mwifiex/mxm_wifiex/wlan_src/Makefile

679 lines
14 KiB
Makefile
Raw Normal View History

# File: Makefile
#
# Copyright 2008-2022 NXP
#
# This software file (the File) is distributed by NXP
# under the terms of the GNU General Public License Version 2, June 1991
# (the License). You may use, redistribute and/or modify the File in
# accordance with the terms and conditions of the License, a copy of which
# is available by writing to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
# worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
#
# THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
# IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
# ARE EXPRESSLY DISCLAIMED. The License provides additional details about
# this warranty disclaimer.
#
CONFIG_COMPATDIR=n
ifeq ($(CONFIG_COMPATDIR), y)
COMPATDIR=/lib/modules/$(KERNELVERSION_X86)/build/compat-wireless-3.2-rc1-1/include
CC ?= $(CROSS_COMPILE)gcc -I$(COMPATDIR)
else
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
CC ?= $(CROSS_COMPILE)gcc -I$(COMPATDIR)
endif
LD ?= $(CROSS_COMPILE)ld
BACKUP= /root/backup
YMD= `date +%Y%m%d%H%M`
#############################################################################
# Configuration Options
#############################################################################
# Multi-chipsets
CONFIG_SD8887=n
CONFIG_SD8897=n
CONFIG_USB8897=n
CONFIG_PCIE8897=n
CONFIG_SD8977=n
CONFIG_SD8978=y
CONFIG_USB8978=n
CONFIG_SD8997=y
CONFIG_USB8997=n
CONFIG_PCIE8997=y
CONFIG_SD8987=y
CONFIG_SD9097=n
CONFIG_SD9177=y
CONFIG_SD8801=y
CONFIG_USB8801=n
CONFIG_USB9097=n
CONFIG_PCIE9097=n
CONFIG_SD9098=y
CONFIG_USB9098=n
CONFIG_PCIE9098=y
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
CONFIG_SDNW62X=n
CONFIG_PCIENW62X=n
CONFIG_USBNW62X=n
# Debug Option
# DEBUG LEVEL n/1/2:
# n: NO DEBUG
# 1: Only PRINTM(MMSG,...), PRINTM(MFATAL,...), ...
# 2: All PRINTM()
CONFIG_DEBUG=1
# Enable STA mode support
CONFIG_STA_SUPPORT=y
# Enable uAP mode support
CONFIG_UAP_SUPPORT=y
# Enable WIFIDIRECT support
CONFIG_WIFI_DIRECT_SUPPORT=y
# Re-association in driver
CONFIG_REASSOCIATION=y
# Manufacturing firmware support
CONFIG_MFG_CMD_SUPPORT=y
# OpenWrt support
CONFIG_OPENWRT_SUPPORT=n
# Big-endian platform
CONFIG_BIG_ENDIAN=n
ifeq ($(CONFIG_DRV_EMBEDDED_SUPPLICANT), y)
CONFIG_EMBEDDED_SUPP_AUTH=y
else
ifeq ($(CONFIG_DRV_EMBEDDED_AUTHENTICATOR), y)
CONFIG_EMBEDDED_SUPP_AUTH=y
endif
endif
#ifdef SDIO_MMC
# SDIO suspend/resume
CONFIG_SDIO_SUSPEND_RESUME=y
#endif
# DFS testing support
CONFIG_DFS_TESTING_SUPPORT=y
# Use static link for app build
export CONFIG_STATIC_LINK=y
CONFIG_ANDROID_KERNEL=n
#32bit app over 64bit kernel support
CONFIG_USERSPACE_32BIT_OVER_KERNEL_64BIT=n
#############################################################################
# Select Platform Tools
#############################################################################
