mwifiex/mxm_wifiex/wlan_src/mlan/mlan_uap_ioctl.c

2494 lines
77 KiB
C
Raw Normal View History

/** @file mlan_uap_ioctl.c
*
* @brief This file contains the handling of AP mode ioctls
*
*
* Copyright 2009-2023 NXP
*
* This software file (the File) is distributed by NXP
* under the terms of the GNU General Public License Version 2, June 1991
* (the License). You may use, redistribute and/or modify the File in
* accordance with the terms and conditions of the License, a copy of which
* is available by writing to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
* worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
*
* THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
* this warranty disclaimer.
*
*/
/********************************************************
Change log:
02/05/2009: initial version
********************************************************/
#include "mlan.h"
#include "mlan_util.h"
#include "mlan_fw.h"
#ifdef STA_SUPPORT
#include "mlan_join.h"
#endif
#include "mlan_main.h"
#include "mlan_uap.h"
#include "mlan_11n.h"
#include "mlan_fw.h"
#include "mlan_11h.h"
#include "mlan_11ac.h"
#include "mlan_11ax.h"
/********************************************************
Global Variables
********************************************************/
/********************************************************
Local Functions
********************************************************/
/**
* @brief Stop BSS
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status wlan_uap_bss_ioctl_stop(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
pmlan_private pmpriv = pmadapter->priv[pioctl_req->bss_index];
ENTER();
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_APCMD_BSS_STOP,
HostCmd_ACT_GEN_SET, 0, (t_void *)pioctl_req,
MNULL);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
static t_bool wlan_can_radar_det_skip(mlan_private *priv)
{
mlan_private *priv_list[MLAN_MAX_BSS_NUM];
mlan_private *pmpriv;
mlan_adapter *pmadapter = priv->adapter;
t_u8 pcount, i;
/* In MBSS environment, if one of the BSS is already beaconing and DRCS
* is off then 11n_radar detection is not required for subsequent BSSes
* since they will follow the primary bss.
*/
if (!priv->adapter->mc_policy &&
(GET_BSS_ROLE(priv) == MLAN_BSS_ROLE_UAP)) {
memset(pmadapter, priv_list, 0x00, sizeof(priv_list));
pcount = wlan_get_privs_by_cond(pmadapter, wlan_is_intf_active,
priv_list);
for (i = 0; i < pcount; i++) {
pmpriv = priv_list[i];
if (GET_BSS_ROLE(pmpriv) == MLAN_BSS_ROLE_UAP)
return MTRUE;
}
}
return MFALSE;
}
/**
* @brief Callback to finish BSS IOCTL START
* Not to be called directly to initiate bss_start
*
* @param priv A pointer to mlan_private structure (cast from t_void*)
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
* @sa wlan_uap_bss_ioctl_start
*/
static mlan_status wlan_uap_callback_bss_ioctl_start(t_void *priv)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
mlan_private *pmpriv = (mlan_private *)priv;
mlan_callbacks *pcb = (mlan_callbacks *)&pmpriv->adapter->callbacks;
wlan_uap_get_info_cb_t *puap_state_chan_cb = &pmpriv->uap_state_chan_cb;
t_u8 old_channel;
t_bool under_nop = MFALSE;
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
dfs_state_t dfs_state;
ENTER();
/* clear callback now that we're here */
puap_state_chan_cb->get_chan_callback = MNULL;
/*
* Check if the region and channel requires we check for radar.
*/
if ((puap_state_chan_cb->bandcfg.chanBand == BAND_5GHZ) &&
!wlan_can_radar_det_skip(pmpriv) &&
wlan_11h_radar_detect_required(pmpriv,
puap_state_chan_cb->channel)) {
/* If DFS repeater mode is on then before starting the uAP
* make sure that mlan0 is connected to some external AP
* for DFS channel operations.
*/
if (pmpriv->adapter->dfs_repeater) {
pmlan_private tmpriv = MNULL;
tmpriv = wlan_get_priv(pmpriv->adapter,
MLAN_BSS_ROLE_STA);
if (tmpriv && !tmpriv->media_connected) {
PRINTM(MERROR,
"BSS start is blocked when DFS-repeater\n"
"mode is on and STA is not connected\n");
pcb->moal_ioctl_complete(
pmpriv->adapter->pmoal_handle,
puap_state_chan_cb->pioctl_req_curr,
MLAN_STATUS_FAILURE);
goto done;
} else {
/* STA is connected.
* Skip DFS check for bss_start since its a
* repeater mode
*/
goto prep_bss_start;
}
}
dfs_state = wlan_get_chan_dfs_state(
pmpriv, BAND_A, puap_state_chan_cb->channel);
if (dfs_state == DFS_AVAILABLE)
goto prep_bss_start;
/* first check if channel is under NOP */
if (wlan_11h_is_channel_under_nop(
pmpriv->adapter, puap_state_chan_cb->channel)) {
/* recently we've seen radar on this channel */
ret = MLAN_STATUS_FAILURE;
under_nop = MTRUE;
}
/* Check cached radar check on the channel */
if (ret == MLAN_STATUS_SUCCESS)
ret = wlan_11h_check_chan_report(
pmpriv, puap_state_chan_cb->channel);
/* Found radar: try to switch to a non-dfs channel */
if (ret != MLAN_STATUS_SUCCESS) {
old_channel = puap_state_chan_cb->channel;
ret = wlan_11h_switch_non_dfs_chan(
pmpriv, &puap_state_chan_cb->channel);
if (ret == MLAN_STATUS_SUCCESS) {
wlan_11h_update_bandcfg(
pmpriv,
&pmpriv->uap_state_chan_cb.bandcfg,
puap_state_chan_cb->channel);
PRINTM(MCMD_D,
"NOP: uap band config:0x%x channel=%d\n",
pmpriv->uap_state_chan_cb.bandcfg,
puap_state_chan_cb->channel);
ret = wlan_uap_set_channel(
pmpriv,
pmpriv->uap_state_chan_cb.bandcfg,
puap_state_chan_cb->channel);
if (ret == MLAN_STATUS_SUCCESS) {
if (under_nop) {
PRINTM(MMSG,
"Channel %d under NOP,"
" switched to new channel %d successfully.\n",
old_channel,
puap_state_chan_cb
->channel);
} else {
PRINTM(MMSG,
"Radar found on channel %d,"
" switched to new channel %d successfully.\n",
old_channel,
puap_state_chan_cb
->channel);
}
} else {
if (under_nop) {
PRINTM(MMSG,
"Channel %d under NOP,"
" switch to new channel %d failed.\n",
old_channel,
puap_state_chan_cb
->channel);
} else {
PRINTM(MMSG,
"Radar found on channel %d,"
" switch to new channel %d failed.\n",
old_channel,
puap_state_chan_cb
->channel);
}
pcb->moal_ioctl_complete(
pmpriv->adapter->pmoal_handle,
puap_state_chan_cb
->pioctl_req_curr,
MLAN_STATUS_FAILURE);
goto done;
}
} else {
if (under_nop) {
PRINTM(MMSG,
"Channel %d under NOP, no switch channel available.\n",
old_channel);
} else {
PRINTM(MMSG,
"Radar found on channel %d, no switch channel available.\n",
old_channel);
}
/* No command sent with the ioctl, need manually
* signal completion */
pcb->moal_ioctl_complete(
pmpriv->adapter->pmoal_handle,
puap_state_chan_cb->pioctl_req_curr,
MLAN_STATUS_FAILURE);
goto done;
}
} else {
PRINTM(MINFO, "No Radar found on channel %d\n",
puap_state_chan_cb->channel);
}
}
prep_bss_start:
/* else okay to send command: not DFS channel or no radar */
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_APCMD_BSS_START,
HostCmd_ACT_GEN_SET, 0,
(t_void *)puap_state_chan_cb->pioctl_req_curr,
MNULL);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
done:
puap_state_chan_cb->pioctl_req_curr = MNULL; /* prevent re-use */
LEAVE();
return ret;
}
/**
* @brief Start BSS
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
/**
* @sa wlan_uap_callback_bss_ioctl_start
*/
static mlan_status wlan_uap_bss_ioctl_start(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
pmlan_private pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_ds_bss *bss = MNULL;
ENTER();
bss = (mlan_ds_bss *)pioctl_req->pbuf;
pmpriv->uap_host_based = bss->param.host_based;
if (!pmpriv->intf_state_11h.is_11h_host &&
pmpriv->intf_state_11h.is_11h_active) {
/* if FW supports ACS+DFS then sequence is different */
/* First check channel report, defer BSS_START CMD to callback.
*/
/* store params, issue command to get UAP channel, whose
* CMD_RESP will callback remainder of bss_start handling */
pmpriv->uap_state_chan_cb.pioctl_req_curr = pioctl_req;
pmpriv->uap_state_chan_cb.get_chan_callback =
wlan_uap_callback_bss_ioctl_start;
pmpriv->intf_state_11h.is_11h_host = MFALSE;
ret = wlan_uap_get_channel(pmpriv);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
} else {
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_APCMD_BSS_START,
HostCmd_ACT_GEN_SET, 0,
(t_void *)pioctl_req, MNULL);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
}
LEAVE();
return ret;
}
/**
* @brief reset BSS
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status wlan_uap_bss_ioctl_reset(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
pmlan_private pmpriv = pmadapter->priv[pioctl_req->bss_index];
t_u8 i = 0;
ENTER();
/*
* Reset any uap private parameters here
*/
for (i = 0; i < pmadapter->max_mgmt_ie_index; i++)
memset(pmadapter, &pmpriv->mgmt_ie[i], 0, sizeof(custom_ie));
pmpriv->add_ba_param.timeout = MLAN_DEFAULT_BLOCK_ACK_TIMEOUT;
pmpriv->add_ba_param.tx_win_size = MLAN_UAP_AMPDU_DEF_TXWINSIZE;
pmpriv->add_ba_param.rx_win_size = MLAN_UAP_AMPDU_DEF_RXWINSIZE;
pmpriv->user_rxwinsize = pmpriv->add_ba_param.rx_win_size;
for (i = 0; i < MAX_NUM_TID; i++) {
pmpriv->aggr_prio_tbl[i].ampdu_user = tos_to_tid_inv[i];
pmpriv->aggr_prio_tbl[i].amsdu = tos_to_tid_inv[i];
pmpriv->addba_reject[i] = ADDBA_RSP_STATUS_ACCEPT;
}
pmpriv->aggr_prio_tbl[6].amsdu = BA_STREAM_NOT_ALLOWED;
pmpriv->aggr_prio_tbl[7].amsdu = BA_STREAM_NOT_ALLOWED;
pmpriv->aggr_prio_tbl[6].ampdu_user =
pmpriv->aggr_prio_tbl[7].ampdu_user = BA_STREAM_NOT_ALLOWED;
pmpriv->addba_reject[6] = pmpriv->addba_reject[7] =
ADDBA_RSP_STATUS_REJECT;
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_APCMD_SYS_RESET,
HostCmd_ACT_GEN_SET, 0, (t_void *)pioctl_req,
MNULL);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief This function to process add station.
