99 lines
3.1 KiB
Markdown
99 lines
3.1 KiB
Markdown
`umockdev` Tests
|
|
================
|
|
`umockdev` tests use fingerprint devices mocked by [`umockdev`
|
|
toolchain][umockdev].
|
|
|
|
This document describes how to create a 'capture' test: a test that
|
|
captures a picture of a fingerprint from the device (mocked by
|
|
`umockdev`) and compares it with the standard one.
|
|
|
|
Other kinds of `umockdev` tests could be created in a similar manner.
|
|
|
|
|
|
'Capture' Test Creation
|
|
-----------------------
|
|
A new 'capture' test is created by means of `capture.py` script:
|
|
|
|
1. Create (if needed) a directory for the driver under `tests`
|
|
directory:
|
|
|
|
`mkdir DRIVER`
|
|
|
|
2. Prepare your execution environment.
|
|
|
|
In the next step a working and up to date libfprint is needed. This can be
|
|
achieved by installing it into your system. Alternatively, you can set
|
|
the following environment variables to run a local build:
|
|
- `export LD_PRELOAD=<meson-build-dir>/libfprint/libfprint-2.so`
|
|
- `export GI_TYPELIB_PATH=<meson-build-dir>/libfprint`
|
|
|
|
Also, sometimes the driver must be adapted to the emulated environment
|
|
(mainly if it uses random numbers, see `synaptics.c` for an example).
|
|
Set the following environment variable to enable this adaptation:
|
|
- `export FP_DEVICE_EMULATION=1`
|
|
|
|
Run the next steps in the same terminal.
|
|
|
|
3. Find the real USB fingerprint device with `lsusb`, e.g.:
|
|
|
|
`Bus 001 Device 005: ID 138a:0090 Validity Sensors, Inc. VFS7500 Touch Fingerprint Sensor`
|
|
|
|
The following USB device is used in the example above:
|
|
`/dev/bus/usb/001/005`.
|
|
|
|
For the following commands, it is assumed that the user that's
|
|
running the commands has full access to the device node, whether
|
|
by running the commands as `root`, or changing the permissions for
|
|
that device node.
|
|
|
|
4. Record information about this device:
|
|
|
|
`umockdev-record /dev/bus/usb/001/005 > DRIVER/device`
|
|
|
|
5. Record interaction of `capture.py` (or other test) with the device:
|
|
|
|
`umockdev-record -i /dev/bus/usb/001/005=DRIVER/capture.ioctl -- python3 ./capture.py DRIVER/capture.png`
|
|
|
|
Files `capture.ioctl` and `capture.png` will be created as the
|
|
result of this command.
|
|
|
|
6. Add driver's name to `drivers_tests` in the `meson.build`.
|
|
7. Check whether everything works as expected.
|
|
|
|
**Note.** To avoid submitting a real fingerprint, the side of finger,
|
|
arm, or anything else producing an image with the device can be used.
|
|
|
|
|
|
Possible Issues
|
|
---------------
|
|
`umockdev-record` aggressively groups URBs. In most cases, manual
|
|
intervention is unfortunately required. Often, drivers do a chain of
|
|
commands like: A then B each with a different reply. However,
|
|
`umockdev-record` could create a file like this:
|
|
|
|
A
|
|
reply 1
|
|
reply 2
|
|
B
|
|
reply 1
|
|
reply 2
|
|
|
|
In that case, records must be re-ordered:
|
|
|
|
A
|
|
reply 1
|
|
B
|
|
reply 1
|
|
A
|
|
reply 2
|
|
B
|
|
reply 2
|
|
|
|
Other changes may be needed to get everything working. For example the
|
|
`elan` driver relies on a timeout that is not reported correctly. In
|
|
this case the driver works around it by interpreting the protocol
|
|
error differently in the virtual environment (by means of
|
|
`FP_DEVICE_EMULATION` environment variable).
|
|
|
|
|
|
[umockdev]: https://github.com/martinpitt/umockdev
|