/** @file moal_usb.c * * @brief This file contains the interfaceing to USB bus * driver. * * * Copyright 2008-2021 NXP * * This software file (the File) is distributed by NXP * under the terms of the GNU General Public License Version 2, June 1991 * (the License). You may use, redistribute and/or modify the File in * accordance with the terms and conditions of the License, a copy of which * is available by writing to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. * * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE * ARE EXPRESSLY DISCLAIMED. The License provides additional details about * this warranty disclaimer. * */ /******************************************************** Change log: 10/21/2008: initial version ********************************************************/ #include "moal_main.h" #include "moal_usb.h" extern struct semaphore AddRemoveCardSem; /******************************************************** Local Variables ********************************************************/ #if defined(USB8997) || defined(USB9098) || defined(USB9097) || \ defined(USB8978) || defined(USBNW62X) /** Card-type detection frame response */ typedef struct { /** 32-bit ACK+WINNER field */ t_u32 ack_winner; /** 32-bit Sequence number */ t_u32 seq; /** 32-bit extend */ t_u32 extend; /** 32-bit chip-revision code */ t_u32 chip_rev; /** 32-bit strap setting */ t_u32 strap; } usb_ack_pkt; #endif /** NXP USB device */ #define NXP_USB_DEVICE(vid, pid, name) \ USB_DEVICE(vid, pid), .driver_info = (t_ptr)name /** Name of the USB driver */ static const char usbdriver_name[] = "usbxxx"; /** This structure contains the device signature */ static struct usb_device_id woal_usb_table[] = { /* Enter the device signature inside */ #ifdef USB8801 {NXP_USB_DEVICE(USB8801_VID_1, USB8801_PID_1, "NXP WLAN USB Adapter")}, {NXP_USB_DEVICE(USB8801_VID_1, USB8801_PID_2, "NXP WLAN USB Adapter")}, #endif #ifdef USB8897 {NXP_USB_DEVICE(USB8897_VID_1, USB8897_PID_1, "NXP WLAN USB Adapter")}, {NXP_USB_DEVICE(USB8897_VID_1, USB8897_PID_2, "NXP WLAN USB Adapter")}, #endif #ifdef USB8997 {NXP_USB_DEVICE(USB8997_VID_1, USB8997_PID_1, "NXP WLAN USB Adapter")}, {NXP_USB_DEVICE(USB8997_VID_1, USB8997V2_PID_1, "NXP WLAN USB Adapter")}, {NXP_USB_DEVICE(USB8997_VID_1, USB8997_PID_2, "NXP WLAN USB Adapter")}, {NXP_USB_DEVICE(USB8997_VID_1, USB8997_PID_3, "NXP WLAN USB Adapter")}, {NXP_USB_DEVICE(USB8997_VID_1, USB8997_PID_4, "NXP WLAN USB Adapter")}, {NXP_USB_DEVICE(USB8997_VID_1, USB8997_PID_5, "NXP WLAN USB Adapter")}, {NXP_USB_DEVICE(USB8997_VID_1, USB8997_PID_6, "NXP WLAN USB Adapter")}, #endif #ifdef USB8978 {NXP_USB_DEVICE(USB8978_VID_1, USB8978_PID_1, "NXP WLAN USB Adapter")}, {NXP_USB_DEVICE(USB8978_VID_1, USB8978_PID_1_BT, "NXP WLAN USB Adapter")}, {NXP_USB_DEVICE(USB8978_VID_1, USB8978_PID_2, "NXP WLAN USB Adapter")}, {NXP_USB_DEVICE(USB8978_VID_1, USB8978_PID_2_BT, "NXP WLAN USB Adapter")}, #endif #ifdef USB9098 {NXP_USB_DEVICE(USB9098_VID_1, USB9098_PID_1, "NXP WLAN USB Adapter")}, {NXP_USB_DEVICE(USB9098_VID_1, USB9098_PID_2, "NXP WLAN USB Adapter")}, #endif #ifdef USB9097 {NXP_USB_DEVICE(USB9097_VID_1, USB9097_PID_1, "NXP WLAN USB Adapter")}, {NXP_USB_DEVICE(USB9097_VID_1, USB9097_PID_2, "NXP WLAN USB Adapter")}, #endif #ifdef USBNW62X {NXP_USB_DEVICE(USBNW62X_VID_1, USBNW62X_PID_1, "NXP WLAN USB Adapter")}, {NXP_USB_DEVICE(USBNW62X_VID_1, USBNW62X_PID_2, "NXP WLAN USB Adapter")}, #endif /* Terminating entry */ {}, }; /** This structure contains the device signature */ static struct usb_device_id woal_usb_table_skip_fwdnld[] = { /* Enter the device signature inside */ #ifdef USB8801 {NXP_USB_DEVICE(USB8801_VID_1, USB8801_PID_2, "NXP WLAN USB Adapter")}, #endif #ifdef USB8897 {NXP_USB_DEVICE(USB8897_VID_1, USB8897_PID_2, "NXP WLAN USB Adapter")}, #endif #ifdef USB8997 {NXP_USB_DEVICE(USB8997_VID_1, USB8997_PID_2, "NXP WLAN USB Adapter")}, #endif #ifdef USB8978 {NXP_USB_DEVICE(USB8978_VID_1, USB8978_PID_2, "NXP WLAN USB Adapter")}, {NXP_USB_DEVICE(USB8978_VID_1, USB8978_PID_2_BT, "NXP WLAN USB Adapter")}, #endif #ifdef USB9098 {NXP_USB_DEVICE(USB9098_VID_1, USB9098_PID_2, "NXP WLAN USB Adapter")}, #endif #ifdef USB9097 {NXP_USB_DEVICE(USB9097_VID_1, USB9097_PID_2, "NXP WLAN USB Adapter")}, #endif #ifdef USBNW62X {NXP_USB_DEVICE(USBNW62X_VID_1, USBNW62X_PID_2, "NXP WLAN USB Adapter")}, #endif /* Terminating entry */ {}, }; static mlan_status woal_usb_submit_rx_urb(urb_context *ctx, int size); static int woal_usb_probe(struct usb_interface *intf, const struct usb_device_id *id); static void woal_usb_disconnect(struct usb_interface *intf); static mlan_status woal_usb_write_data_sync(moal_handle *handle, mlan_buffer *pmbuf, t_u32 endpoint, t_u32 timeout); static mlan_status woal_usb_read_data_sync(moal_handle *handle, mlan_buffer *pmbuf, t_u32 endpoint, t_u32 timeout); #ifdef CONFIG_PM static int woal_usb_suspend(struct usb_interface *intf, pm_message_t message); static int woal_usb_resume(struct usb_interface *intf); #endif /* CONFIG_PM */ /** woal_usb_driver */ static struct usb_driver REFDATA woal_usb_driver = { /* Driver name */ .name = usbdriver_name, /* Probe function name */ .probe = woal_usb_probe, /* Disconnect function name */ .disconnect = woal_usb_disconnect, /* Device signature table */ .id_table = woal_usb_table, #ifdef CONFIG_PM /* Suspend function name */ .suspend = woal_usb_suspend, /* Resume function name */ .resume = woal_usb_resume, /* Reset resume function name */ .reset_resume = woal_usb_resume, #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) /* Driver supports autosuspend */ .supports_autosuspend = 1, #endif #endif /* CONFIG_PM */ }; MODULE_DEVICE_TABLE(usb, woal_usb_table); MODULE_DEVICE_TABLE(usb, woal_usb_table_skip_fwdnld); /* moal interface ops */ static moal_if_ops usb_ops; /******************************************************** Global Variables ********************************************************/ /******************************************************** Local Functions ********************************************************/ #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19) /** * @brief This function receive packet of the data/cmd/event packet * and pass to MLAN * * @param urb Pointer to struct urb * @param regs Registers * * @return N/A */ static void woal_usb_receive(struct urb *urb, struct pt_regs *regs) #else /** * @brief This function receive packet of the data/cmd/event packet * and pass to MLAN * * @param urb Pointer to struct urb * * @return N/A */ static void woal_usb_receive(struct urb *urb) #endif { urb_context *context = NULL; moal_handle *handle = NULL; mlan_buffer *pmbuf = NULL; struct usb_card_rec *cardp = NULL; int recv_length; int size; mlan_status status = MLAN_STATUS_SUCCESS; ENTER(); if (!urb || !urb->context) { PRINTM(MERROR, "URB or URB context is not valid in USB Rx\n"); LEAVE(); return; } context = (urb_context *)urb->context; handle = context->handle; pmbuf = context->pmbuf; recv_length = urb->actual_length; if (!handle || !handle->card || !pmbuf) { PRINTM(MERROR, "moal handle, card structure or mlan_buffer is not valid in USB