Add fpi_ssm_new_full() that allows to pass a name to the state-machine
constructor, not to change all the drivers, provide a fpi_ssm_new() macro
that stringifies the nr_parameters value (usually an enum value) as the name
so that we can use it for better debugging.
The IRQ handler will re-register itself automatically. However, if this
happens after the callback is called, then the check whether the IRQ
handler is running fails.
Re-start the IRQ handler before calling the callback. This way the state
changes happening from the callback will see the correct IRQ handler
registration state.
See: #205
At the end of enroll, the image device would put the driver into the
AWAIT_FINGER_ON state and then deactivate the device afterwards. Doing
this adds additional complexity to drivers which would need to handle
both cancellation and normal deactivation from that state.
Only put the device into the AWAIT_FINGER_ON state when we know that
another enroll stage is needed. This avoids the critical state
transition simplifying the driver state machine.
Fixes: #203
Fixes: 689aff0232
During calibration, the internal state was stored as INACTIVE. This is
not true though, the device is actively running state machines.
Move the state update to the start of the operation, therefore ensuring
we don't deactivate without completing the SSM.
Note that this will prevent a crash, but the driver still does not
behave quite correctly when such a state change does happen. However,
this is just a safety measure as the state change should not happen in
the first place.
See: #203
These were probably added in previous iterations, but they are not uneeded
anymore as the GSource embeds already a callback function.
So make just this clearer in the dispatch function.
Now that nbis is a static library it should be possible to compile it
without any fprint-built dependency, although since it included fp_internal
there was a compile-time dependency on the fp-enums that can be generated at
later times.
So:
- Move nbis-helpers to nbis includes (and remove inclusion in fp_internal)
- Move the Minutiae definitions inside a standalone fpi-minutiae header
- Include fpi-minutiae.h in fp_internal.h
- Include nbis-hepers.h and fpi-minutiae.h in nbis' lfs.h
- Adapt missing definitions in libfprint
The nbis headers are full of redundant declarations, we can't fix them all
now, so in the mean time let's use an header using pragma to ignore such
errors.
Add the error to nbis private include folder that should be used only by
headers of libfprint-nbis.
As nbis is an external source bundle, it does not necessarily make sense
to enable/fix all warnings to the extend we do for our own library code.
As such, separate the build process into multiple stages.
We were passing around the common cflags and setting them for each library
or executable, but this is just a repetition given we can just use
add_project_arguments for this.
Properly follow function signature using a temporary gsize variable address
to make the function use the same pointer type and avoid troubles at
deferencing it, while use automatic-casting to switch to signed one if
transfer succeeded.
Add a GCancellable parameter to fpi_ssm_nex_state_delayed and
fpi_ssm_jump_to_state_delayed() so that it's possible to cancel an action
from the caller and in case the driver wants to cancel a delayed operation
when a device action has been cancelled.
This allows to have an automatic cleanup of the timeout source when the
the callback is reached and to avoid to do further state changes in the
middle.
Since GSource data can be automatically cleaned up on source destruction, we
can mimic this for the devices timeout easily as well.
Add an extra parameter, and let's use this cocci file to adapt all the
drivers like magic:
@@
expression e1, e2, e3, e4;
@@
fpi_device_add_timeout (e1, e2, e3, e4
+ , NULL
)
When using fpi_usb_transfer_submit_sync we still need to unref the transfer
once done with it, so let's use an auto pointer so we free it also on
errors and early returns without having to handle this manually.
In rare occasions it could happen that the driver was reading
insufficient data. Fix this by using g_input_stream_read_all_async
which will ensure that incomplete data will not be misinterpreted.
This fixes rare test failures seen in fprintd.
Seems like the older uncrustify versions did not find these indentation
issues. Fix them.
Old versions of uncrustify will leave things as is, so this is not a
problem if developers are using an old version of uncrustify.
Using floating point causes architecture dependent results due to
accuracy/rounding differences. It is not hard to switch to fixed point,
and while this does cause quite different rounding errors, the
difference is small.
Fixes: #200
g_variant_new_from_data() allows to destroy some other user_data passed as
parameter that might be different from the aligned_data itself.
But since in this case they match, pass it to be set as g_free parameter
or it won't be free'd.
When we notify the enroll progress with a print, this needs to be unreffed
once we're done, but this only was happening in case of error.
Since it's not up to the callback function to free it, let's do it at the
end of the function.
As per this, clarify the docs for FpEnrollProgress marking it as transfer
none.
Allow to pass a double-pointer to be nullified as the transfer data in order
to mark it as NULL when the transfer is done.
This is useful if we're keeping the transfer around in order to check that
no one is currently running.
When a transfer is completed, we automatically unref it since we can't
consider it valid anymore since this point.
Update the drivers not to free the transfer after submitting anymore.
When a machine is completed, we automatically free it since we can't
consider it valid anymore since this point.
Update the drivers not to free the SSM on completion callback anymore.
As per commit 201b5a961 we use g_date_copy() to copy the date, however the
GLib implementation is done assuming that the GDate getters are always used
as the copy function doesn't preserve the original format of the date
(whether is using julian days or dmy), and the synaptics driver access to
the dmy values directly, without using the getter that would recompute the
proper values.
Causing a read error of unset values.
So, to avoid this, just use the g_date_get_* getters to retrieve the day
month and year for for defining the print enroll id.
This is the same logic we apply to fp-device by default: any completed
action should trigger the subsequent one when it is finished.
So in case we want reactivate after a deactivation, let's do it in an idle,
after removing the current pending timeout.
Meson files are normally using 4-spaces to indent and functions use first
parameter on the same line while others at next indentation level, not
following the parenthesis indentation.
