This driver has a rather odd state machine and also used to mess iwth
the internal state of the image device. This code has been removed, but
is untested unfortunately due to a lack of hardware.
Most likely, this driver is not quite functional currently.
This is a rewrite of the core based on GObject and Gio. This commit
breaks the build in a lot of ways, but basic functionality will start
working again with the next commits.
Apply the previously added spatch/coccinell file to replace all
free/malloc/realloc calls with g_free/g_malloc/g_realloc. It also removes
all the error code paths that we do not need to check anymore.
This means that the returned data must be free'ed using g_free rather
than free, making memory management more consistent.
Add an spatch/coccinelle file to replace all free/malloc/realloc calls
with g_free/g_malloc/g_realloc. It also removes all the error code paths
that we do not need to check anymore.
We will use GUsb rather than libusb directly in the future. This should
simplify a lot of the integration work and changes such as supporting
hotplugging. It will also require quite a lot of internal changes.
If one of the callbacks called from fpi_imgdev_deactivate_complete()
was reactivating the device, then we would be overwriting whichever
"action" got set in the callback, leading to
fpi_imgdev_activate_complete() failing as it doesn't handle the "none"
action.
Reset the action before calling the callbacks.
If a USB transfer is started but not completed in one go, the wdata we
pass to continue_write_regv() will already be freed by the time we try
to use it again.
Only free() the wdata on error, or when the USB transfer is completed.
Closes: #180
The state was always AWAIT_FINGER and it was never used by any driver
(except for error checking). So remove it, in particular as a correct
state change will be done after activation anyway.
The only driver with code that actually did anything based on this was
the URU4000 driver. However, all it did was an explicit state change
execution. This is not necessary, as the state_change handler is called
anyway (i.e. we now only write the AWAIT_FINGER register once rather
than twice).
Manual changes plus:
@ init @
identifier driver_name;
identifier activate_func;
@@
struct fp_img_driver driver_name = {
...,
.activate = activate_func,
...,
};
@ remove_arg @
identifier dev;
identifier state;
identifier init.activate_func;
@@
activate_func (
struct fp_img_dev *dev
- , enum fp_imgdev_state state
)
{
<...
- if (state != IMGDEV_STATE_AWAIT_FINGER_ON) { ... }
...>
}
The driver was never ported to the new asynchronous model, meaning it
has been defunct since some time in 2008. Remove the driver, as
seemingly no one has complained about this and we have no proper way to
even verify a port is correct.
The upekts driver needs upek_proto.c while the upektc driver does not.
Move the corresponding source file entries so that both drivers compile
standalone.
The only API user currently seems to be the examples. fprintd has its
own storage and that will be a good idea in general.
So deprecate the API, we'll need to find a different solution for the
examples eventually.
The function was committed by accident as part of commit d18e1053
(lib: Add a way to name timeouts). It is not used anywhere and
fpi_timeout_cancel_all_for_dev exists, is exported and used and serves
the same purpose.
If users put their finger on the sensor between the bulge and
"un-bulge" area first and then swipe, the captured image would
be bad.
Skipping more frames can reduce the impact, so bump
ELAN_SKIP_LAST_FRAMES to 2.
Check for the mean calibration being outside of range to know whether we
require a recalibration. Continue with the usual checks if the
calibration value is within range.
The dimensions some sensors return is the maximum zero-based index
rather than the number of pixels. Assuming every sensor has an
even number of pixels is safe.
This commit fixes a hang in gnome-settings when trying to enroll a finger.
The same issue could be seen in the enroll example. Previously the enroll
example would hang on "deactivating" because at some point dev->is_active
is set to false and m_exit_start is never called.
Work-around SELinux AVC warnings caused by p11-kit (which is an NSS
dependency) trying to load the root user's p11-kit configs. We disable
this feature using the P11_KIT_NO_USER_CONFIG envvar.
See https://bugzilla.redhat.com/show_bug.cgi?id=1688583
‘img->key_number’ variable is originally from the device through bulk
endpoint of USB. The variable is immediately assigned to ‘buf[0]’ for
sending to control endpoint of the device. Here, integer overflow may
occur when the ‘img->key_number’ attempts to assign a value that is
outside of type range of ‘char’ to the ‘buf[0]’
Remove the sanity check added in commit b1afa9d, having a poll setup
isn't necessary to use timeouts, as long as only sync functions are
used.
Closes: #139
This will allow us to segragate helper functions that we want to use
within NBIS. The first helper will be a macro checking for overflow in
multiplications.
