imx-firmware/nxp/FwImage_8987/wifi_mod_para_sd8987.conf
yang.tian 227c1c042e MA-17460 Use config file to config wifi parameters with NXP mxmdriver
Update wifi config file for 8987 on Android.

Signed-off-by: yang.tian <yang.tian@nxp.com>
2020-07-02 10:27:44 +08:00

181 lines
3.5 KiB
Text

# Not matter how many spaces or tabs are inserted in a line,
# components and ending format must be exactly same as given
# example:
#
# <card_type>[_<block_id>] = {
# key=value
# }
#
# card_type : 8XXX (mandatory)
# block_id : configuration block id (optional )
# key : module parameter name
# value : value for module parameter
# for string value, no need to add ""
#
# card_type supported: 8887/8897/8997/8977/8987/9098
# block_id: support same chipset with
# different module parameter.
# For example to support mutiple SD8997 cards, usr can
# specify the configuration block id number [0 - 9], if not
# specified, it is taken as 0 by default.
#
# debug related module parameters could not be set via module
# configure file, ex. drvdbg could not be set in this file
#
# line started with "#" will be ignored
# refer to the USB8997_1 for parameters that could be set in
# this configuration file, and set the corresponding value
# according to your real needs
SD8997 = {
cfg80211_wext=0xf
wfd_name=p2p
max_vir_bss=1
cal_data_cfg=nxp/WlanCalData_ext_8997_QFN_TB.conf
drv_mode=7
}
#SD8997_1 = {
# cfg80211_wext=0xf
# wfd_name=wfd0
# max_vir_bss=1
# cal_data_cfg=nxp/WlanCalData_ext_8997_QFN_TB.conf
# drv_mode=5
#}
#SD8887 = {
# cfg80211_wext=0xf
# wfd_name=p2p
# max_vir_bss=1
# cal_data_cfg=nxp/WlanCalData_ext_8997_QFN_TB.conf
# drv_mode=7
#}
#SD8897 = {
# cfg80211_wext=0xf
# wfd_name=p2p
# max_vir_bss=1
# cal_data_cfg=nxp/WlanCalData_ext_8997_QFN_TB.conf
# drv_mode=7
#}
#SD8977 = {
# cfg80211_wext=0xf
# wfd_name=p2p
# max_vir_bss=1
# cal_data_cfg=nxp/WlanCalData_ext_8997_QFN_TB.conf
# drv_mode=7
#}
SD8987 = {
sta_name=wlan
uap_name=wlan
wfd_name=p2p
max_vir_bss=1
cfg80211_wext=0xf
cal_data_cfg=none
fw_name=sdiouart8987_combo_v0.bin
}
USB8997 = {
cfg80211_wext=0xf
wfd_name=p2p
max_vir_bss=1
cal_data_cfg=nxp/WlanCalData_ext_8997_QFN_TB.conf
drv_mode=7
}
PCIE8997 = {
cfg80211_wext=0xf
wfd_name=p2p
max_vir_bss=1
cal_data_cfg=nxp/WlanCalData_ext_8997_QFN_TB.conf
drv_mode=7
}
PCIE9098_0 = {
cfg80211_wext=0xf
wfd_name=p2p
max_vir_bss=1
cal_data_cfg=none
drv_mode=7
mac_addr=00:50:43:20:12:34
}
PCIE9098_1 = {
cfg80211_wext=0xf
wfd_name=p2p
max_vir_bss=1
cal_data_cfg=none
drv_mode=7
mac_addr=00:50:43:20:52:56
}
#USB8997 = {
# hw_test=0
# fw_name="nxp/usbusb8997_combo_v4.bin"
# req_fw_nowait=1
# fw_reload=3
# fw_serial=1
# fw_region=0
# mac_addr=00:50:43:22:1e:3d
# mfg_mode=0
# drv_mode=0x5
# max_sta_bss=1
# sta_name=wlan
# max_uap_bss=1
# uap_name=uap
# wfd_name=p2p
# max_vir_bss=1
# max_mpl_bss=1
# nan_name=nan
# max_nan_bss=1
# max_11p_bss=1
# auto_ds=0
# ps_mode=1
# max_tx_buf=4096
# intmode=0
# gpiopin=0
# pm_keep_power=0
# shutdown_hs=1
# cfg_11d=1
# start_11ai_scan=0
# oob_mode=0
# sdio_pd=1
# cal_data_cfg=nxp/WlanCalData_ext_8997_QFN_TB.conf
# txpwrtlimit_cfg=nxp/txpwr_limit.conf
# cntry_txpwrt=0
# init_hostcmd_cfg=nxp/init_hostcmd_cfg.conf
# minicard_pwrup=0
# cfg80211_wext=0xf
# skip_fwdnld=0
# wq_sched_prio=0
# wq_sched_policy=0
# rx_work=1
# aggrctrl=1
# usb_aggr=1
# pcie_int_mode=1
# low_power_mode_enable=1
# wakelock_timeout=10
# dev_cap_mask=0xffffffff
# sdio_rx_aggr=1
# pmic=1
# antcfg=0
# uap_oper_ctrl=0
# hs_wake_interval=400
# indication_gpio=0xff
# disconnect_on_suspend=0
# hs_mimo_switch=1
# indrstcfg=0xffffffff
# fixed_beacon_buffer=0
# GoAgeoutTime=0
# gtk_rekey_offload=1
# multi_dtim=0
# inact_tmo=0
# usb_fw_option=1
# napi=1
# dfs_offload=1
# cfg80211_drcs=1
# drcs_chantime_mode=0
# reg_alpha2=US
#}