mwifiex/mxm_wifiex/wlan_src/mlan/mlan_11n_rxreorder.h

105 lines
4.1 KiB
C
Raw Normal View History

/** @file mlan_11n_rxreorder.h
*
* @brief This file contains related macros, enum, and struct
* of 11n RxReordering functionalities
*
*
mxm_wifiex: update to mxm5x17322 release New Additions/Removals/Improvements: ------------------------------------ 1. WSW-18868: Improve FW download time after suspend/resume cycle 2. WSFD-484: WIFI 6E support 3. WSW-17954: Enable turbo mode command for mlanutl 4. WSW-19363: Add debug prints to WLAN driver regarding WPA_supplicant 5. WSW-19307: Support robust btc related commands [0x00e0] in mlanutl 6. WSW-16429: Disabling of WEP/TKIP on all V16 devices 7. Use CFG80211_VERSION_CODE to control cfg80211 related code 8. Enabled these new commands for mlanutl: min_ba_threshold, stop_su and ed_mac_ctrl_v3 9. WSFD-386: FW and VHAL Implementation for WOWLAN by adding code for MDNS wakeup Driver Bug Fixes: ----------------- 1. WSW-18708: Setting domain info fails for W8801 Murata M.2 Module (2DS) 2. WSW-18541: Debug logs not seen if drvdbg is part of wifi_mod_para.conf 3. WSW-19136: Command 0x107 timeout is seen radomly during connect-disconnect test 4. WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. WSW-17923: 4K Video Stoppage Issue, Wi-Fi throughput drops to lower than 20Mbps without recovery 6. WSW-17925: NO_IR flags are not cleared for ch 12,13 and 14 if country is changed to JP in runtime 7. WCSWREL-251: There is "mlan0: Failed to initialize driver interface" during stress load/unload testing 8. WSW-18431: UAP beacon (in 1x1 mode) not reporting correct values for tx_highest_rate and rx_highest_rate in VhtCap IE 9. WSW-18116: TCP Keep alive packets are not seen after starting cloud keep alive 10. WSW-18690: STAUT is advertising support of MCS-0 to 9 only in HE-IE in Probe Request 11. WCSWREL-266: Fix L5.16 build errors and warnings Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-04-19 06:46:37 +00:00
* Copyright 2008-2021 NXP
*
* This software file (the File) is distributed by NXP
* under the terms of the GNU General Public License Version 2, June 1991
* (the License). You may use, redistribute and/or modify the File in
* accordance with the terms and conditions of the License, a copy of which
* is available by writing to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
* worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
*
* THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
* this warranty disclaimer.
*
*/
/********************************************************
Change log:
11/10/2008: initial version
********************************************************/
#ifndef _MLAN_11N_RXREORDER_H_
#define _MLAN_11N_RXREORDER_H_
/** Max value a TID can take = 2^12 = 4096 */
#define MAX_TID_VALUE (2 << 11)
/** 2^11 = 2048 */
#define TWOPOW11 (2 << 10)
/** Tid Mask used for extracting TID from BlockAckParamSet */
#define BLOCKACKPARAM_TID_MASK 0x3C
/** Tid position in BlockAckParamSet */
#define BLOCKACKPARAM_TID_POS 2
/** WinSize Mask used for extracting WinSize from BlockAckParamSet */
#define BLOCKACKPARAM_WINSIZE_MASK 0xffc0
/** WinSize Mask used for extracting WinSize from BlockAckParamSet */
#define BLOCKACKPARAM_AMSDU_SUPP_MASK 0x1
/** WinSize position in BlockAckParamSet */
#define BLOCKACKPARAM_WINSIZE_POS 6
/** Position of TID in DelBA Param set */
#define DELBA_TID_POS 12
/** Position of INITIATOR in DelBA Param set */
#define DELBA_INITIATOR_POS 11
/** Reason code: Requested from peer STA as it does not want to
* use the mechanism */
#define REASON_CODE_STA_DONT_WANT 37
/** Reason code: Requested from peer STA due to timeout*/
#define REASON_CODE_STA_TIMEOUT 39
/** Type: send delba command */
#define TYPE_DELBA_SENT 1
/** Type: recieve delba command */
#define TYPE_DELBA_RECEIVE 2
/** Set Initiator Bit */
#define DELBA_INITIATOR(paramset) (paramset = (paramset | (1 << 11)))
/** Reset Initiator Bit for recipient */
#define DELBA_RECIPIENT(paramset) (paramset = (paramset & ~(1 << 11)))
/** Immediate block ack */
#define IMMEDIATE_BLOCK_ACK 0x2
/** The request has been declined */
#define ADDBA_RSP_STATUS_DECLINED 37
/** ADDBA response status : Reject */
#define ADDBA_RSP_STATUS_REJECT 1
/** ADDBA response status : Accept */
#define ADDBA_RSP_STATUS_ACCEPT 0
/** DEFAULT SEQ NUM */
#define DEFAULT_SEQ_NUM 0xffff
/** Indicate packet has been dropped in FW */
#define RX_PKT_DROPPED_IN_FW 0xffffffff
mlan_status mlan_11n_rxreorder_pkt(void *priv, t_u16 seqNum, t_u16 tid,
t_u8 *ta, t_u8 pkttype, void *payload);
void mlan_11n_delete_bastream_tbl(mlan_private *priv, int tid,
t_u8 *PeerMACAddr, t_u8 type, int initiator,
t_u16 reason_code);
void wlan_11n_ba_stream_timeout(mlan_private *priv,
HostCmd_DS_11N_BATIMEOUT *event);
mlan_status wlan_ret_11n_addba_resp(mlan_private *priv,
HostCmd_DS_COMMAND *resp);
mlan_status wlan_cmd_11n_delba(mlan_private *priv, HostCmd_DS_COMMAND *cmd,
void *pdata_buf);
mlan_status wlan_cmd_11n_addba_rspgen(mlan_private *priv,
HostCmd_DS_COMMAND *cmd, void *pdata_buf);
mlan_status wlan_cmd_11n_addba_req(mlan_private *priv, HostCmd_DS_COMMAND *cmd,
void *pdata_buf);
void wlan_11n_cleanup_reorder_tbl(mlan_private *priv);
RxReorderTbl *wlan_11n_get_rxreorder_tbl(mlan_private *priv, int tid, t_u8 *ta);
void wlan_11n_rxba_sync_event(mlan_private *priv, t_u8 *event_buf, t_u16 len);
void wlan_update_rxreorder_tbl(pmlan_adapter pmadapter, t_u8 flag);
void wlan_flush_rxreorder_tbl(pmlan_adapter pmadapter);
void wlan_coex_ampdu_rxwinsize(pmlan_adapter pmadapter);
/** clean up reorder_tbl */
void wlan_cleanup_reorder_tbl(mlan_private *priv, t_u8 *ta);
#endif /* _MLAN_11N_RXREORDER_H_ */