Free the maps if we're not returning them.
libfprint/nbis/mindtct/maps.c:176:14: warning: Potential leak of memory pointed to by 'direction_map'
return(ret);
^~~
libfprint/nbis/mindtct/maps.c:195:14: warning: Potential leak of memory pointed to by 'low_contrast_map'
return(ret);
^~~
libfprint/nbis/mindtct/maps.c:195:14: warning: Potential leak of memory pointed to by 'low_flow_map'
return(ret);
^~~
libfprint/nbis/bozorth3/bozorth3.c:704:1: warning: Value stored to 'kx' is never read
kx = 0;
^ ~
libfprint/nbis/bozorth3/bozorth3.c:820:4: warning: Value stored to 'l' is never read
l = 1;
^ ~
The first contour wasn't freed if we failed on the second contour.
libfprint/nbis/mindtct/contour.c:521:14: warning: Potential leak of memory pointed to by 'half1_ex'
return(ret);
^~~
libfprint/nbis/mindtct/contour.c:521:14: warning: Potential leak of memory pointed to by 'half1_ey'
return(ret);
^~~
libfprint/nbis/mindtct/contour.c:521:14: warning: Potential leak of memory pointed to by 'half1_x'
return(ret);
^~~
libfprint/nbis/mindtct/contour.c:521:14: warning: Potential leak of memory pointed to by 'half1_y'
return(ret);
^~~
libfprint/drivers/elan.c:351:4: warning: 2nd function call argument is an uninitialized value
dbg_buf(elandev->last_read, transfer->actual_length);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/drivers/elan.c:46:5: note: expanded from macro 'dbg_buf'
fp_dbg("%02x", buf[0]); \
^~~~~~~~~~~~~~~~~~~~~~
../../../../../../Projects/jhbuild/libfprint/libfprint/fpi-log.h:52:16: note: expanded from macro 'fp_dbg'
#define fp_dbg g_debug
^
libfprint/drivers/elan.c:351:4: warning: The left operand of '<<' is a garbage value
dbg_buf(elandev->last_read, transfer->actual_length);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/drivers/elan.c:48:27: note: expanded from macro 'dbg_buf'
fp_dbg("%04x", buf[0] << 8 | buf[1]); \
~~~~~~ ^
libfprint/drivers/elan.c:351:4: warning: The left operand of '<<' is a garbage value
dbg_buf(elandev->last_read, transfer->actual_length);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/drivers/elan.c:50:41: note: expanded from macro 'dbg_buf'
fp_dbg("%04x... (%d bytes)", buf[0] << 8 | buf[1], len)
~~~~~~ ^
By asserting if we have a zero line width.
libfprint/drivers/upeksonly.c:118:7: warning: Division by zero
mean /= (ctx->line_width / 2);
~~~~~^~~~~~~~~~~~~~~~~~~~~~~~
We don't need to assign urudev if we only want the size of one of its
members.
libfprint/drivers/uru4000.c:554:20: warning: Value stored to 'urudev' during its initialization is never read
struct uru4k_dev *urudev = FP_INSTANCE_DATA(FP_DEV(dev));
^~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use GPtrArray to simplify the implementation.
libfprint/fpi-data.c:777:13: warning: Access to field 'data' results in a dereference of a null pointer (loaded from variable 'elem')
list[i] = elem->data;
^~~~~~~~~~
libfprint/fpi-data.c:497:7: warning: 2nd function call argument is an uninitialized value
if (!fp_dev_supports_print_data(dev, fdata)) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/fpi-poll.c:398:11: warning: The left operand of '==' is a garbage value
else if (timercmp(&fprint_timeout, &libusb_timeout, <))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/sys/time.h:162:17: note: expanded from macro 'timercmp'
(((a)->tv_sec == (b)->tv_sec) ? \
~~~~~~~~~~~ ^
libfprint/fpi-ssm.c:244:9: warning: Access to field 'completed' results in a dereference of a null pointer (loaded from variable 'machine')
BUG_ON(machine->completed);
^~~~~~~~~~~~~~~~~~
libfprint/fpi-log.h:84:6: note: expanded from macro 'BUG_ON'
if (condition) { \
^~~~~~~~~
See dda6857fee
and https://bugzilla.redhat.com/show_bug.cgi?id=1656518
When the number of lines to assemble is 1, the median_filter() function
would be passed -1 as its size as it was calculated with:
(num_lines / 2) - 1
so (1 / 2) - 1 = 0 - 1 = -1
Add a guard to stop drivers trying to assemble single lines. This
doesn't however fix the vfs5011 driver that tried to do that.
