FwImage: update firmware to mxm5x17368

Updated firmware:
SDIO-UART W8987 Firmware version 16.92.21.p76
PCIE-UART W8997 Firmware version 16.92.21.p76
SDIO-UART W8997 Firmware version 16.92.21.p76
SDIO-UART IW416 Firmware version 16.92.21.p76
SDIO_UART IW612 Firmware version 18.99.1.p154.18

Unchanged firmware:
SDIO-UART W8801 Firmware version 14.92.36.p178
SDIO-UART W9098 Firmware version 17.92.1.p136.13
PCIE-UART W9098 Firmware version 17.92.1.p136.13

WLAN new Additions/Removals/Improvements:
---------------
1. SD8987/IW416: WiFi Agile Multi-Band
2. SD8987: Monitor Mode
3. SD8987/IW416: uAPSD / PPS
4. SD8987: Packet Coalescing
5. SD8987/IW416: Support Boot Sleep Patch
6. PCIE8997/SD8997/IW416: Enable Wifi Easy Connect (DPP)
7. PCIE8997/SD8997: Wi-Fi Enhanced Open (OWE)
8. PCIE8997/SD8997/IW416: WPA3 embedded
9. PCIE8997/SD8997/IW416: mDNS (Bonjour) Offload - Wi-Fi
10. PCIE8997/SD8997/IW416: IPv6 NS Offload
11. PCIE8997/SD8997/IW416: Auto Reconnect
12. PCIE8997/SD8997: Independent reset via inband
13. PCIE8997/SD8997: Enable Independent Reset via Out-of-Band

WLAN Bug Fixes:
---------------
1. SD8987: WSW-23818: Fixed the DFS channel failure
2. SD8997: WSW-23254: auto_tx Feature fails with seconds interval configuration
3. SD8997: WSW-19809: less TP observed in P2P- 11AC/AN/BGN, TCP/UDP, TX/RX
4. IW612: WSW-23423: WLAN+BT Parallel download and Combo FW download consuming more current compared to BT+WLAN
5. IW612: WSW-21650: False radar detection when IW620 transmitting
6. IW612: WSW-22003: Low throughput was observed in 2.4G-Tx when Netgear AP 20/40 MHz coexistence was enabled

BT/COEX New Additions/Removals/Improvements:
-------------------
1. SD8987/PCIE8997/SD8997: BT/BLE Deepsleep
2. PCIE8997: Wake on BLE
3. IW416: BLE Multi-Adv / Advertisement Extension
4. IW416: LE Long Range

BT/Co-ex Bug Fixes:
-------------------
1. SD8987: WSW-23234: BREDR qualification TCs failure
2. SD8987: WSW-23233: BLE qualification TCs failures
3. SD8987: WSW-21475: Only one headset can hear the voice after establish two esco links during DUAL HFP test
4. SD8987: WSW-23110: Pairing failure when connecting with nRF connect app from mobile phone
5. SD8987: WSW-22242: Sometimes BT firmware is downloaded successfully, but cannot active and WIFI scan command will timeout
6. PCIE8997/SD8997: WSW-19165: New BREDR TCs and failures with TCRL2021-1 and TCRL2021-2
7. PCIE8997/SD8997: WSW-19166: New BLE TCs and failures with TCRL2021-1 and TCRL2021-2
8. PCIE8997/SD8997: WSW-20158: Disconnection with reason 15 during WPA re-keying
9. PCIE8997/SD8997: WSW-21809: Both OPP & HFP links drop when DUT starts OPP-TX transfer
10. IW416: WSW-22293: BluetoothLeAdvertiserTest cases fails during CTS run
11. IW416: WSW-19098: New BREDR TCs and failures with TCRL2021-2, E17535
12. IW416: WSW-19164: New BLE TCs and failures with TCRL2021-2, E17535
13. IW416: WSW-22605: DUT displaying wrong LMP Version i.e 5.0 instead of 5.3
14. IW612: WSW-23431: DUT hangs during execute LL TCs ,hard to continue the Qual testing
15. IW612: WSW-21751: No eSCO connection complete event after remote device reject eSCO connection

