mirror of
https://github.com/NXP/imx-firmware.git
synced 2024-11-15 00:55:34 +00:00
25 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Sherry Sun
|
596d698924 |
FwImage: update firmware to mxm5x17391
Updated firmware: SDIO-UART W8987 Firmware version 16.92.21.p76.5 PCIE-UART W8997 Firmware version 16.92.21.p84 SDIO-UART W8997 Firmware version 16.92.21.p84 SDIO-UART IW416 Firmware version 16.92.21.p84.1 Unchanged firmware: SDIO_UART IW612 Firmware version 18.99.1.p154.40 SDIO-UART W8801 Firmware version 14.92.36.p180 SDIO-UART W9098 Firmware version 17.92.1.p136.24 PCIE-UART W9098 Firmware version 17.92.1.p136.24 Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
09b5e3d5b6 |
FwImage: update firmware to mxm5x17368.p2
Updated firmware: SDIO-UART W8987 Firmware version 16.92.21.p76.2 PCIE-UART W8997 Firmware version 16.92.21.p76.2 SDIO-UART W8997 Firmware version 16.92.21.p76.2 SDIO-UART IW416 Firmware version 16.92.21.p76.3 SDIO_UART IW612 Firmware version 18.99.1.p154.40 SDIO-UART W8801 Firmware version 14.92.36.p180 SDIO-UART W9098 Firmware version 17.92.1.p136.24 PCIE-UART W9098 Firmware version 17.92.1.p136.24 WLAN new Additions/Removals/Improvements: --------------- 1. SD8987: WSFD-443: Clock synch feature WLAN Bug Fixes: --------------- 1. SD8987/PCIE8997/IW416: WSW-24682: Ping is failing between testbed STA and STAUT after GTK rekey from AP 2. SD8987/PCIE8997/IW416: WSW-23252: Carrier sense test on Japanese regulation fail 3. SD8987: WSW-24668: STAUT is sending unprotected BTM/WNM action frames 4. SD8987: WSW-24629: Add support for antenna diversity control using gpio 5. SD8987: WSFD-658: Annex 106 - GPIO based FEM control via SOC register programming 6. SD8987: WSW-23926: UDP RX is lower than 5Mbps when playing music in shielding room 7. SD8987: WSW-22542: WiFi hang up with diff command timeout during run BT Inband/outband IR test w/ WiFi activities 8. SD8987/IW416: WSFD-653: Enable AES in FW by default 9. SD8987: WSW-23252 WSW-24023 Fix for probe resp and beacon leak 10. SD8987: WSFD-494: WiFi won't be connected back immediately when screen is off 11. PCIE8997: WSW-23539: Disconnection with reason 15 during WPA re-keying 12. PCIE8997: WSW-23252 WSW-24023: Fix for probe resp and beacon leak 13. IW416: WSW-23771: WLAN deauthentication observed if A2DP suspended and started again 14. IW416: WSW-23957: MMHAP Unable make connection with NXP Reference Devices 15. IW612: WSW-23908: Observing device hang issue when doing channel switch for MMH with open security 16. IW612: WSW-24518: 100% chload sometimes if EDMAC is enabled and any STA is connected 17. IW612: WCSWREL-413: P2P cannot work with the latest firmware 18. PCIE9098/SD9098: WCSWREL-414: P2P cannot work and observe command timeout 19. PCIE9098: Wakeup card timeout after suspend/resume 20. PCIE9098/SD9098: WSFD-599: Support trigger frame generating in RF test mode BT/Co-ex Bug Fixes: ------------------- 1. SD8987: WSW-22599: Audio glitch could be heard when ACL is Master role(BT only scenario) in Congestion environment 2. IW416: WSW-23661: LE power capping to 10 dBm needs to be revoked for silicon supporting BT 5.0 and higher versions 3. IW416: WSW-24502: Audio is not heard in TX direction during incoming/outgoing NBS call with Ref device 4. IW416: WSW-21498: Heavy A2DP Audio Distortion (Glitch in every ~1sec) observed when DUT is at 5 meter distance from reference device 5. IW416: WSW-22879: 2nd BT(S) link failed to establish in the presence of SCO/eSCO connection on the first(M) link 6. IW416: WSW-19213: After starting BT/BLE Tx, Tx response is observed momentarily on litepoint 7. IW416: WSW-24321: "Unknown HCI Command " returned as status for cmd "3f fc 00" to enable Independent Reset via in-Band 8. IW416: WSW-25052: FW not getting up after enabling Independent Reset via in-Band 9. IW416: WSW-24024: Wlan De-authentication Observed while STA/MMH+LE Scan Coex Scenario 10. IW416: WSW-24825: DUT not responding to the pair/connect request sent by the reference device 11. PCIE8997: WSW-24482: Random mute pattern observed during A2DP_SRC streaming with Ref1 when OPP_TX started with Ref2 12. PCIE8997: WSW-18190: Issue observed in BT Paging /LE Connection + MMH/STA[BGN20] with Wifi RX traffic 13. IW612: WSW-23062: Speaker Disconnection while switching A2DP streaming between two speakers 14. IW612: WSW-23992: Frequent Page timeout (0x04) observed in DUT for Create_Connection command in scatternet scenarios 15. IW612: WSW-24302: Severe A2DP glitches are observed while connecting disconnecting A2DP-SNK devices Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
87d2442830 |
FwImage: update firmware to mxm5x17368
Updated firmware: SDIO-UART W8987 Firmware version 16.92.21.p76 PCIE-UART W8997 Firmware version 16.92.21.p76 SDIO-UART W8997 Firmware version 16.92.21.p76 SDIO-UART IW416 Firmware version 16.92.21.p76 SDIO_UART IW612 Firmware version 18.99.1.p154.18 Unchanged firmware: SDIO-UART W8801 Firmware version 14.92.36.p178 SDIO-UART W9098 Firmware version 17.92.1.p136.13 PCIE-UART W9098 Firmware version 17.92.1.p136.13 WLAN new Additions/Removals/Improvements: --------------- 1. SD8987/IW416: WiFi Agile Multi-Band 2. SD8987: Monitor Mode 3. SD8987/IW416: uAPSD / PPS 4. SD8987: Packet Coalescing 5. SD8987/IW416: Support Boot Sleep Patch 6. PCIE8997/SD8997/IW416: Enable Wifi Easy Connect (DPP) 7. PCIE8997/SD8997: Wi-Fi Enhanced Open (OWE) 8. PCIE8997/SD8997/IW416: WPA3 embedded 9. PCIE8997/SD8997/IW416: mDNS (Bonjour) Offload - Wi-Fi 10. PCIE8997/SD8997/IW416: IPv6 NS Offload 11. PCIE8997/SD8997/IW416: Auto Reconnect 12. PCIE8997/SD8997: Independent reset via inband 13. PCIE8997/SD8997: Enable Independent Reset via Out-of-Band WLAN Bug Fixes: --------------- 1. SD8987: WSW-23818: Fixed the DFS channel failure 2. SD8997: WSW-23254: auto_tx Feature fails with seconds interval configuration 3. SD8997: WSW-19809: less TP observed in P2P- 11AC/AN/BGN, TCP/UDP, TX/RX 4. IW612: WSW-23423: WLAN+BT Parallel download and Combo FW download consuming more current compared to BT+WLAN 5. IW612: WSW-21650: False radar detection when IW620 transmitting 6. IW612: WSW-22003: Low throughput was observed in 2.4G-Tx when Netgear AP 20/40 MHz coexistence was enabled BT/COEX New Additions/Removals/Improvements: ------------------- 1. SD8987/PCIE8997/SD8997: BT/BLE Deepsleep 2. PCIE8997: Wake on BLE 3. IW416: BLE Multi-Adv / Advertisement Extension 4. IW416: LE Long Range BT/Co-ex Bug Fixes: ------------------- 1. SD8987: WSW-23234: BREDR qualification TCs failure 2. SD8987: WSW-23233: BLE qualification TCs failures 3. SD8987: WSW-21475: Only one headset can hear the voice after establish two esco links during DUAL HFP test 4. SD8987: WSW-23110: Pairing failure when connecting with nRF connect app from mobile phone 5. SD8987: WSW-22242: Sometimes BT firmware is downloaded successfully, but cannot active and WIFI scan command will timeout 6. PCIE8997/SD8997: WSW-19165: New BREDR TCs and failures with TCRL2021-1 and TCRL2021-2 7. PCIE8997/SD8997: WSW-19166: New BLE TCs and failures with TCRL2021-1 and TCRL2021-2 8. PCIE8997/SD8997: WSW-20158: Disconnection with reason 15 during WPA re-keying 9. PCIE8997/SD8997: WSW-21809: Both OPP & HFP links drop when DUT starts OPP-TX transfer 10. IW416: WSW-22293: BluetoothLeAdvertiserTest cases fails during CTS run 11. IW416: WSW-19098: New BREDR TCs and failures with TCRL2021-2, E17535 12. IW416: WSW-19164: New BLE TCs and failures with TCRL2021-2, E17535 13. IW416: WSW-22605: DUT displaying wrong LMP Version i.e 5.0 instead of 5.3 14. IW612: WSW-23431: DUT hangs during execute LL TCs ,hard to continue the Qual testing 15. IW612: WSW-21751: No eSCO connection complete event after remote device reject eSCO connection Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
982bb10dfa |
FwImage: update firmware to mxm5x17366.p3
Updated firmware: SDIO-UART W8987 Firmware version 16.92.21.p69.3 SDIO-UART W9098 Firmware version 17.92.1.p136.13 PCIE-UART W9098 Firmware version 17.92.1.p136.13 Unchanged firmware: SDIO-UART W8801 Firmware version 14.92.36.p178 PCIE-UART W8997 Firmware version 16.92.21.p55.3 SDIO-UART W8997 Firmware version 16.92.21.p55.3 SDIO-UART IW416 Firmware version 16.92.21.p55.3 WLAN Bug Fixes: --------------- 1. PCIE9098/SD9098: WSW-22305: wifi cmd timeout showed when test switch connect with different APs 2. PCIE9098/SD9098: WSW-20645: DUT fails to reassociate when Ex-AP changes its channel to 149/HE80 3. PCIE9098/SD9098: WSW-20819: detect a spike on spectrum during CAC 4. PCIE9098/SD9098: WSW-22448: High Channel Load seen in getchload command in APUT when it is receiving full bandwidth UDP Rx traffic 5. PCIE9098/SD9098: WSW-20549: Scan CMD Timeout 0x107 observed on 9098 STA when attempting to associate with 9098 uAP 6. PCIE9098/SD9098: WSW-22460: DUT send RTS packet during RTS threshold boundary test 7. PCIE9098/SD9098: WSW-20734: In-STA associates in VHT20 instead of VHT40 using mlan0 interface to Ex-AP configured in HE80/VHT80 mode 8. PCIE9098/SD9098: WSW-21097: 0x5e Command timeout observed, while running connect disconnect with multiclient (8 clients) after 1 hour 9. PCIE9098/SD9098: WSW-22158: False Radar flood observed on Aux Path 10. PCIE9098/SD9098: WSW-20625: External station can't connect with 5G uAP interface after long time standby 11. PCIE9098/SD9098: WSW-22012: Disable JTAG in SW to meet various security requirements. 12. PCIE9098/SD9098: WSW-20445: extAP-wpa23 and mmlan-wpa12 ping aging dis-connect 13. PCIE9098/SD9098: WSW-21983: STA in 2.4GHz not connecting to Ex-AP from Android HMI 14. PCIE9098/SD9098: WSW-22216: 0x107 command timeout when kept staying on Wi-Fi setting GUI with STA connected 15. SD8987: WSW-21659: cmd timeout happen after DUT switches to New DFS channel 16. SD8987: WSW-19978: DUT hang observed while streaming A2DP music after launching "truncated_sco_link_request" exploiter using Braktooth 17. SD8987: WSW-21879: Fixed the issue of false radar detection 18. SD8987: WSW-20347: Frequent false radar detect in CH52 VH40 when Ext AP in CH60 nearby 19. SD8987: WSW-22596: FP92+ release 2G/5G WAPI connected failed BT/Co-ex Bug Fixes: ------------------- 1. PCIE9098/SD9098: WSW-23264: Command timeout happens for vendor command HCI_CMD_MRVL_HOST_PCM_CONFIG(0x6F) 2. PCIE9098/SD9098: WSW-21142: Random command timeout when performing connection & disconnection with remote phone in a loop 3. PCIE9098/SD9098: WSW-18717: Severe A2DP glitches observed for Play-Pause on REF2 during active HFP on REF1 4. PCIE9098/SD9098: WSW-22782: LE link drop with reason "Instant Passed" during LE Disconnection (DUT role Slave) 5. PCIE9098/SD9098: WSW-22312: Audio is not heard in both Tx/Rx direction during incoming/outgoing WBS call with Ref device 6. PCIE9098/SD9098: WSW-16791: Non-supported LE Features are still observed as supported as part of MM release 7. PCIE9098/SD9098: WSW-22296: DUT unable to do LE Scan on nRF APP for GATT Outgoing connection 8. PCIE9098/SD9098: WSW-22419: In dual HFP connection Timeout issue is observed with the eSCO links 9. PCIE9098/SD9098: WSW-20203: Inquiry Scan failed 2 out of 5 times while STA/MMH iPerf traffic 10. PCIE9098/SD9098: WSW-20437: Severe A2DP glitches observed after disconnecting the SCO Bridge call 11. PCIE9098/SD9098: WSW-18024: Auto enable PCM configurations for Android 12. PCIE9098/SD9098: WSW-18065: FW hang observed during DUAL HF scenario verification 13. SD8987: WSW-23190: "Memory Capacity Exceeded" can be found if add the 5th device to the BLE Resolving List 14. SD8987: WSW-22380: BT crash observed, unable to recover while creating 4/5 LE connection 15. SD8987: WSW-22100: DUT as configurator, Initiator fail to AUTH CCT1(configurator) with PKEX way 16. SD8987: WSW-21481: Second device failed to be paired/connected during first device doing HFP outgoing call 17. SD8987: WSW-20418: DUT hang observed while streaming A2DP music after launching "feature_req_ping_pong" exploiter using Braktooth Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
aeba88decc |
FwImage: update firmware to mxm5x17362