*
* @param pmadapter A pointer to pmadapter.
*
* @param pioctl_req A pointer to pioctl_req
*
* @return MLAN_STATUS_SUCCESS/MLAN_STATUS_FAILURE
*/
static mlan_status wlan_uap_bss_ioctl_add_station(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_status ret = MLAN_STATUS_SUCCESS;
ENTER();
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_ADD_NEW_STATION,
HostCmd_ACT_ADD_STA, 0, (t_void *)pioctl_req,
MNULL);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief Set/Get MAC address
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status wlan_uap_bss_ioctl_mac_address(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_ds_bss *bss = MNULL;
mlan_status ret = MLAN_STATUS_SUCCESS;
t_u16 cmd_action = 0;
ENTER();
bss = (mlan_ds_bss *)pioctl_req->pbuf;
if (pioctl_req->action == MLAN_ACT_SET) {
memcpy_ext(pmadapter, pmpriv->curr_addr, &bss->param.mac_addr,
MLAN_MAC_ADDR_LENGTH, MLAN_MAC_ADDR_LENGTH);
cmd_action = HostCmd_ACT_GEN_SET;
} else
cmd_action = HostCmd_ACT_GEN_GET;
/* Send request to firmware */
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_APCMD_SYS_CONFIGURE,
cmd_action, 0, (t_void *)pioctl_req, MNULL);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief Set/Get wmm param
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status wlan_uap_bss_ioctl_uap_wmm_param(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_status ret = MLAN_STATUS_SUCCESS;
t_u16 cmd_action = 0;
ENTER();
if (pioctl_req->action == MLAN_ACT_SET)
cmd_action = HostCmd_ACT_GEN_SET;
else
cmd_action = HostCmd_ACT_GEN_GET;
/* Send request to firmware */
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_APCMD_SYS_CONFIGURE,
cmd_action, 0, (t_void *)pioctl_req, MNULL);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief Handle channel switch
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status
wlan_uap_bss_ioctl_action_chan_switch(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_status ret = MLAN_STATUS_SUCCESS;
t_u16 cmd_action = 0;
ENTER();
cmd_action = HostCmd_ACT_GEN_SET;
/* Send request to firmware */
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_APCMD_SYS_CONFIGURE,
cmd_action, 0, (t_void *)pioctl_req, MNULL);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief Set/Get scan channels
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status
wlan_uap_bss_ioctl_uap_scan_channels(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_status ret = MLAN_STATUS_SUCCESS;
t_u16 cmd_action = 0;
ENTER();
if (pioctl_req->action == MLAN_ACT_SET)
cmd_action = HostCmd_ACT_GEN_SET;
else
cmd_action = HostCmd_ACT_GEN_GET;
/* Send request to firmware */
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_APCMD_SYS_CONFIGURE,
cmd_action, 0, (t_void *)pioctl_req, MNULL);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief Set/Get UAP channel
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status wlan_uap_bss_ioctl_uap_channel(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_status ret = MLAN_STATUS_SUCCESS;
t_u16 cmd_action = 0;
ENTER();
if (pioctl_req->action == MLAN_ACT_SET)
cmd_action = HostCmd_ACT_GEN_SET;
else
cmd_action = HostCmd_ACT_GEN_GET;
/* Send request to firmware */
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_APCMD_SYS_CONFIGURE,
cmd_action, 0, (t_void *)pioctl_req, MNULL);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief Set/Get UAP operation control vaule
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status wlan_uap_bss_ioctl_uap_oper_ctrl(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_status ret = MLAN_STATUS_SUCCESS;
t_u16 cmd_action = 0;
ENTER();
if (pmadapter->fw_ver == HOST_API_VERSION_V15 &&
pmadapter->fw_min_ver >= FW_MINOR_VERSION_1) {
if (pioctl_req->action == MLAN_ACT_SET)
cmd_action = HostCmd_ACT_GEN_SET;
else
cmd_action = HostCmd_ACT_GEN_GET;
/* Send request to firmware */
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_APCMD_OPER_CTRL,
cmd_action, 0, (t_void *)pioctl_req,
(t_void *)pioctl_req->pbuf);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
} else {
PRINTM(MMSG, "FW don't support uap oper ctrl\n");
}
LEAVE();
return ret;
}
/**
* @brief Get Uap statistics
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status wlan_uap_get_stats(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
pmlan_private pmpriv = pmadapter->priv[pioctl_req->bss_index];
ENTER();
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_802_11_SNMP_MIB,
HostCmd_ACT_GEN_GET, 0, (t_void *)pioctl_req,
MNULL);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief Get Uap MIB counters
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status wlan_uap_get_stats_log(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
pmlan_private pmpriv = MNULL;
mlan_status ret = MLAN_STATUS_SUCCESS;
ENTER();
if (pioctl_req != MNULL) {
pmpriv = pmadapter->priv[pioctl_req->bss_index];
} else {
PRINTM(MERROR, "MLAN IOCTL information is not present\n");
ret = MLAN_STATUS_FAILURE;
goto exit;
}
/* Check information buffer length of MLAN IOCTL */
if (pioctl_req->buf_len < sizeof(mlan_ds_get_stats)) {
PRINTM(MWARN,
"MLAN IOCTL information buffer length is too short.\n");
pioctl_req->data_read_written = 0;
pioctl_req->buf_len_needed = sizeof(mlan_ds_get_stats);
pioctl_req->status_code = MLAN_ERROR_INVALID_PARAMETER;
ret = MLAN_STATUS_RESOURCE;
goto exit;
}
/* Send request to firmware */
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_802_11_GET_LOG,
HostCmd_ACT_GEN_GET, 0, (t_void *)pioctl_req,
MNULL);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
exit:
LEAVE();
return ret;
}
/**
* @brief Set/Get AP config
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status wlan_uap_bss_ioctl_config(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_status ret = MLAN_STATUS_SUCCESS;
t_u16 cmd_action = 0;
ENTER();
if (pioctl_req->action == MLAN_ACT_SET)
cmd_action = HostCmd_ACT_GEN_SET;
else
cmd_action = HostCmd_ACT_GEN_GET;
/* Send request to firmware */
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_APCMD_SYS_CONFIGURE,
cmd_action, 0, (t_void *)pioctl_req, MNULL);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief deauth sta
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status wlan_uap_bss_ioctl_deauth_sta(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
pmlan_private pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_ds_bss *bss = MNULL;
ENTER();
bss = (mlan_ds_bss *)pioctl_req->pbuf;
/*
* Clean up station's ralist, to stop and flush pending traffic
* before uAP sending deauth command to FW.