Rx\n"); LEAVE(); return; } cardp = (struct usb_card_rec *)handle->card; if (cardp->rx_cmd_ep == context->ep) atomic_dec(&cardp->rx_cmd_urb_pending); else atomic_dec(&cardp->rx_data_urb_pending); if (recv_length) { if (urb->status || (handle->surprise_removed == MTRUE)) { if (handle->surprise_removed || handle->is_suspended) { woal_free_mlan_buffer(handle, pmbuf); context->pmbuf = NULL; goto rx_exit; } else { PRINTM(MERROR, "EP %d Rx URB status failure: %d\n", context->ep, urb->status); /* Do not free mlan_buffer in case of command ep */ if (cardp->rx_cmd_ep != context->ep) woal_free_mlan_buffer(handle, pmbuf); goto setup_for_next; } } pmbuf->data_len = recv_length; pmbuf->flags |= MLAN_BUF_FLAG_RX_DEAGGR; /* Send packet to MLAN */ atomic_inc(&handle->rx_pending); status = mlan_recv(handle->pmlan_adapter, pmbuf, context->ep); PRINTM(MINFO, "Receive length = 0x%x, status=%d\n", recv_length, status); if (status == MLAN_STATUS_PENDING) { queue_work(handle->workqueue, &handle->main_work); /* urb for data_ep is re-submitted now, unless we reach * USB_HIGH_RX_PENDING */ /* urb for cmd_ep will be re-submitted in callback * moal_recv_complete */ if (cardp->rx_cmd_ep == context->ep) goto rx_exit; else if (atomic_read(&handle->rx_pending) >= USB_HIGH_RX_PENDING) { context->pmbuf = NULL; goto rx_exit; } } else { atomic_dec(&handle->rx_pending); if (status == MLAN_STATUS_FAILURE) { PRINTM(MERROR, "MLAN fail to process the receive data\n"); } else if ((status == MLAN_STATUS_SUCCESS) && (pmbuf->flags & MLAN_BUF_FLAG_SLEEPCFM_RESP)) { pmbuf->flags &= ~MLAN_BUF_FLAG_SLEEPCFM_RESP; queue_work(handle->workqueue, &handle->main_work); } /* Do not free mlan_buffer in case of command ep */ if (cardp->rx_cmd_ep != context->ep) woal_free_mlan_buffer(handle, pmbuf); } } else if (urb->status) { if (!((cardp->rx_data_ep == context->ep) && (cardp->resubmit_urbs == 1))) { if (!handle->is_suspended) { PRINTM(MMSG, "Card is removed: %d\n", urb->status); handle->surprise_removed = MTRUE; } } woal_free_mlan_buffer(handle, pmbuf); context->pmbuf = NULL; goto rx_exit; } else { /* Do not free mlan_buffer in case of command ep */ if (cardp->rx_cmd_ep != context->ep) woal_free_mlan_buffer(handle, pmbuf); goto setup_for_next; } setup_for_next: if (cardp->rx_cmd_ep == context->ep) { size = MLAN_RX_CMD_BUF_SIZE; } else { if (cardp->rx_deaggr_ctrl.enable) { size = cardp->rx_deaggr_ctrl.aggr_max; if (cardp->rx_deaggr_ctrl.aggr_mode == MLAN_USB_AGGR_MODE_NUM) { size *= MAX(MLAN_USB_MAX_PKT_SIZE, cardp->rx_deaggr_ctrl.aggr_align); size = MAX(size, MLAN_RX_DATA_BUF_SIZE); } } else size = MLAN_RX_DATA_BUF_SIZE; } woal_usb_submit_rx_urb(context, size); rx_exit: LEAVE(); return; } #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19) /** * @brief Call back function to handle the status of the Tx data URB * * @param urb Pointer to urb structure * @param regs Registers * * @return N/A */ static void woal_usb_tx_complete(struct urb *urb, struct pt_regs *regs) #else /** * @brief Call back function to handle the status of the Tx data URB * * @param urb Pointer to urb structure * * @return N/A */ static void woal_usb_tx_complete(struct urb *urb) #endif { urb_context *context = NULL; moal_handle *handle = NULL; struct usb_card_rec *cardp = NULL; ENTER(); if (!urb || !urb->context) { PRINTM(MERROR, "URB or URB context is not valid in USB Tx complete\n"); LEAVE(); return; } context = (urb_context *)urb->context; handle = context->handle; if (!handle || !handle->card || !context->pmbuf) { PRINTM(MERROR, "moal handle, card structure or mlan_buffer is not valid in USB Tx complete\n"); LEAVE(); return; } cardp = handle->card; /* Handle the transmission complete validations */ if (urb->status) { PRINTM(MERROR, "EP %d Tx URB status failure: %d\n", context->ep, urb->status); mlan_write_data_async_complete(handle->pmlan_adapter, context->pmbuf, context->ep, MLAN_STATUS_FAILURE); } else { mlan_write_data_async_complete(handle->pmlan_adapter, context->pmbuf, context->ep, MLAN_STATUS_SUCCESS); } /* Decrease pending URB counter */ if (context->ep == cardp->tx_cmd_ep) atomic_dec(&cardp->tx_cmd_urb_pending); else if (context->ep == cardp->tx_data_ep) atomic_dec(&cardp->tx_data_urb_pending); else if (context->ep == cardp->tx_data2_ep) atomic_dec(&cardp->tx_data2_urb_pending); queue_work(handle->workqueue, &handle->main_work); LEAVE(); return; } /** * @brief This function sets up the data to receive * * @param ctx Pointer to urb_context structure * @param size Skb size * * @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE */ static mlan_status woal_usb_submit_rx_urb(urb_context *ctx, int size) { moal_handle *handle = ctx->handle; struct usb_card_rec *cardp = (struct usb_card_rec *)handle->card; mlan_status ret = MLAN_STATUS_FAILURE; t_u8 *data = NULL; ENTER(); if (handle->surprise_removed || handle->is_suspended) { if ((cardp->rx_cmd_ep == ctx->ep) && ctx->pmbuf) { woal_free_mlan_buffer(handle, ctx->pmbuf); ctx->pmbuf = NULL; } PRINTM(MERROR, "Card removed/suspended, EP %d Rx URB submit skipped\n", ctx->ep); goto rx_ret; } if (cardp->rx_cmd_ep != ctx->ep) { ctx->pmbuf = woal_alloc_mlan_buffer(handle, size); if (!ctx->pmbuf) { PRINTM(MERROR, "Fail to submit Rx URB due to no memory/skb\n"); goto rx_ret; } ctx->pmbuf->data_offset = MLAN_RX_HEADER_LEN; data = ctx->pmbuf->pbuf + ctx->pmbuf->data_offset; } else { ctx->pmbuf->data_offset = 0; data = ctx->pmbuf->pbuf + ctx->pmbuf->data_offset; } if (cardp->rx_cmd_ep == ctx->ep && cardp->rx_cmd_ep_type == USB_ENDPOINT_XFER_INT) usb_fill_int_urb(ctx->urb, cardp->udev, usb_rcvintpipe(cardp->udev, ctx->ep), data, size - ctx->pmbuf->data_offset, woal_usb_receive, (void *)ctx, cardp->rx_cmd_interval); else usb_fill_bulk_urb(ctx->urb, cardp->udev, usb_rcvbulkpipe(cardp->udev, ctx->ep), data, size - ctx->pmbuf->data_offset, woal_usb_receive, (void *)ctx); if (cardp->rx_cmd_ep == ctx->ep) atomic_inc(&cardp->rx_cmd_urb_pending); else atomic_inc(&cardp->rx_data_urb_pending); if (usb_submit_urb(ctx->urb, GFP_ATOMIC)) { /* Submit URB failure */ PRINTM(MERROR, "Submit EP %d Rx URB failed: %d\n", ctx->ep, ret); woal_free_mlan_buffer(handle, ctx->pmbuf); if (cardp->rx_cmd_ep == ctx->ep) atomic_dec(&cardp->rx_cmd_urb_pending); else atomic_dec(&cardp->rx_data_urb_pending); ctx->pmbuf = NULL; ret = MLAN_STATUS_FAILURE; } else { ret = MLAN_STATUS_SUCCESS; } rx_ret: LEAVE(); return ret; } /******************************************************** Global Functions ********************************************************/ #if defined(USB8997) || defined(USB9098) || defined(USB9097) || \ defined(USB8978) || defined(USBNW62X) /** * @brief Check chip revision * * @param handle A pointer to moal_handle structure * @param usb_chip_rev A pointer to usb_chip_rev variable * @param usb_strap A pointer to usb_strap * * @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE */ static mlan_status woal_check_chip_revision(moal_handle *handle, t_u32 *usb_chip_rev, t_u32 *usb_strap) { mlan_status ret = MLAN_STATUS_SUCCESS; mlan_buffer mbuf; t_u8 *tx_buff = NULL; t_u8 *recv_buff = NULL; usb_ack_pkt ack_pkt; t_u32 extend_ver; t_u8 tx_size = CHIP_REV_TX_BUF_SIZE; struct