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
This commit is contained in:
Sherry Sun 2022-12-20 16:26:50 +08:00
parent 6fa6713672
commit 87d2442830
29 changed files with 1 additions and 670 deletions

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

View file

@ -1,610 +0,0 @@
# File : txpwrlimit_cfg.conf
## Get CFG data for Tx power limitation
txpwrlimit_2g_cfg_get={
CmdCode=0x00fb # do NOT change this line
Action:2=0 # 0 - GET
SubBand:2=0x00 # 0x00 2G subband (2.4G: channel 1-14)
# 0x10 5G subband0 (5G: channel 36,40,44,48,
# 52,56,60,64)
# 0x11 5G subband1 (5G: channel 100,104,108,112,
# 116,120,124,128,
# 132,136,140,144)
# 0x12 5G subband2 (5G: channel 149,153,157,161,165,172)
# 0x13 5G subband3 (5G: channel 183,184,185,187,188,
# 189, 192,196;
# 5G: channel 7,8,11,12,16,34)
}
txpwrlimit_5g_cfg_get_sub0={
CmdCode=0x00fb # do NOT change this line
Action:2=0 # 0 - GET
SubBand:2=0x10 # 0x00 2G subband (2.4G: channel 1-14)
# 0x10 5G subband0 (5G: channel 36,40,44,48,
# 52,56,60,64)
# 0x11 5G subband1 (5G: channel 100,104,108,112,
# 116,120,124,128,
# 132,136,140,144)
# 0x12 5G subband2 (5G: channel 149,153,157,161,165,172)
# 0x13 5G subband3 (5G: channel 183,184,185,187,188,
# 189, 192,196;
# 5G: channel 7,8,11,12,16,34)
}
txpwrlimit_5g_cfg_get_sub1={
CmdCode=0x00fb # do NOT change this line
Action:2=0 # 0 - GET
SubBand:2=0x11 # 0x00 2G subband (2.4G: channel 1-14)
# 0x10 5G subband0 (5G: channel 36,40,44,48,
# 52,56,60,64)
# 0x11 5G subband1 (5G: channel 100,104,108,112,
# 116,120,124,128,
# 132,136,140,144)
# 0x12 5G subband2 (5G: channel 149,153,157,161,165,172)
# 0x13 5G subband3 (5G: channel 183,184,185,187,188,
# 189, 192,196;
# 5G: channel 7,8,11,12,16,34)
}
txpwrlimit_5g_cfg_get_sub2={
CmdCode=0x00fb # do NOT change this line
Action:2=0 # 0 - GET
SubBand:2=0x12 # 0x00 2G subband (2.4G: channel 1-14)
# 0x10 5G subband0 (5G: channel 36,40,44,48,
# 52,56,60,64)
# 0x11 5G subband1 (5G: channel 100,104,108,112,
# 116,120,124,128,
# 132,136,140,144)
# 0x12 5G subband2 (5G: channel 149,153,157,161,165,172)
# 0x13 5G subband3 (5G: channel 183,184,185,187,188,
# 189, 192,196;
# 5G: channel 7,8,11,12,16,34)
}
txpwrlimit_5g_cfg_get_sub3={
CmdCode=0x00fb # do NOT change this line
Action:2=0 # 0 - GET
SubBand:2=0x13 # 0x00 2G subband (2.4G: channel 1-14)
# 0x10 5G subband0 (5G: channel 36,40,44,48,
# 52,56,60,64)
# 0x11 5G subband1 (5G: channel 100,104,108,112,
# 116,120,124,128,
# 132,136,140,144)
# 0x12 5G subband2 (5G: channel 149,153,157,161,165,172)
# 0x13 5G subband3 (5G: channel 183,184,185,187,188,
# 189, 192,196;
# 5G: channel 7,8,11,12,16,34)
}
