# File : uaputl.conf ap_config={ SSID="NXP Micro AP" # SSID of Micro AP, use '\' as an escape character before '"' character in SSID BeaconPeriod=100 # Beacon period in TU Channel=6 # Radio Channel 6 # Channel=0,1 # auto channel select (MCS mode) # Channel=6,2 # primary channel 6, secondary channel above. # Channel=6,4 # primary channel 6, secondary channel below ChanList=1,6,11 # Scan channel list # AP_MAC=00:34:22:77:46:41 # MAC address of AP Band=0 # 0 for 2.4GHz band # 1 for 5GHz band Rate=0x82,0x84,0x8b,0x96,0x0C,0x12,0x18,0x24,0x30,0x48,0x60,0x6c # Set of data rate that a station # in the BSS may use # (in unit of 500 kilobit/s) TxPowerLevel=13 # Transmit power level in dBm BroadcastSSID=1 # Broadcast SSID feature # 1: Enable 0:Disable RTSThreshold=2347 # RTS threshold value FragThreshold=2346 # Fragmentation threshold value DTIMPeriod=1 # DTIM period in beacon periods MCBCdataRate=0 # MCBC rate to use for packet transmission # 0:auto # >0 fix rate (in unit of 500 kilobit/s) # TxBeaconRate=0 # Beacon rate to use for Beacon transmission # 0:auto # >0 fix rate (in unit of 500 kilobit/s) PktFwdCtl=1 # Packet forwarding control # 0: forward all packets to the host # 1: firmware handles intr-BSS packets StaAgeoutTimer=1800 # Inactive client station age out timer value # in units of 100ms PSStaAgeoutTimer=400 # Inactive client PS station age out timer value # in units of 100ms MaxStaNum=10 # Max number of stations allowed to connect Retrylimit=7 # Retry limit to use for packet transmissions AuthMode=0 # 0:Open authentication # 1:shared key authentication # 3: WPA3 SAE Protocol=1 # protocol to use # 1: No security 2: Static WEP # 8: WPA 32: WPA2 40:WPA2 Mixed Mode # 64: WPA3 SAE RSNReplayProtection=0 # RSN replay protection 0: disabled, 1: enabled PairwiseUpdateTimeout=100 #Pairwise Handshake update timeout: 100ms PairwiseHandshakeRetries=3 #Pairwise Handshake retries: 3 GroupwiseUpdateTimeout=100 #Groupwise Handshake update timeout: 100ms GroupwiseHandshakeRetries=3 #Groupwise Handshake retries: 3 # **** WEP security setting****** # KeyIndex=0 # Index of WEP key to use (0 to 3) # Sample Key configurations are # Key_0="55555" # Key_1=1234567890 # Key_2="1234567890123" # Key_3=12345678901234567890123456 # **** Pairwise Cipher setting****** # Configure both of the following for Protocol=40 # PwkCipherWPA=4 # Pairwise cipher type # 4: TKIP 8: AES CCMP # 12: AES CCMP + TKIP # PwkCipherWPA2=8 # Pairwise cipher type # 4: TKIP 8: AES CCMP # 12: AES CCMP + TKIP # **** Group Cipher setting****** # GwkCipher=4 # group cipher type # 4: TKIP 8: AES CCMP # PSK="1234567890" # WPA/WPA2 passphrase GroupRekeyTime= 86400 # Group key re-key interval, in second. # 0 mean never re-key Enable11n=1 # 1 to enable, 0 to disable HTCapInfo=0x111c # HTCapInfo # Bit 15-13: Reserved set to 0 # Bit 12: DSS/CCK mode in 40MHz enable/disable # Bit 11-10: Reserved set to 0 # Bit 9-8: Reserved set to 0x01 # Bit 7: Reserved set to 0 # Bit 6: Short GI in 40 Mhz enable/disable # Bit 5: Short GI in 20 Mhz enable/disable # Bit 4: Green field enable/disble # Bit 3-2: Reserved set to 1 # Bit 1: 20/40 Mhz enable disable. # Bit 0: Reserved set to 0 AMPDU=0x03 # AMPDU # Bit 7-5: Reserved set to 0 # Bit 4-2: Minimum MPDU Start spacing # Set to 0 for no restriction # Set to 1 for 1/4 us # Set to 2 for 1/2 us # Set to 3 for 1 us # Set to 4 for 2 us # Set to 5 for 4 us # Set to 6 for 8 us # Set to 7 for 16 us # Bit 1-0: Max A-MPDU length HT_MCS_MAP=0x0000ffff # Bit 7-0: MCS_SET_0 # Bit 15-8:MCS_SET_1 # Enable2040Coex=1 #Enable 20/40 coex feature #802.11D specific configuration 11d_enable=0 # 0-disable 1-enable # country=US # country information # PreambleType=2 #0 to set auto, 1 to set short, 2 to set long preamble } ap_mac_filter={ FilterMode=0 # Mode of filter table # 0: filter table is disabled # 1: allow MAC address in the filter table to associate # 2: block MAC address in the filter table Count=0 # Number of entries in filter table,up to 16 #Sample mac settings are # mac_1=00:50:23:45:76:22 # mac address # mac_2=00:34:22:77:46:34 # mac address } # Wmm param setting Wmm_parameters={ Qos_info=0x80 AC_BE Aifsn=1 Ecw_max=1 Ecw_min=1 Tx_op=1 AC_BK Aifsn=2 Ecw_max=2 Ecw_min=2 Tx_op=2 AC_VI Aifsn=3 Ecw_max=3 Ecw_min=3 Tx_op=3 AC_VO Aifsn=4 Ecw_max=4 Ecw_min=4 Tx_op=4 }