Updated firmware: SDIO-UART W8987 Firmware version 16.92.21.p69 SDIO-UART W9098 Firmware version 17.92.1.p136.3 PCIE-UART W9098 Firmware version 17.92.1.p136.3 SDIO-UART W8801 Firmware version 14.92.36.p178 Unchanged firmware: PCIE-UART W8997 Firmware version 16.92.21.p55.3 SDIO-UART W8997 Firmware version 16.92.21.p55.3 SDIO-UART IW416 Firmware version 16.92.21.p55.3 WLAN new Additions/Removals/Improvements: --------------- 1. PCIE9098/SD9098: DL-MUMIMO (STA Only) 2. PCIE9098/SD9098: UL-MUMIMO (STA Only) 3. PCIE9098/SD9098: Extended Range 4. PCIE9098/SD9098: 802.11k 5. PCIE9098/SD9098: 802.11v 6. PCIE9098/SD9098: 802.11z (Host based TDLS) 7. PCIE9098/SD9098: P2P for Miracast 8. PCIE9098/SD9098/SD8987: Wi-Fi Enhanced Open (OWE) 9. PCIE9098/SD9098: Clocksync 10. PCIE9098/SD9098/SD8987: Wireless Apple Car Play (R5) 11. PCIE9098/SD9098: Wireless Android Auto 12. PCIE9098/SD9098: Non-Triggered Target Wake Time 13. PCIE9098/SD9098: 802.11r (STA Roaming Support) 14. PCIE9098/SD9098: DCM 15. PCIE9098/SD9098: 802.11mc / Location 16. PCIE9098/SD9098: Easy Mesh 17. PCIE9098/SD9098: DRCS 18. PCIE9098/SD9098/SD8987: Wi-Fi Easy Connect (DPP) 19. PCIE9098/SD9098: DFS (Radar Detection) Master 20. PCIE9098/SD9098: uAPSD / PPS 21. PCIE9098/SD9098: Zero Wait DFS 22. PCIE9098/SD9098/SD8987: WAPI 23. PCIE9098/SD9098: Wi-Fi Agile Multi-Band 24. PCIE9098/SD9098: Packet Coalescing 25. PCIE9098/SD9098: WPA3 embedded 26. PCIE9098/SD9098: Embedded Authenticator 27. PCIE9098/SD9098: Embedded Supplicant 28. SD8987: mDNS offload 29. SD8987: ARP Offload 30. SD8987: mDNS (Bonjour) wake up - Wi-Fi 31. SD8987: IPv6 NS Offload WLAN Bug Fixes: --------------- 1. SD8987: WSW-19887: First SAE commit exchange is not successful when TB STA sends SAE commit msg including APUT's anticlogging token 2. SD8987: WSW-21709: New txpower config not used when receiving new regulatory setting from AP 3. SD8987: WSW-19821: Connection fail about OWE-5.2.4 with wpa_v2.10-M001 4. SD8987: WSW-21085: STAUT is not setting Link Measurement bit in RRM Capabilities in Assoc Request 5. SD8987: WSW-21153: Release fw load fail when load with fw_serial=1 for the second time 6. SD8987: WSW-22107: DUT as Configurator AP configures enrollee as STA Fail 7. SD8801: WCSWREL-302: Enable WLAN time BT time to control GRANT 8. SD8801: WSW-18346: Enable External Coex Feature 9. SD8801: WSW-13649: DUT is not initiating association after succesful SAE authentication 10. SD8801: WSW-11577: STAUT not transmiting SAE confirm message when AP immediately transmits SAE confirm message after sendings it 11. SD8801: WSW-16956: WFA SVD failure fix MM 12. SD8801: WSW-16935: WPA3 R3 Support for MM 13. SD8801: WSW-13637: Rx-AMSDU & Rx-Frag related vulnerability applicability analysis & fixes 14. SD8801: WSW-14117: STA cannot connect with WPA2 AP at the first attempt BT/COEX New Additions/Removals/Improvements: ------------------- 1. PCIE9098/SD9098/SD8987: Wake on BT/BLE (Chip to Host wake up) 2. PCIE9098/SD9098: Dual A2DP (2 Source) 3. PCIE9098/SD9098: Dual A2DP (1 Source + 1 Sink) 4. PCIE9098/SD9098: Dual HFP (1 WBS/1NBS) PCM 5. PCIE9098/SD9098/SD8987: Dual HFP (2 NBS) PCM 6. PCIE9098/SD9098: Support for alternate Codecs (AAC, LDAC) 7. PCIE9098/SD9098: External Coex 8. PCIE9098/SD9098: BCA Time Sharing Coex 9. PCIE9098/SD9098/SD8987: BLE Multi-Adv 10. SD8987: A2DP (SRC + SNK) BT/Co-ex Bug Fixes: ------------------- 1. PCIE9098/SD9098: WSW-17756: Authentication Failure (0x05) is observed for BT connection during LE incoming connection + Bonding 2. PCIE9098/SD9098: WSW-18312: In Obexctl connect command is not working after giving the command for the second time 3. SD8987: WSW-19344: Audio Loss observed for 5-10s in between HFP call after launching "feature_response_flooding" exploiter using Braktooth 4. SD8987: WSW-19674: RX TP is lower than 1Mbps or could hear glitch when testing dual A2DP in open air and shielding room 5. SD8987: WSW-17584: New BLE TCs and failures with TCRL2021-1 and TCRL2021-2 6. SD8987: WSW-17585: New BREDR TCs and failures with TCRL2021-1 and TCRL2021-2 7. SD8987: WSW-19300: DUT hang observed after Severe A2DP Glitches and audio loss while streaming after launching "au_rand_flooding" exploiter using Braktooth 8. SD8987: WSW-19315: Severe A2DP Glitches observed while streaming after launching "invalid_timing_accuracy" exploiter using Braktooth 9. SD8987: WSW-19977: DUT hang observed while streaming A2DP music after launching "invalid_max_slot" exploiter using Braktooth 10. SD8987: WSW-20230: "Command disallowed" issue happens for Batch_scan_data_read command after set batch_scan_mode as 0 in Set_scan_parameter 11. SD8987: WSW-20287: UUT failed to reset after hciattach to 115200 because of unknown HCI command returned when Bluez host send get MWS transport layer configuration command 12. SD8987: WSW-21456: DUT is creating eSCO link even if host rejected second incoming eSCO link request during Dual HFP test 13. SD8987: WSW-20273: WBS sample rate was not set in daemon.conf Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
9d22139131 |
FwImage: update firmware to mxm5x17344.p2
Updated firmware: PCIE-UART W8997 Firmware version 16.92.21.p55.2 SDIO-UART W8997 Firmware version 16.92.21.p55.2 SDIO-UART IW416 Firmware version 16.92.21.p55.1 SDIO-UART W8987 Firmware version 16.92.21.p41.4 Unchanged firmware: SDIO-UART W9098 Firmware version 17.92.1.p116.1 PCIE-UART W9098 Firmware version 17.92.1.p116.1 SDIO-UART W8801 Firmware version 14.92.36.p174 WLAN Bug Fixes: --------------- 1. PCIE8997/SD8997: WSW-21404: Support for SSID field in neighbor request command is not present 2. PCIE8997/SD8997: WSW-19887: WPA3-R3 1st SAE commit (M1) not able to succeed 3. PCIE8997/SD8997: WSW-21196: P2P client disconnect with P2P GO when In-STA connecting to Ex-AP with different P2P GO channel 4. PCIE8997/SD8997: WSW-20725: In-STA don't send association request while setting pscfg DTIM interval from 1 to 3 5. PCIE8997/SD8997: WSW-20061: Duplicate HT/VHT IE seen in beacon of P2P GO 6. IW416: WSW-21196: P2P client disconnect with P2P GO when In-STA connecting to Ex-AP with different P2P GO channel 7. IW416: WSW-20061: Duplicate HT/VHT IE seen in beacon of P2P GO 8. IW416: WSW-19335: RSN Extension IE is not included in Assoc req when AP side does not connect via WPA3 R3 9. IW416: WSW-20788: Radar Detection Probability is below 60% for all ETSI 10. IW416: WSW-21404: Support for SSID field in neighbor request command is not present 11. IW416: WSW-11603: MMH fails to detect Radar signals in JP W56 Region 12. IW416: WSW-12993: DFS Support is required for New JP W53 Radar 13. IW416: WSW-19887: WPA3-R3 1st SAE commit (M1) not able to succeed 14. IW416: WSW-20725: In-STA don't send association request while setting pscfg DTIM interval from 1 to 3 BT/Co-ex Bug Fixes: ------------------- 1. PCIE8997/SD8997: WSW-20601: DUT hang observed after Severe A2DP Glitches and audio loss after launching invalid_max_slot exploiter 2. PCIE8997/SD8997: WSW-19719: LE advertising stopped unexpectedly 3. PCIE8997/SD8997: WSW-20971: DUT won't reply the received 2Mbps LLCP Date length Update Request and stop responding new RX pkt any longer 4. PCIE8997/SD8997: WSW-18231: Not able to get any packet received counts, RSSI, PER information for BT RX and packet received counts for BLE RX 5. SD8987: WSW-20157: DUT assigned same connection Handle to two different LE Remote Devices in dual mode Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