## Set CFG data for Tx power limitation
##
## TLVStartFreq: Starting Frequency of the band for this channel
## 2407, 2414 or 2400 for 2.4 GHz
## 5000
## 4000
## TLVChanWidth: Channel Width
## 20
## TLVChanNum : Channel Number
## TLVPwr[] : ModulationGroup
## 0: CCK (1,2,5.5,11 Mbps)
## 1: OFDM (6,9,12,18 Mbps)
## 2: OFDM (24,36 Mbps)
## 3: OFDM (48,54 Mbps)
## 4: HT20 (MCS0,1,2)
## 5: HT20 (MCS3,4)
## 6: HT20 (MCS5,6,7)
## 7: HT40 (MCS0,1,2)
## 8: HT40 (MCS3,4)
## 9: HT40 (MCS5,6,7)
## 10: VHT_QAM256 (MCS8)
## 11: VHT_40_QAM256 (MCS8,9)
## 12: VHT_80_PSK (MCS0,1,2)
## 13: VHT_80_QAM16 (MCS3,4)
## 14: VHT_80_QAM64 (MCS5,6,7)
## 15: VHT_80_QAM256 (MCS8,9)
## 16: HE_20_QAM256 (MCS8, 9)
## 17: HE_20_QAM1024 (MCS10,11)
## 18: HE_40_QAM1024 (MCS10,11)
## 19: HE_80_QAM1024 (MCS10,11)
## Power Limit in dBm
##
## Note: For KF, add VHT 20/40/80 1SS/2SS mod group.
## 2G subband0 Tx power limit CFG
txpwrlimit_2g_cfg_set={
CmdCode=0x00fb # do NOT change this line
Action:2=1 # 1 - SET
SubBand:2=0 # do NOT use this member in set cmd
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=2407
TLVChanWidth:1=20
TLVChanNum:1=1
TLVPwr:36='0,17,1,16,2,16,3,16,4,16,5,16,6,16,7,14,8,14,9,14,10,16,11,14,12,0,13,0,14,0,15,0,16,16,17,16,18,14,19,0'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=2407
TLVChanWidth:1=20
TLVChanNum:1=2
TLVPwr:36='0,17,1,16,2,16,3,16,4,16,5,16,6,16,7,13,8,13,9,13,10,16,11,13,12,0,13,0,14,0,15,0,16,16,17,16,18,13,19,0'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=2407
TLVChanWidth:1=20
TLVChanNum:1=3
TLVPwr:36='0,17,1,17,2,17,3,17,4,17,5,17,6,17,7,14,8,14,9,14,10,17,11,14,12,0,13,0,14,0,15,0,16,17,17,17,18,14,19,0'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=2407
TLVChanWidth:1=20
TLVChanNum:1=4
TLVPwr:36='0,17,1,18,2,18,3,18,4,18,5,18,6,18,7,13,8,19,9,18,10,18,11,18,12,0,13,0,14,0,15,0,16,18,17,17,18,17,19,0'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=2407
TLVChanWidth:1=20
TLVChanNum:1=5
TLVPwr:36='0,15,1,16,2,16,3,16,4,16,5,16,6,16,7,14,8,17,9,17,10,16,11,17,12,0,13,0,14,0,15,0,16,16,17,16,18,17,19,0'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=2407
TLVChanWidth:1=20
TLVChanNum:1=6
TLVPwr:36='0,15,1,16,2,16,3,16,4,16,5,16,6,16,7,17,8,13,9,13,10,16,11,13,12,0,13,0,14,0,15,0,16,16,17,16,18,13,19,0'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=2407
TLVChanWidth:1=20
TLVChanNum:1=7
TLVPwr:36='0,15,1,16,2,16,3,16,4,16,5,16,6,16,7,17,8,13,9,13,10,16,11,13,12,0,13,0,14,0,15,0,16,16,17,16,18,13,19,0'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=2407
TLVChanWidth:1=20
TLVChanNum:1=8
TLVPwr:36='0,15,1,16,2,16,3,16,4,16,5,16,6,16,7,17,8,14,9,14,10,16,11,14,12,0,13,0,14,0,15,0,16,16,17,16,18,14,19,0'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=2407
TLVChanWidth:1=20
TLVChanNum:1=9
TLVPwr:36='0,15,1,17,2,17,3,17,4,16,5,16,6,16,7,13,8,14,9,14,10,16,11,14,12,0,13,0,14,0,15,0,16,16,17,16,18,14,19,0'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=2407
TLVChanWidth:1=20
TLVChanNum:1=10
TLVPwr:36='0,15,1,16,2,16,3,16,4,15,5,15,6,15,7,0,8,0,9,0,10,15,11,0,12,0,13,0,14,0,15,0,16,15,17,15,18,0,19,0'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=2407
