mwifiex/mxm_wifiex/wlan_src/mlinux/moal_usb.h

263 lines
7.7 KiB
C
Raw Normal View History

/** @file moal_usb.h
*
* @brief This file contains definitions for USB interface.
* driver.
*
*
* Copyright 2008-2021 NXP
*
* This software file (the File) is distributed by NXP
* under the terms of the GNU General Public License Version 2, June 1991
* (the License). You may use, redistribute and/or modify the File in
* accordance with the terms and conditions of the License, a copy of which
* is available by writing to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
* worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
*
* THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
* this warranty disclaimer.
*
*/
/*************************************************************
Change Log:
10/21/2008: initial version
************************************************************/
#ifndef _MOAL_USB_H
#define _MOAL_USB_H
#ifdef USB8801
/** USB VID 1 */
#define USB8801_VID_1 0x1286
/** USB PID 1 */
#define USB8801_PID_1 0x2049
/** USB PID 2 */
#define USB8801_PID_2 0x204a
#endif /* USB8801 */
#ifdef USB8997
/** USB VID 1 */
#define USB8997_VID_1 0x1286
/** USB PID 1 */
#define USB8997_PID_1 0x204D
/** USB PID 2 */
#define USB8997_PID_2 0x204E
#define USB8997_PID_3 0x2047
#define USB8997_PID_4 0x2048
#define USB8997_PID_5 0x2050
#define USB8997_PID_6 0x2051
#define USB8997V2_PID_1 0x2052
#endif /* USB8997 */
#ifdef USB8978
/** USB VID 1 */
#define USB8978_VID_1 0x1286
/** USB PID 1 */
#define USB8978_PID_1 0x2062
/** USB PID 2 */
#define USB8978_PID_2 0x2063
/* BT downloaded combo firmware; register for WLAN enumeration */
#define USB8978_PID_1_BT 0x2064
#define USB8978_PID_2_BT 0x2065
#endif
#ifdef USB8897
/** USB VID 1 */
#define USB8897_VID_1 0x1286
/** USB PID 1 */
#define USB8897_PID_1 0x2045
/** USB PID 2 */
#define USB8897_PID_2 0x2046
#endif /* USB8897 */
#ifdef USB9098
/** USB VID 1 */
#define USB9098_VID_1 0x1286
/** USB PID 1 */
#define USB9098_PID_1 0x2056
/** USB PID 2 */
#define USB9098_PID_2 0x2057
#endif /* USB9098 */
#ifdef USB9097
/** USB VID 1 */
#define USB9097_VID_1 0x1286
/** USB PID 1 */
#define USB9097_PID_1 0x2060
/** USB PID 2 */
#define USB9097_PID_2 0x2061
#endif /* USB9097 */
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
#ifdef USBNW62X
/** USB VID 1 */
#define USBNW62X_VID_1 0x0471
/** USB PID 1 */
#define USBNW62X_PID_1 0x020E
/** USB PID 2 */
#define USBNW62X_PID_2 0x020F
#endif /* USBNW62X */
/** Boot state: FW download */
#define USB_FW_DNLD 1
/** Boot state: FW ready */
#define USB_FW_READY 2
/** High watermark for Tx data */
#define MVUSB_TX_HIGH_WMARK 12
/** Number of Rx data URB */
#define MVUSB_RX_DATA_URB 6
#if defined(USB8997) || defined(USB9098) || defined(USB9097) || \
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
defined(USB8978) || defined(USB8801) || defined(USBNW62X)
/* Transmit buffer size for chip revision check */
#define CHIP_REV_TX_BUF_SIZE 16
/* Receive buffer size for chip revision check */
#define CHIP_REV_RX_BUF_SIZE 2048
/* Extensions */
#define EXTEND_HDR (0xAB950000)
#define EXTEND_V1 (0x00000001)
#define EXTEND_V2 (0x00000002)
#ifdef USB8801
#define USB8801_DEFAULT_WLAN_FW_NAME "nxp/usb8801_uapsta.bin"
#endif /* USB8801 */
#endif
/** Default firmaware name */
#ifdef USB8997
#define USB8997_DEFAULT_COMBO_FW_NAME "nxp/usbusb8997_combo_v4.bin"
#define USB8997_DEFAULT_WLAN_FW_NAME "nxp/usb8997_wlan_v4.bin"
#define USBUART8997_DEFAULT_COMBO_FW_NAME "nxp/usbuart8997_combo_v4.bin"
#define USBUSB8997_DEFAULT_COMBO_FW_NAME "nxp/usbusb8997_combo_v4.bin"
#endif /* USB8997 */
#ifdef USB8978
#define USB8978_DEFAULT_COMBO_FW_NAME "nxp/usbusbiw416_combo.bin"
#define USB8978_DEFAULT_WLAN_FW_NAME "nxp/usbiw416_wlan.bin"
#define USBUART8978_DEFAULT_COMBO_FW_NAME "nxp/usbuartiw416_combo.bin"
#define USBUSB8978_DEFAULT_COMBO_FW_NAME "nxp/usbusbiw416_combo.bin"
