# Not matter how many spaces or tabs are inserted in a line, # components and ending format must be exactly same as given # example: # # [_] = { # key=value # } # # card_type : 8XXX (mandatory) # block_id : configuration block id (optional ) # key : module parameter name # value : value for module parameter # for string value, no need to add "" # # card_type supported: 8887/8897/8997/8977/8987/9098 # block_id: support same chipset with # different module parameter. # For example to support mutiple SD8997 cards, usr can # specify the configuration block id number [0 - 9], if not # specified, it is taken as 0 by default. # # debug related module parameters could not be set via module # configure file, ex. drvdbg could not be set in this file # # line started with "#" will be ignored # refer to the USB8997_1 for parameters that could be set in # this configuration file, and set the corresponding value # according to your real needs SD8997 = { cfg80211_wext=0xf max_vir_bss=1 cal_data_cfg=none ps_mode=1 auto_ds=1 host_mlme=1 fw_name=nxp/sdiouart8997_combo_v4.bin } #SD8997_1 = { # cfg80211_wext=0xf # wfd_name=wfd0 # max_vir_bss=1 # cal_data_cfg=nxp/WlanCalData_ext_8997_QFN_TB.conf # drv_mode=5 #} #SD8887 = { # cfg80211_wext=0xf # wfd_name=p2p # max_vir_bss=1 # cal_data_cfg=nxp/WlanCalData_ext_8997_QFN_TB.conf # drv_mode=7 #} #SD8897 = { # cfg80211_wext=0xf # wfd_name=p2p # max_vir_bss=1 # cal_data_cfg=nxp/WlanCalData_ext_8997_QFN_TB.conf # drv_mode=7 #} #SD8977 = { # cfg80211_wext=0xf # wfd_name=p2p # max_vir_bss=1 # cal_data_cfg=nxp/WlanCalData_ext_8997_QFN_TB.conf # drv_mode=7 #} SD8987 = { cfg80211_wext=0xf max_vir_bss=1 cal_data_cfg=none ps_mode=1 auto_ds=1 host_mlme=1 fw_name=nxp/sdiouart8987_combo_v0.bin } #USB8997 = { # cfg80211_wext=0xf # max_vir_bss=1 # cal_data_cfg=nxp/WlanCalData_ext_8997_QFN_TB.conf # drv_mode=7 #} PCIE8997 = { cfg80211_wext=0xf max_vir_bss=1 cal_data_cfg=none ps_mode=1 auto_ds=1 host_mlme=1 fw_name=nxp/pcieuart8997_combo_v4.bin } PCIE9098_0 = { cfg80211_wext=0xf max_vir_bss=1 cal_data_cfg=none ps_mode=1 auto_ds=1 host_mlme=1 mac_addr=00:50:43:20:12:34 fw_name=nxp/pcieuart9098_combo_v1.bin } PCIE9098_1 = { cfg80211_wext=0xf max_vir_bss=1 cal_data_cfg=none ps_mode=1 auto_ds=1 host_mlme=1 mac_addr=00:50:43:20:52:56 fw_name=nxp/pcieuart9098_combo_v1.bin } SD9098_0 = { cfg80211_wext=0xf max_vir_bss=1 cal_data_cfg=none ps_mode=1 auto_ds=1 host_mlme=1 mac_addr=00:50:43:20:12:34 fw_name=nxp/sdiouart9098_combo_v1.bin } SD9098_1 = { cfg80211_wext=0xf max_vir_bss=1 cal_data_cfg=none ps_mode=1 auto_ds=1 host_mlme=1 mac_addr=00:50:43:20:52:56 fw_name=nxp/sdiouart9098_combo_v1.bin } SDIW416 = { cfg80211_wext=0xf max_vir_bss=1 cal_data_cfg=none ps_mode=1 auto_ds=1 host_mlme=1 fw_name=nxp/sdiouartiw416_combo_v0.bin } SD8801 = { cfg80211_wext=0xf max_vir_bss=1 cal_data_cfg=none ps_mode=1 auto_ds=1 host_mlme=1 fw_name=nxp/sd8801_uapsta.bin } SD9177 = { cfg80211_wext=0xf max_vir_bss=1 cal_data_cfg=none ps_mode=1 auto_ds=1 host_mlme=1 fw_name=nxp/sduart_nw61x_v1.bin } #USB8997 = { # hw_test=0 # fw_name="nxp/usbusb8997_combo_v4.bin" # req_fw_nowait=1 # fw_reload=3 # fw_serial=1 # mac_addr=00:50:43:22:1e:3d # mfg_mode=0 # drv_mode=0x5 # max_sta_bss=1 # sta_name=wlan # max_uap_bss=1 # uap_name=uap # wfd_name=p2p # max_vir_bss=1 # max_mpl_bss=1 # nan_name=nan # max_nan_bss=1 # max_11p_bss=1 # auto_ds=0 # ps_mode=1 # max_tx_buf=4096 # intmode=0 # gpiopin=0 # pm_keep_power=0 # shutdown_hs=1 # cfg_11d=1 # start_11ai_scan=0 # oob_mode=0 # sdio_pd=1 # cal_data_cfg=nxp/WlanCalData_ext_8997_QFN_TB.conf # txpwrtlimit_cfg=nxp/txpwr_limit.conf # cntry_txpwrt=0 # init_hostcmd_cfg=nxp/init_hostcmd_cfg.conf # minicard_pwrup=0 # cfg80211_wext=0xf # skip_fwdnld=0 # wq_sched_prio=0 # wq_sched_policy=0 # rx_work=1 # aggrctrl=1 # usb_aggr=1 # pcie_int_mode=1 # low_power_mode_enable=1 # wakelock_timeout=10 # dev_cap_mask=0xffffffff # sdio_rx_aggr=1 # pmic=1 # antcfg=0 # uap_oper_ctrl=0 # hs_wake_interval=400 # indication_gpio=0xff # disconnect_on_suspend=0 # hs_mimo_switch=1 # indrstcfg=0xffffffff # fixed_beacon_buffer=0 # GoAgeoutTime=0 # gtk_rekey_offload=1 # multi_dtim=0 # inact_tmo=0 # usb_fw_option=1 # napi=1 # dfs_offload=1 # cfg80211_drcs=1 # drcs_chantime_mode=0 # reg_alpha2=US #}