...and add "Returns" docs to fpi-dev.c
We might need to do this more, documenting what the function does in
prose, as well as a short explanation of the returned data.
If get_next_timeout_expiry() fails, and libusb_get_next_timeout()
has no timeouts or failed, fprint_timeout will not be set, and
we cannot compare it to libusb_timeout.
Exit early if both failed or have empty queues.
libfprint/drivers/elan.c:351:12: warning: format specifies type 'unsigned short' but the argument has type 'unsigned char' [-Wformat]
dbg_buf(elandev->last_read, transfer->actual_length);
~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/drivers/elan.c:46:21: note: expanded from macro 'dbg_buf'
fp_dbg("%02hx", buf[0]); \
~~~~~~~~~~~~~~~~^~~~~~~
include/glib-2.0/glib/gmessages.h:345:32: note: expanded from macro 'g_debug'
__VA_ARGS__)
^~~~~~~~~~~
libfprint/drivers/elan.c:351:12: warning: format specifies type 'unsigned short' but the argument has type 'int' [-Wformat]
dbg_buf(elandev->last_read, transfer->actual_length);
~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/drivers/elan.c:48:21: note: expanded from macro 'dbg_buf'
fp_dbg("%04hx", buf[0] << 8 | buf[1]); \
~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
include/glib-2.0/glib/gmessages.h:345:32: note: expanded from macro 'g_debug'
__VA_ARGS__)
^~~~~~~~~~~
libfprint/drivers/elan.c:351:12: warning: format specifies type 'unsigned short' but the argument has type 'int' [-Wformat]
dbg_buf(elandev->last_read, transfer->actual_length);
~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/drivers/elan.c:50:35: note: expanded from macro 'dbg_buf'
fp_dbg("%04hx... (%d bytes)", buf[0] << 8 | buf[1], len)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
include/glib-2.0/glib/gmessages.h:345:32: note: expanded from macro 'g_debug'
__VA_ARGS__)
^~~~~~~~~~~
libfprint/drivers/elan.c:413:10: warning: format specifies type 'unsigned short' but the argument has type 'unsigned char' [-Wformat]
dbg_buf(cmd->cmd, 2);
~~~~~~~~^~~~~~~~~~~~
libfprint/drivers/elan.c:46:21: note: expanded from macro 'dbg_buf'
fp_dbg("%02hx", buf[0]); \
~~~~~~~~~~~~~~~~^~~~~~~
include/glib-2.0/glib/gmessages.h:345:32: note: expanded from macro 'g_debug'
__VA_ARGS__)
^~~~~~~~~~~
libfprint/drivers/elan.c:413:10: warning: format specifies type 'unsigned short' but the argument has type 'int' [-Wformat]
dbg_buf(cmd->cmd, 2);
~~~~~~~~^~~~~~~~~~~~
libfprint/drivers/elan.c:48:21: note: expanded from macro 'dbg_buf'
fp_dbg("%04hx", buf[0] << 8 | buf[1]); \
~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
include/glib-2.0/glib/gmessages.h:345:32: note: expanded from macro 'g_debug'
__VA_ARGS__)
^~~~~~~~~~~
libfprint/drivers/elan.c:413:10: warning: format specifies type 'unsigned short' but the argument has type 'int' [-Wformat]
dbg_buf(cmd->cmd, 2);
~~~~~~~~^~~~~~~~~~~~
libfprint/drivers/elan.c:50:35: note: expanded from macro 'dbg_buf'
fp_dbg("%04hx... (%d bytes)", buf[0] << 8 | buf[1], len)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
include/glib-2.0/glib/gmessages.h:345:32: note: expanded from macro 'g_debug'
__VA_ARGS__)
^~~~~~~~~~~
libfprint/drivers/vfs101.c:854:6: warning: absolute value function 'abs' given an argument of type 'long' but has parameter of type 'int' which may cause truncation of value [-Wabsolute-value]
if (abs(count - VFS_IMG_BEST_CONTRAST) < abs(vdev->best_clevel - VFS_IMG_BEST_CONTRAST))
^
libfprint/drivers/vfs101.c:854:6: note: use function 'labs' instead
if (abs(count - VFS_IMG_BEST_CONTRAST) < abs(vdev->best_clevel - VFS_IMG_BEST_CONTRAST))
^~~
labs
libfprint/fpi-dev-img.c:255:6: warning: variable 'print' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
if (imgdev->action != IMG_ACTION_CAPTURE) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/fpi-dev-img.c:271:25: note: uninitialized use occurs here
imgdev->acquire_data = print;
^~~~~
libfprint/fpi-dev-img.c:255:2: note: remove the 'if' if its condition is always true
if (imgdev->action != IMG_ACTION_CAPTURE) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/fpi-dev-img.c:232:29: note: initialize the variable 'print' to silence this warning
struct fp_print_data *print;
^
= NULL
This reverts commit 700c5791f8.
