication */
#define WOAL_DEAUTH 1
/** Private command to get/set 256 chars */
#define WOAL_SET_GET_256_CHAR (WOAL_IOCTL + 9)
/** Private command to read/write passphrase */
#define WOAL_PASSPHRASE 1
#define WOAL_ASSOCIATE 3
/** Private command ID to get WMM queue status */
#define WOAL_WMM_QUEUE_STATUS 4
/** Private command ID to get Traffic stream status */
#define WOAL_WMM_TS_STATUS 5
#define WOAL_IP_ADDRESS 7
/** Private command ID to set/get TX bemaforming */
#define WOAL_TX_BF_CFG 8
/** Private command ID to get PTK/GTK */
#define WOAL_GET_KEY 9
/** Get log buffer size */
#define GETLOG_BUFSIZE 1500
/** Private command ID to set none/get twelve chars*/
#define WOAL_SETNONE_GETTWELVE_CHAR (WOAL_IOCTL + 11)
/** Private command ID for WPS session */
#define WOAL_WPS_SESSION 1
/** Private command ID to set none/get four int */
#define WOAL_SETNONE_GET_FOUR_INT (WOAL_IOCTL + 13)
/** Private command ID to get data rates */
#define WOAL_DATA_RATE 1
/** Private command ID to get E-Supplicant mode */
#define WOAL_ESUPP_MODE 2
/** Private command to get/set 64 ints */
#define WOAL_SET_GET_64_INT (WOAL_IOCTL + 15)
/** Private command ID to set/get ECL system clock */
#define WOAL_ECL_SYS_CLOCK 1
/** Private command ID for hostcmd */
#define WOAL_HOST_CMD (WOAL_IOCTL + 17)
/** Private command ID for arpfilter */
#define WOAL_ARP_FILTER (WOAL_IOCTL + 19)
/** Private command ID to set ints and get chars */
#define WOAL_SET_INTS_GET_CHARS (WOAL_IOCTL + 21)
/** Private command ID to read EEPROM data */
#define WOAL_READ_EEPROM 1
/** Private command ID to set/get 2K bytes */
#define WOAL_SET_GET_2K_BYTES (WOAL_IOCTL + 23)
#ifdef SDIO
/** Private command ID to read/write Command 53 */
#define WOAL_CMD_53RDWR 2
#endif
/** Private command ID for setuserscan */
#define WOAL_SET_USER_SCAN 3
/** Private command ID for getscantable */
#define WOAL_GET_SCAN_TABLE 4
/** Private command ID for setuserscanext: async without wait */
#define WOAL_SET_USER_SCAN_EXT 5
/** Private command ID to request ADDTS */
#define WOAL_WMM_ADDTS 7
/** Private command ID to request DELTS */
#define WOAL_WMM_DELTS 8
/** Private command ID to queue configuration */
#define WOAL_WMM_QUEUE_CONFIG 9
/** Private command ID to queue stats */
#define WOAL_WMM_QUEUE_STATS 10
/** Private command ID to Bypass auth packet */
#define WOAL_BYPASSED_PACKET 11
#ifdef UAP_WEXT
/** The following command IDs are for Froyo app */
/** Private command ID to start driver */
#define WOAL_FROYO_START (WOAL_IOCTL + 28)
/** Private command ID to reload FW */
#define WOAL_FROYO_WL_FW_RELOAD (WOAL_IOCTL + 29)
/** Private command ID to stop driver */
#define WOAL_FROYO_STOP (WOAL_IOCTL + 30)
#endif
/** moal_802_11_rates */
typedef struct _moal_802_11_rates {
/** Num of rates */
t_u8 num_of_rates;
/** Rates */
t_u8 rates[MLAN_SUPPORTED_RATES];
} moal_802_11_rates, *pmoal_802_11_rates;
#if defined(STA_WEXT) || defined(UAP_WEXT)
int woal_wext_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd);
#endif
#endif /* _WOAL_PRIV_H_ */