*/
wlan_wmm_delete_peer_ralist(pmpriv, bss->param.deauth_param.mac_addr);
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_APCMD_STA_DEAUTH,
HostCmd_ACT_GEN_SET, 0, (t_void *)pioctl_req,
(t_void *)&bss->param.deauth_param);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief Get station list
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status wlan_uap_get_sta_list(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
pmlan_private pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_status ret = MLAN_STATUS_SUCCESS;
ENTER();
/* Send request to firmware */
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_APCMD_STA_LIST,
HostCmd_ACT_GEN_GET, 0, (t_void *)pioctl_req,
MNULL);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief soft_reset
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status wlan_uap_misc_ioctl_soft_reset(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_status ret = MLAN_STATUS_SUCCESS;
ENTER();
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_SOFT_RESET,
HostCmd_ACT_GEN_SET, 0, (t_void *)pioctl_req,
MNULL);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief Tx data pause
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status wlan_uap_misc_ioctl_txdatapause(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_ds_misc_cfg *pmisc = (mlan_ds_misc_cfg *)pioctl_req->pbuf;
mlan_status ret = MLAN_STATUS_SUCCESS;
t_u16 cmd_action = 0;
ENTER();
if (pioctl_req->action == MLAN_ACT_SET)
cmd_action = HostCmd_ACT_GEN_SET;
else
cmd_action = HostCmd_ACT_GEN_GET;
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_CFG_TX_DATA_PAUSE,
cmd_action, 0, (t_void *)pioctl_req,
&(pmisc->param.tx_datapause));
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief Set/Get Power mode
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status wlan_uap_pm_ioctl_mode(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_ds_pm_cfg *pm = MNULL;
mlan_status ret = MLAN_STATUS_SUCCESS;
t_u16 cmd_action = 0;
t_u32 cmd_oid = 0;
ENTER();
pm = (mlan_ds_pm_cfg *)pioctl_req->pbuf;
if (pioctl_req->action == MLAN_ACT_SET) {
if (pm->param.ps_mgmt.ps_mode == PS_MODE_INACTIVITY) {
cmd_action = EN_AUTO_PS;
cmd_oid = BITMAP_UAP_INACT_PS;
} else if (pm->param.ps_mgmt.ps_mode == PS_MODE_PERIODIC_DTIM) {
cmd_action = EN_AUTO_PS;
cmd_oid = BITMAP_UAP_DTIM_PS;
} else {
cmd_action = DIS_AUTO_PS;
cmd_oid = BITMAP_UAP_INACT_PS | BITMAP_UAP_DTIM_PS;
}
} else {
cmd_action = GET_PS;
cmd_oid = BITMAP_UAP_INACT_PS | BITMAP_UAP_DTIM_PS;
}
/* Send request to firmware */
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_802_11_PS_MODE_ENH,
cmd_action, cmd_oid, (t_void *)pioctl_req,
(t_void *)&pm->param.ps_mgmt);
if ((ret == MLAN_STATUS_SUCCESS) &&
(pioctl_req->action == MLAN_ACT_SET) &&
(cmd_action == DIS_AUTO_PS)) {
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_802_11_PS_MODE_ENH,
GET_PS, 0, MNULL, MNULL);
}
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief Set WAPI IE
*
* @param priv A pointer to mlan_private structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status wlan_uap_set_wapi_ie(mlan_private *priv,
pmlan_ioctl_req pioctl_req)
{
mlan_ds_misc_cfg *misc = MNULL;
mlan_status ret = MLAN_STATUS_SUCCESS;
ENTER();
misc = (mlan_ds_misc_cfg *)pioctl_req->pbuf;
if (misc->param.gen_ie.len) {
if (misc->param.gen_ie.len > sizeof(priv->wapi_ie)) {
PRINTM(MWARN, "failed to copy WAPI IE, too big\n");
pioctl_req->status_code = MLAN_ERROR_INVALID_PARAMETER;
LEAVE();
return MLAN_STATUS_FAILURE;
}
memcpy_ext(priv->adapter, priv->wapi_ie,
misc->param.gen_ie.ie_data, misc->param.gen_ie.len,
sizeof(priv->wapi_ie));
priv->wapi_ie_len = misc->param.gen_ie.len;
PRINTM(MIOCTL, "Set wapi_ie_len=%d IE=%#x\n", priv->wapi_ie_len,
priv->wapi_ie[0]);
DBG_HEXDUMP(MCMD_D, "wapi_ie", priv->wapi_ie,
priv->wapi_ie_len);
if (priv->wapi_ie[0] == WAPI_IE)
priv->sec_info.wapi_enabled = MTRUE;
} else {
memset(priv->adapter, priv->wapi_ie, 0, sizeof(priv->wapi_ie));
priv->wapi_ie_len = misc->param.gen_ie.len;
PRINTM(MINFO, "Reset wapi_ie_len=%d IE=%#x\n",
priv->wapi_ie_len, priv->wapi_ie[0]);
priv->sec_info.wapi_enabled = MFALSE;
}
/* Send request to firmware */
ret = wlan_prepare_cmd(priv, HostCmd_CMD_APCMD_SYS_CONFIGURE,
HostCmd_ACT_GEN_SET, 0, (t_void *)pioctl_req,
MNULL);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief Set generic IE
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_SUCCESS/MLAN_STATUS_PENDING --success,
* otherwise fail
*/
static mlan_status wlan_uap_misc_ioctl_gen_ie(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_ds_misc_cfg *misc = MNULL;
IEEEtypes_VendorHeader_t *pvendor_ie = MNULL;
ENTER();
misc = (mlan_ds_misc_cfg *)pioctl_req->pbuf;
if ((misc->param.gen_ie.type == MLAN_IE_TYPE_GEN_IE) &&
(pioctl_req->action == MLAN_ACT_SET)) {
if (misc->param.gen_ie.len) {
pvendor_ie = (IEEEtypes_VendorHeader_t *)
misc->param.gen_ie.ie_data;
if (pvendor_ie->element_id == WAPI_IE) {
/* IE is a WAPI IE so call set_wapi function */
ret = wlan_uap_set_wapi_ie(pmpriv, pioctl_req);
}
} else {
/* clear WAPI IE */
ret = wlan_uap_set_wapi_ie(pmpriv, pioctl_req);
}
}
LEAVE();
return ret;
}
/**
* @brief Set/Get WAPI status
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_SUCCESS --success
*/
static mlan_status wlan_uap_sec_ioctl_wapi_enable(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_ds_sec_cfg *sec = MNULL;
ENTER();
sec = (mlan_ds_sec_cfg *)pioctl_req->pbuf;
if (pioctl_req->action == MLAN_ACT_GET) {
if (pmpriv->wapi_ie_len)
sec->param.wapi_enabled = MTRUE;
else
sec->param.wapi_enabled = MFALSE;
} else {
if (sec->param.wapi_enabled == MFALSE) {
memset(pmpriv->adapter, pmpriv->wapi_ie, 0,
sizeof(pmpriv->wapi_ie));
pmpriv->wapi_ie_len = 0;
PRINTM(MINFO, "Reset wapi_ie_len=%d IE=%#x\n",
pmpriv->wapi_ie_len, pmpriv->wapi_ie[0]);
pmpriv->sec_info.wapi_enabled = MFALSE;
}
}
pioctl_req->data_read_written = sizeof(t_u32) + MLAN_SUB_COMMAND_SIZE;
LEAVE();
return ret;
}
/**
* @brief report mic error
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status
wlan_uap_sec_ioctl_report_mic_error(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
pmlan_private pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_ds_sec_cfg *sec = MNULL;
ENTER();
sec = (mlan_ds_sec_cfg *)pioctl_req->pbuf;
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_APCMD_REPORT_MIC,
HostCmd_ACT_GEN_SET, 0, (t_void *)pioctl_req,
(t_void *)sec->param.sta_mac);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief Set encrypt key
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_SUCCESS/MLAN_STATUS_PENDING --success,
* otherwise fail
*/
static mlan_status
wlan_uap_sec_ioctl_set_encrypt_key(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_ds_sec_cfg *sec = MNULL;
ENTER();
sec = (mlan_ds_sec_cfg *)pioctl_req->pbuf;
if ((pioctl_req->action != MLAN_ACT_SET) &&
(pioctl_req->action != MLAN_ACT_PASN_KEY_DNLD)) {
pioctl_req->status_code = MLAN_ERROR_IOCTL_INVALID;
LEAVE();
return MLAN_STATUS_FAILURE;
}
if (!sec->param.encrypt_key.key_remove &&
!sec->param.encrypt_key.key_len) {
PRINTM(MCMND, "Skip set key with key_len = 0\n");
LEAVE();
return ret;
}
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_802_11_KEY_MATERIAL,
pioctl_req->action, KEY_INFO_ENABLED,
(t_void *)pioctl_req, &sec->param.encrypt_key);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief Get BSS information
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_SUCCESS --success
*/
static mlan_status wlan_uap_get_bss_info(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
pmlan_private pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_status ret = MLAN_STATUS_SUCCESS;
mlan_ds_get_info *info;
ENTER();
info = (mlan_ds_get_info *)pioctl_req->pbuf;
/* Connection status */
info->param.bss_info.media_connected = pmpriv->media_connected;
/* Radio status */
info->param.bss_info.radio_on = pmadapter->radio_on;
/* BSSID */
memcpy_ext(pmadapter, &info->param.bss_info.bssid, pmpriv->curr_addr,
MLAN_MAC_ADDR_LENGTH, MLAN_MAC_ADDR_LENGTH);
info->param.bss_info.scan_block = pmadapter->scan_block;
info->param.bss_info.is_hs_configured = pmadapter->is_hs_configured;
info->param.bss_info.is_11h_active =
pmpriv->intf_state_11h.is_11h_active;
info->param.bss_info.dfs_check_channel =
pmpriv->adapter->state_dfs.dfs_check_channel;
pioctl_req->data_read_written =
sizeof(mlan_bss_info) + MLAN_SUB_COMMAND_SIZE;
LEAVE();
return ret;
}
/**
* @brief Set Host Sleep configurations
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_SUCCES/MLAN_STATUS_PENDING --success,
* otherwise fail
*/
static mlan_status wlan_uap_pm_ioctl_deepsleep(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_ds_pm_cfg *pm = MNULL;
mlan_ds_auto_ds auto_ds;
t_u32 mode;
ENTER();
if (pioctl_req->buf_len < sizeof(mlan_ds_pm_cfg)) {
PRINTM(MWARN, "MLAN bss IOCTL length is too short.\n");
pioctl_req->data_read_written = 0;
pioctl_req->buf_len_needed = sizeof(mlan_ds_pm_cfg);
pioctl_req->status_code = MLAN_ERROR_INVALID_PARAMETER;
LEAVE();
return MLAN_STATUS_RESOURCE;
}
pm = (mlan_ds_pm_cfg *)pioctl_req->pbuf;
if (pioctl_req->action == MLAN_ACT_GET) {
if (pmadapter->is_deep_sleep) {
pm->param.auto_deep_sleep.auto_ds = DEEP_SLEEP_ON;
pm->param.auto_deep_sleep.idletime =
pmadapter->idle_time;
} else
pm->param.auto_deep_sleep.auto_ds = DEEP_SLEEP_OFF;
} else {
if (pmadapter->is_deep_sleep &&
pm->param.auto_deep_sleep.auto_ds == DEEP_SLEEP_ON) {
PRINTM(MMSG, "uAP already in deep sleep mode\n");
LEAVE();
return MLAN_STATUS_FAILURE;
}
if (((mlan_ds_pm_cfg *)pioctl_req->pbuf)
->param.auto_deep_sleep.auto_ds == DEEP_SLEEP_ON) {
auto_ds.auto_ds = DEEP_SLEEP_ON;
mode = EN_AUTO_PS;
PRINTM(MINFO, "Auto Deep Sleep: on\n");
} else {
mode = DIS_AUTO_PS;
auto_ds.auto_ds = DEEP_SLEEP_OFF;
PRINTM(MINFO, "Auto Deep Sleep: off\n");
}
if (((mlan_ds_pm_cfg *)pioctl_req->pbuf)
->param.auto_deep_sleep.idletime)
auto_ds.idletime =
((mlan_ds_pm_cfg *)pioctl_req->pbuf)
->param.auto_deep_sleep.idletime;
else
auto_ds.idletime = pmadapter->idle_time;
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_802_11_PS_MODE_ENH,
(t_u16)mode, BITMAP_AUTO_DS,
(t_void *)pioctl_req, &auto_ds);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
}
LEAVE();
return ret;
}
/**