We don't need a poll setup to be able to call sync functions, which then
use async functions for implementation internally.
Closes: #124
Conflicts:
libfprint/fpi-async.c
struct xyt_struct uses a fixed-sized array to fit MAX_BOZORTH_MINUTIAE (200)
minutiae. MAX_FILE_MINUTIAE is 1000. So if we detected more than
MAX_BOZORTH_MINUTIAE, we would crash copying the data from the capture
to the structure.
We might want to use dynamically allocated arrays in the future (or
bigger ones) so that we don't lose minutiae.
Closes: #116
The checks weren't:
- checking whether the width or height were negative
- whether img->width * img->height would overflow, or
was bigger than G_MAXINT
- whether img->width * img->height was bigger than the total
length of the buffer
The last one looks like a thinko, it checked for:
(img->length * img->height) < img->length
which is equivalent to:
img->height < 1
which we already check for earlier.
Closes: #85
Add fp_minutia_get_coords() so that debugging applications can show the
detected minutiae along with the captured image.
This will also help fix the positively ancient fprint_demo.
See https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=907470
Group global variables, structure definitions, and functions, and
group functions by which C source they're defined in.
This also removes the FP_IMGDRV_SUPPORTS_UNCONDITIONAL_CAPTURE
definition that's already available in the drivers API-accessible
fpi-core.h
Pass the struct fp_dev and user_data to fpi_ssm callbacks, so that we
might be able to get rid of the fpi_ssm_get_user_data(), and
fpi_ssm_get_dev() as most drivers just get those from the ssm anyway
in their callbacks.
We can access the img_dev struct member directly, and we don't have
to double check that the img_dev member is actually an img_dev type,
as it always is.
Not precise enough, and it was only used in upekts to get/set the
instance private struct and keep it around, so add a new, more precisely
defined field to fp_dev for that.
The enum values need to be documented before the enum itself, otherwise
this warning is thrown:
warning: Value descriptions for fp_capture_result are missing in source code comment block.
mindtct/loop.c: In function ‘process_loop_V2’:
mindtct/loop.c:713:8: warning: variable ‘halfway’ set but not used [-Wunused-but-set-variable]
int halfway;
^~~~~~~
mindtct/morph.c: In function ‘get_south8_2’:
mindtct/morph.c:173:4: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
if (row >= ih-1) /* catch case where image is undefined southwards */
^~
mindtct/morph.c:176:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
return *(ptr+iw);
^~~~~~
mindtct/morph.c: In function ‘get_north8_2’:
mindtct/morph.c:197:4: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
if (row < 1) /* catch case where image is undefined northwards */
^~
mindtct/morph.c:200:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
return *(ptr-iw);
^~~~~~
mindtct/morph.c: In function ‘get_east8_2’:
mindtct/morph.c:221:4: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
if (col >= iw-1) /* catch case where image is undefined eastwards */
^~
mindtct/morph.c:224:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
return *(ptr+ 1);
^~~~~~
mindtct/morph.c: In function ‘get_west8_2’:
mindtct/morph.c:243:4: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
if (col < 1) /* catch case where image is undefined westwards */
^~
mindtct/morph.c:246:7: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
return *(ptr- 1);
^~~~~~
mindtct/block.c: In function ‘block_offsets’:
mindtct/block.c:108:18: warning: variable ‘ph’ set but not used [-Wunused-but-set-variable]
int pad2, pw, ph;
^~
NBIS is pretty complicated to update, seeing as we've made quite a few
changes to get it to compile as a library. With those scripts, we can
easily trim headers to remove functions we don't use, rename global
variables, and do any sort of fixups that are necessary right now.
In the future, removing unused NBIS functions might be as easy as
updating that script, re-running it, and pushing the changes.
Note that remove-function.lua is a very crude parser that only supports
NBIS' style of declaration, with the return type on the same line as the
function name. I wouldn't recommend trying to use it in another project.
Callcatcher (https://github.com/caolanm/callcatcher) was also used to
remove additional unused functions.
There has been a report that a 0x0c03 was installed straight (other
readers so far have produced images that are 90 degrees rotated). There
is no way for the dirver to know how a device is installed, so for now just
make an exception.
Sensor reset code has been removed because it is not needed during normal
operation.
Calibration and frame processing logic has been improved according to
recommendations from Elantech.