usb_card_rec *cardp = handle->card; ENTER(); /* Allocate memory for transmit */ tx_buff = kzalloc(tx_size, GFP_ATOMIC | GFP_DMA); if (tx_buff == NULL) { PRINTM(MERROR, "Could not allocate buffer for chip revision check frame transmission\n"); ret = MLAN_STATUS_FAILURE; goto cleanup; } /* Allocate memory for receive */ recv_buff = kzalloc(CHIP_REV_RX_BUF_SIZE, GFP_ATOMIC | GFP_DMA); if (recv_buff == NULL) { PRINTM(MERROR, "Could not allocate buffer for chip revision check frame response\n"); ret = MLAN_STATUS_FAILURE; goto cleanup; } /* The struct is initialised to all zero */ memset(&ack_pkt, 0, sizeof(usb_ack_pkt)); /* Send pseudo data to check winner status first */ memset(&mbuf, 0, sizeof(mlan_buffer)); mbuf.pbuf = (t_u8 *)tx_buff; mbuf.data_len = tx_size; /* Send the chip revision check frame */ ret = woal_usb_write_data_sync(handle, &mbuf, cardp->tx_cmd_ep, MLAN_USB_BULK_MSG_TIMEOUT); if (ret != MLAN_STATUS_SUCCESS) { PRINTM(MERROR, "Chip revision check frame dnld: write_data failed, ret %d\n", ret); ret = MLAN_STATUS_FAILURE; goto cleanup; } memset(&mbuf, 0, sizeof(mlan_buffer)); mbuf.pbuf = (t_u8 *)recv_buff; mbuf.data_len = CHIP_REV_RX_BUF_SIZE; /* Receive the chip revision check frame response */ ret = woal_usb_read_data_sync(handle, &mbuf, cardp->rx_cmd_ep, MLAN_USB_BULK_MSG_TIMEOUT); if (ret != MLAN_STATUS_SUCCESS) { PRINTM(MERROR, "Chip revision check frame response: read_data failed, ret %d\n", ret); ret = MLAN_STATUS_FAILURE; goto cleanup; } moal_memcpy_ext(handle, &ack_pkt, recv_buff, sizeof(usb_ack_pkt), sizeof(ack_pkt)); ack_pkt.ack_winner = woal_le32_to_cpu(ack_pkt.ack_winner); ack_pkt.seq = woal_le32_to_cpu(ack_pkt.seq); ack_pkt.extend = woal_le32_to_cpu(ack_pkt.extend); ack_pkt.chip_rev = woal_le32_to_cpu(ack_pkt.chip_rev); ack_pkt.strap = woal_le32_to_cpu(ack_pkt.strap); if ((ack_pkt.extend & 0xffff0000) == EXTEND_HDR) { extend_ver = ack_pkt.extend & 0x0000ffff; *usb_chip_rev = ack_pkt.chip_rev & 0x000000ff; if (extend_ver >= EXTEND_V2) { PRINTM(MINFO, "chip_rev=0x%x, strap=0x%x\n", *usb_chip_rev, ack_pkt.strap); *usb_strap = ack_pkt.strap & 0x7; } else PRINTM(MINFO, "chip_rev=0x%x\n", *usb_chip_rev); } cleanup: kfree(recv_buff); kfree(tx_buff); LEAVE(); return ret; } #endif /** * @brief This function unlink urb * * @param handle A pointer to moal_handle structure * @return N/A */ static void woal_usb_unlink_urb(void *card_desc) { struct usb_card_rec *cardp = (struct usb_card_rec *)card_desc; int i; ENTER(); if (cardp) { /* Unlink Rx cmd URB */ if (atomic_read(&cardp->rx_cmd_urb_pending) && cardp->rx_cmd.urb) { usb_kill_urb(cardp->rx_cmd.urb); } /* Unlink Rx data URBs */ if (atomic_read(&cardp->rx_data_urb_pending)) { for (i = 0; i < MVUSB_RX_DATA_URB; i++) { if (cardp->rx_data_list[i].urb) usb_kill_urb( cardp->rx_data_list[i].urb); } } /* Unlink Tx cmd URB */ if (atomic_read(&cardp->tx_cmd_urb_pending) && cardp->tx_cmd.urb) { usb_kill_urb(cardp->tx_cmd.urb); } /* Unlink Tx data URBs */ if (atomic_read(&cardp->tx_data_urb_pending)) { for (i = 0; i < MVUSB_TX_HIGH_WMARK; i++) { if (cardp->tx_data_list[i].urb) { usb_kill_urb( cardp->tx_data_list[i].urb); } if (cardp->tx_data2_list[i].urb) { usb_kill_urb( cardp->tx_data2_list[i].urb); } } } } LEAVE(); } /** * @brief Free Tx/Rx urb, skb and Rx buffer * * @param cardp Pointer usb_card_rec * * @return N/A */ void woal_usb_free(struct usb_card_rec *cardp) { int i; ENTER(); woal_usb_unlink_urb(cardp); /* Free Rx data URBs */ for (i = 0; i < MVUSB_RX_DATA_URB; i++) { if (cardp->rx_data_list[i].urb) { usb_free_urb(cardp->rx_data_list[i].urb); cardp->rx_data_list[i].urb = NULL; } } /* Free Rx cmd URB */ if (cardp->rx_cmd.urb) { usb_free_urb(cardp->rx_cmd.urb); cardp->rx_cmd.urb = NULL; } /* Free Tx data URBs */ for (i = 0; i < MVUSB_TX_HIGH_WMARK; i++) { if (cardp->tx_data_list[i].urb) { usb_free_urb(cardp->tx_data_list[i].urb); cardp->tx_data_list[i].urb = NULL; } if (cardp->tx_data2_list[i].urb) { usb_free_urb(cardp->tx_data2_list[i].urb); cardp->tx_data2_list[i].urb = NULL; } } /* Free Tx cmd URB */ if (cardp->tx_cmd.urb) { usb_free_urb(cardp->tx_cmd.urb); cardp->tx_cmd.urb = NULL; } LEAVE(); return; } static t_u16 woal_update_card_type(t_void *card) { struct usb_card_rec *cardp_usb = (struct usb_card_rec *)card; t_u16 card_type = 0; /* Update card type */ #ifdef USB8801 if (woal_cpu_to_le16(cardp_usb->udev->descriptor.idProduct) == (__force __le16)USB8801_PID_1 || woal_cpu_to_le16(cardp_usb->udev->descriptor.idProduct) == (__force __le16)USB8801_PID_2) { card_type = CARD_TYPE_USB8801; moal_memcpy_ext(NULL, driver_version, CARD_USB8801, strlen(CARD_USB8801), strlen(driver_version)); moal_memcpy_ext(NULL, driver_version + strlen(INTF_CARDTYPE) + strlen(KERN_VERSION), V14, strlen(V14), strlen(driver_version) - strlen(INTF_CARDTYPE) - strlen(KERN_VERSION)); } #endif #ifdef USB8897 if (woal_cpu_to_le16(cardp_usb->udev->descriptor.idProduct) == (__force __le16)USB8897_PID_1 || woal_cpu_to_le16(cardp_usb->udev->descriptor.idProduct) == (__force __le16)USB8897_PID_2) { card_type = CARD_TYPE_USB8897; moal_memcpy_ext(NULL, driver_version, CARD_USB8897, strlen(CARD_USB8897), strlen(driver_version)); moal_memcpy_ext(NULL, driver_version + strlen(INTF_CARDTYPE) + strlen(KERN_VERSION), V15, strlen(V15), strlen(driver_version) - strlen(INTF_CARDTYPE) - strlen(KERN_VERSION)); } #endif #ifdef USB8997 if (woal_cpu_to_le16(cardp_usb->udev->descriptor.idProduct) == (__force __le16)USB8997_PID_1 || woal_cpu_to_le16(cardp_usb->udev->descriptor.idProduct) == (__force __le16)USB8997_PID_2 || woal_cpu_to_le16(cardp_usb->udev->descriptor.idProduct) == (__force __le16)USB8997_PID_3 || woal_cpu_to_le16(cardp_usb->udev->descriptor.idProduct) == (__force __le16)USB8997_PID_4 || woal_cpu_to_le16(cardp_usb->udev->descriptor.idProduct) == (__force __le16)USB8997_PID_5 || woal_cpu_to_le16(cardp_usb->udev->descriptor.idProduct) == (__force __le16)USB8997_PID_6 || woal_cpu_to_le16(cardp_usb->udev->descriptor.idProduct) == (__force __le16)USB8997V2_PID_1) { card_type = CARD_TYPE_USB8997; moal_memcpy_ext(NULL, driver_version, CARD_USB8997, strlen(CARD_USB8997), strlen(driver_version)); moal_memcpy_ext(NULL, driver_version + strlen(INTF_CARDTYPE) + strlen(KERN_VERSION), V16, strlen(V16), strlen(driver_version) - strlen(INTF_CARDTYPE) - strlen(KERN_VERSION)); } #endif #ifdef USB8978 if (woal_cpu_to_le16(cardp_usb->udev->descriptor.idProduct) == (__force __le16)USB8978_PID_1 || woal_cpu_to_le16(cardp_usb->udev->descriptor.idProduct) == (__force __le16)USB8978_PID_2) { card_type = CARD_TYPE_USB8978; moal_memcpy_ext(NULL, driver_version, "USBIW416", strlen("USBIW416"), strlen(driver_version)); moal_memcpy_ext(NULL, driver_version + strlen(INTF_CARDTYPE) + strlen(KERN_VERSION), V16, strlen(V16), strlen(driver_version) - strlen(INTF_CARDTYPE) - strlen(KERN_VERSION)); } #endif #ifdef USB9098 if (woal_cpu_to_le16(cardp_usb->udev->descriptor.idProduct) == (__force __le16)USB9098_PID_1 || woal_cpu_to_le16(cardp_usb->udev->descriptor.idProduct) == (__force __le16)USB9098_PID_2) { card_type = CARD_TYPE_USB9098; moal_memcpy_ext(NULL, driver_version, CARD_USB9098, strlen(CARD_USB9098), strlen(driver_version)); moal_memcpy_ext(NULL, driver_version + strlen(INTF_CARDTYPE) + strlen(KERN_VERSION), V17, strlen(V17), strlen(driver_version) - strlen(INTF_CARDTYPE) - strlen(KERN_VERSION)); } #endif #ifdef USB9097 if (woal_cpu_to_le16(cardp_usb->udev->descriptor.idProduct) == (__force __le16)USB9097_PID_1 || woal_cpu_to_le16(cardp_usb->udev->descriptor.idProduct) == (__force __le16)USB9097_PID_2) { card_type = CARD_TYPE_USB9097; moal_memcpy_ext(NULL, driver_version, CARD_USB9097, strlen(CARD_USB9097), strlen(driver_version)); moal_memcpy_ext(NULL, driver_version + strlen(INTF_CARDTYPE) + strlen(KERN_VERSION), V17, strlen(V17), strlen(driver_version) - strlen(INTF_CARDTYPE) - strlen(KERN_VERSION)); } #endif #ifdef USBNW62X if (woal_cpu_to_le16(cardp_usb->udev->descriptor.idProduct) == (__force __le16)USBNW62X_PID_1 || woal_cpu_to_le16(cardp_usb->udev->descriptor.idProduct) == (__force __le16)USBNW62X_PID_2) { card_type = CARD_TYPE_USBNW62X; moal_memcpy_ext(NULL, driver_version, CARD_USBNW62X, strlen(CARD_USBNW62X), strlen(driver_version)); moal_memcpy_ext(NULL, driver_version + strlen(INTF_CARDTYPE) + strlen(KERN_VERSION), V17, strlen(V17), strlen(driver_version) - strlen(INTF_CARDTYPE) - strlen(KERN_VERSION)); } #endif return card_type; } /** * @brief Sets the configuration values * * @param intf Pointer to usb_interface * @param id Pointer to usb_device_id * * @return Address of variable usb_cardp, error code otherwise */ static int woal_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *udev; struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; int i; struct usb_card_rec *usb_cardp = NULL; t_u16 card_type = 0; ENTER(); #if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 6, 0) PRINTM(MMSG, "USB probe: idVendor=%x idProduct=%x bInterfaceNumber=%d\n", id->idVendor, id->idProduct, id->bInterfaceNumber); #endif udev = interface_to_usbdev(intf); usb_cardp = kzalloc(sizeof(struct usb_card_rec), GFP_KERNEL); if (!usb_cardp) { LEAVE(); return -ENOMEM; } /* Check probe is for our device */ for (i = 0; woal_usb_table[i].idVendor; i++) { if (woal_cpu_to_le16(udev->descriptor.idVendor) == (__force __le16)woal_usb_table[i].idVendor && woal_cpu_to_le16(udev->descriptor.idProduct) == (__force __le16)woal_usb_table[i].idProduct) { PRINTM(MMSG, "VID/PID = %X/%X, Boot2 version = %X\n", woal_cpu_to_le16(udev->descriptor.idVendor), woal_cpu_to_le16(udev->descriptor.idProduct), woal_cpu_to_le16(udev->descriptor.bcdDevice)); switch (woal_cpu_to_le16(udev->descriptor.idProduct)) { #ifdef USB8801 case (__force __le16)USB8801_PID_1: #endif /* USB8801 */ #ifdef USB8897 case (__force __le16)USB8897_PID_1: #endif /* USB8897 */ #ifdef USB8997 case (__force __le16)USB8997_PID_1: case (__force __le16)USB8997V2_PID_1: #endif /* USB8997 */ #ifdef USB8978 case (__force __le16)USB8978_PID_1: case (__force __le16)USB8978_PID_1_BT: #endif /* USB8978 */ #ifdef USB9098 case (__force __le16)USB9098_PID_1: #endif /* USB9098 */ #ifdef USB9097 case (__force __le16)USB9097_PID_1: #endif /* USB9097 */ #ifdef USBNW62X case (__force __le16)USBNW62X_PID_1: #endif /* USBNW62X */ /* If skip FW is set, we must return error so * the next driver can download the FW */ if (skip_fwdnld) goto error; else usb_cardp->boot_state = USB_FW_DNLD; break; #ifdef USB8801 case (__force __le16)USB8801_PID_2: #endif /* USB8801 */ #ifdef USB8897 case (__force __le16)USB8897_PID_2: #endif /* USB8897 */ #ifdef USB8997 case (__force __le16)USB8997_PID_2: #endif /* USB8997 */ #ifdef USB8978 case (__force __le16)USB8978_PID_2: case (__force __le16)USB8978_PID_2_BT: #endif /* USB8978 */ #ifdef USB9098 case (__force __le16)USB9098_PID_2: #endif /* USB9098 */ #ifdef USB9097 case (__force __le16)USB9097_PID_2: #endif /* USB9097 */ #ifdef USBNW62X case (__force __le16)USBNW62X_PID_2: #endif /* USBNW62X */ usb_cardp->boot_state = USB_FW_READY; break; } /*To do, get card type*/ /* if (woal_cpu_to_le16(udev->descriptor.idProduct) == USB8897_PID_2) usb_cardp->card_type = CARD_TYPE_USB8897; else if (woal_cpu_to_le16(udev->descriptor.idProduct) == USB8997_PID_2) usb_cardp->card_type = CARD_TYPE_USB997; */ break; } } if (woal_usb_table[i].idVendor) { usb_cardp->udev = udev; iface_desc = intf->cur_altsetting; usb_cardp->intf = intf; PRINTM(MINFO, "bcdUSB = 0x%X bDeviceClass = 0x%X" " bDeviceSubClass = 0x%X, bDeviceProtocol = 0x%X\n", woal_cpu_to_le16(udev->descriptor.bcdUSB), udev->descriptor.bDeviceClass, udev->descriptor.bDeviceSubClass, udev->descriptor.bDeviceProtocol); for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; if ((usb_endpoint_is_bulk_in(endpoint) || usb_endpoint_is_int_in(endpoint)) && (usb_endpoint_num(endpoint) == MLAN_USB_EP_CMD_EVENT || usb_endpoint_num(endpoint) == MLAN_USB_EP_CMD_EVENT_IF2)) { usb_cardp->rx_cmd_ep_type = usb_endpoint_type(endpoint); usb_cardp->rx_cmd_interval = endpoint->bInterval; /* We found a bulk in command/event endpoint */ PRINTM(MCMND, "Rx CMD/EVT: max packet size = %d, address = %d ep_type=%d\n", woal_le16_to_cpu( endpoint->wMaxPacketSize), endpoint->bEndpointAddress, usb_cardp->rx_cmd_ep_type); usb_cardp->rx_cmd_ep = (endpoint->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); atomic_set(&usb_cardp->rx_cmd_urb_pending, 0); if (usb_endpoint_num(endpoint) == MLAN_USB_EP_CMD_EVENT_IF2) usb_cardp->second_mac = MTRUE; } if (usb_endpoint_is_bulk_in(endpoint) && (usb_endpoint_num(endpoint) == MLAN_USB_EP_DATA || usb_endpoint_num(endpoint) == MLAN_USB_EP_DATA_IF2)) { /* We found a bulk in data endpoint */ PRINTM(MINFO, "Bulk IN: max packet size = %d, address = %d\n", woal_le16_to_cpu( endpoint->wMaxPacketSize), endpoint->bEndpointAddress); usb_cardp->rx_data_ep = (endpoint->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); atomic_set(&usb_cardp->rx_data_urb_pending, 0); } if (usb_endpoint_is_bulk_out(endpoint) && (usb_endpoint_num(endpoint) == MLAN_USB_EP_DATA || usb_endpoint_num(endpoint) == MLAN_USB_EP_DATA_IF2)) { /* We found a bulk out data endpoint */ PRINTM(MCMND, "Bulk OUT: max packet size = %d, address = %d\n", woal_le16_to_cpu( endpoint->wMaxPacketSize), endpoint->bEndpointAddress); usb_cardp->tx_data_ep = endpoint->bEndpointAddress; atomic_set(&usb_cardp->tx_data_urb_pending, 0); usb_cardp->tx_data_maxpktsize = (__force int)woal_le16_to_cpu( endpoint->wMaxPacketSize); } if (usb_endpoint_is_bulk_out(endpoint) && (usb_endpoint_num(endpoint) == MLAN_USB_EP_DATA_CH2 || usb_endpoint_num(endpoint) == MLAN_USB_EP_DATA_CH2_IF2)) { /* We found a bulk out data endpoint */ PRINTM(MCMND, "Bulk OUT2: max packet size = %d, address = %d\n", woal_le16_to_cpu( endpoint->wMaxPacketSize), endpoint->bEndpointAddress); usb_cardp->tx_data2_ep = endpoint->bEndpointAddress; atomic_set(&usb_cardp->tx_data2_urb_pending, 0); usb_cardp->tx_data2_maxpktsize = (__force int)woal_le16_to_cpu( endpoint->wMaxPacketSize); } if ((usb_endpoint_is_bulk_out(endpoint) || usb_endpoint_is_int_out(endpoint)) && (usb_endpoint_num(endpoint) == MLAN_USB_EP_CMD_EVENT || usb_endpoint_num(endpoint) == MLAN_USB_EP_CMD_EVENT_IF2)) { usb_cardp->tx_cmd_ep_type = usb_endpoint_type(endpoint); usb_cardp->tx_cmd_interval = endpoint->bInterval; /* We found a bulk out command/event endpoint */ PRINTM(MCMND, "Tx CMD: max packet size = %d, address = %d ep_type=%d\n", woal_le16_to_cpu( endpoint->wMaxPacketSize), endpoint->bEndpointAddress, usb_cardp->tx_cmd_ep_type); usb_cardp->tx_cmd_ep = endpoint->bEndpointAddress; atomic_set(&usb_cardp->tx_cmd_urb_pending, 0); usb_cardp->tx_cmd_maxpktsize = (__force int)woal_le16_to_cpu( endpoint->wMaxPacketSize); } } if (usb_cardp->boot_state == USB_FW_DNLD) { if (!usb_cardp->tx_cmd_ep || !usb_cardp->rx_cmd_ep) goto error; } else if (usb_cardp->boot_state == USB_FW_READY) { if (!usb_cardp->tx_cmd_ep || !usb_cardp->tx_data_ep || !usb_cardp->rx_cmd_ep || !usb_cardp->rx_data_ep) { PRINTM(MERROR, "%s: invalid endpoint assignment\n", __FUNCTION__); goto error; } if (!usb_cardp->tx_data2_ep) { PRINTM(MERROR, "%s: invalid endpoint assignment\n", __FUNCTION__); PRINTM(MERROR, "%s: DATA2 endpoint is not enumarated\n", __FUNCTION__); } } usb_cardp->tx_aggr_ctrl.enable = MFALSE; usb_cardp->tx_aggr_ctrl.aggr_mode = MLAN_USB_AGGR_MODE_NUM; usb_cardp->tx_aggr_ctrl.aggr_align = MAX(max_tx_buf, MLAN_USB_TX_AGGR_ALIGN); usb_cardp->tx_aggr_ctrl.aggr_max = MLAN_USB_TX_MAX_AGGR_NUM; usb_cardp->tx_aggr_ctrl.aggr_tmo = MLAN_USB_TX_AGGR_TIMEOUT_MSEC * 1000; usb_cardp->rx_deaggr_ctrl.enable = MFALSE; usb_cardp->rx_deaggr_ctrl.aggr_mode = MLAN_USB_AGGR_MODE_NUM; usb_cardp->rx_deaggr_ctrl.aggr_align = MLAN_USB_RX_ALIGN_SIZE; usb_cardp->rx_deaggr_ctrl.aggr_max = MLAN_USB_RX_MAX_AGGR_NUM; usb_cardp->rx_deaggr_ctrl.aggr_tmo = MLAN_USB_RX_DEAGGR_TIMEOUT_USEC; usb_set_intfdata(intf, usb_cardp); card_type = woal_update_card_type(usb_cardp); if (!card_type) { PRINTM(MERROR, "usb probe: woal_update_card_type() failed\n"); goto error; } /* At this point wlan_add_card() will be called */ if (!(woal_add_card(usb_cardp, &usb_cardp->udev->dev, &usb_ops, card_type))) { PRINTM(MERROR, "%s: woal_add_card failed\n", __FUNCTION__); goto error; } #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) /* Note: From 2.6.34.2 onwards, remote wakeup is NOT enabled by * default. So drivers wanting remote wakeup will have to enable * this using - * device_set_wakeup_enable(&udev->dev, 1); * It has been observed that some cards having device attr = * 0xa0 do not support remote wakeup. These cards come * immediately out of the suspend when power/wakeup file is set * to 'enabled'. To support all types of cards i.e. with/without * remote wakeup, we are NOT setting the 'power/wakeup' file * from here. Also in principle, we are not supposed to change * the wakeup policy, which is purely a userspace decision. */ /* if (udev->actconfig->desc.bmAttributes & USB_CONFIG_ATT_WAKEUP) intf->needs_remote_wakeup = 1; */ #endif usb_get_dev(udev); LEAVE(); return 0; } else { PRINTM(MINFO, "Discard the Probe request\n"); PRINTM(MINFO, "VID = 0x%X PID = 0x%X\n", woal_cpu_to_le16(udev->descriptor.idVendor), woal_cpu_to_le16(udev->descriptor.idProduct)); } error: kfree(usb_cardp); usb_cardp = NULL; LEAVE(); return -ENXIO; } /** * @brief Free resource and cleanup * * @param intf Pointer to usb_interface * * @return N/A */ static void woal_usb_disconnect(struct usb_interface *intf) { struct usb_card_rec *cardp = usb_get_intfdata(intf); moal_handle *phandle = NULL; ENTER(); if (!cardp || !cardp->phandle) { PRINTM(MERROR, "Card or phandle is not valid\n"); LEAVE(); return; } phandle = (moal_handle *)cardp->phandle; /* * Update Surprise removed to TRUE * Free all the URB's allocated */ phandle->surprise_removed = MTRUE; /* Card is removed and we can call wlan_remove_card */ PRINTM(MINFO, "Call remove card\n"); woal_remove_card(cardp); usb_set_intfdata(intf, NULL); usb_put_dev(interface_to_usbdev(intf)); kfree(cardp); LEAVE(); return; } /** * @brief killall pending urbs * * @param handle Pointer to moal_handle * * * @return N/A */ void woal_kill_urbs(moal_handle *handle) { ENTER(); handle->is_suspended = MTRUE; woal_usb_unlink_urb(handle->card); LEAVE(); } /** * @brief resubmit urbs * * @param handle Pointer to moal_handle * * * @return N/A */ void woal_resubmit_urbs(moal_handle *handle) { struct usb_card_rec *cardp = handle->card; ENTER(); handle->is_suspended = MFALSE; if (!atomic_read(&cardp->rx_data_urb_pending)) { /* Submit multiple Rx data URBs */ woal_usb_submit_rx_data_urbs(handle); } if (!atomic_read(&cardp->rx_cmd_urb_pending)) { cardp->rx_cmd.pmbuf = woal_alloc_mlan_buffer(handle, MLAN_RX_CMD_BUF_SIZE); if (cardp->rx_cmd.pmbuf) woal_usb_submit_rx_urb(&cardp->rx_cmd, MLAN_RX_CMD_BUF_SIZE); } LEAVE(); } #ifdef CONFIG_PM /** * @brief Handle suspend * * @param intf Pointer to usb_interface * @param message Pointer to pm_message_t structure * * @return MLAN_STATUS_SUCCESS */ static int woal_usb_suspend(struct usb_interface *intf, pm_message_t message) { struct usb_card_rec *cardp = usb_get_intfdata(intf); moal_handle *handle = NULL; int i; int ret = 0; ENTER(); PRINTM(MCMND, "<--- Enter woal_usb_suspend --->\n"); if (!cardp || !cardp->phandle) { PRINTM(MERROR, "Card or moal_handle structure is not valid\n"); ret = 0; goto done; } handle = cardp->phandle; if (handle->is_suspended == MTRUE) { PRINTM(MWARN, "Device already suspended\n"); ret = 0; goto done; } #ifdef STA_SUPPORT for (i = 0; i < MIN(handle->priv_num, MLAN_MAX_BSS_NUM); i++) { if (handle->priv[i] && (GET_BSS_ROLE(handle->priv[i]) == MLAN_BSS_ROLE_STA)) woal_cancel_scan(handle->priv[i], MOAL_IOCTL_WAIT); } #endif /* Enable Host Sleep */ woal_enable_hs(woal_get_priv(handle, MLAN_BSS_ROLE_ANY)); /* Indicate device suspended */ /* The flag must be set here before the usb_kill_urb() calls. * Reason: In the complete handlers, urb->status(= -ENOENT) and * 'is_suspended' flag is used in combination to distinguish * between a suspended state and a 'disconnect' one. */ handle->is_suspended = MTRUE; for (i = 0; i < handle->priv_num; i++) netif_carrier_off(handle->priv[i]->netdev); /* Unlink Rx cmd URB */ if (atomic_read(&cardp->rx_cmd_urb_pending) && cardp->rx_cmd.urb) { usb_kill_urb(cardp->rx_cmd.urb); } /* Unlink Rx data URBs */ if (atomic_read(&cardp->rx_data_urb_pending)) { for (i = 0; i < MVUSB_RX_DATA_URB; i++) { if (cardp->rx_data_list[i].urb) { usb_kill_urb(cardp->rx_data_list[i].urb); usb_init_urb(cardp->rx_data_list[i].urb); } } } /* Unlink Tx data URBs */ for (i = 0; i < MVUSB_TX_HIGH_WMARK; i++) { if (cardp->tx_data_list[i].urb) { usb_kill_urb(cardp->tx_data_list[i].urb); } if (cardp->tx_data2_list[i].urb) { usb_kill_urb(cardp->tx_data2_list[i].urb); } } /* Unlink Tx cmd URB */ if (cardp->tx_cmd.urb) { usb_kill_urb(cardp->tx_cmd.urb); } handle->suspend_wait_q_woken = MTRUE; wake_up_interruptible(&handle->suspend_wait_q); done: PRINTM(MCMND, "<--- Leave woal_usb_suspend --->\n"); LEAVE(); return ret; } /** * @brief Handle resume * * @param intf Pointer to usb_interface * * @return MLAN_STATUS_SUCCESS */ static int woal_usb_resume(struct usb_interface *intf) { struct usb_card_rec *cardp = usb_get_intfdata(intf); moal_handle *handle = NULL; int i; ENTER(); PRINTM(MCMND, "<--- Enter woal_usb_resume --->\n"); if (!cardp || !cardp->phandle) { PRINTM(MERROR, "Card