TLVChanWidth:1=20
TLVChanNum:1=11
TLVPwr:36='0,15,1,15,2,15,3,15,4,14,5,14,6,14,7,0,8,0,9,0,10,14,11,0,12,0,13,0,14,0,15,0,16,14,17,14,18,0,19,0'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=2407
TLVChanWidth:1=20
TLVChanNum:1=12
TLVPwr:36='0,16,1,15,2,15,3,15,4,14,5,14,6,14,7,0,8,0,9,0,10,14,11,0,12,0,13,0,14,0,15,0,16,14,17,14,18,0,19,0'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=2407
TLVChanWidth:1=20
TLVChanNum:1=13
TLVPwr:36='0,16,1,15,2,15,3,15,4,14,5,14,6,14,7,0,8,0,9,0,10,14,11,0,12,0,13,0,14,0,15,0,16,14,17,14,18,0,19,0'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=2407
TLVChanWidth:1=20
TLVChanNum:1=14
TLVPwr:36='0,0,1,0,2,0,3,0,4,0,5,0,6,0,7,0,8,0,9,0,10,0,11,0,12,0,13,0,14,0,15,0,16,0,17,0,18,0,19,0'
}
}
## 5G subband1 Tx power limit CFG
txpwrlimit_5g_cfg_set_sub0={
CmdCode=0x00fb # do NOT change this line
Action:2=1 # 1 - SET
SubBand:2=0 # do NOT use this member in set cmd
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=36
TLVPwr:64='0,0,1,19,2,19,3,19,4,19,5,19,6,19,7,19,8,19,9,18,10,19,11,18,12,17,13,17,14,17,15,16,16,18,17,17,18,15,19,13'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=40
TLVPwr:64='0,0,1,19,2,19,3,19,4,19,5,19,6,19,7,19,8,19,9,18,10,19,11,18,12,17,13,17,14,17,15,16,16,18,17,17,18,15,19,13'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=44
TLVPwr:64='0,0,1,19,2,19,3,19,4,19,5,19,6,19,7,19,8,19,9,18,10,19,11,18,12,17,13,17,14,17,15,16,16,18,17,17,18,15,19,13'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=48
TLVPwr:64='0,0,1,19,2,19,3,19,4,19,5,19,6,19,7,19,8,19,9,18,10,19,11,18,12,17,13,17,14,17,15,16,16,18,17,17,18,15,19,13'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=52
TLVPwr:64='0,0,1,19,2,19,3,19,4,19,5,19,6,19,7,19,8,19,9,18,10,19,11,18,12,16,13,16,14,16,15,16,16,18,17,17,18,15,19,13'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=56
TLVPwr:64='0,0,1,19,2,19,3,19,4,19,5,19,6,19,7,19,8,19,9,18,10,19,11,18,12,16,13,16,14,16,15,16,16,18,17,17,18,15,19,13'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=60
TLVPwr:64='0,0,1,19,2,19,3,19,4,19,5,19,6,19,7,18,8,18,9,18,10,19,11,18,12,16,13,16,14,16,15,16,16,18,17,17,18,15,19,13'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=64
TLVPwr:64='0,0,1,19,2,19,3,19,4,18,5,18,6,18,7,18,8,18,9,18,10,18,11,18,12,16,13,16,14,16,15,16,16,18,17,17,18,15,19,13'
}
}
## 5G subband2 Tx power limit CFG
txpwrlimit_5g_cfg_set_sub1={
CmdCode=0x00fb # do NOT change this line
Action:2=1 # 1 - SET
SubBand:2=0 # do NOT use this member in set cmd
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=100
TLVPwr:64='0,0,1,18,2,18,3,17,4,17,5,17,6,16,7,15,8,15,9,15,10,16,11,15,12,13,13,13,14,13,15,13,16,15,17,14,18,14,19,12'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=104
TLVPwr:64='0,0,1,18,2,18,3,17,4,18,5,18,6,16,7,15,8,15,9,15,10,16,11,15,12,13,13,13,14,13,15,13,16,15,17,14,18,14,19,12'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=108