d5c8bd7297 |
FwImage: update firmware to mxm5x17322.p3
Updated firmware: SDIO-UART W9098 Firmware version 17.92.1.p116.1 SDIO-UART W8987 Firmware version 16.92.21.p41.3 SDIO-UART IW416 Firmware version 16.92.21.p41.1 PCIE-UART W9098 Firmware version 17.92.1.p116.1 Unchanged firmware: SDIO-UART W8801 Firmware version 14.92.36.p174 SDIO-UART W8997 Firmware version 16.92.21.p41 PCIE-UART W8997 Firmware version 16.92.21.p26.1 WLAN Bug Fixes: --------------- 1. SD8987: WSW-19750: Fix Low radar detection rate in 20MHz [JP56] 2. SD8987: WSW-19629: Fix Radar dectection rate very low in CH52 for VHT40 [ETSI] 3. SD8987: WSW-19729: Fix Low radar detection rate on some channels in 40MHz [FCC] 4. SD8987: WSW-11606: Fix KCC type 2 low radar detection probability 5. SD8987: WSW-19457: Beacon has duplicate IEs in P2P GO mode 6. PCIE9098: WCSWREL-315: Fixed WOWLAN functionality issue 7. PCIE9098: WSW-19638: Added RF_TEST_MODE support 8. SD9098: WCSWREL-314: Fixed Load_Unload failure for the first iteration 9. SD9098: WSW-19638: Added RF_TEST_MODE support BT/Co-ex Bug Fixes: ------------------- 1. SD8987: WSW-19322: Revert changes done in p41.2 to fix CA2 TCRL2021-2 BQB LMP and BB fail cases 2. SD8987: WSW-20271: Revert changes done in p41.2 to Temporarily disable WARs fixing CSB and sync 3. SD8987: WSW-19977: Hang observed while streaming A2DP music after launching invalid_max_slot exploiter 4. SD8987: WSW-19300: Hang observed after severe A2DP Glitches and audio loss after launching au_rand_flooding exploiter 5. SD8987: WSW-19322: Fix CA2 TCRL2021-2 BQB LMP and BB fail cases 6. SD8987: WSW-20271: Disable WARs fixing CSB and sync train related BQB failures 7. SD8987: WSW-18630: Fixed wifi traffic stuck when running RX and HFP calling 8. SD8987: WSW-17585: New BREDR TCs and failures with TCRL2021-1 and TCRL2021-2 9. SD8987: WSW-19744: DUT is not able to receive any BT RX packets 10. SD8987: WSW-19657: "Invalid HCI Command Parameters" found after enablng the customer-specific batch scan 11. PCIE9098: WSW-17747: Fixed not getting any packet received counts, RSSI, PER information 12. PCIE9098: WSW-17745: Fixed not capturing any packets on IQXeL and Measure tx-power value 13. PCIE9098: WSW-19137: Fixed hang after launching duplicated_encapsulated_payload exploiter 14. PCIE9098: WSW-16828: Fixed AES failing issue even after enabling AES using VSC 15. PCIE9098: WSW-19142: Fixed Pair/Connect issue when exploiter paging_scan_disable is launched 16. PCIE9098: WSW-19145: Fixed HFP Glitches and Connection-timeout after launching invalid_feature_page_execution 17. PCIE9098: WSW-20002: Fixed RX data lost issue for BT RX Throughput transfer 18. PCIE9098: WSW-19523: Fixed deauth on MAC2 resulting in a hang during Coex scenario 19. SD9098: WSW-17747: Fixed not getting any packet received counts, RSSI, PER information 20. SD9098: WSW-17745: Fixed not capturing any packets on IQXeL and Measure tx-power value 21. SD9098: WSW-19137: Fixed hang after launching duplicated_encapsulated_payload exploiter 22. SD9098: WSW-16828: Fixed AES failing issue even after enabling AES using VSC 23. SD9098: WSW-19142: Fixed Pair/Connect issue when exploiter paging_scan_disable is launched 24. SD9098: WSW-19145: Fixed HFP Glitches and Connection-timeout after launching invalid_feature_page_execution 25. SD9098: WSW-20002: Fixed RX data lost issue for BT RX Throughput transfer 26. SD9098: WSW-19523: Fixed deauth on MAC2 resulting in a hang during Coex scenario 27. IW416: WSW-19098: New BREDR TCs and failures with TCRL2021-2, E17535 28. IW416: WSW-19212: Not able to get any packet received counts, RSSI, PER information for BT RX 29. IW416: WSW-19476: Not able to Pair/Connect the REF device when exploiter "paging_scan_disable" is launched 30. IW416: WSW-19474: DUT hang observed after launching "feature_req_ping_pong" exploiter Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
03975c5dc8 |
FwImage: update firmware to mxm5x17322
Updated firmware: SDIO-UART W9098 Firmware version 17.68.1.p116 SDIO-UART W8987 Firmware version 16.92.21.p41 SDIO-UART W8801 Firmware version 14.92.36.p174 SDIO-UART IW416 Firmware version 16.92.21.p41 PCIE-UART W9098 Firmware version 17.68.1.p116 SDIO-UART W8997 Firmware version 16.92.21.p41 Unchanged firmware: PCIE-UART W8997 Firmware version 16.92.21.p26.1 WLAN Bug Fixes: --------------- 1. SD9098: WSW-17876: RF Test Mode: After Disabling cont_mode(CMD18_CW=1), Firmware is getting crashed if radio mode is changed 2. SD9098: WSW-9362: EU-CERT: COT and Channel Access Mechanism tests failing with OptionA Procedure 3. SD8987: WSW-18878: WPA2-PSK Roaming failed 4. SD8987: WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. SD8987: WSW-16412: Enable 2.4GHz 40MHz bandwidth support for V16 devices 6. SD8987: WSW-18454: Added 802.11k suppor 7. SD8987: WSW-18455: Added 802.11v support 8. SD8987: WSW-18456: Added 802.11r (STA Roaming) support 9. SD8987: WSW-18457: Added 802.11z (Host based TDLS) support 10. SD8987: WSW-18459: DFS (Radar Detection) Master support (some known issues in specific config are found, and under debugging) 11. SD8987: WSW-18461: Per-path regulatory power table (Tested only with RD Board) 12. SD8987: WSW-18462: Per-path DPD Calibration Front-end Loss (Tested only with RD Board) 13. SD8987: WSW-18463: Antenna diversity (Tested only with RD Board) 14. SD8801: WSW-16811: Fix scan cmd timeout issue 15. IW416: WSW-19214: get link layer statistic fail, CMD_RESP: cmd 0x256 error 16. IW416: WSW-16412: Enable 