#	File : robust_btc.conf

######################### Robust Coex command ###############
mode_get={
    CmdCode=0x00e0		# do NOT change this line
    Action:2=0			# GET
    RSVD:2=0

    # Robust Coex Mode TLV
    RobustCoexTlvType:2=0x0160
    RobustCoexTlvLength:2={
        Enable:1=0x00	# Read-back Coex mode(s)
        Reserved:3=0
    }
}

mode_timeshare={
    CmdCode=0x00e0		# do NOT change this line
    Action:2=1			# SET
    RSVD:2=0

    # Robust Coex Mode TLV
    RobustCoexTlvType:2=0x0160
    RobustCoexTlvLength:2={
        # All the modes below are mutually exclusive of each other;
        Enable:1=0x01       # Bit0: Enable 2x2 or 1x1 Time Distribute(TMD)
                            #  Robust Coex(RBC) mode, when uAP bss start,
                            #  uAP TMD RBC scheme is enabled,
                            #  STA TMD RBC scheme is disabled.
        Reserved:3=0
    }
}

mode_spatial={
    CmdCode=0x00e0		# do NOT change this line
    Action:2=1			# SET
    RSVD:2=0

    # Robust Coex Mode TLV
    RobustCoexTlvType:2=0x0160
    RobustCoexTlvLength:2={
        # All the modes below are mutually exclusive of each other;
        Enable:1=0x82       # Bit1: Enable 1x1 SMPS Spatial RBC Mode, e.g. 0x02
                            # Bit7: Enable uAP+STA SMPS RBC Mode,
                            #  when uAP bss start, uAP SMPS RBC scheme enable,
                            #  must combined with BIT1 or BIT2, e.g. 0x82, 0x84.
        Reserved:3=0
    }
}

mode_none={
    CmdCode=0x00e0		# do NOT change this line
    Action:2=1			# SET
    RSVD:2=0

    # Robust Coex Mode TLV
    RobustCoexTlvType:2=0x0160
    RobustCoexTlvLength:2={
        Enable:1=0          # Concurrent Coex mode. Used for chips which has
                            # separate antenna for BT
        Reserved:3=0
    }
}

mode_2={
    CmdCode=0x00e0          # do NOT change this line
    Action:2=1              # SET
    RSVD:2=0

    # Robust Coex Mode TLV
    RobustCoexTlvType:2=0x0160
    RobustCoexTlvLength:2={
        Enable:1=0x20          # Concurrent Coex mode with Tx power control and Rx De-sense.
                               # Used for chips which has separate antenna for BT
        Reserved:3=0
    }
}

gpio_cfg={
    CmdCode=0x00e0          # do NOT change this line
    Action:2=1              # SET
    RSVD:2=0

    # Robust Coex Mode TLV
    RobustCoexTlvType:2=0x021B
    RobustCoexTlvLength:2={
        Enable:1=0x1        # enable GPIO cfg for external bt request
        gpionum:1=4         # gpio 4
        gpiopolarity:1=1    # Polarity High
    }
}

external_coex_config={
    CmdCode=0x00e0
    Action:2=1                          //0x0 get, 0x1 set
    RSVD:2=0
    RobustCoexTlvType:2=0x0238          //TLV ID
    RobustCoexTlvLength:2={
        Enabled:1=0x01                  // 0x00 disable, 0x01 enalbe

        ExtHighInputPriority:1=0x02     // Input priority: 0x00 Input Low Priority, 0x01 Input Medium Priority, 0x02 Input High Priority
        ExtLowInputPriority:1=0x02

        ExtPriGPIONum:1=0x06;           // Input Priority signal GPIO pin number
        ExtPriGPIOPolarity:1=0x01;      // Polarity: 0x00 Active Low, 0x01 Active High

        ExtReqGPIONum:1=0x07;           // Input Request signal GPIO pin number
        ExtReqGPIOPolarity:1=0x01;      // Polarity: 0x00 Active Low, 0x01 Active High