TLVPwr:64='0,0,1,18,2,18,3,17,4,18,5,18,6,16,7,18,8,18,9,16,10,16,11,15,12,13,13,13,14,13,15,13,16,15,17,14,18,14,19,12'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=112
TLVPwr:64='0,0,1,18,2,18,3,17,4,18,5,18,6,16,7,18,8,18,9,16,10,16,11,15,12,13,13,13,14,13,15,13,16,15,17,14,18,14,19,12'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=116
TLVPwr:64='0,0,1,18,2,18,3,17,4,18,5,18,6,16,7,18,8,18,9,16,10,16,11,15,12,18,13,18,14,15,15,15,16,15,17,14,18,14,19,12'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=120
TLVPwr:64='0,0,1,18,2,18,3,17,4,18,5,18,6,16,7,18,8,18,9,16,10,16,11,15,12,18,13,18,14,15,15,15,16,15,17,14,18,14,19,12'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=124
TLVPwr:64='0,0,1,19,2,19,3,19,4,19,5,19,6,18,7,18,8,19,9,18,10,18,11,17,12,18,13,18,14,16,15,15,16,17,17,16,18,15,19,11'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=128
TLVPwr:64='0,0,1,19,2,19,3,19,4,19,5,19,6,18,7,18,8,19,9,18,10,18,11,17,12,18,13,18,14,16,15,15,16,17,17,16,18,15,19,11'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=132
TLVPwr:64='0,0,1,19,2,19,3,19,4,19,5,19,6,18,7,18,8,19,9,18,10,18,11,17,12,18,13,18,14,16,15,15,16,17,17,16,18,15,19,11'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=136
TLVPwr:64='0,0,1,19,2,19,3,19,4,19,5,19,6,18,7,18,8,19,9,18,10,18,11,17,12,18,13,18,14,16,15,15,16,17,17,16,18,15,19,11'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=140
TLVPwr:64='0,0,1,19,2,19,3,19,4,19,5,19,6,18,7,18,8,19,9,18,10,18,11,17,12,18,13,18,14,16,15,15,16,17,17,16,18,15,19,11'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=144
TLVPwr:64='0,0,1,19,2,19,3,19,4,19,5,19,6,18,7,18,8,19,9,18,10,18,11,17,12,18,13,18,14,16,15,15,16,17,17,16,18,15,19,11'
}
}
## 5G subband3 Tx power limit CFG
txpwrlimit_5g_cfg_set_sub2={
CmdCode=0x00fb # do NOT change this line
Action:2=1 # 1 - SET
SubBand:2=0 # do NOT use this member in set cmd
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=149
TLVPwr:64='0,0,1,16,2,16,3,16,4,15,5,15,6,15,7,14,8,14,9,14,10,15,11,14,12,14,13,14,14,14,15,14,16,15,17,15,18,13,19,11'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=153
TLVPwr:64='0,0,1,19,2,19,3,19,4,19,5,19,6,18,7,14,8,19,9,18,10,17,11,17,12,14,13,14,14,14,15,14,16,17,17,16,18,13,19,11'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=157
TLVPwr:64='0,0,1,19,2,19,3,19,4,19,5,19,6,18,7,19,8,19,9,18,10,17,11,17,12,14,13,14,14,14,15,14,16,17,17,16,18,13,19,11'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=161
TLVPwr:64='0,0,1,18,2,18,3,18,4,18,5,18,6,18,7,19,8,19,9,18,10,17,11,17,12,14,13,14,14,14,15,14,16,17,17,16,18,13,19,11'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=165
TLVPwr:64='0,0,1,15,2,15,3,15,4,15,5,15,6,15,7,14,8,14,9,14,10,15,11,14,12,14,13,14,14,14,15,14,16,15,17,15,18,13,19,11'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=172