2.4GHz 40MHz bandwidth support for V16 deviceS 17. IW416: WSW-17096: Wi-Fi BGN(2.4Ghz) Association failure issue 18. IW416: WSW-17705: IW416 Wlan Spurious emission issue 19. IW416: WSW-17552: Channel Occupancy Time (COT) failure in STA mode. Max. COT for HT20/MCS0 in 5G mode should be < 6 ms, but observed value is 6.081 ms 20. PCIE9098: WSW-12608: Optimize moal driver loading via firmware init time optimization 21. PCIE9098: WSW-9362: EU-CERT: COT and Channel Access Mechanism tests failing with OptionA Procedure 22. SD8997: WSW-16427: Wi-Fi throughput drops to 0 during scan 23. SD8997: WSW-16819: Wi-Fi occurs 0xa4 command timeout with reason code 12 while playing online video about 16 hours 24. SD8997: WSW-17573: Android UI can't display Wi-Fi standard correctly BT/Co-ex Bug Fixes: ------------------- 1. SD9098: WSW-17745: RF Test Mode: Not able to capture packets on IQXeL and Measure tx-power value is approx. -42dBm for configured power 4dBm for BLE 2. SD9098: WSW-17747: Not able to get any packet received counts, RSSI, PER information for BT RX 3. SD9098: WSW-18470: Deauthentication on MAC2 and further causing hang issue without ps_mode and auto_ds load parameters 4. SD8987: WSW-18517: 7-8 Glitches are observed during the A2DP SRC streaming + BT Inquiry 5. SD8987: WSW-18598: BT On/Off cycle fails with InBand IR 6. SD8987: Independent Reset via In-band for BT and Wi-Fi(NOTE: This feature needs separate BT Only and WLAN Only firmware binaries, which are provided in this release) 7. IW416: WSW-9978: BLE Qualification protocol failures 8. IW416: WSW-13613: eSCO connection is accepted with retransmission window 0x06 9. IW416: WSW-10265: More than expected channels getting blocked in case of STA + BT Internal AFH 10. PCIE9098: WSW-17745: RF Test Mode: Not able to capture packets on IQXeL and Measure tx-power value is approx. -42dBm for configured power 4dBm for BLE 11. PCIE9098: WSW-17747: Not able to get any packet received counts, RSSI, PER information for BT RX 12. SD8997: WSW-16022: Low 2.4GHz Wi-Fi throughput in Wi-Fi/A2DP Coex case when AP RSSI is weak 13. SD8997: WSW-16243: Hardware Error(0x23) occured during A2DP streaming 14. SD8997: WSW-17570: There is 8s+ delay in waking up OTT host from RCU after host enters into sleep 15. SD8997: WSW-16820: BLE_HID fails to Pair while performing HFP Skype call[Page Timeout: 20sec] 16. SD8997: WSW-18095: Low TP observed in STA(VHT80) WiFi RX Traffic in Coex scenario with INQUIRY/LE_SCAN/A2DP SRC 17. SD8997: WSW-17479: Google Voice Assistant can't be used 18. SD8997: WSW-19097: A2DP glitch in long distance test Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
6c1841976a |
FwImage: update firmware to mxm5x17299.p1
Updated firmware: SDIO-UART W9098 Firmware version 17.92.1.p98.1 PCIE-UART W8997 Firmware version 16.92.21.p26.1 SDIO-UART W8987 Firmware version 16.92.21.p26 Unchanged firmware: SDIO-UART W8801 Firmware version 14.92.36.p171 SDIO-UART IW416 Firmware version 16.92.21.p11.2 PCIE-UART W9098 Firmware version 17.92.5.p11 SDIO-UART W8997 Firmware version 16.92.10.p219.5 WLAN Bug Fixes: --------------- 1. SD9098: WSW-17752: [RF-Test Mode]: for "wlan_set_rf_tx_frame"(CMD35), Measured spectrum BW remains 20MHz even when configured BW is 40/80MHz 2. SD9098: WSW-17538: STAUT is not sending SA Query Response to AP's correctly protected SA Query Request 3. SD9098: WSW-17754: "wlan_set_rf_tx_frame"(CMD35), Not able to receive any packets on IQXeL for HE-SU MCS10 & MCS 11 1ss and 2ss data rates 4. SD9098: WSW-18149: Fix for default 2G TxPwrTbl does not show 8dBm for all mod indices 5. SD9098: WSW-14255: DUT goes into hang state during re-association by changing channel/restarting Ex-AP 6. SD9098: WSW-14386: TCP Uplink Traffic on P2P-GO and BSS Start Stop fails after 3hours; Timeout cmd id 0x0 7. SD9098: WSW-11201: Host Wakeup for Management Frames in AP Mode fails, when APUT configured with "mgmtfilter" 8. SD9098: WSW-14213: TCP/UDP Bidirectional traffic test does not sustain more than 3 hours 9. SD9098: WSW-14215: TCP Uplink stress fails with dump within 3hours duration 10. SD9098: WSW-14459: TCP/UDP Bidirectional traffic test does not sustain more than 10mins; cmd53 error is seen 11. SD9098: WSW-14594: uap0 is unable send traffic with all Fixrate LTF+GI combinations 12. SD9098: WSW-15600: Country IE is seen in beacon, even after disabling 80211d option in hostapd file 13. SD9098: WSW-17616: Default tx-power values (8dBm) are changing to some random values for different rate ID’s after starting hostapd 14. PCIE8997: WSW-16427: Fixed issue of Wi-Fi throughput drops to 0 during scan 15. PCIE8997: WSW-16819: Fixed issue of 0xa4 command timeout with reason code 12 while playing online video about 16 hours 16. PCIE8997: WSW-17568: Fixed issue of "Ext scan enh timeout" occurs after connect to IPv6 network for a long time 17. PCIE8997: WSW-17573: Fixed issue of Android UI not displaying Wi-Fi standard correctl 18. PCIE8997: WSW-17613: 0x107 command timeout occurs while playing online video based on IPv6 network for a long time 19. PCIE8997: WSW-17657: In-STA auto disconnects from Ex-AP in standby and is unable to reconnect Ex-AP 20. SD8987: WSW-17426: rf test mode: 5G Tx EVM/SPECTRUM MASK failed on CH64 and CH100 with mass market release 21: SD8987: WSW-17577: RF test mode bandwidth 40MHz not working with 2.4G band 22. SD8987: WSFD-386: FW and VHAL Implementation for WOWLAN 23. SD8987: WSW-15035: Fixed WiFi scan event timeout happen during run WiFi scan and BT connect-disconnect cycle test simultaneously sometimes 24. SD8987: WSW-16212: Fixed fw init fail with 0xf007 when independent reset and STA keep connection 25. SD8987: WSW-17450: Fixed the issue of android.net.wifi.cts.WifiManagerTest failure BT/Co-ex Bug Fixes: ------------- 1. SD9098: WSW-17662: Fixed the issue of Link Loss(Connection Timeout) during LE Connectio 2. SD9098: WSW-17667: Wlan Deauthentication is observed with A2DP Source + STA[HT20] with DUT ACL Role both Slave and Master 3. SD9098: WSW-17619: Authentication Failure is observed when try to connect with DUT after Power on/off 4. SD9098: WSW-17887: During encryption process if host send remote version request, sometimes link is getting disconnected with LMP/LL timeout 5. SD9098: WSW-17982: After making call, Synchronous Connect Complete returns with status Unsupported LMP Parameter Value / Unsupported LL Parameter Value (0x20) 6. SD9098: WSW-17249: Random DUT hang observed after receiving directed advertisements while doing le scan 7. SD9098: WSW-16606: Low BT Tx/Rx/Bi-Directional TP on BT(M/S) for 1/3/5 Slot packet type 8. SD9098: WSW-13135: Throughput Drops abruptly in OPP_Tx to 8/16KBps from 64KBps when OPP_Tx is operating and simultaneously TCP_RX is running 9. PCIE8997: WSW-17982: After making call, Synchronous Connect Complete returns with status Unsupported LMP Parameter Value / Unsupported LL Parameter Value (0x20) 10. PCIE8997: WSW-17383: Request to enable Multi ADV feature to pass GTV Certification 11. PCIE8997: WSW-17479: Fixed issue of Google Voice Assistant usage 12. PCIE8997: WSW-17570: Fixed issue of 8s+ delay in waking up OTT host from RCU after host enters into sleep 13. PCIE8997: WSW-16306: Fixed issue of Low BT Tx/Rx throughput observed for all packet types in shielded environment 14. PCIE8997: WSW-18095: Fixed issue of Low TP observed in STA(VHT80) WiFi RX Traffic in Coex scenario with INQUIRY/LE_SCAN/A2DP SRC 15. SD8987: WSW-16820: BLE_HID fails to Pair while performing HFP Skype call 16. SD8987: WSW-16922: PTS Flouride Certification got failure for HSP/AG/IAC/BV-01-I 17. SD8987: WSW-16422: Set Random Private Address Timeout Command is accepting values more than 1 Hr 18. SD8987: WSW-16780: Bad and distorted voice quality can be heard from remote phone if we do connect and disconnect test with headset no matter incoming or outgoing call 19. SD8987: WSW-16924: Ctlr H/w error event showed when connect with Pixel Buds Version2 20. SD8987: WSW-15505: Heavy A2DP glitches can be heard in the noisy ENV if take speaker ~10meter away from UUT 21. SD8987: WSW-17237: LE_APCF_Command received from BT stack, 8987 return as dis-allowed 22. SD8987: WSW-16266: BLE devices failed to be connected during BT activities like HFP active call 23. SD8987: WSW-17034: No BT inquiry result found during PS4 gamepad pair/unpair test with A2DP streaming and BLE RC connected 24. SD8987: WSW-17423: Voice not hearable from both headset and phone sides when make the HFP call with NBS mode 25. SD8987: WSW-17476: Random A2DP glitches can be heard during A2DP playing with PixelBuds headset in the Noisy ENV 26. SD8987: WSW-16170: Read By Group Type Response is not being sent by the DUT due to collision between Public key request 27. SD8987: WSW-16438: WiFi hang up with command timeout(0x24) during running BT OOB IR or A2DP stress test and wifi do activity 28. SD8987: WSW-15570: A2DP glitch with wifi connected and do scan or Traffic running in noisy when testing A2DP+STA and A2DP+BLE RC+STA 29. SD8987: WSW-17664: BLE Fast Pair Doesnt Work as per expectation 30. SD8987: WSW-17325: DUT does not respond to POLL packets send by Remote Device due to which Connection terminates with "Connection timeout" 31. SD8987: WSW-17256: LE Create Connection with use white list for 2nd link is connected with wrong BD address Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
a312213179 |
FwImage: update firmware to mxm5x17283.p2
Firmware: SDIO-UART W8801 Firmware version 14.92.36.p171 SDIO-UART IW416 Firmware version 16.92.21.p11.2 PCIE-UART W9098 Firmware version 17.92.5.p11 SDIO-UART W8997 Firmware version 16.92.10.p219.5 PCIE-UART W8997 Firmware version 16.92.10.p213.4 SDIO-UART W8987 Firmware version 16.92.21.p11.1 WLAN Bug Fixes: --------------- 1. PCIE8997: Fixed issue with 5G start when sae_pwe=1 is set 2. PCIE8997: Added WPA3 R3 Support 3. PCIE9098: Fixed issue with 5G start when sae_pwe=1 is set 4. PCIE9098: Added WPA3 R3 Support 5. SD8801: Fixed issue with 5G start when sae_pwe=1 is set 6. SD8801: Added WPA3 R3 Support 7. SD8987: Fixed issue with 5G start when sae_pwe=1 is set 8. SD8987: Addressed Ideal period probability cert test failure in MMH 5GHz HT20 mode 9. SD8987: Added FW and VHAL implementation for WoWLAN 10. SD8987: Added WPA3 R3 Support 11. SD8997: Fixed issue with 5G start when sae_pwe=1 is set 12. SD8997: Added WPA3 R3 Support 13. SDIW416: Fixed issue with 5G start when sae_pwe=1 is set 14. SDIW416: Addressed Ideal period probability cert test failure in MMH 5GHz HT20 mode 15. SDIW416: Added WPA3 R3 Support BT Bug Fixes: ------------- 1. PCIE8997: Added an update to the 'Impersonation in the Passkey Entry Protocol' Vulnerability (original CVE-2020-26558) 2. PCIE8997: Added BT ANSSI VU fix 3. PCIE9098: Added an update to the 'Impersonation in the Passkey Entry Protocol' Vulnerability (original CVE-2020-26558) 4. PCIE9098: Added BT ANSSI VU fix 5. SD8987: Added an update to the 'Impersonation in the Passkey Entry Protocol' Vulnerability (original CVE-2020-26558) 6. SD8987: Fixed issue of Set Random Private Address Timeout Command accepting values more than 1 Hr 7. SD8987: Added BT ANSSI VU fix 8. SD8997: Added an update to the 'Impersonation in the Passkey Entry Protocol' Vulnerability (original CVE-2020-26558) 9. SD8997: Added BT ANSSI VU fix 10. SDIW416: Added an update to the 'Impersonation in the Passkey Entry Protocol' Vulnerability (original CVE-2020-26558) 11. SDIW416: Fixed issue of Set Random Private Address Timeout Command accepting values more than 1 Hr 12. SDIW416: Added BT ANSSI VU fix 13. SDIW416: More than expected channels getting blocked in case of STA + BT internal AFH Yocto build, it requires to copy the files to: - lib/firmware/nxp/ Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
f179573c8c |
FwImage: update firmware to mxm5x17283