So adapt libfprint to follow the meson standard.
Use the same approach of GTask, making possible to set the data from a
function. Givent the fact that a SSM has now a device parameter, it's
generally not needed to pass an extra data value.
In such case make it possible to set it and to define a destroy-notify
function to handle its destruction when freeing the SSM.
With the spatch to use GLib memory functions a lot of error paths were
removed. This causes an unused variable warning, so drop in a further
patch to remove the unused variable.
When drivers signal that an action is completed, they might be still in the
middle of a SSM and so its callback might not be called properly as part of
the completion.
This could make impossible to chain operations like open->enroll/list with
some drivers (hey, synaptics, I'm looking at you!) when the next operation
is called from the GAsyncReadyCallback of the previous call.
To avoid this to happen, ensure that when a driver completes an operation,
we handle the notification to the caller in a next idle iteration, not to
end up in a possible broken state.
Abstract this by using a function that handles the task return for each
used task type to avoid duplicating similar functions doing all the same
thing
We are actually using the cancel idle source in case the device supports
cancellation, so only connect to the cancellable in such case, and use an
utility function to do it and disconnect and reset the state everywhere.
fpi_do_movement_estimation is always called with num_stripes set to the
length of the list. Rather than using the passed value, assume we should
consume all stripes from the list.
Closes: #132
As the driver is not a normal image device, we need to add a custom
script to test it. Note that the ioctl dump must also be manually
modified unfortunately as the state is tracked incorrectly for the
device by umockdev-record.
This changes the cancellation logic a bit to ensure we always deactivate
the device (equivalent to the AWAIT_OFF state in the driver). All
commands except for the deactivation command should be cancelled when an
operation is stopped, this is to ensure that the LED is turned off at
the end of an operation.
This allows us to properly extract metadata for prints that are stored
on the device. We could for example delete the oldest prints first with
this information.
Heavily modified by Benjamin Berg <bberg@redhat.com> to port it to the
new libfprint API and adjust the coding style to follow more closely
other drivers.
When the device is deactivated while it is still active then the exit SM
needs to be executed from the SM that was active at the time. This is
signalled by is_active being set to FALSE while the active SM completes.
Call m_exit_start in those cases to ensure proper device deactivation.
This driver has a rather odd state machine and also used to mess iwth
the internal state of the image device. This code has been removed, but
is untested unfortunately due to a lack of hardware.
Most likely, this driver is not quite functional currently.
This is a rewrite of the core based on GObject and Gio. This commit
breaks the build in a lot of ways, but basic functionality will start
working again with the next commits.
Apply the previously added spatch/coccinell file to replace all
free/malloc/realloc calls with g_free/g_malloc/g_realloc. It also removes
all the error code paths that we do not need to check anymore.
This means that the returned data must be free'ed using g_free rather
than free, making memory management more consistent.
Add an spatch/coccinelle file to replace all free/malloc/realloc calls
with g_free/g_malloc/g_realloc. It also removes all the error code paths
that we do not need to check anymore.
We will use GUsb rather than libusb directly in the future. This should
simplify a lot of the integration work and changes such as supporting
hotplugging. It will also require quite a lot of internal changes.
If one of the callbacks called from fpi_imgdev_deactivate_complete()
was reactivating the device, then we would be overwriting whichever
"action" got set in the callback, leading to
fpi_imgdev_activate_complete() failing as it doesn't handle the "none"
action.
Reset the action before calling the callbacks.
If a USB transfer is started but not completed in one go, the wdata we
pass to continue_write_regv() will already be freed by the time we try
to use it again.
Only free() the wdata on error, or when the USB transfer is completed.
Closes: #180
The state was always AWAIT_FINGER and it was never used by any driver
(except for error checking). So remove it, in particular as a correct
state change will be done after activation anyway.
The only driver with code that actually did anything based on this was
the URU4000 driver. However, all it did was an explicit state change
execution. This is not necessary, as the state_change handler is called
anyway (i.e. we now only write the AWAIT_FINGER register once rather
than twice).
Manual changes plus:
@ init @
identifier driver_name;
identifier activate_func;
@@
struct fp_img_driver driver_name = {
...,
.activate = activate_func,
...,
};
@ remove_arg @
identifier dev;
identifier state;
identifier init.activate_func;
@@
activate_func (
struct fp_img_dev *dev
- , enum fp_imgdev_state state
)
{
<...
- if (state != IMGDEV_STATE_AWAIT_FINGER_ON) { ... }
...>
}
The driver was never ported to the new asynchronous model, meaning it
has been defunct since some time in 2008. Remove the driver, as
seemingly no one has complained about this and we have no proper way to
even verify a port is correct.
The upekts driver needs upek_proto.c while the upektc driver does not.
Move the corresponding source file entries so that both drivers compile
standalone.
The only API user currently seems to be the examples. fprintd has its
own storage and that will be a good idea in general.
So deprecate the API, we'll need to find a different solution for the
examples eventually.
The function was committed by accident as part of commit d18e1053
(lib: Add a way to name timeouts). It is not used anywhere and
fpi_timeout_cancel_all_for_dev exists, is exported and used and serves
the same purpose.
If users put their finger on the sensor between the bulge and
"un-bulge" area first and then swipe, the captured image would
be bad.
Skipping more frames can reduce the impact, so bump
ELAN_SKIP_LAST_FRAMES to 2.
Check for the mean calibration being outside of range to know whether we
require a recalibration. Continue with the usual checks if the
calibration value is within range.
The dimensions some sensors return is the maximum zero-based index
rather than the number of pixels. Assuming every sensor has an
even number of pixels is safe.