TLVPwr:64='0,0,1,15,2,15,3,15,4,15,5,15,6,15,7,14,8,14,9,14,10,15,11,14,12,14,13,14,14,14,15,14,16,15,17,15,18,13,19,11'
}
}
## 5G subband4 Tx power limit CFG
txpwrlimit_5g_cfg_set_sub3={
CmdCode=0x00fb # do NOT change this line
Action:2=1 # 1 - SET
SubBand:2=0 # do NOT use this in set cmd
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=4000
TLVChanWidth:1=20
TLVChanNum:1=183
TLVPwr:64='0,5,1,5,2,5,3,5,4,5,5,5,6,5,7,5,8,5,9,5,10,5,11,5,12,5,13,5,14,5,15,5,16,5,17,5,18,5,19,5'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=4000
TLVChanWidth:1=20
TLVChanNum:1=184
TLVPwr:64='0,5,1,5,2,5,3,5,4,5,5,5,6,5,7,5,8,5,9,5,10,5,11,5,12,5,13,5,14,5,15,5,16,5,17,5,18,5,19,5'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=4000
TLVChanWidth:1=20
TLVChanNum:1=185
TLVPwr:64='0,5,1,5,2,5,3,5,4,5,5,5,6,5,7,5,8,5,9,5,10,5,11,5,12,5,13,5,14,5,15,5,16,5,17,5,18,5,19,5'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=4000
TLVChanWidth:1=20
TLVChanNum:1=187
TLVPwr:64='0,5,1,5,2,5,3,5,4,5,5,5,6,5,7,5,8,5,9,5,10,5,11,5,12,5,13,5,14,5,15,5,16,5,17,5,18,5,19,5'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=4000
TLVChanWidth:1=20
TLVChanNum:1=188
TLVPwr:64='0,5,1,5,2,5,3,5,4,5,5,5,6,5,7,5,8,5,9,5,10,5,11,5,12,5,13,5,14,5,15,5,16,5,17,5,18,5,19,5'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=4000
TLVChanWidth:1=20
TLVChanNum:1=189
TLVPwr:64='0,5,1,5,2,5,3,5,4,5,5,5,6,5,7,5,8,5,9,5,10,5,11,5,12,5,13,5,14,5,15,5,16,5,17,5,18,5,19,5'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=4000
TLVChanWidth:1=20
TLVChanNum:1=192
TLVPwr:64='0,5,1,5,2,5,3,5,4,5,5,5,6,5,7,5,8,5,9,5,10,5,11,5,12,5,13,5,14,5,15,5,16,5,17,5,18,5,19,5'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=4000
TLVChanWidth:1=20
TLVChanNum:1=196
TLVPwr:64='0,5,1,5,2,5,3,5,4,5,5,5,6,5,7,5,8,5,9,5,10,5,11,5,12,5,13,5,14,5,15,5,16,5,17,5,18,5,19,5'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=7
TLVPwr:64='0,5,1,5,2,5,3,5,4,5,5,5,6,5,7,5,8,5,9,5,10,5,11,5,12,5,13,5,14,5,15,5,16,5,17,5,18,5,19,5'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=8
TLVPwr:64='0,5,1,5,2,5,3,5,4,5,5,5,6,5,7,5,8,5,9,5,10,5,11,5,12,5,13,5,14,5,15,5,16,5,17,5,18,5,19,5'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=11
TLVPwr:64='0,5,1,5,2,5,3,5,4,5,5,5,6,5,7,5,8,5,9,5,10,5,11,5,12,5,13,5,14,5,15,5,16,5,17,5,18,5,19,5'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=12
TLVPwr:64='0,5,1,5,2,5,3,5,4,5,5,5,6,5,7,5,8,5,9,5,10,5,11,5,12,5,13,5,14,5,15,5,16,5,17,5,18,5,19,5'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=16
TLVPwr:64='0,5,1,5,2,5,3,5,4,5,5,5,6,5,7,5,8,5,9,5,10,5,11,5,12,5,13,5,14,5,15,5,16,5,17,5,18,5,19,5'
}
ChanTRPC.TlvType:2=0x0189
ChanTRPC.TlvLength:2={
TLVStartFreq:2=5000
TLVChanWidth:1=20
TLVChanNum:1=34
TLVPwr:64='0,5,1,5,2,5,3,5,4,5,5,5,6,5,7,5,8,5,9,5,10,5,11,5,12,5,13,5,14,5,15,5,16,5,17,5,18,5,19,5'
}
}

