mwifiex/mxm_wifiex/wlan_src/mlinux/moal_sdio.h

205 lines
6.8 KiB
C
Raw Normal View History

/** @file moal_sdio.h
*
* @brief This file contains definitions for SDIO interface.
* driver.
*
*
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
* Copyright 2008-2022 NXP
*
* This software file (the File) is distributed by NXP
* under the terms of the GNU General Public License Version 2, June 1991
* (the License). You may use, redistribute and/or modify the File in
* accordance with the terms and conditions of the License, a copy of which
* is available by writing to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
* worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
*
* THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
* this warranty disclaimer.
*
*/
/****************************************************
Change log:
****************************************************/
#ifndef _MOAL_SDIO_H
#define _MOAL_SDIO_H
#include <linux/mmc/sdio.h>
#include <linux/mmc/sdio_ids.h>
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include "moal_main.h"
#ifndef BLOCK_MODE
/** Block mode */
#define BLOCK_MODE 1
#endif
#ifndef BYTE_MODE
/** Byte Mode */
#define BYTE_MODE 0
#endif
#ifndef FIXED_ADDRESS
/** Fixed address mode */
#define FIXED_ADDRESS 0
#endif
#if defined(SD8977)
#define SD8977_V0 0x0
#define SD8977_V1 0x8
#define SD8977_V2 0x9
#define SD8977_V0_FW_NAME "nxp/sdsd8977_combo.bin"
#define SD8977_V1_FW_NAME "nxp/sdsd8977_combo_v1.bin"
#define SD8977_V2_FW_NAME "nxp/sdsd8977_combo_v2.bin"
#define SD8977_WLAN_V2_FW_NAME "nxp/sd8977_wlan_v2.bin"
#define SD8977_WLAN_V1_FW_NAME "nxp/sd8977_wlan_v1.bin"
#define SD8977_WLAN_V0_FW_NAME "nxp/sd8977_wlan.bin"
#endif /* SD8977_MULTI_FW */
#if defined(SD8887)
/** SD8887 chip revision ID */
#define SD8887_A0 0x0
#define SD8887_A2 0x2
#define SD8887_A0_FW_NAME "nxp/sd8887_uapsta.bin"
#define SD8887_A2_FW_NAME "nxp/sd8887_uapsta_a2.bin"
#define SD8887_WLAN_A2_FW_NAME "nxp/sd8887_wlan_a2.bin"
#define SD8887_WLAN_A0_FW_NAME "nxp/sd8887_wlan.bin"
#endif /* SD8887_MULTI_FW */
#ifdef SD8801
#define SD8801_DEFAULT_WLAN_FW_NAME "nxp/sd8801_uapsta.bin"
#endif /* SD8801 */
/** Default firmware name */
#ifdef SD8887
#define SD8887_DEFAULT_COMBO_FW_NAME "nxp/sd8887_uapsta_a2.bin"
#define SD8887_DEFAULT_WLAN_FW_NAME "nxp/sd8887_wlan_a2.bin"
#endif /* SD8887 */
#ifdef SD8977
#define SD8977_DEFAULT_COMBO_FW_NAME "nxp/sdsd8977_combo_v2.bin"
#define SD8977_DEFAULT_WLAN_FW_NAME "nxp/sd8977_wlan_v2.bin"
#endif /* SD8977 */
#ifdef SD8997
#define SD8997_DEFAULT_COMBO_FW_NAME "nxp/sdsd8997_combo_v4.bin"
#define SDUART8997_DEFAULT_COMBO_FW_NAME "nxp/sduart8997_combo_v4.bin"
#define SDSD8997_DEFAULT_COMBO_FW_NAME "nxp/sdsd8997_combo_v4.bin"
#define SD8997_DEFAULT_WLAN_FW_NAME "nxp/sd8997_wlan_v4.bin"
#endif /* SD8997 */
#ifdef SD8987
#define SD8987_DEFAULT_COMBO_FW_NAME "nxp/sdsd8987_combo.bin"
#define SDUART8987_DEFAULT_COMBO_FW_NAME "nxp/sduart8987_combo.bin"
#define SDSD8987_DEFAULT_COMBO_FW_NAME "nxp/sdsd8987_combo.bin"
#define SD8987_DEFAULT_WLAN_FW_NAME "nxp/sd8987_wlan.bin"
#endif /* SD8987 */
#ifdef SD8897
#define SD8897_DEFAULT_COMBO_FW_NAME "nxp/sdsd8897_uapsta.bin"
#define SD8897_DEFAULT_WLAN_FW_NAME "nxp/sd8897_wlan.bin"
#endif /* SD8897 */
#ifdef SD8978
#define SD8978_DEFAULT_COMBO_FW_NAME "nxp/sdsdiw416_combo.bin"
#define SDUART8978_DEFAULT_COMBO_FW_NAME "nxp/sduartiw416_combo.bin"
#define SDSD8978_DEFAULT_COMBO_FW_NAME "nxp/sdsdiw416_combo.bin"
#define SD8978_DEFAULT_WLAN_FW_NAME "nxp/sdiw416_wlan.bin"
#endif /* SD8978 */
#ifdef SD9098