MODEXT = ko
ccflags-y += -I$(PWD)/mlan
ccflags-y += -DLINUX
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
ARCH ?= arm64
CONFIG_IMX_SUPPORT=y
ifeq ($(CONFIG_IMX_SUPPORT),y)
ccflags-y += -DIMX_SUPPORT
ifneq ($(ANDROID_PRODUCT_OUT),)
ccflags-y += -DIMX_ANDROID
endif
endif
KERNELDIR ?= /usr/src/arm/linux_5_10_y_kernel/linux-nxp
CROSS_COMPILE ?= /opt/fsl-imx-internal-xwayland/5.10-gatesgarth/sysroots/x86_64-pokysdk-linux/usr/bin/aarch64-poky-linux/aarch64-poky-linux-
LD += -S
BINDIR = ../bin_wlan
APPDIR= $(shell if test -d "mapp"; then echo mapp; fi)
#############################################################################
# Compiler Flags
#############################################################################
ccflags-y += -I$(KERNELDIR)/include
ccflags-y += -DFPNUM='"92"'
ifeq ($(CONFIG_DEBUG),1)
ccflags-y += -DDEBUG_LEVEL1
endif
ifeq ($(CONFIG_DEBUG),2)
ccflags-y += -DDEBUG_LEVEL1
ccflags-y += -DDEBUG_LEVEL2
DBG= -dbg
endif
ifeq ($(CONFIG_64BIT), y)
ccflags-y += -DMLAN_64BIT
endif
ifeq ($(CONFIG_STA_SUPPORT),y)
ccflags-y += -DSTA_SUPPORT
ifeq ($(CONFIG_REASSOCIATION),y)
ccflags-y += -DREASSOCIATION
endif
else
CONFIG_WIFI_DIRECT_SUPPORT=n
CONFIG_STA_WEXT=n
CONFIG_STA_CFG80211=n
endif
ifeq ($(CONFIG_UAP_SUPPORT),y)
ccflags-y += -DUAP_SUPPORT
else
CONFIG_WIFI_DIRECT_SUPPORT=n
CONFIG_UAP_WEXT=n
CONFIG_UAP_CFG80211=n
endif
ifeq ($(CONFIG_WIFI_DIRECT_SUPPORT),y)
ccflags-y += -DWIFI_DIRECT_SUPPORT
endif
ifeq ($(CONFIG_MFG_CMD_SUPPORT),y)
ccflags-y += -DMFG_CMD_SUPPORT
endif
ifeq ($(CONFIG_BIG_ENDIAN),y)
ccflags-y += -DBIG_ENDIAN_SUPPORT
endif
ifeq ($(CONFIG_USERSPACE_32BIT_OVER_KERNEL_64BIT),y)
ccflags-y += -DUSERSPACE_32BIT_OVER_KERNEL_64BIT
endif
#ifdef SDIO_MMC
ifeq ($(CONFIG_SDIO_SUSPEND_RESUME),y)
ccflags-y += -DSDIO_SUSPEND_RESUME
endif
#endif
ifeq ($(CONFIG_DFS_TESTING_SUPPORT),y)
ccflags-y += -DDFS_TESTING_SUPPORT
endif
ifeq ($(CONFIG_ANDROID_KERNEL), y)
ccflags-y += -DANDROID_KERNEL
endif
ifeq ($(CONFIG_OPENWRT_SUPPORT), y)
ccflags-y += -DOPENWRT
endif
ifeq ($(CONFIG_T50), y)
ccflags-y += -DT50
ccflags-y += -DT40
ccflags-y += -DT3T
endif
ifeq ($(CONFIG_SD8887),y)
CONFIG_SDIO=y
ccflags-y += -DSD8887
endif
ifeq ($(CONFIG_SD8897),y)
CONFIG_SDIO=y
ccflags-y += -DSD8897
endif
ifeq ($(CONFIG_SD8977),y)
CONFIG_SDIO=y
ccflags-y += -DSD8977
endif
ifeq ($(CONFIG_SD8978),y)
CONFIG_SDIO=y
ccflags-y += -DSD8978
endif
ifeq ($(CONFIG_SD8997),y)
CONFIG_SDIO=y
ccflags-y += -DSD8997
endif
ifeq ($(CONFIG_SD8987),y)
CONFIG_SDIO=y
ccflags-y += -DSD8987
endif
ifeq ($(CONFIG_SD9097),y)
CONFIG_SDIO=y
ccflags-y += -DSD9097
endif
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
ifeq ($(CONFIG_SDNW62X),y)
CONFIG_SDIO=y
ccflags-y += -DSDNW62X
endif
ifeq ($(CONFIG_SD9177),y)
CONFIG_SDIO=y
ccflags-y += -DSD9177
endif
ifeq ($(CONFIG_SD8801),y)
CONFIG_SDIO=y