* @brief Set Band Steering configurations
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_SUCCES/MLAN_STATUS_PENDING --success,
* otherwise fail
*/
static mlan_status wlan_misc_band_steering_cfg(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_ds_misc_cfg *pm = MNULL;
ENTER();
if (pioctl_req->buf_len < sizeof(mlan_ds_band_steer_cfg)) {
PRINTM(MWARN, "MLAN bss IOCTL length is too short.\n");
pioctl_req->data_read_written = 0;
pioctl_req->buf_len_needed = sizeof(mlan_ds_band_steer_cfg);
pioctl_req->status_code = MLAN_ERROR_INVALID_PARAMETER;
LEAVE();
return MLAN_STATUS_RESOURCE;
}
pm = (mlan_ds_misc_cfg *)pioctl_req->pbuf;
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_802_11_BAND_STEERING,
(t_u16)pm->param.band_steer_cfg.action, 0,
(t_void *)pioctl_req,
(t_void *)&pm->param.band_steer_cfg);
LEAVE();
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
return ret;
}
/**
* @brief Set Beacon Stuck Detect Mechanism Configurations
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_SUCCES/MLAN_STATUS_PENDING --success,
* otherwise fail
*/
static mlan_status wlan_misc_beacon_stuck_cfg(IN pmlan_adapter pmadapter,
IN pmlan_ioctl_req pioctl_req)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_ds_misc_cfg *pm = MNULL;
ENTER();
if (pioctl_req->buf_len < sizeof(mlan_ds_beacon_stuck_param_cfg)) {
PRINTM(MWARN, "MLAN bss IOCTL length is too short.\n");
pioctl_req->data_read_written = 0;
pioctl_req->buf_len_needed =
sizeof(mlan_ds_beacon_stuck_param_cfg);
pioctl_req->status_code = MLAN_ERROR_INVALID_PARAMETER;
LEAVE();
return MLAN_STATUS_RESOURCE;
}
pm = (mlan_ds_misc_cfg *)pioctl_req->pbuf;
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_UAP_BEACON_STUCK_CFG,
(t_u16)pm->param.beacon_stuck_cfg.action, 0,
(t_void *)pioctl_req,
(t_void *)&pm->param.beacon_stuck_cfg);
LEAVE();
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
return ret;
}
/**
* @brief Set SNMP MIB for 11D
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status wlan_uap_snmp_mib_11d(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_ds_snmp_mib *snmp = MNULL;
state_11d_t flag;
ENTER();
if (pioctl_req->buf_len < sizeof(mlan_ds_snmp_mib)) {
PRINTM(MWARN, "MLAN snmp_mib IOCTL length is too short.\n");
pioctl_req->data_read_written = 0;
pioctl_req->buf_len_needed = sizeof(mlan_ds_snmp_mib);
LEAVE();
return MLAN_STATUS_RESOURCE;
}
if ((pioctl_req->action == MLAN_ACT_SET) && pmpriv->uap_bss_started) {
PRINTM(MIOCTL,
"11D setting cannot be changed while UAP bss is started.\n");
pioctl_req->data_read_written = 0;
LEAVE();
return MLAN_STATUS_FAILURE;
}
snmp = (mlan_ds_snmp_mib *)pioctl_req->pbuf;
flag = (snmp->param.oid_value) ? ENABLE_11D : DISABLE_11D;
ret = wlan_11d_enable(pmpriv, (t_void *)pioctl_req, flag);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief Callback to finish domain_info handling
* Not to be called directly to initiate domain_info setting.
*
* @param pmpriv A pointer to mlan_private structure (cast from t_void*)
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
* @sa wlan_uap_domain_info
*/
static mlan_status wlan_uap_callback_domain_info(t_void *priv)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
mlan_private *pmpriv = (mlan_private *)priv;
wlan_uap_get_info_cb_t *puap_state_chan_cb = &pmpriv->uap_state_chan_cb;
mlan_ds_11d_cfg *cfg11d;
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
t_u16 band;
pmlan_adapter pmadapter = pmpriv->adapter;
pmlan_callbacks pcb = &pmadapter->callbacks;
ENTER();
/* clear callback now that we're here */
puap_state_chan_cb->get_chan_callback = MNULL;
if (!puap_state_chan_cb->pioctl_req_curr) {
PRINTM(MERROR, "pioctl_req_curr is null\n");
LEAVE();
return ret;
}
cfg11d = (mlan_ds_11d_cfg *)puap_state_chan_cb->pioctl_req_curr->pbuf;
band = (puap_state_chan_cb->bandcfg.chanBand == BAND_5GHZ) ? BAND_A :
BAND_B;
ret = wlan_11d_handle_uap_domain_info(
pmpriv, band, cfg11d->param.domain_tlv,
puap_state_chan_cb->pioctl_req_curr);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
else {
puap_state_chan_cb->pioctl_req_curr->status_code =
MLAN_STATUS_FAILURE;
pcb->moal_ioctl_complete(pmadapter->pmoal_handle,
puap_state_chan_cb->pioctl_req_curr,
MLAN_STATUS_FAILURE);
}
puap_state_chan_cb->pioctl_req_curr = MNULL; /* prevent re-use */
LEAVE();
return ret;
}
/**
* @brief Set Domain Info for 11D
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
* @sa wlan_uap_callback_domain_info
*/
static mlan_status wlan_uap_domain_info(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
ENTER();
if (pioctl_req->buf_len < sizeof(mlan_ds_11d_cfg)) {
PRINTM(MWARN, "MLAN 11d_cfg IOCTL length is too short.\n");
pioctl_req->data_read_written = 0;
pioctl_req->buf_len_needed = sizeof(mlan_ds_11d_cfg);
LEAVE();
return MLAN_STATUS_RESOURCE;
}
if ((pioctl_req->action == MLAN_ACT_SET) && pmpriv->uap_bss_started) {
PRINTM(MIOCTL,
"Domain_info cannot be changed while UAP bss is started.\n");
pioctl_req->data_read_written = 0;
LEAVE();
return MLAN_STATUS_FAILURE;
}
/* store params, issue command to get UAP channel, whose CMD_RESP will
* callback remainder of domain_info handling */
pmpriv->uap_state_chan_cb.pioctl_req_curr = pioctl_req;
pmpriv->uap_state_chan_cb.get_chan_callback =
wlan_uap_callback_domain_info;
ret = wlan_uap_get_channel(pmpriv);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief Callback to finish 11H channel check handling.
* Not to be called directly to initiate channel check.
*
* @param priv A pointer to mlan_private structure (cast from t_void*)
*
* @return MLAN_STATUS_SUCCESS/PENDING --success, otherwise fail
* @sa wlan_uap_11h_channel_check_req
*/
static mlan_status wlan_uap_callback_11h_channel_check_req(t_void *priv)
{
mlan_status ret = MLAN_STATUS_FAILURE;
mlan_private *pmpriv = (mlan_private *)priv;
mlan_callbacks *pcb = (mlan_callbacks *)&pmpriv->adapter->callbacks;
wlan_uap_get_info_cb_t *puap_state_chan_cb = &pmpriv->uap_state_chan_cb;
Band_Config_t *pband_cfg = &puap_state_chan_cb->bandcfg;
/* keep copy as local variable */
pmlan_ioctl_req pioctl = puap_state_chan_cb->pioctl_req_curr;
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
dfs_state_t dfs_state;
ENTER();
/* clear callback now that we're here */
puap_state_chan_cb->get_chan_callback = MNULL;
/* clear early to avoid race condition */
puap_state_chan_cb->pioctl_req_curr = MNULL;
/*
* Check if the region and channel requires a channel availability
* check.
*/
if ((puap_state_chan_cb->bandcfg.chanBand == BAND_5GHZ) &&
!wlan_can_radar_det_skip(pmpriv) &&
wlan_11h_radar_detect_required(pmpriv,
puap_state_chan_cb->channel) &&
!wlan_11h_is_channel_under_nop(pmpriv->adapter,
puap_state_chan_cb->channel)) {
/*
* Radar detection is required for this channel, make sure
* 11h is activated in the firmware
*/
ret = wlan_11h_activate(pmpriv, MNULL, MTRUE);
ret = wlan_11h_config_master_radar_det(pmpriv, MTRUE);
ret = wlan_11h_check_update_radar_det_state(pmpriv);
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
dfs_state = wlan_get_chan_dfs_state(
pmpriv, BAND_A, puap_state_chan_cb->channel);
if (dfs_state == DFS_AVAILABLE) {
wlan_11h_set_dfs_check_chan(pmpriv,
puap_state_chan_cb->channel,
pband_cfg->chanWidth);
PRINTM(MCMND, "DFS: Channel %d is Avaliable\n",
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
puap_state_chan_cb->channel);
pcb->moal_ioctl_complete(pmpriv->adapter->pmoal_handle,
pioctl, MLAN_STATUS_COMPLETE);
LEAVE();
return ret;
}
/* Check for radar on the channel */
ret = wlan_11h_issue_radar_detect(pmpriv, pioctl,
puap_state_chan_cb->channel,
*pband_cfg);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
} else {
/* No command sent with the ioctl, need manually signal
* completion */
pcb->moal_ioctl_complete(pmpriv->adapter->pmoal_handle, pioctl,
MLAN_STATUS_COMPLETE);
}
LEAVE();
return ret;
}
/**
* @brief 802.11h uap start channel check
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
* @sa wlan_uap_callback_11h_channel_check_req
*/
static mlan_status wlan_uap_11h_channel_check_req(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_ds_11h_cfg *p11h_cfg;
ENTER();
if (pioctl_req->buf_len < sizeof(mlan_ds_11h_cfg)) {
PRINTM(MWARN, "MLAN 11h_cfg IOCTL length is too short.\n");
pioctl_req->data_read_written = 0;
pioctl_req->buf_len_needed = sizeof(mlan_ds_11h_cfg);
LEAVE();
return MLAN_STATUS_RESOURCE;
}
p11h_cfg = (mlan_ds_11h_cfg *)pioctl_req->pbuf;
pmpriv->intf_state_11h.is_11h_host =
p11h_cfg->param.chan_rpt_req.host_based;
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
if (!pmpriv->intf_state_11h.is_11h_host &&
pmpriv->bss_type != MLAN_BSS_TYPE_DFS) {
/* store params, issue command to get UAP channel, whose
* CMD_RESP will callback remainder of 11H channel check
* handling */
pmpriv->uap_state_chan_cb.pioctl_req_curr = pioctl_req;
pmpriv->uap_state_chan_cb.get_chan_callback =
wlan_uap_callback_11h_channel_check_req;
ret = wlan_uap_get_channel(pmpriv);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
} else {
if (!wlan_11h_is_active(pmpriv)) {
/* active 11h extention in Fw */
ret = wlan_11h_activate(pmpriv, MNULL, MTRUE);
ret = wlan_11h_config_master_radar_det(pmpriv, MTRUE);
ret = wlan_11h_check_update_radar_det_state(pmpriv);
}
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
if (p11h_cfg->param.chan_rpt_req.millisec_dwell_time ||
pmpriv->bss_type == MLAN_BSS_TYPE_DFS) {
if (pmpriv->adapter->dfs_test_params
.user_cac_period_msec) {
PRINTM(MCMD_D,
"cfg80211 dfs_testing - user CAC period=%d (msec)\n",
pmpriv->adapter->dfs_test_params
.user_cac_period_msec);
p11h_cfg->param.chan_rpt_req
.millisec_dwell_time =
pmpriv->adapter->dfs_test_params
.user_cac_period_msec;
}
if (pmpriv->adapter->dfs_test_params.cac_restart &&
p11h_cfg->param.chan_rpt_req.millisec_dwell_time) {
pmpriv->adapter->dfs_test_params.chan =
p11h_cfg->param.chan_rpt_req.chanNum;
pmpriv->adapter->dfs_test_params
.millisec_dwell_time =
p11h_cfg->param.chan_rpt_req
.millisec_dwell_time;
memcpy_ext(
pmpriv->adapter,
&pmpriv->adapter->dfs_test_params
.bandcfg,
&p11h_cfg->param.chan_rpt_req.bandcfg,
sizeof(Band_Config_t),
sizeof(Band_Config_t));
}
if (p11h_cfg->param.chan_rpt_req.millisec_dwell_time)
PRINTM(MMSG,
"11h: issuing DFS Radar check for channel=%d."