#define SD9098_Z1Z2 0x00
#define SD9098_A0 0x01
#define SD9098_A1 0x02
#define SD9098_A2 0x03
#define SD9098_DEFAULT_COMBO_FW_NAME "nxp/sdsd9098_combo.bin"
#define SDUART9098_DEFAULT_COMBO_FW_NAME "nxp/sduart9098_combo.bin"
#define SDSD9098_DEFAULT_COMBO_FW_NAME "nxp/sdsd9098_combo.bin"
#define SD9098_DEFAULT_WLAN_FW_NAME "nxp/sd9098_wlan.bin"
#define SDUART9098_COMBO_V1_FW_NAME "nxp/sduart9098_combo_v1.bin"
#define SDSD9098_COMBO_V1_FW_NAME "nxp/sdsd9098_combo_v1.bin"
#define SD9098_WLAN_V1_FW_NAME "nxp/sd9098_wlan_v1.bin"
#endif /* SD9098 */
#ifdef SD9097
#define SD9097_B0 0x01
#define SD9097_B1 0x02
#define SD9097_DEFAULT_COMBO_FW_NAME "nxp/sdsdiw620_combo_v1.bin"
#define SD9097_DEFAULT_WLAN_FW_NAME "nxp/sdiw620_wlan_v1.bin"
#define SDUART9097_COMBO_V1_FW_NAME "nxp/sduartiw620_combo_v1.bin"
#define SDSD9097_COMBO_V1_FW_NAME "nxp/sdsdiw620_combo_v1.bin"
#define SD9097_WLAN_V1_FW_NAME "nxp/sdiw620_wlan_v1.bin"
#endif /* SD9097 */
#ifdef SDIW624
#define SDIW624_DEFAULT_COMBO_FW_NAME "nxp/sdsdiw624_combo.bin"
#define SDUARTIW624_COMBO_FW_NAME "nxp/sduartiw624_combo.bin"
#define SDUARTSPIIW624_COMBO_FW_NAME "nxp/sduartspiiw624_combo.bin"
#define SDUARTUARTIW624_COMBO_FW_NAME "nxp/sduartuartiw624_combo.bin"
#define SDSDIW624_COMBO_FW_NAME "sdsdiw624_combo.bin"
#define SDIW624_DEFAULT_WLAN_FW_NAME "nxp/sdiw624_wlan.bin"
#endif /* SDIW624 */
#ifdef SD9177
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
#define SD9177_A0 0x00
#define SD9177_A1 0x01
#define SD9177_DEFAULT_COMBO_FW_NAME "nxp/sdsd_nw61x.bin"
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
#define SD9177_DEFAULT_COMBO_V1_FW_NAME "nxp/sduart_nw61x_v1.bin"
#define SDUART9177_DEFAULT_COMBO_FW_NAME "nxp/sduart_nw61x.bin"
#define SDSD9177_DEFAULT_COMBO_FW_NAME "nxp/sdsd_nw61x.bin"
#define SD9177_DEFAULT_WLAN_FW_NAME "nxp/sd_w61x.bin"
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
#define SDUART9177_DEFAULT_COMBO_V1_FW_NAME "nxp/sduart_nw61x_v1.bin"
#define SDSD9177_DEFAULT_COMBO_V1_FW_NAME "nxp/sdsd_nw61x_v1.bin"
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
#define SD9177_DEFAULT_WLAN_V1_FW_NAME "nxp/sd_w61x_v1.bin"
#define SDUART9177_DEFAULT_RFTM_COMBO_V1_FW_NAME "nxp/sduart_nw61x_rftm_v1.bin"
#define SDSD9177_DEFAULT_RFTM_COMBO_V1_FW_NAME "nxp/sdsd_nw61x_rftm_v1.bin"
#define SD9177_DEFAULT_RFTM_WLAN_V1_FW_NAME "nxp/sd_w61x_rftm_v1.bin"
#endif /* SD9177 */
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
/********************************************************
Global Functions
********************************************************/
/** Register to bus driver function */
mlan_status woal_sdiommc_bus_register(void);
/** Unregister from bus driver function */
void woal_sdiommc_bus_unregister(void);
int woal_sdio_set_bus_clock(moal_handle *handle, t_u8 option);
#ifdef SDIO_SUSPEND_RESUME
#ifdef MMC_PM_FUNC_SUSPENDED
/** Notify SDIO bus driver that WLAN is suspended */
void woal_wlan_is_suspended(moal_handle *handle);
#endif
/** SDIO Suspend */
int woal_sdio_suspend(struct device *dev);
/** SDIO Resume */
int woal_sdio_resume(struct device *dev);
#endif /* SDIO_SUSPEND_RESUME */
#ifdef SDIO_MMC
/** Structure: SDIO MMC card */
struct sdio_mmc_card {
/** sdio_func structure pointer */
struct sdio_func *func;
/** moal_handle structure pointer */
moal_handle *handle;
/** saved host clock value */
unsigned int host_clock;
};
void woal_sdio_reset_hw(moal_handle *handle);
#endif /* SDIO_MMC */
/** cmd52 read write */
int woal_sdio_read_write_cmd52(moal_handle *handle, int func, int reg, int val);
#endif /* _MOAL_SDIO_H */