View file

@ -1,36 +0,0 @@
01 00
0F 00 1C 02
00 20 2E 0F 00 00 00 20 FF FF 40 00 BE 00 2C 05
00 00 00 10 00 03 24 A7 02 00 00 3F 01 00 00 37
01 4C 07 5E 00 00 01 6C FF F1 28 00 00 01 00 00
76 7F 00 00 00 01 01 00 7C 5F 00 00 00 01 02 00
02 7F 00 00 00 01 03 00 08 5F 00 00 00 01 04 00
0D 7F 00 00 00 01 05 00 11 FF 00 00 00 01 06 00
15 5F 00 00 00 01 07 00 16 DF 00 00 44 24 00 00
75 3F 00 00 44 24 01 00 79 FF 00 00 44 24 02 00
7F BF 00 00 44 24 03 00 05 BF 00 00 44 24 04 00
0B 7F 00 00 44 24 05 00 11 3F 00 00 44 24 06 00
15 BF 00 00 44 24 07 00 18 BF 00 00 48 64 00 00
76 3F 00 00 48 64 01 00 7B 1F 00 00 48 64 02 00
01 1F 00 00 48 64 03 00 06 FF 00 00 48 64 04 00
0C 9F 00 00 48 64 05 00 12 3F 00 00 48 64 06 00
16 1F 00 00 48 64 07 00 18 3F 00 00 4C 95 00 00
77 1F 00 00 4C 95 01 00 7B BF 00 00 4C 95 02 00
01 BF 00 00 4C 95 03 00 07 BF 00 00 4C 95 04 00
0D 3F 00 00 4C 95 05 00 12 5F 00 00 4C 95 06 00
15 FF 00 00 4C 95 07 00 18 3F 00 00 4C B2 00 00
75 7F 00 00 4C B2 01 00 7A 9F 00 00 4C B2 02 00
00 5F 00 00 4C B2 03 00 06 3F 00 00 4C B2 04 00
0B DF 00 00 4C B2 05 00 11 1F 00 00 4C B2 06 00
14 FF 00 00 4C B2 07 00 17 BF 00 00 00 20 48 62
00 00 01 8C FF FF 05 00 00 10 04 A4 40 22 A8 E5
44 32 AC A5 48 42 28 8C 4C 54 B4 A7 00 44 60 5A
00 00 01 D0 0F 07 01 04 07 10 07 10 00 F0 00 F0
00 00 00 00 FF FF 0C FF 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 14 7D 63 00 00 01 E4 F1 11 01 01 00 00 08 08
FF 14 01 00 00 1C F1 37 00 00 02 00 02 04 00 01
00 00 00 08 00 2D C6 C0 43 00 00 66 00 00 00 50
00 1C BD 5F FF FF FF FF 02 05 00 01 00 00 00 08
00 2D C6 C0 43 00 00 77 00 00 00 50

View file

@ -1,22 +0,0 @@
# File : ed_mac_ctrl_V2_nw61x.conf
#
# ./mlanutl mlan0 hostcmd config/ed_mac_ctrl_V2_nw61x.conf ed_mac_ctrl_v2
#
## Set Energy Detect Threshold for EU Adaptivity test
ed_mac_ctrl_v2={
CmdCode=0x0130 #Command code, DO NOT change this line
ed_ctrl_2g.enable:2=0x1 # 0 - disable EU adaptivity for 2.4GHz band
# 1 - enable EU adaptivity for 2.4GHz band
ed_ctrl_2g.offset:2=0xA # 0 - Default Energy Detect threshold
#offset value range: 0x80 to 0x7F
ed_ctrl_5g.enable:2=0x1 # 0 - disable EU adaptivity for 5GHz band
# 1 - enable EU adaptivity for 5GHz band
ed_ctrl_5g.offset:2=0xA # 0 - Default Energy Detect threshold
#offset value range: 0x80 to 0x7F
ed_ctrl_txq_lock:4=0x1e00FF #DO NOT Change this line
}

Binary file not shown.

View file

@ -154,10 +154,9 @@ SD8801 = {
auto_ds=1
host_mlme=1
fw_name=nxp/sd8801_uapsta.bin
init_hostcmd_cfg=nxp/ed_mac_ctrl_V1_8801.conf
}
SD9177 = {
SDIW612 = {
cfg80211_wext=0xf
max_vir_bss=1
cal_data_cfg=none