mwifiex/mwifiex_8997/mapp/mlanconfig/config/tx_ctrl.conf

59 lines
1.7 KiB
Text
Raw Normal View History

#protocol
Protocol=0x88dc
# configure data rate in unit of 0.5Mbps
# 0 - auto rate determined by firmware
# Any other data rate except these data rates will
# be overwritten by default data rate.
# datarate index, unit in 0.5Mbps
# Index | 20MHz | 10MHz
# 12 | 6Mbps | 3Mbps
# 18 | 9Mbps | 4.5Mbps
# 24 | 12Mbps | 6Mbps
# 36 | 18Mbps | 9Mbps
# 48 | 24Mbps | 12Mbps
# 72 | 36Mbps | 18Mbps
# 96 | 48Mbps | 24Mbps
# 108 | 54Mbps | 27.5Mbps
Datarate=12
# configure Channel for the packet
# 0 - the channel set during the enable would be used
Channel=0
# configure Bandwith (only for 11p)
# 0: auto bandwith setting by firmware
# bit4: 1 use bit[3:0] bandwith setting
# bit[3:0]:
# 0 - 5MHz
# 1 - 10MHz
# 2 - 20MHz
# 3 - 40MHz
# 4 - 80MHz
Bandwidth=0x00
# configure power settings
# bit[7] host tx power control flag
# 0x0: use fw setting for tx power
# 0x1: value specified in bit[6] and bit[5:0] are valid
# bit[6] sign of the power specified in bit[5:0]
# 0x0: power specified in bit[5:0] is postive (+)
# 0x1: power specified in bit[5:0] is negative (-)
# bit[5:0] power to be used for transmission (in dBm)
Power=0x00
# configure Priority of the packet
# 1,2 - BK
# 0,3 - BE
# 4,5 - VI
# 6,7 - VO
Priority=0
# configure tx retry time
Retry_limit=0
# Destination MAC Address
Addr=00:50:43:22:0f:b0
Data=0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x8,0x9,0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x8,0x9,0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x8,0x9,0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19