imx-firmware/nxp/wifi_mod_para.conf
Sherry Sun 87d2442830 FwImage: update firmware to mxm5x17368
Updated firmware:
SDIO-UART W8987 Firmware version 16.92.21.p76
PCIE-UART W8997 Firmware version 16.92.21.p76
SDIO-UART W8997 Firmware version 16.92.21.p76
SDIO-UART IW416 Firmware version 16.92.21.p76
SDIO_UART IW612 Firmware version 18.99.1.p154.18

Unchanged firmware:
SDIO-UART W8801 Firmware version 14.92.36.p178
SDIO-UART W9098 Firmware version 17.92.1.p136.13
PCIE-UART W9098 Firmware version 17.92.1.p136.13

WLAN new Additions/Removals/Improvements:
---------------
1. SD8987/IW416: WiFi Agile Multi-Band
2. SD8987: Monitor Mode
3. SD8987/IW416: uAPSD / PPS
4. SD8987: Packet Coalescing
5. SD8987/IW416: Support Boot Sleep Patch
6. PCIE8997/SD8997/IW416: Enable Wifi Easy Connect (DPP)
7. PCIE8997/SD8997: Wi-Fi Enhanced Open (OWE)
8. PCIE8997/SD8997/IW416: WPA3 embedded
9. PCIE8997/SD8997/IW416: mDNS (Bonjour) Offload - Wi-Fi
10. PCIE8997/SD8997/IW416: IPv6 NS Offload
11. PCIE8997/SD8997/IW416: Auto Reconnect
12. PCIE8997/SD8997: Independent reset via inband
13. PCIE8997/SD8997: Enable Independent Reset via Out-of-Band

WLAN Bug Fixes:
---------------
1. SD8987: WSW-23818: Fixed the DFS channel failure
2. SD8997: WSW-23254: auto_tx Feature fails with seconds interval configuration
3. SD8997: WSW-19809: less TP observed in P2P- 11AC/AN/BGN, TCP/UDP, TX/RX
4. IW612: WSW-23423: WLAN+BT Parallel download and Combo FW download consuming more current compared to BT+WLAN
5. IW612: WSW-21650: False radar detection when IW620 transmitting
6. IW612: WSW-22003: Low throughput was observed in 2.4G-Tx when Netgear AP 20/40 MHz coexistence was enabled

BT/COEX New Additions/Removals/Improvements:
-------------------
1. SD8987/PCIE8997/SD8997: BT/BLE Deepsleep
2. PCIE8997: Wake on BLE
3. IW416: BLE Multi-Adv / Advertisement Extension
4. IW416: LE Long Range

BT/Co-ex Bug Fixes:
-------------------
1. SD8987: WSW-23234: BREDR qualification TCs failure
2. SD8987: WSW-23233: BLE qualification TCs failures
3. SD8987: WSW-21475: Only one headset can hear the voice after establish two esco links during DUAL HFP test
4. SD8987: WSW-23110: Pairing failure when connecting with nRF connect app from mobile phone
5. SD8987: WSW-22242: Sometimes BT firmware is downloaded successfully, but cannot active and WIFI scan command will timeout
6. PCIE8997/SD8997: WSW-19165: New BREDR TCs and failures with TCRL2021-1 and TCRL2021-2
7. PCIE8997/SD8997: WSW-19166: New BLE TCs and failures with TCRL2021-1 and TCRL2021-2
8. PCIE8997/SD8997: WSW-20158: Disconnection with reason 15 during WPA re-keying
9. PCIE8997/SD8997: WSW-21809: Both OPP & HFP links drop when DUT starts OPP-TX transfer
10. IW416: WSW-22293: BluetoothLeAdvertiserTest cases fails during CTS run
11. IW416: WSW-19098: New BREDR TCs and failures with TCRL2021-2, E17535
12. IW416: WSW-19164: New BLE TCs and failures with TCRL2021-2, E17535
13. IW416: WSW-22605: DUT displaying wrong LMP Version i.e 5.0 instead of 5.3
14. IW612: WSW-23431: DUT hangs during execute LL TCs ,hard to continue the Qual testing
15. IW612: WSW-21751: No eSCO connection complete event after remote device reject eSCO connection