" Please wait for response...\n",
p11h_cfg->param.chan_rpt_req.chanNum);
ret = wlan_prepare_cmd(
pmpriv, HostCmd_CMD_CHAN_REPORT_REQUEST,
HostCmd_ACT_GEN_SET, 0, (t_void *)pioctl_req,
(t_void *)&p11h_cfg->param.chan_rpt_req);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
}
}
LEAVE();
return ret;
}
/**
* @brief Callback to finish 11H handling
* Not to be called directly to initiate 11H setting.
*
* @param pmpriv A pointer to mlan_private structure (cast from t_void*)
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
* @sa wlan_uap_snmp_mib_11h
*/
static mlan_status wlan_uap_callback_snmp_mib_11h(t_void *priv)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
mlan_private *pmpriv = (mlan_private *)priv;
wlan_uap_get_info_cb_t *puap_state_chan_cb = &pmpriv->uap_state_chan_cb;
mlan_callbacks *pcb = (mlan_callbacks *)&pmpriv->adapter->callbacks;
mlan_ds_snmp_mib *snmp;
t_bool enable_11h;
ENTER();
/* clear callback now that we're here */
puap_state_chan_cb->get_chan_callback = MNULL;
snmp = (mlan_ds_snmp_mib *)puap_state_chan_cb->pioctl_req_curr->pbuf;
enable_11h = (snmp->param.oid_value) ? MTRUE : MFALSE;
if (enable_11h) {
if ((puap_state_chan_cb->bandcfg.chanBand == BAND_5GHZ) &&
!wlan_can_radar_det_skip(pmpriv) &&
wlan_11h_radar_detect_required(
pmpriv, puap_state_chan_cb->channel)) {
if (!wlan_11h_is_master_radar_det_active(pmpriv))
wlan_11h_config_master_radar_det(pmpriv, MTRUE);
} else {
puap_state_chan_cb->pioctl_req_curr->status_code =
MLAN_STATUS_SUCCESS;
pcb->moal_ioctl_complete(
pmpriv->adapter->pmoal_handle,
puap_state_chan_cb->pioctl_req_curr,
MLAN_STATUS_SUCCESS);
goto done;
}
}
ret = wlan_11h_activate(pmpriv,
(t_void *)puap_state_chan_cb->pioctl_req_curr,
enable_11h);
wlan_11h_check_update_radar_det_state(pmpriv);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
done:
puap_state_chan_cb->pioctl_req_curr = MNULL; /* prevent re-use */
LEAVE();
return ret;
}
/**
* @brief Set SNMP MIB for 11H
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
* @sa wlan_uap_callback_snmp_mib_11h
*/
static mlan_status wlan_uap_snmp_mib_11h(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_ds_snmp_mib *snmp = MNULL;
t_bool enable;
ENTER();
if (pioctl_req->buf_len < sizeof(mlan_ds_snmp_mib)) {
PRINTM(MWARN, "MLAN snmp_mib IOCTL length is too short.\n");
pioctl_req->data_read_written = 0;
pioctl_req->buf_len_needed = sizeof(mlan_ds_snmp_mib);
LEAVE();
return MLAN_STATUS_RESOURCE;
}
snmp = (mlan_ds_snmp_mib *)pioctl_req->pbuf;
enable = (snmp->param.oid_value) ? MTRUE : MFALSE;
if (enable) {
/* first enable 11D if it is not enabled */
if (!wlan_fw_11d_is_enabled(pmpriv)) {
ret = wlan_11d_enable(pmpriv, MNULL, ENABLE_11D);
if (ret != MLAN_STATUS_SUCCESS) {
PRINTM(MERROR,
"Failed to first enable 11D before enabling 11H.\n");
LEAVE();
return ret;
}
}
}
/* store params, issue command to get UAP channel, whose CMD_RESP will
* callback remainder of 11H handling (and radar detect if DFS chan) */
pmpriv->uap_state_chan_cb.pioctl_req_curr = pioctl_req;
pmpriv->uap_state_chan_cb.get_chan_callback =
wlan_uap_callback_snmp_mib_11h;
ret = wlan_uap_get_channel(pmpriv);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
/**
* @brief Set SNMP MIB for 11H
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
* @sa wlan_uap_callback_snmp_mib_11h
*/
static mlan_status wlan_uap_snmp_mib_11h_fakeradar(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_status ret = MLAN_STATUS_SUCCESS;
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
ENTER();
if (pioctl_req->buf_len < sizeof(mlan_ds_snmp_mib)) {
PRINTM(MWARN, "MLAN snmp_mib IOCTL length is too short.\n");
pioctl_req->data_read_written = 0;
pioctl_req->buf_len_needed = sizeof(mlan_ds_snmp_mib);
LEAVE();
return MLAN_STATUS_RESOURCE;
}
/* Send cmd to FW to trigger fakeradar in firmware */
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_802_11_SNMP_MIB,
HostCmd_ACT_GEN_SET, Dot11H_fakeRadar,
(t_void *)pioctl_req, MNULL);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief ACS scan
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status wlan_uap_bss_ioctl_acs_scan(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_status ret = MLAN_STATUS_SUCCESS;
ENTER();
if (pmadapter->uap_fw_ver < UAP_FW_VERSION_2) {
PRINTM(MIOCTL, "FW don't support ACS SCAN API\n");
return MLAN_STATUS_FAILURE;
}
/* Send request to firmware */
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_APCMD_ACS_SCAN,
HostCmd_ACT_GEN_SET, 0, (t_void *)pioctl_req,
MNULL);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/********************************************************
Global Functions
********************************************************/
/**
* @brief Issue CMD to UAP firmware to get current channel
*
* @param pmpriv A pointer to mlan_private structure
*
* @return MLAN_STATUS_SUCCESS --success, otherwise fail
*/
mlan_status wlan_uap_get_channel(pmlan_private pmpriv)
{
MrvlIEtypes_channel_band_t tlv_chan_band;
mlan_status ret = MLAN_STATUS_SUCCESS;
ENTER();
memset(pmpriv->adapter, &tlv_chan_band, 0, sizeof(tlv_chan_band));
tlv_chan_band.header.type = TLV_TYPE_UAP_CHAN_BAND_CONFIG;
tlv_chan_band.header.len = sizeof(MrvlIEtypes_channel_band_t) -
sizeof(MrvlIEtypesHeader_t);
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_APCMD_SYS_CONFIGURE,
HostCmd_ACT_GEN_GET, 0, MNULL, &tlv_chan_band);
LEAVE();
return ret;
}
/**
* @brief Issue CMD to UAP firmware to set current channel
*
* @param pmpriv A pointer to mlan_private structure
* @param uap_band_cfg UAP band configuration
* @param channel New channel
*
* @return MLAN_STATUS_SUCCESS --success, otherwise fail
*/
mlan_status wlan_uap_set_channel(pmlan_private pmpriv,
Band_Config_t uap_band_cfg, t_u8 channel)
{
MrvlIEtypes_channel_band_t tlv_chan_band;
mlan_status ret = MLAN_STATUS_SUCCESS;
ENTER();
memset(pmpriv->adapter, &tlv_chan_band, 0, sizeof(tlv_chan_band));
tlv_chan_band.header.type = TLV_TYPE_UAP_CHAN_BAND_CONFIG;
tlv_chan_band.header.len = sizeof(MrvlIEtypes_channel_band_t) -
sizeof(MrvlIEtypesHeader_t);
tlv_chan_band.bandcfg = uap_band_cfg;
tlv_chan_band.channel = channel;
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_APCMD_SYS_CONFIGURE,
HostCmd_ACT_GEN_SET, 0, MNULL, &tlv_chan_band);
LEAVE();
return ret;
}
/**
* @brief Issue CMD to UAP firmware to get current beacon and dtim periods
*
* @param pmpriv A pointer to mlan_private structure
*
* @return MLAN_STATUS_SUCCESS --success, otherwise fail
*/
mlan_status wlan_uap_get_beacon_dtim(pmlan_private pmpriv)
{
t_u8 tlv_buffer[sizeof(MrvlIEtypes_beacon_period_t) +
sizeof(MrvlIEtypes_dtim_period_t)];
MrvlIEtypes_beacon_period_t *ptlv_beacon_pd;
MrvlIEtypes_dtim_period_t *ptlv_dtim_pd;
mlan_status ret = MLAN_STATUS_SUCCESS;
ENTER();
memset(pmpriv->adapter, &tlv_buffer, 0, sizeof(tlv_buffer));
ptlv_beacon_pd = (MrvlIEtypes_beacon_period_t *)tlv_buffer;
ptlv_beacon_pd->header.type = TLV_TYPE_UAP_BEACON_PERIOD;
ptlv_beacon_pd->header.len = sizeof(MrvlIEtypes_beacon_period_t) -
sizeof(MrvlIEtypesHeader_t);
ptlv_dtim_pd =
(MrvlIEtypes_dtim_period_t
*)(tlv_buffer + sizeof(MrvlIEtypes_beacon_period_t));
ptlv_dtim_pd->header.type = TLV_TYPE_UAP_DTIM_PERIOD;
ptlv_dtim_pd->header.len =
sizeof(MrvlIEtypes_dtim_period_t) - sizeof(MrvlIEtypesHeader_t);
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_APCMD_SYS_CONFIGURE,
HostCmd_ACT_GEN_GET, 0, MNULL, tlv_buffer);
LEAVE();
return ret;
}
/**
* @brief Get/Start/Stop/Reset stats
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status wlan_misc_ioctl_stats(pmlan_adapter pmadapter,
mlan_ioctl_req *pioctl_req)
{
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_status ret = MLAN_STATUS_SUCCESS;
t_u16 cmd_action = 0;
mlan_ds_misc_cfg *misc = MNULL;
ENTER();
misc = (mlan_ds_misc_cfg *)pioctl_req->pbuf;
cmd_action = pioctl_req->action;
/* Send request to firmware */
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_802_11_STATS, cmd_action, 0,
(t_void *)pioctl_req,
(t_void *)&misc->param.stats);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief Set/Get deauth control.