#endif /* USB8978 */
#ifdef USB8897
#define USB8897_DEFAULT_COMBO_FW_NAME "nxp/usb8897_uapsta.bin"
#define USB8897_DEFAULT_WLAN_FW_NAME "nxp/usb8897_wlan.bin"
#endif /* USB8897 */
#ifdef USB9098
#define USB9098_Z1Z2 0x00
#define USB9098_A0 0x01
#define USB9098_A1 0x02
#define USB9098_A2 0x03
#define USB9098_DEFAULT_COMBO_FW_NAME "nxp/usbusb9098_combo.bin"
#define USB9098_DEFAULT_WLAN_FW_NAME "nxp/usb9098_wlan.bin"
#define USBUART9098_DEFAULT_COMBO_FW_NAME "nxp/usbuart9098_combo.bin"
#define USBUSB9098_DEFAULT_COMBO_FW_NAME "nxp/usbusb9098_combo.bin"
#define USB9098_WLAN_V1_FW_NAME "nxp/usb9098_wlan_v1.bin"
#define USBUART9098_COMBO_V1_FW_NAME "nxp/usbuart9098_combo_v1.bin"
#define USBUSB9098_COMBO_V1_FW_NAME "nxp/usbusb9098_combo_v1.bin"
#endif /* USB9098 */
#ifdef USB9097
#define USB9097_B0 0x01
#define USB9097_B1 0x02
#define USB9097_DEFAULT_COMBO_FW_NAME "nxp/usbusbiw620_combo_v1.bin"
#define USB9097_DEFAULT_WLAN_FW_NAME "nxp/usbiw620_wlan_v1.bin"
#define USB9097_WLAN_V1_FW_NAME "nxp/usbiw620_wlan_v1.bin"
#define USBUART9097_COMBO_V1_FW_NAME "nxp/usbuartiw620_combo_v1.bin"
#define USBUSB9097_COMBO_V1_FW_NAME "nxp/usbusbiw620_combo_v1.bin"
#endif /* USB9097 */
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
#ifdef USBNW62X
#define USBNW62X_DEFAULT_COMBO_FW_NAME "nxp/usbusbnw62x_combo.bin"
#define USBUARTNW62X_COMBO_FW_NAME "nxp/usbuartnw62x_combo.bin"
#define USBUSBNW62X_COMBO_FW_NAME "nxp/usbusbnw62x_combo.bin"
#define USBNW62X_DEFAULT_WLAN_FW_NAME "nxp/usbnw62x_wlan.bin"
#endif /* USBNW62X */
/** urb context */
typedef struct _urb_context {
/** Pointer to moal_handle structure */
moal_handle *handle;
/** Pointer to mlan buffer */
mlan_buffer *pmbuf;
/** URB */
struct urb *urb;
/** EP */
t_u8 ep;
} urb_context;
/** USB card description structure*/
struct usb_card_rec {
/** USB device */
struct usb_device *udev;
/** MOAL handle */
moal_handle *phandle;
/** USB interface */
struct usb_interface *intf;
/** Rx command endpoint type */
int rx_cmd_ep_type;
/** Rx command interval for INTR type */
t_u8 rx_cmd_interval;
/** Rx data endpoint address */
t_u8 rx_cmd_ep;
/** Rx cmd contxt */
urb_context rx_cmd;
/** Rx command URB pending count */
atomic_t rx_cmd_urb_pending;
/** Rx data context list */
urb_context rx_data_list[MVUSB_RX_DATA_URB];
/** Flag to indicate boot state */
t_u8 boot_state;
/** Rx data endpoint address */
t_u8 rx_data_ep;
/** Rx data URB pending count */
atomic_t rx_data_urb_pending;
/** Tx data endpoint address */
t_u8 tx_data_ep;
/** Tx command endpoint type */
int tx_cmd_ep_type;
/** Tx command interval for INTR type */
t_u8 tx_cmd_interval;
/** Tx command endpoint address */
t_u8 tx_cmd_ep;
/** Tx data URB pending count */
atomic_t tx_data_urb_pending;
/** Tx command URB pending count */
atomic_t tx_cmd_urb_pending;
/** Tx data endpoint max pkt size */
int tx_data_maxpktsize;
/** Tx cmd endpoint max pkt size */
int tx_cmd_maxpktsize;
/** Pre-allocated urb for command */
urb_context tx_cmd;
/** Index to point to next data urb to use */
int tx_data_ix;
/** Pre-allocated urb for data */
urb_context tx_data_list[MVUSB_TX_HIGH_WMARK];
usb_aggr_ctrl_cfg tx_aggr_ctrl;
usb_aggr_ctrl_cfg rx_deaggr_ctrl;
t_u8 resubmit_urbs;
/** USB card type */
t_u16 card_type;
t_u8 second_mac;
};
void woal_kill_urbs(moal_handle *handle);
void woal_resubmit_urbs(moal_handle *handle);
mlan_status woal_write_data_async(moal_handle *handle, mlan_buffer *pmbuf,
t_u8 ep);
mlan_status woal_usb_submit_rx_data_urbs(moal_handle *handle);
mlan_status woal_usb_rx_init(moal_handle *handle);
mlan_status woal_usb_tx_init(moal_handle *handle);
mlan_status woal_usb_aggr_init(moal_handle *handle);
void woal_submit_rx_urb(moal_handle *handle, t_u8 ep);
void woal_usb_bus_unregister(void);
mlan_status woal_usb_bus_register(void);
void woal_usb_free(struct usb_card_rec *cardp);
#endif /*_MOAL_USB_H */