        ExtGrntGPIONum:1=0x05;          // Output Grant signal GPIO pin number
        ExtGrntGPIOPolarity:1=0x01;     // Polarity: 0x00 Active Low, 0x01 Active High

        }
}

#In Station generic case
#BT time is set as BTTime
#Wlan time is set as Wlan Time
generictime={
    CmdCode=0x00e0
    Action:2=1
    RSVD:2=0
    RobustCoexTlvType:2=0x0390
    RobustCoexTlvLength:2={
        Enable:2=0x01
        BtTime:2=10000           #(10ms) BTTime must be less than 65535
        WlanTime:2=40000         #(40ms) WlanTime must be less than 65535
     }
}

#In Station A2DP case
#BT time is set as BTTime
#Wlan time is set as Wlan Time
a2dptime={
    CmdCode=0x00e0
    Action:2=1
    RSVD:2=0
    RobustCoexTlvType:2=0x0391
    RobustCoexTlvLength:2={
        Enable:2=0x01
        BtTime:2=10000           #(10ms)   BTTime must be less than 65535
        WlanTime:2=39500         #(39.5ms) WlanTime must be less than 65535
     }
}

#In Station inquiry case
#BT time is set as BTTime
#Wlan time is set as Wlan Time
inquirytime={
    CmdCode=0x00e0
    Action:2=1
    RSVD:2=0
    RobustCoexTlvType:2=0x0392
    RobustCoexTlvLength:2={
        Enable:2=0x01
        BtTime:2=21215           #(21.215ms) BTTime must be less than 65535
        WlanTime:2=11000         #(11ms)     WlanTime must be less than 65535
     }
}

#In Ap generic case
#BT time is BTTimeBusy when BT has traffic
#BT time is BTTimeIdle when BT is idle
#Wlan time is WlanTimeBusy when Wlan has traffic
#Wlan time is WlanTimeIdle when Wlan is idle
ap_generictime={
    CmdCode=0x00e0
    Action:2=1
    RSVD:2=0
    RobustCoexTlvType:2=0x0393
    RobustCoexTlvLength:2={
       Enable:2=0x01
       BtTime_MAX:2=23000         #(23ms)   BTTime(BT Busy) must be less than 28767
       BtTime_MIN:2=6500          #(6.5ms)  BTTime(BT Idle) must be less than 28767
       WlanTime_MAX:2=18000       #(18ms)   WlanTime(Wlan Busy) must be less than 32767
       WlanTime_MIN:2=5750        #(5.75ms) WlanTime(Wlan Idle) must be less than 32767
    }
}

#In Ap A2DP case
#BT time is change from BTTimeMax to BTTimeMin
#Wlan time is change from WlanTimeMax to WlanTimeMin
ap_a2dptime={
    CmdCode=0x00e0
    Action:2=1
    RSVD:2=0
    RobustCoexTlvType:2=0x0394
    RobustCoexTlvLength:2={
        Enable:2=0x01
        BtTimebusy:2=23000           #(23ms)   Maximum BTTime must be less than 32767
        BtTimeidle:2=6500            #(6.5ms)  Minimum BTTime must be less than 32767
        WlanTimebusy:2=18000         #(18ms)   Maximum WlanTime must be less than 32767
        WlanTimeidle:2=5750          #(5.75ms) Minimum WlanTime must be less than 32767
        }
}

#In Ap inquiry case
#BT time is set as BTTime
#Wlan time is set as Wlan Time
ap_inquirytime={
    CmdCode=0x00e0
    Action:2=1
    RSVD:2=0
    RobustCoexTlvType:2=0x0395
    RobustCoexTlvLength:2={
        Enable:2=0x01
        BtTime:2=28750               #(28.75ms) BTTime must less than 32767
        WlanTime:2=20000             #(20ms)    WlanTime must be less than 32767
        }
}
######################### Robust Coex command ###############