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status wlan_uap_snmp_mib_ctrl_deauth(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_status ret = MLAN_STATUS_SUCCESS;
mlan_ds_snmp_mib *mib = (mlan_ds_snmp_mib *)pioctl_req->pbuf;
t_u16 cmd_action = 0;
ENTER();
mib = (mlan_ds_snmp_mib *)pioctl_req->pbuf;
if (pioctl_req->action == MLAN_ACT_SET) {
cmd_action = HostCmd_ACT_GEN_SET;
} else {
cmd_action = HostCmd_ACT_GEN_GET;
}
/* Send command to firmware */
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_802_11_SNMP_MIB, cmd_action,
StopDeauth_i, (t_void *)pioctl_req,
&mib->param.deauthctrl);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief Set/Get channel tracking control.
*
* @param pmadapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_PENDING --success, otherwise fail
*/
static mlan_status wlan_uap_snmp_mib_chan_track(pmlan_adapter pmadapter,
pmlan_ioctl_req pioctl_req)
{
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
mlan_status ret = MLAN_STATUS_SUCCESS;
mlan_ds_snmp_mib *mib = (mlan_ds_snmp_mib *)pioctl_req->pbuf;
t_u16 cmd_action = 0;
ENTER();
mib = (mlan_ds_snmp_mib *)pioctl_req->pbuf;
if (pioctl_req->action == MLAN_ACT_SET) {
cmd_action = HostCmd_ACT_GEN_SET;
} else {
cmd_action = HostCmd_ACT_GEN_GET;
}
/* Send command to firmware */
ret = wlan_prepare_cmd(pmpriv, HostCmd_CMD_802_11_SNMP_MIB, cmd_action,
ChanTrackParam_i, (t_void *)pioctl_req,
&mib->param.chan_track);
if (ret == MLAN_STATUS_SUCCESS)
ret = MLAN_STATUS_PENDING;
LEAVE();
return ret;
}
/**
* @brief MLAN uap ioctl handler
*
* @param adapter A pointer to mlan_adapter structure
* @param pioctl_req A pointer to ioctl request buffer
*
* @return MLAN_STATUS_SUCCESS --success, otherwise fail
*/
mlan_status wlan_ops_uap_ioctl(t_void *adapter, pmlan_ioctl_req pioctl_req)
{
pmlan_adapter pmadapter = (pmlan_adapter)adapter;
mlan_status status = MLAN_STATUS_SUCCESS;
mlan_ds_bss *bss = MNULL;
mlan_ds_get_info *pget_info = MNULL;
mlan_ds_misc_cfg *misc = MNULL;
mlan_ds_sec_cfg *sec = MNULL;
mlan_ds_power_cfg *power = MNULL;
mlan_ds_pm_cfg *pm = MNULL;
mlan_ds_11d_cfg *cfg11d = MNULL;
mlan_ds_snmp_mib *snmp = MNULL;
mlan_ds_11h_cfg *cfg11h = MNULL;
mlan_ds_radio_cfg *radiocfg = MNULL;
mlan_ds_rate *rate = MNULL;
mlan_ds_reg_mem *reg_mem = MNULL;
mlan_private *pmpriv = pmadapter->priv[pioctl_req->bss_index];
ENTER();
switch (pioctl_req->req_id) {
case MLAN_IOCTL_BSS:
bss = (mlan_ds_bss *)pioctl_req->pbuf;
if (bss->sub_command == MLAN_OID_BSS_MAC_ADDR)
status = wlan_uap_bss_ioctl_mac_address(pmadapter,
pioctl_req);
else if (bss->sub_command == MLAN_OID_BSS_STOP)
status = wlan_uap_bss_ioctl_stop(pmadapter, pioctl_req);
else if (bss->sub_command == MLAN_OID_BSS_START)
status =
wlan_uap_bss_ioctl_start(pmadapter, pioctl_req);
else if (bss->sub_command == MLAN_OID_UAP_BSS_CONFIG)
status = wlan_uap_bss_ioctl_config(pmadapter,
pioctl_req);
else if (bss->sub_command == MLAN_OID_UAP_DEAUTH_STA)
status = wlan_uap_bss_ioctl_deauth_sta(pmadapter,
pioctl_req);
else if (bss->sub_command == MLAN_OID_UAP_BSS_RESET)
status =
wlan_uap_bss_ioctl_reset(pmadapter, pioctl_req);
#if defined(STA_SUPPORT) && defined(UAP_SUPPORT)
else if (bss->sub_command == MLAN_OID_BSS_ROLE) {
util_enqueue_list_tail(
pmadapter->pmoal_handle,
&pmadapter->ioctl_pending_q,
(pmlan_linked_list)pioctl_req,
pmadapter->callbacks.moal_spin_lock,
pmadapter->callbacks.moal_spin_unlock);
pmadapter->pending_ioctl = MTRUE;
status = MLAN_STATUS_PENDING;
}
#endif
#ifdef WIFI_DIRECT_SUPPORT
else if (bss->sub_command == MLAN_OID_WIFI_DIRECT_MODE)
status = wlan_bss_ioctl_wifi_direct_mode(pmadapter,
pioctl_req);
#endif
else if (bss->sub_command == MLAN_OID_BSS_REMOVE)
status = wlan_bss_ioctl_bss_remove(pmadapter,
pioctl_req);
else if (bss->sub_command == MLAN_OID_UAP_CFG_WMM_PARAM)
status = wlan_uap_bss_ioctl_uap_wmm_param(pmadapter,
pioctl_req);
else if (bss->sub_command == MLAN_OID_UAP_SCAN_CHANNELS)
status = wlan_uap_bss_ioctl_uap_scan_channels(
pmadapter, pioctl_req);
else if (bss->sub_command == MLAN_OID_UAP_CHANNEL)
status = wlan_uap_bss_ioctl_uap_channel(pmadapter,
pioctl_req);
else if (bss->sub_command == MLAN_OID_UAP_ACS_SCAN)
status = wlan_uap_bss_ioctl_acs_scan(pmadapter,
pioctl_req);
else if (bss->sub_command == MLAN_OID_UAP_OPER_CTRL)
status = wlan_uap_bss_ioctl_uap_oper_ctrl(pmadapter,
pioctl_req);
else if (bss->sub_command == MLAN_OID_UAP_ADD_STATION)
status = wlan_uap_bss_ioctl_add_station(pmadapter,
pioctl_req);
else if (bss->sub_command == MLAN_OID_ACTION_CHAN_SWITCH)
status = wlan_uap_bss_ioctl_action_chan_switch(
pmadapter, pioctl_req);
break;
#ifdef STA_SUPPORT
case MLAN_IOCTL_SCAN:
status = wlan_scan_ioctl(pmadapter, pioctl_req);
break;
#endif
case MLAN_IOCTL_GET_INFO:
pget_info = (mlan_ds_get_info *)pioctl_req->pbuf;
if (pget_info->sub_command == MLAN_OID_GET_VER_EXT)
status = wlan_get_info_ver_ext(pmadapter, pioctl_req);
else if (pget_info->sub_command == MLAN_OID_GET_DEBUG_INFO)
status =
wlan_get_info_debug_info(pmadapter, pioctl_req);
else if (pget_info->sub_command == MLAN_OID_GET_STATS)
status = wlan_uap_get_stats(pmadapter, pioctl_req);
else if (pget_info->sub_command == MLAN_OID_GET_UAP_STATS_LOG)
status = wlan_uap_get_stats_log(pmadapter, pioctl_req);
else if (pget_info->sub_command == MLAN_OID_UAP_STA_LIST)
status = wlan_uap_get_sta_list(pmadapter, pioctl_req);
else if (pget_info->sub_command == MLAN_OID_GET_BSS_INFO)
status = wlan_uap_get_bss_info(pmadapter, pioctl_req);
else if (pget_info->sub_command == MLAN_OID_GET_FW_INFO) {
pioctl_req->data_read_written =
sizeof(mlan_fw_info) + MLAN_SUB_COMMAND_SIZE;
memcpy_ext(pmadapter,
&pget_info->param.fw_info.mac_addr,
pmpriv->curr_addr, MLAN_MAC_ADDR_LENGTH,
MLAN_MAC_ADDR_LENGTH);
pget_info->param.fw_info.fw_ver =
pmadapter->fw_release_number;
pget_info->param.fw_info.hotfix_version =
pmadapter->fw_hotfix_ver;
pget_info->param.fw_info.tx_buf_size =
pmadapter->tx_buf_size;
pget_info->param.fw_info.fw_bands = pmadapter->fw_bands;
pget_info->param.fw_info.ecsa_enable =
pmadapter->ecsa_enable;
pget_info->param.fw_info.getlog_enable =
pmadapter->getlog_enable;
pget_info->param.fw_info.hw_dev_mcs_support =
pmadapter->hw_dev_mcs_support;
pget_info->param.fw_info.hw_mpdu_density =
pmadapter->hw_mpdu_density;
pget_info->param.fw_info.hw_dot_11n_dev_cap =
pmadapter->hw_dot_11n_dev_cap;
pget_info->param.fw_info.usr_dev_mcs_support =
pmpriv->usr_dev_mcs_support;
if (IS_FW_SUPPORT_NO_80MHZ(pmadapter))
pget_info->param.fw_info.prohibit_80mhz = MTRUE;
else
pget_info->param.fw_info.prohibit_80mhz =
MFALSE;
pget_info->param.fw_info.hw_dot_11ac_mcs_support =
pmadapter->hw_dot_11ac_mcs_support;
pget_info->param.fw_info.hw_dot_11ac_dev_cap =
pmadapter->hw_dot_11ac_dev_cap;
pget_info->param.fw_info.usr_dot_11ac_dev_cap_bg =
pmpriv->usr_dot_11ac_dev_cap_bg;
pget_info->param.fw_info.usr_dot_11ac_mcs_support =
pmpriv->usr_dot_11ac_mcs_support;
pget_info->param.fw_info.usr_dot_11ac_dev_cap_a =
pmpriv->usr_dot_11ac_dev_cap_a;
pget_info->param.fw_info.hw_hecap_len =
pmadapter->hw_hecap_len;
pget_info->param.fw_info.hw_2g_hecap_len =
pmadapter->hw_2g_hecap_len;
memcpy_ext(pmadapter,