or adapter structure is not valid\n"); goto done; } handle = cardp->phandle; if (handle->is_suspended == MFALSE) { PRINTM(MWARN, "Device already resumed\n"); goto done; } /* Indicate device resumed. * The netdev queue will be resumed only after the urbs * have been resubmitted */ handle->is_suspended = MFALSE; if (!atomic_read(&cardp->rx_data_urb_pending)) { /* Submit multiple Rx data URBs */ woal_usb_submit_rx_data_urbs(handle); } if (!atomic_read(&cardp->rx_cmd_urb_pending)) { cardp->rx_cmd.pmbuf = woal_alloc_mlan_buffer(handle, MLAN_RX_CMD_BUF_SIZE); if (cardp->rx_cmd.pmbuf) woal_usb_submit_rx_urb(&cardp->rx_cmd, MLAN_RX_CMD_BUF_SIZE); } for (i = 0; i < handle->priv_num; i++) if (handle->priv[i]->media_connected == MTRUE) netif_carrier_on(handle->priv[i]->netdev); /* Disable Host Sleep */ if (handle->hs_activated) woal_cancel_hs(woal_get_priv(handle, MLAN_BSS_ROLE_ANY), MOAL_NO_WAIT); #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 24) /* Resume handler may be called due to remote wakeup, force to exit suspend anyway */ #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 35) cardp->udev->autosuspend_disabled = 1; #else #ifdef CONFIG_PM_RUNTIME cardp->udev->dev.power.runtime_auto = 0; #endif #endif /* < 2.6.35 */ #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 33) cardp->udev->autoresume_disabled = 0; #endif /* < 2.6.33 */ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 34) #ifdef CONFIG_PM_RUNTIME atomic_inc(&(cardp->udev)->dev.power.usage_count); #endif #endif /* >= 2.6.34 */ #endif /* >= 2.6.24 */ done: PRINTM(MCMND, "<--- Leave woal_usb_resume --->\n"); LEAVE(); return 0; } #endif /* CONFIG_PM */ /** * @brief This function initialize the tx URBs * * @param handle Pointer to moal_handle structure * * @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE */ mlan_status woal_usb_tx_init(moal_handle *handle) { struct usb_card_rec *cardp = (struct usb_card_rec *)handle->card; int i; mlan_status ret = MLAN_STATUS_SUCCESS; ENTER(); cardp->tx_cmd.handle = handle; cardp->tx_cmd.ep = cardp->tx_cmd_ep; /* Allocate URB for command */ cardp->tx_cmd.urb = usb_alloc_urb(0, GFP_KERNEL); if (!cardp->tx_cmd.urb) { PRINTM(MERROR, "Tx command URB allocation failed\n"); ret = MLAN_STATUS_FAILURE; goto init_exit; } cardp->tx_data_ix = 0; for (i = 0; i < MVUSB_TX_HIGH_WMARK; i++) { cardp->tx_data_list[i].handle = handle; cardp->tx_data_list[i].ep = cardp->tx_data_ep; /* Allocate URB for data */ cardp->tx_data_list[i].urb = usb_alloc_urb(0, GFP_KERNEL); if (!cardp->tx_data_list[i].urb) { PRINTM(MERROR, "Tx data URB allocation failed\n"); ret = MLAN_STATUS_FAILURE; goto init_exit; } cardp->tx_data2_list[i].handle = handle; cardp->tx_data2_list[i].ep = cardp->tx_data2_ep; /* Allocate URB for data */ cardp->tx_data2_list[i].urb = usb_alloc_urb(0, GFP_KERNEL); if (!cardp->tx_data2_list[i].urb) { PRINTM(MERROR, "Tx data URB allocation failed\n"); ret = MLAN_STATUS_FAILURE; goto init_exit; } } init_exit: LEAVE(); return ret; } /** * @brief This function submits the rx data URBs * * @param handle Pointer to moal_handle structure * * @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE */ mlan_status woal_usb_submit_rx_data_urbs(moal_handle *handle) { struct usb_card_rec *cardp = (struct usb_card_rec *)handle->card; int i; mlan_status ret = MLAN_STATUS_FAILURE; t_u32 buffer_len = MLAN_RX_DATA_BUF_SIZE; ENTER(); if (cardp->rx_deaggr_ctrl.enable) { buffer_len = cardp->rx_deaggr_ctrl.aggr_max; if (cardp->rx_deaggr_ctrl.aggr_mode == MLAN_USB_AGGR_MODE_NUM) { buffer_len *= MAX(MLAN_USB_MAX_PKT_SIZE, cardp->rx_deaggr_ctrl.aggr_align); buffer_len = MAX(buffer_len, MLAN_RX_DATA_BUF_SIZE); } } for (i = 0; i < MVUSB_RX_DATA_URB; i++) { /* Submit Rx data URB */ if (!cardp->rx_data_list[i].pmbuf) { if (woal_usb_submit_rx_urb(&cardp->rx_data_list[i], buffer_len)) continue; } ret = MLAN_STATUS_SUCCESS; } LEAVE(); return ret; } /** * @brief This function initialize the rx URBs and submit them * * @param handle Pointer to moal_handle structure * * @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE */ mlan_status woal_usb_rx_init(moal_handle *handle) { struct usb_card_rec *cardp = (struct usb_card_rec *)handle->card; int i; mlan_status ret = MLAN_STATUS_SUCCESS; ENTER(); cardp->rx_cmd.handle = handle; cardp->rx_cmd.ep = cardp->rx_cmd_ep; /* Allocate URB for command/event */ cardp->rx_cmd.urb = usb_alloc_urb(0, GFP_KERNEL); if (!cardp->rx_cmd.urb) { PRINTM(MERROR, "Rx command URB allocation failed\n"); ret = MLAN_STATUS_FAILURE; goto init_exit; } cardp->rx_cmd.pmbuf = woal_alloc_mlan_buffer(handle, MLAN_RX_CMD_BUF_SIZE); if (cardp->rx_cmd.pmbuf) { /* Submit Rx command URB */ if (woal_usb_submit_rx_urb(&cardp->rx_cmd, MLAN_RX_CMD_BUF_SIZE)) { ret = MLAN_STATUS_FAILURE; goto init_exit; } } for (i = 0; i < MVUSB_RX_DATA_URB; i++) { cardp->rx_data_list[i].handle = handle; cardp->rx_data_list[i].ep = cardp->rx_data_ep; /* Allocate URB for data */ cardp->rx_data_list[i].urb = usb_alloc_urb(0, GFP_KERNEL); if (!cardp->rx_data_list[i].urb) { PRINTM(MERROR, "Rx data URB allocation failed\n"); ret = MLAN_STATUS_FAILURE; goto init_exit; } } ret = woal_usb_submit_rx_data_urbs(handle); if (ret) { PRINTM(MERROR, "Rx data URB submission failed\n"); goto init_exit; } init_exit: LEAVE(); return ret; } /** * @brief This function downloads data blocks to device * * @param handle Pointer to moal_handle structure * @param pmbuf Pointer to mlan_buffer structure * @param ep Endpoint to send * @param timeout Timeout value in milliseconds (if 0 the wait is forever) * * @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE */ static mlan_status woal_usb_write_data_sync(moal_handle *handle, mlan_buffer *pmbuf, t_u32 endpoint, t_u32 timeout) { struct usb_card_rec *cardp = handle->card; t_u8 *data = (t_u8 *)(pmbuf->pbuf + pmbuf->data_offset); t_u8 ep = endpoint; t_u32 length = pmbuf->data_len; int actual_length; mlan_status ret = MLAN_STATUS_SUCCESS; int bulk_out_maxpktsize = 512; if (ep == cardp->tx_cmd_ep) bulk_out_maxpktsize = cardp->tx_cmd_maxpktsize; else if (ep == cardp->tx_data_ep) bulk_out_maxpktsize = cardp->tx_data_maxpktsize; else if (ep == cardp->tx_data2_ep) bulk_out_maxpktsize = cardp->tx_data2_maxpktsize; if (length % bulk_out_maxpktsize == 0) length++; /* Send the data block */ ret = usb_bulk_msg(cardp->udev, usb_sndbulkpipe(cardp->udev, ep), (t_u8 *)data, length, &actual_length, timeout); if (ret) { PRINTM(MERROR, "usb_blk_msg for send failed, ret %d\n", ret); ret = MLAN_STATUS_FAILURE; } pmbuf->data_len = actual_length; DBG_HEXDUMP(MIF_D, "write sync", data, actual_length); return ret; } /** * @brief This function read data blocks to device * * @param handle Pointer to moal_handle structure * @param pmbuf Pointer to mlan_buffer structure * @param ep Endpoint to receive * @param timeout Timeout value in milliseconds (if 0 the wait is forever) * * @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE */ static mlan_status woal_usb_read_data_sync(moal_handle *handle, mlan_buffer *pmbuf, t_u32 endpoint, t_u32 timeout) { struct usb_card_rec *cardp = handle->card; t_u8 *data = (t_u8 *)(pmbuf->pbuf + pmbuf->data_offset); t_u8 ep = endpoint; t_u32 buf_len = pmbuf->data_len; int actual_length; mlan_status ret = MLAN_STATUS_SUCCESS; ENTER(); /* Receive the data response */ ret = usb_bulk_msg(cardp->udev, usb_rcvbulkpipe(cardp->udev, ep), data, buf_len, &actual_length, timeout); if (ret) { PRINTM(MERROR, "usb_bulk_msg failed: %d\n", ret); ret = MLAN_STATUS_FAILURE; } pmbuf->data_len = actual_length; DBG_HEXDUMP(MIF_D, "read sync", data, actual_length); LEAVE(); return ret; } /** * @brief This function downloads data/command packet to device * * @param handle Pointer to moal_handle structure * @param pmbuf Pointer to mlan_buffer structure * @param ep Endpoint to send * * @return MLAN_STATUS_PENDING or MLAN_STATUS_FAILURE or * MLAN_STATUS_RESOURCE */ mlan_status woal_write_data_async(moal_handle *handle, mlan_buffer *pmbuf, t_u8 ep) { struct usb_card_rec *cardp = handle->card; urb_context *context = NULL; t_u8 *data = (t_u8 *)(pmbuf->pbuf + pmbuf->data_offset); struct urb *tx_urb = NULL; mlan_status ret = MLAN_STATUS_SUCCESS; t_u32 data_len = pmbuf->data_len; int bulk_out_maxpktsize = 512; ENTER(); /* Check if device is removed */ if (handle->surprise_removed) { PRINTM(MERROR, "Device removed\n"); ret = MLAN_STATUS_FAILURE; goto tx_ret; } if ((ep == cardp->tx_data_ep) && (atomic_read(&cardp->tx_data_urb_pending) >= MVUSB_TX_HIGH_WMARK)) { ret = MLAN_STATUS_RESOURCE; goto tx_ret; } else if ((ep == cardp->tx_data2_ep) && (atomic_read(&cardp->tx_data2_urb_pending) >= MVUSB_TX_HIGH_WMARK)) { ret = MLAN_STATUS_RESOURCE; goto tx_ret; } PRINTM(MINFO, "woal_write_data_async: ep=%d\n", ep); if (ep == cardp->tx_cmd_ep) { context = &cardp->tx_cmd; bulk_out_maxpktsize = cardp->tx_cmd_maxpktsize; } else { if (ep == cardp->tx_data_ep) { bulk_out_maxpktsize = cardp->tx_data_maxpktsize; if (cardp->tx_data_ix >= MVUSB_TX_HIGH_WMARK) cardp->tx_data_ix = 0; context = &cardp->tx_data_list[cardp->tx_data_ix++]; } else if (ep == cardp->tx_data2_ep) { bulk_out_maxpktsize = cardp->tx_data2_maxpktsize; if (cardp->tx_data2_ix >= MVUSB_TX_HIGH_WMARK) cardp->tx_data2_ix = 0; context = &cardp->tx_data2_list[cardp->tx_data2_ix++]; } } if (!context) { PRINTM(MERROR, "Cannot allocate Tx urb_context\n"); ret = MLAN_STATUS_FAILURE; goto tx_ret; } context->handle = handle; context->ep = ep; context->pmbuf = pmbuf; tx_urb = context->urb; if (data_len % bulk_out_maxpktsize == 0) data_len++; /* * Use USB API usb_fill_bulk_urb() to set the * configuration information of the Tx bulk URB * and initialize the Tx callback */ if (ep == cardp->tx_cmd_ep && cardp->tx_cmd_ep_type == USB_ENDPOINT_XFER_INT) { usb_fill_int_urb(tx_urb, cardp->udev, usb_sndintpipe(cardp->udev, ep), data, data_len, woal_usb_tx_complete, (void *)context, cardp->tx_cmd_interval); } else usb_fill_bulk_urb(tx_urb, cardp->udev, usb_sndbulkpipe(cardp->udev, ep), data, data_len, woal_usb_tx_complete, (void *)context); /* We find on Ubuntu 12.10 this flag does not work */ // tx_urb->transfer_flags |= URB_ZERO_PACKET; if (ep == cardp->tx_cmd_ep) atomic_inc(&cardp->tx_cmd_urb_pending); else if (ep == cardp->tx_data_ep) atomic_inc(&cardp->tx_data_urb_pending); else if (ep == cardp->tx_data2_ep) atomic_inc(&cardp->tx_data2_urb_pending); if (usb_submit_urb(tx_urb, GFP_ATOMIC)) { /* Submit URB failure */ PRINTM(MERROR, "Submit EP %d Tx URB failed: %d\n", ep, ret); if (ep == cardp->tx_cmd_ep) atomic_dec(&cardp->tx_cmd_urb_pending); else { if (ep == cardp->tx_data_ep) { atomic_dec(&cardp->tx_data_urb_pending); if (cardp->tx_data_ix) cardp->tx_data_ix--; else cardp->tx_data_ix = MVUSB_TX_HIGH_WMARK; } else if (ep == cardp->tx_data2_ep) { atomic_dec(&cardp->tx_data2_urb_pending); if (cardp->tx_data2_ix) cardp->tx_data2_ix--; else cardp->tx_data2_ix = MVUSB_TX_HIGH_WMARK; } } ret = MLAN_STATUS_FAILURE; } else { if (ep == cardp->tx_data_ep && (atomic_read(&cardp->tx_data_urb_pending) == MVUSB_TX_HIGH_WMARK)) ret = MLAN_STATUS_PRESOURCE; else if (ep == cardp->tx_data2_ep && (atomic_read(&cardp->tx_data2_urb_pending) == MVUSB_TX_HIGH_WMARK)) ret = MLAN_STATUS_PRESOURCE; else ret = MLAN_STATUS_SUCCESS; } tx_ret: if (!ret) ret = MLAN_STATUS_PENDING; LEAVE(); return ret; } /** * @brief This function register usb device and initialize parameter * * @param handle Pointer to moal_handle structure * * @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE */ static mlan_status woal_usb_register_dev(moal_handle *handle) { struct usb_card_rec *cardp = (struct usb_card_rec *)handle->card; mlan_status ret = MLAN_STATUS_SUCCESS; ENTER(); cardp->phandle = handle; LEAVE(); return ret; } static void woal_usb_unregister_dev(moal_handle *handle) { struct usb_card_rec *cardp = (struct usb_card_rec *)handle->card; PRINTM(MMSG, "USB: unregister device\n"); woal_usb_free(cardp); cardp->phandle = NULL; return; } /** * @brief This function registers driver. * * @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE */ mlan_status woal_usb_bus_register(void) { mlan_status ret = MLAN_STATUS_SUCCESS; ENTER(); if (skip_fwdnld) { woal_usb_driver.id_table = woal_usb_table_skip_fwdnld; } /* * API registers the NXP USB driver * to the USB system */ if (usb_register(&woal_usb_driver)) { PRINTM(MFATAL, "USB Driver Registration Failed \n"); ret = MLAN_STATUS_FAILURE; } LEAVE(); return ret; } /** * @brief This function removes usb driver. * * @return N/A */ void woal_usb_bus_unregister(void) { ENTER(); /* API unregisters the driver from USB subsystem */ usb_deregister(&woal_usb_driver); LEAVE(); return; } /** * @brief This function check if this is second mac * * @param handle A pointer to moal_handle structure * @return MTRUE/MFALSE * */ static t_u8 woal_usb_is_second_mac(moal_handle *handle) { return ((struct usb_card_rec *)(handle->card))->second_mac; } #ifdef CONFIG_USB_SUSPEND /** * @brief This function makes USB device to suspend. * * @param handle A pointer to moal_handle structure * * @return 0 --success, otherwise fail */ int woal_enter_usb_suspend(moal_handle *handle) { struct usb_device *udev = ((struct usb_card_rec *)(handle->card))->udev; #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 24) #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34) struct usb_interface *intf = ((struct usb_card_rec *)(handle->card))->intf; #endif /* < 2.6.34 */ #endif /* >= 2.6.24 */ ENTER(); PRINTM(MIOCTL, "USB suspend ioctl (state %d)\n", udev->state); if (handle->is_suspended == MTRUE) { PRINTM(MERROR, "Device already suspended\n"); LEAVE(); return -EFAULT; } handle->suspend_wait_q_woken = MFALSE; #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 24) /* Enter into USB suspend */ usb_lock_device(udev); #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 38) udev->autosuspend_delay = 0; /* Autosuspend delay in jiffies */ #else pm_runtime_set_autosuspend_delay(&udev->dev, 0); /* Autosuspend delay in jiffies */ #endif /* < 2.6.38 */ #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34) udev->autosuspend_disabled = 0; /* /sys/bus/usb/devices/.../power/level < auto */ #endif /* < 2.6.34 */ #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 33) udev->autoresume_disabled = 0; #endif /* < 2.6.33 */ usb_unlock_device(udev); #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34) #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 32) intf->pm_usage_cnt = 1; #else atomic_set(&intf->pm_usage_cnt, 1); #endif /* < 2.6.32 */ usb_autopm_put_interface(intf); #else usb_lock_device(udev); atomic_set(&udev->dev.power.usage_count, 1); usb_enable_autosuspend(udev); usb_unlock_device(udev); #endif /* < 2.6.34 */ #endif /* >= 2.6.24 */ /* Wait for suspend to complete */ wait_event_interruptible(handle->suspend_wait_q, handle->suspend_wait_q_woken); LEAVE(); return 0; } /** * @brief This function makes USB device to resume. * * @param handle A pointer to moal_handle structure * * @return 0 --success, otherwise fail */ int woal_exit_usb_suspend(moal_handle *handle) { struct usb_device *udev = ((struct usb_card_rec *)(handle->card))->udev; #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 24) #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34) struct usb_interface *intf = ((struct usb_card_rec *)(handle->card))->intf; #endif /* < 2.6.34 */ #endif /* >= 2.6.24 */ ENTER(); PRINTM(MIOCTL, "USB resume ioctl (state %d)\n", udev->state); if (handle->is_suspended == MFALSE || udev->state != USB_STATE_SUSPENDED) { PRINTM(MERROR, "Device already resumed\n"); LEAVE(); return -EFAULT; } #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 24) /* Exit from USB suspend */ usb_lock_device(udev); #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34) udev->autosuspend_disabled = 1; /* /sys/bus/usb/devices/.../power/level < on */ #endif /* < 2.6.34 */ #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 33) udev->autoresume_disabled = 0; #endif /* < 2.6.33 */ usb_unlock_device(udev); #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34) #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 32) intf->pm_usage_cnt = 0; #else atomic_set(&intf->pm_usage_cnt, 0); #endif /* < 2.6.32 */ usb_autopm_get_interface(intf); #else usb_lock_device(udev); atomic_set(&udev->dev.power.usage_count, 0); usb_disable_autosuspend(udev); usb_unlock_device(udev); #endif /* < 2.6.34 */ #endif /* >= 2.6.24 */ LEAVE(); return 0; } #endif /* CONFIG_USB_SUSPEND */ /** * @brief This function will submit rx urb. * * @param handle Pointer to moal_handle * @param ep Endpoint to re-submit urb * * @return N/A */ void woal_submit_rx_urb(moal_handle *handle, t_u8 ep) { struct usb_card_rec *cardp = (struct usb_card_rec *)handle->card; ENTER(); if ((ep == cardp->rx_cmd_ep) && (!atomic_read(&cardp->rx_cmd_urb_pending))) { woal_usb_submit_rx_urb(&cardp->rx_cmd, MLAN_RX_CMD_BUF_SIZE); } LEAVE(); return; } /** * @brief This function dump firmware memory to file * * @param phandle A pointer to moal_handle * * @return N/A */ static void woal_usb_dump_fw_info(moal_handle *phandle) { moal_private *priv = NULL; mlan_ioctl_req *req = NULL; mlan_ds_misc_cfg *pcfg_misc = NULL; mlan_status status = MLAN_STATUS_SUCCESS; ENTER(); priv = woal_get_priv(phandle, MLAN_BSS_ROLE_ANY); if (!priv) { PRINTM(MERROR, "woal_usb_dump_fw_info: priv is NULL!\n"); goto done; } /* Allocate an IOCTL request buffer */ req = woal_alloc_mlan_ioctl_req(sizeof(mlan_ds_misc_cfg)); if (req == NULL) { PRINTM(MERROR, "woal_usb_dump_fw_info: alloc req fail!\n"); goto done; } /* Fill request buffer */ pcfg_misc = (mlan_ds_misc_cfg *)req->pbuf; pcfg_misc->sub_command = MLAN_OID_MISC_FW_DUMP_EVENT; req->req_id = MLAN_IOCTL_MISC_CFG; req->action = MLAN_ACT_GET; /* Send IOCTL request to MLAN */ status = woal_request_ioctl(priv, req, MOAL_IOCTL_WAIT); if (status != MLAN_STATUS_PENDING) kfree(req); phandle->is_fw_dump_timer_set = MTRUE; woal_mod_timer(&phandle->fw_dump_timer, MOAL_TIMER_5S); done: LEAVE(); return; } static mlan_status woal_usb_get_fw_name(moal_handle *handle) { mlan_status ret = MLAN_STATUS_SUCCESS; #if defined(USB8997) || defined(USB9098) || defined(USB9097) || \ defined(USB8978) || defined(USBNW62X) t_u32 revision_id = 0; t_u32 strap = 0; #endif struct usb_card_rec *cardp = (struct usb_card_rec *)handle->card; #if defined(USB9098) moal_handle *ref_handle = NULL; #endif ENTER(); if (handle->params.fw_name) goto done; if (cardp->boot_state == USB_FW_READY) goto done; #ifdef USB8801 if (IS_USB8801(handle->card_type)) goto done; #endif #if defined(USB8997) || defined(USB9098) || defined(USB9097) || \ defined(USB8978) || defined(USBNW62X) ret = woal_check_chip_revision(handle, &revision_id, &strap); if (ret != MLAN_STATUS_SUCCESS) { PRINTM(MFATAL, "Chip revision check failure!\n"); ret = MLAN_STATUS_FAILURE; goto done; } PRINTM(MCMND, "revision=0x%x, strap=0x%x\n", revision_id, strap); #endif #ifdef USB8997 if (IS_USB8997(handle->card_type)) { if (strap == CARD_TYPE_USB_UART) strcpy(handle->card_info->fw_name, USBUART8997_DEFAULT_COMBO_FW_NAME); else if (strap != 0) strcpy(handle->card_info->fw_name, USBUSB8997_DEFAULT_COMBO_FW_NAME); } #endif #ifdef USB8978 if (IS_USB8978(handle->card_type)) { if (strap == CARD_TYPE_USB_UART) strcpy(handle->card_info->fw_name, USBUART8978_DEFAULT_COMBO_FW_NAME); else if (strap != 0) strcpy(handle->card_info->fw_name, USBUSB8978_DEFAULT_COMBO_FW_NAME); } #endif #ifdef USB9098 if (IS_USB9098(handle->card_type)) { if (cardp->second_mac) { ref_handle = (moal_handle *)handle->pref_mac; if (ref_handle) { strcpy(handle->card_info->fw_name, ref_handle->card_info->fw_name); strcpy(handle->card_info->fw_name_wlan, ref_handle->card_info->fw_name_wlan); } goto done; } switch (revision_id) { case USB9098_Z1Z2: if (strap != 0) { if (strap == CARD_TYPE_USB_UART) strcpy(handle->card_info->fw_name, USBUART9098_DEFAULT_COMBO_FW_NAME); else strcpy(handle->card_info->fw_name, USBUSB9098_DEFAULT_COMBO_FW_NAME); } strcpy(handle->card_info->fw_name_wlan, USB9098_DEFAULT_WLAN_FW_NAME); break; case USB9098_A0: case USB9098_A1: case USB9098_A2: if (strap != 0) { if (strap == CARD_TYPE_USB_UART) strcpy(handle->card_info->fw_name, USBUART9098_COMBO_V1_FW_NAME); else strcpy(handle->card_info->fw_name, USBUSB9098_COMBO_V1_FW_NAME); } strcpy(handle->card_info->fw_name_wlan, USB9098_WLAN_V1_FW_NAME); break; } } #endif #ifdef USB9097 if (IS_USB9097(handle->card_type)) { switch (revision_id) { case USB9097_B0: case USB9097_B1: if (strap != 0) { if (strap == CARD_TYPE_USB_UART) strcpy(handle->card_info->fw_name, USBUART9097_COMBO_V1_FW_NAME); else strcpy(handle->card_info->fw_name, USBUSB9097_COMBO_V1_FW_NAME); } strcpy(handle->card_info->fw_name_wlan, USB9097_WLAN_V1_FW_NAME); break; } } #endif #ifdef USBNW62X if (IS_USBNW62X(handle->card_type)) { if (strap == CARD_TYPE_USB_UART) strcpy(handle->card_info->fw_name, USBUARTNW62X_COMBO_FW_NAME); else strcpy(handle->card_info->fw_name, USBUSBNW62X_COMBO_FW_NAME); } #endif done: PRINTM(MCMND, "combo fw:%s wlan fw:%s \n", handle->card_info->fw_name, handle->card_info->fw_name_wlan); LEAVE(); return ret; } static moal_if_ops usb_ops = { .register_dev = woal_usb_register_dev, .unregister_dev = woal_usb_unregister_dev, .read_data_sync = woal_usb_read_data_sync, .write_data_sync = woal_usb_write_data_sync, .get_fw_name = woal_usb_get_fw_name, .dump_fw_info = woal_usb_dump_fw_info, .is_second_mac = woal_usb_is_second_mac, };