ccflags-y += -DSD8801
endif
ifeq ($(CONFIG_SD9098),y)
CONFIG_SDIO=y
ccflags-y += -DSD9098
endif
ifeq ($(CONFIG_USB8801),y)
CONFIG_MUSB=y
ccflags-y += -DUSB8801
endif
ifeq ($(CONFIG_USB8897),y)
CONFIG_MUSB=y
ccflags-y += -DUSB8897
endif
ifeq ($(CONFIG_USB8997),y)
CONFIG_MUSB=y
ccflags-y += -DUSB8997
endif
ifeq ($(CONFIG_USB8978),y)
CONFIG_MUSB=y
ccflags-y += -DUSB8978
endif
ifeq ($(CONFIG_USB9097),y)
CONFIG_MUSB=y
ccflags-y += -DUSB9097
endif
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
ifeq ($(CONFIG_USBNW62X),y)
CONFIG_MUSB=y
ccflags-y += -DUSBNW62X
endif
ifeq ($(CONFIG_USB9098),y)
CONFIG_MUSB=y
ccflags-y += -DUSB9098
endif
ifeq ($(CONFIG_PCIE8897),y)
CONFIG_PCIE=y
ccflags-y += -DPCIE8897
endif
ifeq ($(CONFIG_PCIE8997),y)
CONFIG_PCIE=y
ccflags-y += -DPCIE8997
endif
ifeq ($(CONFIG_PCIE9097),y)
CONFIG_PCIE=y
ccflags-y += -DPCIE9097
endif
ifeq ($(CONFIG_PCIE9098),y)
CONFIG_PCIE=y
ccflags-y += -DPCIE9098
endif
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
ifeq ($(CONFIG_PCIENW62X),y)
CONFIG_PCIE=y
ccflags-y += -DPCIENW62X
endif
ifeq ($(CONFIG_SDIO),y)
ccflags-y += -DSDIO
ccflags-y += -DSDIO_MMC
endif
ifeq ($(CONFIG_MUSB),y)
ccflags-y += -DUSB
endif
ifeq ($(CONFIG_PCIE),y)
ccflags-y += -DPCIE
endif
ifeq ($(CONFIG_MAC80211_SUPPORT),y)
ccflags-y += -DMAC80211_SUPPORT
endif
ifeq ($(CONFIG_MAC80211_SUPPORT_UAP),y)
ccflags-y += -DMAC80211_SUPPORT_UAP
endif
ifeq ($(CONFIG_MAC80211_SUPPORT_MESH),y)
ccflags-y += -DMAC80211_SUPPORT_MESH
endif
# add -Wno-packed-bitfield-compat when GCC version greater than 4.4
GCC_VERSION := $(shell echo `gcc -dumpversion | cut -f1-2 -d.` \>= 4.4 | sed -e 's/\./*100+/g' | bc )
ifeq ($(GCC_VERSION),1)
ccflags-y += -Wno-packed-bitfield-compat
endif
WimpGCC_VERSION := $(shell echo `gcc -dumpversion | cut -f1 -d.`| bc )
ifeq ($(shell test $(WimpGCC_VERSION) -ge 7; echo $$?),0)
ccflags-y += -Wimplicit-fallthrough=3
endif
#ccflags-y += -Wunused-but-set-variable
#ccflags-y += -Wmissing-prototypes
#ccflags-y += -Wold-style-definition
#ccflags-y += -Wtype-limits
#ccflags-y += -Wsuggest-attribute=format
#ccflags-y += -Wmissing-include-dirs
#ccflags-y += -Wshadow
#ccflags-y += -Wsign-compare
#ccflags-y += -Wunused-macros
#ccflags-y += -Wmissing-field-initializers
#ccflags-y += -Wstringop-truncation
#ccflags-y += -Wmisleading-indentation
#ccflags-y += -Wunused-const-variable
mxm_wifiex: avoid the array-bounds build warnings on L5.17 When build the wifi driver based on L5.17 kernel, we may meet the following build warnings. Add Wno-array-bounds cc-flags to avoid it. /work/mwifiex/mxm_wifiex/wlan_src/mlinux/moal_sta_cfg80211.c: In function ‘woal_host_mlme_disconnect’: /work/mwifiex/mxm_wifiex/wlan_src/mlinux/moal_sta_cfg80211.c:9127:13: warning: array subscript ‘struct ieee80211_mgmt[0]’ is partly outside array bounds of ‘t_u8[26]’ {aka ‘unsigned char[26]’} [-Warray-bounds] 