pget_info->param.fw_info.hw_he_cap,
pmadapter->hw_he_cap,
pmadapter->hw_hecap_len,
sizeof(pget_info->param.fw_info.hw_he_cap));
memcpy_ext(
pmadapter,
pget_info->param.fw_info.hw_2g_he_cap,
pmadapter->hw_2g_he_cap,
pmadapter->hw_2g_hecap_len,
sizeof(pget_info->param.fw_info.hw_2g_he_cap));
pget_info->param.fw_info.region_code =
pmadapter->region_code;
if (pmadapter->otp_region &&
pmadapter->otp_region->force_reg)
pget_info->param.fw_info.force_reg = MTRUE;
else
pget_info->param.fw_info.force_reg = MFALSE;
pget_info->param.fw_info.fw_supplicant_support =
IS_FW_SUPPORT_SUPPLICANT(pmadapter) ? 0x01 :
0x00;
pget_info->param.fw_info.antinfo = pmadapter->antinfo;
pget_info->param.fw_info.max_ap_assoc_sta =
pmadapter->max_sta_conn;
pget_info->param.fw_info.uuid_lo = pmadapter->uuid_lo;
pget_info->param.fw_info.uuid_hi = pmadapter->uuid_hi;
pget_info->param.fw_info.cmd_tx_data =
IS_FW_SUPPORT_CMD_TX_DATA(pmadapter) ? 0x01 :
0x00;
pget_info->param.fw_info.sec_rgpower =
IS_FW_SUPPORT_SEC_RG_POWER(pmadapter) ? 0x01 :
0x00;
} else if (pget_info->sub_command == MLAN_OID_LINK_STATS)
status = wlan_ioctl_link_statistic(pmpriv, pioctl_req);
break;
case MLAN_IOCTL_MISC_CFG:
misc = (mlan_ds_misc_cfg *)pioctl_req->pbuf;
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
if (misc->sub_command == MLAN_OID_MISC_GET_SENSOR_TEMP) {
status = wlan_misc_ioctl_get_sensor_temp(pmadapter,
pioctl_req);
}
if (misc->sub_command == MLAN_OID_MISC_INIT_SHUTDOWN)
status = wlan_misc_ioctl_init_shutdown(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_SOFT_RESET)
status = wlan_uap_misc_ioctl_soft_reset(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_WARM_RESET) {
PRINTM(MCMND, "Request UAP WARM RESET\n");
util_enqueue_list_tail(
pmadapter->pmoal_handle,
&pmadapter->ioctl_pending_q,
(pmlan_linked_list)pioctl_req,
pmadapter->callbacks.moal_spin_lock,
pmadapter->callbacks.moal_spin_unlock);
pmadapter->pending_ioctl = MTRUE;
status = MLAN_STATUS_PENDING;
}
if (misc->sub_command == MLAN_OID_MISC_HOST_CMD)
status =
wlan_misc_ioctl_host_cmd(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_REGION)
status = wlan_misc_ioctl_region(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_GEN_IE)
status = wlan_uap_misc_ioctl_gen_ie(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_CUSTOM_IE)
status = wlan_misc_ioctl_custom_ie_list(
pmadapter, pioctl_req, MTRUE);
if (misc->sub_command == MLAN_OID_MISC_TX_DATAPAUSE)
status = wlan_uap_misc_ioctl_txdatapause(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_RX_MGMT_IND)
status = wlan_reg_rx_mgmt_ind(pmadapter, pioctl_req);
#ifdef DEBUG_LEVEL1
if (misc->sub_command == MLAN_OID_MISC_DRVDBG)
status = wlan_set_drvdbg(pmadapter, pioctl_req);
#endif
if (misc->sub_command == MLAN_OID_MISC_TXCONTROL)
status = wlan_misc_ioctl_txcontrol(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_MAC_CONTROL)
status = wlan_misc_ioctl_mac_control(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_MULTI_CHAN_CFG)
status = wlan_misc_ioctl_multi_chan_config(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_MULTI_CHAN_POLICY)
status = wlan_misc_ioctl_multi_chan_policy(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_DRCS_CFG)
status = wlan_misc_ioctl_drcs_config(pmadapter,
pioctl_req);
#ifdef WIFI_DIRECT_SUPPORT
if (misc->sub_command == MLAN_OID_MISC_WIFI_DIRECT_CONFIG)
status = wlan_misc_p2p_config(pmadapter, pioctl_req);
#endif
if (misc->sub_command == MLAN_OID_MISC_GPIO_TSF_LATCH)
status = wlan_misc_gpio_tsf_latch_config(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_GET_TSF_INFO)
status = wlan_misc_get_tsf_info(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_DFS_REAPTER_MODE) {
mlan_ds_misc_cfg *misc_cfg = MNULL;
misc_cfg = (mlan_ds_misc_cfg *)pioctl_req->pbuf;
misc_cfg->param.dfs_repeater.mode =
pmadapter->dfs_repeater;
pioctl_req->data_read_written =
sizeof(mlan_ds_misc_dfs_repeater);
status = MLAN_STATUS_SUCCESS;
}
if (misc->sub_command == MLAN_OID_MISC_IND_RST_CFG)
status = wlan_misc_ioctl_ind_rst_cfg(pmadapter,
pioctl_req);
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
if (misc->sub_command == MLAN_OID_MISC_MC_AGGR_CFG)
status = wlan_misc_ioctl_mc_aggr_cfg(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_STATS)
status = wlan_misc_ioctl_stats(pmadapter, pioctl_req);
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
if (misc->sub_command == MLAN_OID_MISC_CH_LOAD)
status = wlan_misc_ioctl_ch_load(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_CH_LOAD_RESULTS)
status = wlan_misc_ioctl_ch_load_results(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_GET_TSF)
status = wlan_misc_ioctl_get_tsf(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_CROSS_CHIP_SYNCH) {
status = wlan_misc_ioctl_cross_chip_synch(pmadapter,
pioctl_req);
}
if (misc->sub_command == MLAN_OID_MISC_GET_CHAN_REGION_CFG)
status = wlan_misc_chan_reg_cfg(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_OPER_CLASS_CHECK)
status = wlan_misc_ioctl_operclass_validation(
pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_OPER_CLASS)
status = wlan_misc_ioctl_oper_class(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_AGGR_CTRL)
status = wlan_misc_ioctl_aggr_ctrl(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_PER_PKT_CFG)
status = wlan_misc_per_pkt_cfg(pmadapter, pioctl_req);
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
if (misc->sub_command == MLAN_OID_MISC_NET_MONITOR)
status = wlan_misc_ioctl_net_monitor(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_FW_DUMP_EVENT)
status = wlan_misc_ioctl_fw_dump_event(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_RX_ABORT_CFG)
status = wlan_misc_ioctl_rxabortcfg(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_OFDM_DESENSE_CFG)
status = wlan_misc_ioctl_ofdmdesense_cfg(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_RX_ABORT_CFG_EXT)
status = wlan_misc_ioctl_rxabortcfg_ext(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_NAV_MITIGATION)
status = wlan_misc_ioctl_nav_mitigation(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_LED_CONFIG)
status = wlan_misc_ioctl_led(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_TX_AMPDU_PROT_MODE)
status = wlan_misc_ioctl_tx_ampdu_prot_mode(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_DOT11MC_UNASSOC_FTM_CFG)
status = wlan_misc_ioctl_dot11mc_unassoc_ftm_cfg(
pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_HAL_PHY_CFG)
status = wlan_misc_hal_phy_cfg(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_RATE_ADAPT_CFG)
status = wlan_misc_ioctl_rate_adapt_cfg(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_CCK_DESENSE_CFG)
status = wlan_misc_ioctl_cck_desense_cfg(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_ROBUSTCOEX)
status = wlan_misc_robustcoex(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_DMCS_CONFIG)
status = wlan_misc_dmcs_config(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_CONFIG_RTT)
status = wlan_config_rtt(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_CANCEL_RTT)
status = wlan_cancel_rtt(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_RTT_RESPONDER_CFG)