Firmware: SDIO-UART W8801 Firmware version 14.92.36.p170 SDIO-UART IW416 Firmware version 16.92.21.p11 PCIE-UART W9098 Firmware version 17.92.5.p10 SDIO-UART W8997 Firmware version 16.92.10.p219.4 PCIE-UART W8997 Firmware version 16.92.10.p213.3 SDIO-UART W8987 Firmware version 16.92.21.p11 WLAN Bug Fixes: --------------- 1. PCIE8997: Fixed pre-cert issue where STA is responding to the ARP requests after receiving encrypted M3 and reset PN from AP 2. PCIE8997: Added WFA SVD failure fixes 3. PCIE9098: Fixed pre-cert issue where STA is responding to the ARP requests after receiving encrypted M3 and reset PN from AP 4. PCIE9098: Added WFA SVD failure fixes 5. SD8801: Fixed low TCP RX throughput issue For Linksys 1900AC AP 6. SD8801: Corresponding firmware change for fixing low throughput issue in WPA3-SAE security 7. SD8801: Enabled ED-MAC by default 8. SD8801: Fixed low throughput in Rx A-MSDU 9. SD8801: Fixed low throughput issue in P2P GC 10. SD8801: Added WFA SVD failure fixes 11. SD8987: Added WFA SVD failure fixes 12. SD8987: Minor generic bug fixe 13. SD8987: Fixed RF test mode "Continuous Transmit Test" error happened on the second time test 14. SD8987: Fixed Low TCP-Tx and UDP-Tx throughput issues 15. SD8997: Fixed pre-cert issue where STA is responding to the ARP requests after receiving encrypted M3 and reset PN from AP 16. SD8997: Added WFA SVD failure fixes 17. SDIW416: Added WFA SVD failure fixes 18. SDIW416: Minor generic bug fixes BT Bug Fixes: ------------- 1. SD8987: Minor generic bug fixe 2. SD8987: Fixed FW replying with different reason when the Host has rejected the incoming call 3. SD8987: Fixed Outgoing connection disconnection with reason "Connection terminated by local host" after pairing with reference device 4. SDIW416: Fixed an issue with retransmission window during eSCO connection accept 5. SDIW416: Continuous A2DP-SNK audio glitches issue observed in MMH Rx traffic Yocto build, it requires to copy the files to: - lib/firmware/nxp/ Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
df6ba6bd59 |
FwImage: update firmware to mxm5x17266.p3
Firmware: SDIO-UART IW416 Firmware version 16.92.10.p233.2 PCIE-UART W9098 Firmware version 17.92.5.p9 SDIO-UART W8997 Firmware version 16.92.10.p219.2 PCIE-UART W8997 Firmware version 16.92.10.p213.2 SDIO-UART W8987 Firmware version 16.92.10.p210.1 WLAN Bug Fixes: --------------- 1. IW416: Fixed the issue of Channel Occupancy Time (COT) coming as 7.85 msec where as it should be under 6 msec 2. SDIO8997: Fixed issue of ping through gateway for some minutes when running long time test 3. SDIO8997: Added 2.4GHz 40MHz bandwidth support for V16 devices 4. PCIE8997: Fixed issue of ping through gateway for some minutes when running long time test 5. PCIE8997: Added 2.4GHz 40MHz bandwidth support for V16 devices BT Bug Fixes: ------------- 1. IW416: Fixed the issue of DUT blocking more than 50/55 channels in shielded environment without any external noise 2. IW416: Fixed the issue of Continuous A2DP-SNK audio glitches in Rx traffic 3. PCIE9098: Fixed the scan on fail as Command Disallowed is observed for LE Set Extended Scan Parameters 4. SDIO8997: Hardware Error(0x23) occured during A2DP streaming 5. PCIE8997: Hardware Error(0x23) occured during A2DP streaming Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
20290c2aa5 |
FwImage: update firmware to mxm5x17266.p2
Firmware: SDIO-UART IW416 Firmware version 16.92.10.p233.1 PCIE-UART W9098 Firmware version 17.92.5.p8 SDIO-UART W8997 Firmware version 16.92.10.p219.1 PCIE-UART W8997 Firmware version 16.92.10.p213.1 SDIO-UART W8987 Firmware version 16.92.10.p210.1 WLAN Bug Fixes: --------------- 1. IW416: [WCSWREL-100] L5.4.70: 2.4G AP connect fail after run 5G STA mode 2. IW416: Fixed BSS start/stop stress test failed with 0x10d cmd timeout 3. PCIE9098: Continuous association with 5 different APs stress fails 4. PCIE9098: DUT is unable to receive packets in MFG mode 5. PCIE9098: Command timeout 0x107 observed while running Tx UDP traffic to two stations with scan triggered for every 30s in background 6. SDIO8997: [WCSWREL-100] L5.4.70: 2.4G AP connect fail after run 5G STA mode 7. PCIE8997: [WCSWREL-100] L5.4.70: 2.4G AP connect fail after run 5G STA mode 8. SDIO8987: [WCSWREL-100] L5.4.70: 2.4G AP connect fail after run 5G STA mode BT Bug Fixes: ------------- 1. IW416: Command tx timeout as soon as advertise on/off is done in a loop 2. IW416: Fixed the error "connection rejected due to security reasons" during lescan and file transfer 3. IW416: Fixed the Type1XK_Adaptivity failure 4. IW416: Fixed the LE link disconnection with "Connection Timeout" 5. IW416: Fixed the “Authentication Failure” issue found during BT E0/AES connection process 6. IW416: [WCSWREL-136]cannot hear voice from BT HFP call with IW416 on both imx8mq and imx8mp 7. IW416: Disable AES feature support due to known issue 8. PCIE9098: Disabled LE Extended ADV, periodic ADV & Channel Selection Algorithm 9. PCIE9098: Disable AES feature support due to known issue 10. SDIO8997: Fixed the low 2.4GHz Wi-Fi throughput in Wi-Fi/A2DP Coex case when AP RSSI is weak 11. SDIO8997: Fixed the Low TP ~400Kbps issue during STA_2.4GHz_A2DP_SRC/SNK_UDP_RX 12. SDIO8997: Disable AES feature support due to known issue 13. PCIE8997: Disable AES feature support due to known issue 14. SDIO8987: Fixed the Issue of Controller not sending "LE create connection" command into air 15. SDIO8987: [WCSWREL-147] Bluetooth will crash and restart fail in stress test 16. SDIO8987: Disable AES feature support due to known issue Yocto build, it requires to copy the files to: - lib/firmware/nxp/ Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
648018f14a |
FwImage: update firmware to mxm5x17266
Firmware: SDIO-UART IW416 Firmware version 16.92.10.p177 PCIE-UART W9098 Firmware version 17.92.5.p6 SDIO-UART W8997 Firmware version 16.92.10.p219 PCIE-UART W8997 Firmware version 16.92.10.p213 SDIO-UART W8987 Firmware version 16.92.10.p210 WLAN Bug Fixes: --------------- 1. PCIE9098: TCP Uplink Traffic Test on P2P-GO and BSS Start Stop stress fails within 1hour 2. PCIE9098: Suspend-Resume fails in connected state 3. PCIE9098: ED-Mac is not enabled by default 4. PCIE9098: EU-Cert is getting failed for 2.4G in mlan0 interface in STA mode BT Bug Fixes: ------------- 1. SDIO8997: Low TP ~30Kbps is observed during [STA_2.4GHZ_A2DP_SRC/SNK_TCP_TX] Yocto build, it requires to copy the files to: - lib/firmware/nxp/ Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
f69b5a1d5c |
FwImage: update firmware to mxm5x17247.p5