9127 | mgmt->frame_control = (__force __le16)IEEE80211_STYPE_DEAUTH; | ^~ /work/mwifiex/mxm_wifiex/wlan_src/mlinux/moal_sta_cfg80211.c:9123:14: note: while referencing ‘frame_buf’ 9123 | t_u8 frame_buf[26]; | ^~~~~~~~~ /work/mwifiex/mxm_wifiex/wlan_src/mlinux/moal_sta_cfg80211.c:9128:13: warning: array subscript ‘struct ieee80211_mgmt[0]’ is partly outside array bounds of ‘t_u8[26]’ {aka ‘unsigned char[26]’} [-Warray-bounds] 9128 | mgmt->duration = 0; | ^~ /work/mwifiex/mxm_wifiex/wlan_src/mlinux/moal_sta_cfg80211.c:9123:14: note: while referencing ‘frame_buf’ 9123 | t_u8 frame_buf[26]; | ^~~~~~~~~ /work/mwifiex/mxm_wifiex/wlan_src/mlinux/moal_sta_cfg80211.c:9129:13: warning: array subscript ‘struct ieee80211_mgmt[0]’ is partly outside array bounds of ‘t_u8[26]’ {aka ‘unsigned char[26]’} [-Warray-bounds] 9129 | mgmt->seq_ctrl = 0; | ^~ /work/mwifiex/mxm_wifiex/wlan_src/mlinux/moal_sta_cfg80211.c:9123:14: note: while referencing ‘frame_buf’ 9123 | t_u8 frame_buf[26]; | ^~~~~~~~~ /work/mwifiex/mxm_wifiex/wlan_src/mlinux/moal_sta_cfg80211.c:9130:13: warning: array subscript ‘struct ieee80211_mgmt[0]’ is partly outside array bounds of ‘t_u8[26]’ {aka ‘unsigned char[26]’} [-Warray-bounds] 9130 | mgmt->u.deauth.reason_code = (__force __le16)reason_code; | ^~ /work/mwifiex/mxm_wifiex/wlan_src/mlinux/moal_sta_cfg80211.c:9123:14: note: while referencing ‘frame_buf’ 9123 | t_u8 frame_buf[26]; | ^~~~~~~~~ Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Approved-by: Tian Yang <yang.tian@nxp.com>
2022-04-11 04:10:17 +00:00
ccflags-y += -Wno-array-bounds
#############################################################################
# Make Targets
#############################################################################
ifneq ($(KERNELRELEASE),)
ifeq ($(CONFIG_WIRELESS_EXT),y)
ifeq ($(CONFIG_WEXT_PRIV),y)
# Enable WEXT for STA
CONFIG_STA_WEXT=y
# Enable WEXT for uAP
CONFIG_UAP_WEXT=y
else
# Disable WEXT for STA
CONFIG_STA_WEXT=n
# Disable WEXT for uAP
CONFIG_UAP_WEXT=n
endif
endif
# Enable CFG80211 for STA
ifeq ($(CONFIG_CFG80211),y)
CONFIG_STA_CFG80211=y
else
ifeq ($(CONFIG_CFG80211),m)
CONFIG_STA_CFG80211=y
else
CONFIG_STA_CFG80211=n
endif
endif
# OpenWrt
ifeq ($(CONFIG_OPENWRT_SUPPORT), y)
ifeq ($(CPTCFG_CFG80211),y)
CONFIG_STA_CFG80211=y
else
ifeq ($(CPTCFG_CFG80211),m)
CONFIG_STA_CFG80211=y
else
CONFIG_STA_CFG80211=n
endif
endif
endif
# Enable CFG80211 for uAP
ifeq ($(CONFIG_CFG80211),y)
CONFIG_UAP_CFG80211=y
else
ifeq ($(CONFIG_CFG80211),m)
CONFIG_UAP_CFG80211=y
else
CONFIG_UAP_CFG80211=n
endif
endif
# OpenWrt
ifeq ($(CONFIG_OPENWRT_SUPPORT), y)
ifeq ($(CPTCFG_CFG80211),y)
CONFIG_STA_CFG80211=y
else
ifeq ($(CPTCFG_CFG80211),m)
CONFIG_STA_CFG80211=y
else
CONFIG_STA_CFG80211=n
endif
endif
endif
ifneq ($(CONFIG_STA_SUPPORT),y)
CONFIG_WIFI_DIRECT_SUPPORT=n
CONFIG_STA_WEXT=n
CONFIG_STA_CFG80211=n