status = wlan_rtt_responder_cfg(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_GET_TX_RX_HISTOGRAM)
status =
wlan_get_tx_rx_histogram(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_CFP_INFO)
status = wlan_get_cfpinfo(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_BOOT_SLEEP)
status = wlan_misc_bootsleep(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_DYN_BW)
status = wlan_misc_ioctl_dyn_bw(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_GET_CHAN_TRPC_CFG)
status = wlan_get_chan_trpc_cfg(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_BAND_STEERING)
status = wlan_misc_band_steering_cfg(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_BEACON_STUCK)
status = wlan_misc_beacon_stuck_cfg(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_GET_REGIONPWR_CFG)
status = wlan_get_rgchnpwr_cfg(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_REGION_POWER_CFG)
status = wlan_misc_region_power_cfg(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_CFP_TABLE)
status = wlan_get_cfp_table(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_RANGE_EXT)
status = wlan_misc_ioctl_range_ext(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_WACP_MODE)
status = wlan_misc_ioctl_wacp_mode(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_COUNTRY_CODE)
status = wlan_misc_ioctl_country_code(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_REORDER_FLUSH_TIME)
status = wlan_misc_ioctl_reorder_flush_time(pmadapter,
pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_EXT_CAP_CFG)
status = wlan_misc_ext_capa_cfg(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_TX_FRAME)
status =
wlan_misc_ioctl_tx_frame(pmadapter, pioctl_req);
if (misc->sub_command == MLAN_OID_MISC_EDMAC_CONFIG)
status = wlan_misc_ioctl_edmac_cfg(pmadapter,
pioctl_req);
break;
case MLAN_IOCTL_POWER_CFG:
power = (mlan_ds_power_cfg *)pioctl_req->pbuf;
if (power->sub_command == MLAN_OID_POWER_LOW_POWER_MODE)
status = wlan_power_ioctl_set_get_lpm(pmadapter,
pioctl_req);
break;
case MLAN_IOCTL_PM_CFG:
pm = (mlan_ds_pm_cfg *)pioctl_req->pbuf;
if (pm->sub_command == MLAN_OID_PM_CFG_PS_MODE)
status = wlan_uap_pm_ioctl_mode(pmadapter, pioctl_req);
if (pm->sub_command == MLAN_OID_PM_CFG_DEEP_SLEEP)
status = wlan_uap_pm_ioctl_deepsleep(pmadapter,
pioctl_req);
if (pm->sub_command == MLAN_OID_PM_CFG_HS_CFG)
status = wlan_pm_ioctl_hscfg(pmadapter, pioctl_req);
if (pm->sub_command == MLAN_OID_PM_HS_WAKEUP_REASON)
status = wlan_get_hs_wakeup_reason(pmadapter,
pioctl_req);
if (pm->sub_command == MLAN_OID_PM_MGMT_FILTER)
status = wlan_config_mgmt_filter(pmadapter, pioctl_req);
if (pm->sub_command == MLAN_OID_PM_INFO)
status = wlan_get_pm_info(pmadapter, pioctl_req);
break;
case MLAN_IOCTL_SNMP_MIB:
snmp = (mlan_ds_snmp_mib *)pioctl_req->pbuf;
if (snmp->sub_command == MLAN_OID_SNMP_MIB_CTRL_DEAUTH)
status = wlan_uap_snmp_mib_ctrl_deauth(pmadapter,
pioctl_req);
if (snmp->sub_command == MLAN_OID_SNMP_MIB_DOT11D)
status = wlan_uap_snmp_mib_11d(pmadapter, pioctl_req);
if (snmp->sub_command == MLAN_OID_SNMP_MIB_DOT11H)
status = wlan_uap_snmp_mib_11h(pmadapter, pioctl_req);
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
if (snmp->sub_command == MLAN_OID_SNMP_MIB_DOT11H_FAKERADAR)
status = wlan_uap_snmp_mib_11h_fakeradar(pmadapter,
pioctl_req);
if (snmp->sub_command == MLAN_OID_SNMP_MIB_CHAN_TRACK)
status = wlan_uap_snmp_mib_chan_track(pmadapter,
pioctl_req);
break;
case MLAN_IOCTL_SEC_CFG:
sec = (mlan_ds_sec_cfg *)pioctl_req->pbuf;
if (sec->sub_command == MLAN_OID_SEC_CFG_ENCRYPT_KEY)
status = wlan_uap_sec_ioctl_set_encrypt_key(pmadapter,
pioctl_req);
if (sec->sub_command == MLAN_OID_SEC_CFG_WAPI_ENABLED)
status = wlan_uap_sec_ioctl_wapi_enable(pmadapter,
pioctl_req);
if (sec->sub_command == MLAN_OID_SEC_CFG_REPORT_MIC_ERR)
status = wlan_uap_sec_ioctl_report_mic_error(
pmadapter, pioctl_req);
break;
case MLAN_IOCTL_11N_CFG:
status = wlan_11n_cfg_ioctl(pmadapter, pioctl_req);
break;
case MLAN_IOCTL_11D_CFG:
cfg11d = (mlan_ds_11d_cfg *)pioctl_req->pbuf;
if (cfg11d->sub_command == MLAN_OID_11D_DOMAIN_INFO)
status = wlan_uap_domain_info(pmadapter, pioctl_req);
else if (cfg11d->sub_command == MLAN_OID_11D_DOMAIN_INFO_EXT)
status =
wlan_11d_cfg_domain_info(pmadapter, pioctl_req);
break;
case MLAN_IOCTL_11H_CFG:
cfg11h = (mlan_ds_11h_cfg *)pioctl_req->pbuf;
if (cfg11h->sub_command == MLAN_OID_11H_CHANNEL_CHECK)
status = wlan_uap_11h_channel_check_req(pmadapter,
pioctl_req);
if (cfg11h->sub_command == MLAN_OID_11H_DFS_TESTING)
status = wlan_11h_ioctl_dfs_testing(pmadapter,
pioctl_req);
if (cfg11h->sub_command == MLAN_OID_11H_CHAN_NOP_INFO)
status = wlan_11h_ioctl_channel_nop_info(pmadapter,
pioctl_req);
if (cfg11h->sub_command == MLAN_OID_11H_NOP_CHAN_LIST)
status = wlan_11h_ioctl_nop_channel_list(pmadapter,
pioctl_req);
if (cfg11h->sub_command == MLAN_OID_11H_CHAN_REPORT_REQUEST)
status = wlan_11h_ioctl_dfs_chan_report(pmpriv,
pioctl_req);
if (cfg11h->sub_command == MLAN_OID_11H_CHAN_SWITCH_COUNT)
status = wlan_11h_ioctl_chan_switch_count(pmadapter,
pioctl_req);
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
if (cfg11h->sub_command == MLAN_OID_11H_CHAN_DFS_STATE)
status = wlan_11h_ioctl_chan_dfs_state(pmadapter,
pioctl_req);
if (cfg11h->sub_command == MLAN_OID_11H_DFS_W53_CFG)
status = wlan_11h_ioctl_dfs_w53_cfg(pmadapter,
pioctl_req);
if (cfg11h->sub_command == MLAN_OID_11H_DFS_MODE)
status = wlan_11h_ioctl_dfs_mode(pmadapter, pioctl_req);
break;
case MLAN_IOCTL_RADIO_CFG:
radiocfg = (mlan_ds_radio_cfg *)pioctl_req->pbuf;
if (radiocfg->sub_command == MLAN_OID_MIMO_SWITCH)
status = wlan_radio_ioctl_mimo_switch_cfg(pmadapter,
pioctl_req);
if (radiocfg->sub_command == MLAN_OID_RADIO_CTRL)
status = wlan_radio_ioctl_radio_ctl(pmadapter,
pioctl_req);
if (radiocfg->sub_command == MLAN_OID_REMAIN_CHAN_CFG)
status = wlan_radio_ioctl_remain_chan_cfg(pmadapter,
pioctl_req);
if (radiocfg->sub_command == MLAN_OID_ANT_CFG)
status =
wlan_radio_ioctl_ant_cfg(pmadapter, pioctl_req);
if (radiocfg->sub_command == MLAN_OID_BAND_CFG)
status = wlan_radio_ioctl_band_cfg(pmadapter,
pioctl_req);
break;
case MLAN_IOCTL_RATE:
rate = (mlan_ds_rate *)pioctl_req->pbuf;
if (rate->sub_command == MLAN_OID_RATE_CFG)
status = wlan_rate_ioctl_cfg(pmadapter, pioctl_req);
else if (rate->sub_command == MLAN_OID_GET_DATA_RATE)
status = wlan_rate_ioctl_get_data_rate(pmadapter,
pioctl_req);
break;
case MLAN_IOCTL_11AC_CFG:
status = wlan_11ac_cfg_ioctl(pmadapter, pioctl_req);
break;
case MLAN_IOCTL_11AX_CFG:
status = wlan_11ax_cfg_ioctl(pmadapter, pioctl_req);
break;
case MLAN_IOCTL_REG_MEM:
reg_mem = (mlan_ds_reg_mem *)pioctl_req->pbuf;
if (reg_mem->sub_command == MLAN_OID_REG_RW)
status = wlan_reg_mem_ioctl_reg_rw(pmadapter,
pioctl_req);
else if (reg_mem->sub_command == MLAN_OID_EEPROM_RD)
status = wlan_reg_mem_ioctl_read_eeprom(pmadapter,
pioctl_req);
else if (reg_mem->sub_command == MLAN_OID_MEM_RW)
status = wlan_reg_mem_ioctl_mem_rw(pmadapter,
pioctl_req);
break;
case MLAN_IOCTL_WMM_CFG:
status = wlan_wmm_cfg_ioctl(pmadapter, pioctl_req);
break;
default:
pioctl_req->status_code = MLAN_ERROR_IOCTL_INVALID;
break;
}
LEAVE();
return status;
}