mwifiex/mxm_wifiex/wlan_src/mapp/mlanconfig/config/tx_ctrl.conf

#protocol
Protocol=0x88dc

# configure data rate in unit of 0.5Mbps
# 0 - auto rate determined by firmware
# Any other data rate except these data rates will
# be overwritten by default data rate.
# datarate index, unit in 0.5Mbps
# Index |  20MHz  | 10MHz
#  12   |  6Mbps  | 3Mbps
#  18   |  9Mbps  | 4.5Mbps
#  24   |  12Mbps | 6Mbps
#  36   |  18Mbps | 9Mbps
#  48   |  24Mbps | 12Mbps
#  72   |  36Mbps | 18Mbps
#  96   |  48Mbps | 24Mbps
#  108  |  54Mbps | 27.5Mbps
Datarate=12

# configure Channel for the packet
# 0 - the channel set during the enable would be used
Channel=0

# configure Bandwith (only for 11p)
# 0: auto bandwith setting by firmware
# bit4: 1 use bit[3:0] bandwith setting
# bit[3:0]:
#         0 - 5MHz
#         1 - 10MHz
#         2 - 20MHz
#         3 - 40MHz
#         4 - 80MHz
Bandwidth=0x00

# configure power settings
# bit[7]    host tx power control flag
#            0x0: use fw setting for tx power
#            0x1: value specified in bit[6] and bit[5:0] are valid
# bit[6]    sign of the power specified in bit[5:0]
#            0x0: power specified in bit[5:0] is postive (+)
#            0x1: power specified in bit[5:0] is negative (-)
# bit[5:0]  power to be used for transmission (in dBm)
Power=0x00

# configure Priority of the packet
# 1,2 - BK
# 0,3 - BE
# 4,5 - VI
# 6,7 - VO
Priority=0

# configure tx retry time
Retry_limit=0

# Destination MAC Address
Addr=00:50:43:22:0f:b0

Data=0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x8,0x9,0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x8,0x9,0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x8,0x9,0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19
mxm_wifiex: add nxp mxm_wifiex sdk Add initial MxM (multi-chip-multi-interface) wifi driver. The driver target is to support 88w8987/88w8997/88w9098, currently it only supports 88w8987. The MxM wifi driver is merged from below repo and applied some patches for block and build issues. ssh://git@bitbucket.sw.nxp.com/wcswrel/ rel-nxp-wifi-fp92-bt-fp85-linux-android-mxm4x17169-gpl.git The sdk only includes application, the driver already is merged into linux kernel. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> 2020-04-19 16:54:27 +00:00			`#protocol`
			`Protocol=0x88dc`

			`# configure data rate in unit of 0.5Mbps`
			`# 0 - auto rate determined by firmware`
			`# Any other data rate except these data rates will`
			`# be overwritten by default data rate.`
			`# datarate index, unit in 0.5Mbps`
			`# Index \| 20MHz \| 10MHz`
			`# 12 \| 6Mbps \| 3Mbps`
			`# 18 \| 9Mbps \| 4.5Mbps`
			`# 24 \| 12Mbps \| 6Mbps`
			`# 36 \| 18Mbps \| 9Mbps`
			`# 48 \| 24Mbps \| 12Mbps`
			`# 72 \| 36Mbps \| 18Mbps`
			`# 96 \| 48Mbps \| 24Mbps`
			`# 108 \| 54Mbps \| 27.5Mbps`
			`Datarate=12`

			`# configure Channel for the packet`
			`# 0 - the channel set during the enable would be used`
			`Channel=0`

			`# configure Bandwith (only for 11p)`
			`# 0: auto bandwith setting by firmware`
			`# bit4: 1 use bit[3:0] bandwith setting`
			`# bit[3:0]:`
			`# 0 - 5MHz`
			`# 1 - 10MHz`
			`# 2 - 20MHz`
			`# 3 - 40MHz`
			`# 4 - 80MHz`
			`Bandwidth=0x00`

			`# configure power settings`
			`# bit[7] host tx power control flag`
			`# 0x0: use fw setting for tx power`
			`# 0x1: value specified in bit[6] and bit[5:0] are valid`
			`# bit[6] sign of the power specified in bit[5:0]`
			`# 0x0: power specified in bit[5:0] is postive (+)`
			`# 0x1: power specified in bit[5:0] is negative (-)`
			`# bit[5:0] power to be used for transmission (in dBm)`
			`Power=0x00`

			`# configure Priority of the packet`
			`# 1,2 - BK`
			`# 0,3 - BE`
			`# 4,5 - VI`
			`# 6,7 - VO`
			`Priority=0`

			`# configure tx retry time`
			`Retry_limit=0`

			`# Destination MAC Address`
			`Addr=00:50:43:22:0f:b0`

			`Data=0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x8,0x9,0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x8,0x9,0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x8,0x9,0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19`