endif
ifneq ($(CONFIG_UAP_SUPPORT),y)
CONFIG_WIFI_DIRECT_SUPPORT=n
CONFIG_UAP_WEXT=n
CONFIG_UAP_CFG80211=n
endif
ifeq ($(CONFIG_STA_SUPPORT),y)
ifeq ($(CONFIG_STA_WEXT),y)
ccflags-y += -DSTA_WEXT
endif
ifeq ($(CONFIG_STA_CFG80211),y)
ccflags-y += -DSTA_CFG80211
endif
endif
ifeq ($(CONFIG_UAP_SUPPORT),y)
ifeq ($(CONFIG_UAP_WEXT),y)
ccflags-y += -DUAP_WEXT
endif
ifeq ($(CONFIG_UAP_CFG80211),y)
ccflags-y += -DUAP_CFG80211
endif
endif
print:
ifeq ($(CONFIG_STA_SUPPORT),y)
ifeq ($(CONFIG_STA_WEXT),n)
ifeq ($(CONFIG_STA_CFG80211),n)
@echo "Can not build STA without WEXT or CFG80211"
exit 2
endif
endif
endif
ifeq ($(CONFIG_UAP_SUPPORT),y)
ifeq ($(CONFIG_UAP_WEXT),n)
ifeq ($(CONFIG_UAP_CFG80211),n)
@echo "Can not build UAP without WEXT or CFG80211"
exit 2
endif
endif
endif
MOALOBJS = mlinux/moal_main.o \
mlinux/moal_ioctl.o \
mlinux/moal_shim.o \
mlinux/moal_eth_ioctl.o \
mlinux/moal_init.o
MLANOBJS = mlan/mlan_shim.o mlan/mlan_init.o \
mlan/mlan_txrx.o \
mlan/mlan_cmdevt.o mlan/mlan_misc.o \
mlan/mlan_cfp.o \
mlan/mlan_module.o
MLANOBJS += mlan/mlan_wmm.o
ifeq ($(CONFIG_MUSB),y)
MLANOBJS += mlan/mlan_usb.o
endif
ifeq ($(CONFIG_SDIO),y)
MLANOBJS += mlan/mlan_sdio.o
endif
ifeq ($(CONFIG_PCIE),y)
MLANOBJS += mlan/mlan_pcie.o
endif
MLANOBJS += mlan/mlan_11n_aggr.o
MLANOBJS += mlan/mlan_11n_rxreorder.o
MLANOBJS += mlan/mlan_11n.o
MLANOBJS += mlan/mlan_11ac.o
MLANOBJS += mlan/mlan_11ax.o
MLANOBJS += mlan/mlan_11d.o
MLANOBJS += mlan/mlan_11h.o
ifeq ($(CONFIG_STA_SUPPORT),y)
MLANOBJS += mlan/mlan_meas.o
MLANOBJS += mlan/mlan_scan.o \
mlan/mlan_sta_ioctl.o \
mlan/mlan_sta_rx.o \
mlan/mlan_sta_tx.o \
mlan/mlan_sta_event.o \
mlan/mlan_sta_cmd.o \
mlan/mlan_sta_cmdresp.o \
mlan/mlan_join.o
ifeq ($(CONFIG_STA_WEXT),y)
MOALOBJS += mlinux/moal_priv.o \
mlinux/moal_wext.o
endif
endif
ifeq ($(CONFIG_UAP_SUPPORT),y)
MLANOBJS += mlan/mlan_uap_ioctl.o
MLANOBJS += mlan/mlan_uap_cmdevent.o
MLANOBJS += mlan/mlan_uap_txrx.o
MOALOBJS += mlinux/moal_uap.o
ifeq ($(CONFIG_UAP_WEXT),y)
MOALOBJS += mlinux/moal_uap_priv.o
MOALOBJS += mlinux/moal_uap_wext.o
endif
endif
ifeq ($(CONFIG_STA_CFG80211),y)
MOALOBJS += mlinux/moal_cfg80211.o
MOALOBJS += mlinux/moal_cfg80211_util.o
MOALOBJS += mlinux/moal_sta_cfg80211.o
endif
ifeq ($(CONFIG_UAP_CFG80211),y)
MOALOBJS += mlinux/moal_cfg80211.o
MOALOBJS += mlinux/moal_cfg80211_util.o
MOALOBJS += mlinux/moal_uap_cfg80211.o
endif
ifdef CONFIG_PROC_FS
MOALOBJS += mlinux/moal_proc.o
MOALOBJS += mlinux/moal_debug.o
endif
ifeq ($(CONFIG_MAC80211_SUPPORT),y)
MOALOBJS += mlinux/moal_mac80211.o
MLANOBJS += mlan/mlan_mac80211.o
endif
obj-m := mlan.o
mlan-objs := $(MLANOBJS)
ifeq ($(CONFIG_MUSB),y)
MOALOBJS += mlinux/moal_usb.o
endif
ifeq ($(CONFIG_SDIO),y)
MOALOBJS += mlinux/moal_sdio_mmc.o
endif
ifeq ($(CONFIG_PCIE),y)
MOALOBJS += mlinux/moal_pcie.o
endif
obj-m += moal.o
moal-objs := $(MOALOBJS)