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
2022-12-23 15:55:41 +08:00

235 lines
4.2 KiB
Text

# Not matter how many spaces or tabs are inserted in a line,
# components and ending format must be exactly same as given
# example:
#
# <card_type>[_<block_id>] = {
# key=value
# }
#
# card_type : 8XXX (mandatory)
# block_id : configuration block id (optional )
# key : module parameter name
# value : value for module parameter
# for string value, no need to add ""
#
# card_type supported: 8887/8897/8997/8977/8987/9098
# block_id: support same chipset with
# different module parameter.
# For example to support mutiple SD8997 cards, usr can
# specify the configuration block id number [0 - 9], if not
# specified, it is taken as 0 by default.
#
# debug related module parameters could not be set via module
# configure file, ex. drvdbg could not be set in this file
#
# line started with "#" will be ignored
# refer to the USB8997_1 for parameters that could be set in
# this configuration file, and set the corresponding value
# according to your real needs
SD8997 = {
cfg80211_wext=0xf
max_vir_bss=1
cal_data_cfg=none
ps_mode=1
auto_ds=1
host_mlme=1
fw_name=nxp/sdiouart8997_combo_v4.bin
}
#SD8997_1 = {
# cfg80211_wext=0xf
# wfd_name=wfd0
# max_vir_bss=1
# cal_data_cfg=nxp/WlanCalData_ext_8997_QFN_TB.conf
# drv_mode=5
#}
#SD8887 = {
# cfg80211_wext=0xf
# wfd_name=p2p
# max_vir_bss=1
# cal_data_cfg=nxp/WlanCalData_ext_8997_QFN_TB.conf
# drv_mode=7
#}
#SD8897 = {
# cfg80211_wext=0xf
# wfd_name=p2p
# max_vir_bss=1
# cal_data_cfg=nxp/WlanCalData_ext_8997_QFN_TB.conf
# drv_mode=7
#}
#SD8977 = {
# cfg80211_wext=0xf
# wfd_name=p2p
# max_vir_bss=1
# cal_data_cfg=nxp/WlanCalData_ext_8997_QFN_TB.conf
# drv_mode=7
#}
SD8987 = {
cfg80211_wext=0xf
max_vir_bss=1
cal_data_cfg=none
ps_mode=1
auto_ds=1
host_mlme=1
fw_name=nxp/sdiouart8987_combo_v0.bin
}
#USB8997 = {
# cfg80211_wext=0xf
# max_vir_bss=1
# cal_data_cfg=nxp/WlanCalData_ext_8997_QFN_TB.conf
# drv_mode=7
#}
PCIE8997 = {
cfg80211_wext=0xf
max_vir_bss=1
cal_data_cfg=none
ps_mode=1
auto_ds=1
host_mlme=1
fw_name=nxp/pcieuart8997_combo_v4.bin
}
PCIE9098_0 = {
cfg80211_wext=0xf
max_vir_bss=1
cal_data_cfg=none
ps_mode=1
auto_ds=1
host_mlme=1
fw_name=nxp/pcieuart9098_combo_v1.bin
}
PCIE9098_1 = {
cfg80211_wext=0xf
max_vir_bss=1
cal_data_cfg=none
ps_mode=1
auto_ds=1
host_mlme=1
fw_name=nxp/pcieuart9098_combo_v1.bin
}
SD9098_0 = {
cfg80211_wext=0xf
max_vir_bss=1
cal_data_cfg=none
ps_mode=1
auto_ds=1
host_mlme=1
fw_name=nxp/sdiouart9098_combo_v1.bin
}
SD9098_1 = {
cfg80211_wext=0xf
max_vir_bss=1
cal_data_cfg=none
ps_mode=1
auto_ds=1
host_mlme=1
fw_name=nxp/sdiouart9098_combo_v1.bin
}
SDIW416 = {
cfg80211_wext=0xf
max_vir_bss=1
cal_data_cfg=none
ps_mode=1
auto_ds=1
host_mlme=1
fw_name=nxp/sdiouartiw416_combo_v0.bin
}
SD8801 = {
cfg80211_wext=0xf
max_vir_bss=1
cal_data_cfg=none
ps_mode=1
auto_ds=1
host_mlme=1
fw_name=nxp/sd8801_uapsta.bin
}
SDIW612 = {
cfg80211_wext=0xf
max_vir_bss=1
cal_data_cfg=none
ps_mode=1
auto_ds=1
host_mlme=1
fw_name=nxp/sduart_nw61x_v1.bin.se
}
#USB8997 = {
# hw_test=0
# fw_name="nxp/usbusb8997_combo_v4.bin"
# req_fw_nowait=1
# fw_reload=3
# fw_serial=1
# mac_addr=00:50:43:22:1e:3d
# mfg_mode=0
# drv_mode=0x5
# max_sta_bss=1
# sta_name=wlan
# max_uap_bss=1
# uap_name=uap
# wfd_name=p2p
# max_vir_bss=1
# max_mpl_bss=1
# nan_name=nan
# max_nan_bss=1
# max_11p_bss=1
# auto_ds=0
# ps_mode=1
# max_tx_buf=4096
# intmode=0
# gpiopin=0
# pm_keep_power=0
# shutdown_hs=1
# cfg_11d=1
# start_11ai_scan=0
# oob_mode=0
# sdio_pd=1
# cal_data_cfg=nxp/WlanCalData_ext_8997_QFN_TB.conf
# txpwrtlimit_cfg=nxp/txpwr_limit.conf
# cntry_txpwrt=0
# init_hostcmd_cfg=nxp/init_hostcmd_cfg.conf
# minicard_pwrup=0
# cfg80211_wext=0xf
# skip_fwdnld=0
# wq_sched_prio=0
# wq_sched_policy=0
# rx_work=1
# aggrctrl=1
# usb_aggr=1
# pcie_int_mode=1
# low_power_mode_enable=1
# wakelock_timeout=10
# dev_cap_mask=0xffffffff
# sdio_rx_aggr=1
# pmic=1
# antcfg=0
# uap_oper_ctrl=0
# hs_wake_interval=400
# indication_gpio=0xff
# disconnect_on_suspend=0
# hs_mimo_switch=1
# indrstcfg=0xffffffff
# fixed_beacon_buffer=0
# GoAgeoutTime=0
# gtk_rekey_offload=1
# multi_dtim=0
# inact_tmo=0
# usb_fw_option=1
# napi=1
# dfs_offload=1
# cfg80211_drcs=1
# drcs_chantime_mode=0
# reg_alpha2=US
#}