Firmware: PCIE-UART W9098 Firmware version 17.92.5.p3 SDIO-UART W8997 Firmware version 16.92.10.p218 PCIE-UART W8997 Firmware version 16.92.10.p213 SDIO-UART W8987 Firmware version 16.92.10.p210 WLAN Bug Fixes: --------------- 1. PCIE9098: Fixed pre-cert issues 2. PCIE9098: Added a workaround for suspend-resume issue 3. SDIO8997: Fixed low throughput issues during Coex mode 4. SDIO8997: Fixed audio glitches issue during Coex mode BT Bug Fixes: ------------- 1. PCIE9098: Fixed device hang issue during suite validation 2. PCIE9098: Added BT VU fixes 3. PCIE8997: Fixed device hang issue during suite validation 4. PCIE8997: Added BT VU fixes 5. SDIO8987: Added BT VU fixes Yocto build, it requires to copy the files to: - lib/firmware/nxp/ Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
c314d501bd |
FwImage: update firmware to mxm5x17247.p1
Firmware: PCIE-UART W9098 Firmware version 17.92.5.p1 SDIO-UART W8997 Firmware version 16.92.10.p216 PCIE-UART W8997 Firmware version 16.92.10.p212 SDIO-UART W8987 Firmware version 16.92.10.p209 WLAN Bug Fixes: --------------- 1. PCIE9098: Fixed issues seen during stress test with data traffic. BT Bug Fixes: ------------- None. Yocto build, it requires to copy the files to: - lib/firmware/nxp/ Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
aa62e6e688 |
FwImage: update firmware to mxm5x17247
Firmware: PCIE-UART W9098 Firmware version 17.92.1.p55 SDIO-UART W8997 Firmware version 16.92.10.p156 PCIE-UART W8997 Firmware version 16.92.10.p212 SDIO-UART W8987 Firmware version 16.92.10.p209 WLAN Bug Fixes: --------------- 1. Added Wi-Fi VU fixes for four firmwares 2. PCIE9098: Fixed 11AX pre-cert/EU-cert test issues 3. PCIE9098: Fixed DFS channel switch compliance related issue 4. PCIE9098: Fixed WPA3 band switch issue 5. PCIE9098: Fixed issues related to scan stress 6. PCIE9098: Fixed issues seen during traffic stress test 7. SDIO8997: Fixed issues seen during traffic stress test BT Bug Fixes: ------------- 1. PCIE9098: Fixed various issues related to device hang 2. PCIE9098: Fixed issues with BT mode switch Yocto build, it requires to copy the files to: - lib/firmware/nxp/ Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
Fugang Duan
|
620e3e7c06 |
FwImage: update firmware to mxm5x16203
Firmware:
PCIE-UART W8997 Firmware version 16.92.10.p110
SDIO-UART W8987 Firmware version 16.92.10.p208
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
|
||
|
Fugang Duan
|
484d38224f |
FwImage_8987: update 88w8987 firmware to mxm4x17186.p7
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p207_16.92.10.p207
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-NXP-WIFI-FP92-BT-FP92-LINUX-ANDROID-MXM4X17186.p7-MGPL.git
Firmware version 16.92.10.p207
Firmware updates:
WLAN Bug Fixes:
===============
1. Fixed WLAN hang issue which was observed during HFP + STA scenario during TCP Tx
BT Bug Fixes:
=============
1. Corrected feature bit advertising to disable AES completely,
which was causing pairing / connection failure
2. For PHY, if asymmetric traffic is used, then corrected the
handling to post error code as per spec
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
|
||
|
Fugang Duan
|
63e8454ee3 |
FwImage_8987: update 88w8987 firmware to mxm4x17186.p6
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p206_16.92.10.p206
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-NXP-WIFI-FP92-BT-FP92-LINUX-ANDROID-MXM4X17186.p6-MGPL.git
Firmware version 16.92.10.p206
Firmware updates:
WLAN Bug Fixes:
===============
1. Fixed WLAN link loss which was observed in MMH scenario some time
after inquiry was started
2. Test Mode: Fixed cw mode power delta issue which was seen in configured
Vs measured Tx power value as part of this command
BT Bug Fixes:
=============
1. Fixed the issue of A2DP link loss that was observed due to
connection timeout (0x08)
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
|
||
|
Fugang Duan
|
edadeaea32 |
FwImage_8987: update 88w8987 firmware to mxm4x17186.p4
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p204_16.92.10.p204
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-NXP-WIFI-FP92-BT-FP92-LINUX-ANDROID-MXM4X17186.p4-MGPL.git
Firmware updates:
New Additions:
==============
1. Update Tx continuous mode logic for test mode
WLAN Bug Fixes:
===============
1. Fixed WLAN deauth which was observed during wlan traffic in presence
of BT Inquiry, Inquiry scan or Paging on android console
2. Fixed issue of P2P Group Owner not sending QoS Null Frame to Station
3. Solved the issue while reconnecting to AP after channel switch in 5GHz
band for 40MHz/80MHz channel bandwidth
4. Addressed the issue for Roaming from AP1 to AP2 which was failing
using wpa_cli roam command in 5GHz band for 40MHz/80MHz channel bandwidth
BT Bug Fixes:
=============
1. Invalid / garbage data was observed in Test mode during BT RF testing
2. Made changes to set default PCM configuration settings in firmare
3. Disabled CS2 and Adv Ext features for MM release
4. BLE qualification related fixes
5. Fixed issue where controller was giving incorrect error code,
Corrected the error code per spec
6. Added fix of setting correct values for default parameter length when
DLE (Data Length Extension) is enabled with LR (Long Range) disabled
7. Added change to restrict Wesco to 4 for single slot EV packets
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
|
||
|
Fugang Duan
|
d19e656a4d |
FwImage_8987: update 88w8987 firmware to mxm4x17186.p2
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p202_16.92.10.p202
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-nxp-wifi-fp92-bt-fp92-linux-android-mxm4x17186.p2-mgpl.git
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
|
||
|
Fugang Duan
|
7c32c8ee57 |
FwImage_8987: update 88w8987 firmware to mxm4x17186
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p99_16.85.10.p99
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-nxp-wifi-fp92-bt-fp85-linux-android-mxm4x17186-mgpl.git
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
|
||
|
Fugang Duan
|
0603c28357 |
FwImage_8987: update 88w8987 firmware
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p80_16.85.10.p80
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-nxp-wifi-fp92-bt-fp85-linux-android-mxm4x17175-mgpl.git
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
|
||
|
Fugang Duan
|
8a185c8007 |
FwImage_8987: add 88w8987 firmware
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p73
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-nxp-wifi-fp92-bt-fp85-linux-android-mxm4x17169-gpl.git
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
|