# Otherwise we were called directly from the command line; invoke the kernel build system.
else
default:
$(MAKE) -C $(KERNELDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules
endif
###############################################################
export CC LD ccflags-y KERNELDIR
.PHONY: mapp/mlanutl clean distclean
@echo "Finished Making NXP Wlan Linux Driver"
mapp/mlanutl:
$(MAKE) -C $@
echo:
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
appsbuild:
@if [ ! -d $(BINDIR) ]; then \
mkdir $(BINDIR); \
fi
cp -f README_MLAN $(BINDIR)
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
ifneq ($(APPDIR),)
cp -rf mapp/mlanconfig/config $(BINDIR)
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
$(MAKE) -C mapp/mlanutl $@ INSTALLDIR=$(BINDIR)
endif
build: echo default
@if [ ! -d $(BINDIR) ]; then \
mkdir $(BINDIR); \
fi
cp -f mlan.$(MODEXT) $(BINDIR)/mlan$(DBG).$(MODEXT)
cp -f moal.$(MODEXT) $(BINDIR)/moal$(DBG).$(MODEXT)
cp -rpf script/load $(BINDIR)/
cp -rpf script/unload $(BINDIR)/
cp -f README_MLAN $(BINDIR)
ifneq ($(APPDIR),)
cp -rf mapp/mlanconfig/config $(BINDIR)
$(MAKE) -C mapp/mlanutl $@ INSTALLDIR=$(BINDIR)
endif
clean:
-find . -name "*.o" -exec rm {} \;
-find . -name "*.ko" -exec rm {} \;
-find . -name ".*.cmd" -exec rm {} \;
-find . -name "*.mod.c" -exec rm {} \;
-find . -name "Module.symvers" -exec rm {} \;
-find . -name "Module.markers" -exec rm {} \;
-find . -name "modules.order" -exec rm {} \;
-find . -name ".*.dwo" -exec rm {} \;
-find . -name "*dwo" -exec rm {} \;
-rm -rf .tmp_versions
ifneq ($(APPDIR),)
$(MAKE) -C mapp/mlanutl $@
endif
#ifdef SDIO
#endif // SDIO
install: default
cp -f mlan.$(MODEXT) $(INSTALLDIR)/mlan$(DBG).$(MODEXT)
cp -f moal.$(MODEXT) $(INSTALLDIR)/moal$(DBG).$(MODEXT)
echo $(INSTALLDIR)
echo "MX Driver Installed"
distclean:
-find . -name "*.o" -exec rm {} \;
-find . -name "*.orig" -exec rm {} \;
-find . -name "*.swp" -exec rm {} \;
-find . -name "*.*~" -exec rm {} \;
-find . -name "*~" -exec rm {} \;
-find . -name "*.d" -exec rm {} \;
-find . -name "*.a" -exec rm {} \;
-find . -name "tags" -exec rm {} \;
-find . -name ".*" -exec rm -rf 2> /dev/null \;
-find . -name "*.ko" -exec rm {} \;
-find . -name ".*.cmd" -exec rm {} \;
-find . -name "*.mod.c" -exec rm {} \;
-find . -name ".*.dwo" -exec rm {} \;
-find . -name "*dwo" -exec rm {} \;
-rm -rf .tmp_versions
ifneq ($(APPDIR),)
$(MAKE) -C mapp/mlanutl $@
endif
# End of file