Firmware:
PCIE-UART W9098 Firmware version 17.92.5.p1
SDIO-UART W8997 Firmware version 16.92.10.p216
PCIE-UART W8997 Firmware version 16.92.10.p212
SDIO-UART W8987 Firmware version 16.92.10.p209
WLAN Bug Fixes:
---------------
1. PCIE9098: Fixed issues seen during stress test with data traffic.
BT Bug Fixes:
-------------
None.
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Firmware:
PCIE-UART W9098 Firmware version 17.92.1.p55
SDIO-UART W8997 Firmware version 16.92.10.p156
PCIE-UART W8997 Firmware version 16.92.10.p212
SDIO-UART W8987 Firmware version 16.92.10.p209
WLAN Bug Fixes:
---------------
1. Added Wi-Fi VU fixes for four firmwares
2. PCIE9098: Fixed 11AX pre-cert/EU-cert test issues
3. PCIE9098: Fixed DFS channel switch compliance related issue
4. PCIE9098: Fixed WPA3 band switch issue
5. PCIE9098: Fixed issues related to scan stress
6. PCIE9098: Fixed issues seen during traffic stress test
7. SDIO8997: Fixed issues seen during traffic stress test
BT Bug Fixes:
-------------
1. PCIE9098: Fixed various issues related to device hang
2. PCIE9098: Fixed issues with BT mode switch
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Firmware:
PCIE-UART W8997 Firmware version 16.92.10.p211
PCIE-UART W9098 Firmware version 17.92.1.p46
SDIO-UART W8997 Firmware version 16.92.10.p150
WLAN Bug Fixes:
---------------
1. Fixed an issue where wakeup card timeout is seen when STAUT connects
to Ext-AP
2. Added multiple fixes for 11ax pre-cert issues
3. Added RF Test Mode support
4. Added fixes for scan command timeout seen during stress tests
5. Added fixes for 11ac pre-cert failures
BT Bug Fixes:
-------------
1. Fixed an issue where BT restart is observed
2. Fixed issues where A2DP gliches are observed when connecting a
second phone
3. Ported multiple BT fixes for stability
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Add file wifi_mod_para_powersave.conf which include
powersave_enable flag. Add logic in wifi driver which
can parse this flag.
Add append_bootargs:
setenv append_bootargs moal.mod_para=wifi_mod_para_powersave.conf
saveenv
Change-Id: If0875510385219e47f9b74c4b64b11701849db6c
Signed-off-by: zhipeng.wang <zhipeng.wang_1@nxp.com>
Firmware:
PCIE-UART W8997 Firmware version 16.92.10.p126
WLAN Bug Fixes:
---------------
1. Fix uAP start issue on switching bands
2. Fixed WLAN Link loss during UDP Rx + BT Inquiry, and WLAN deauth
during BT HFP coex scenarios
BT Bug Fixes:
-------------
1. Added fix to handle processing of SSR command to unblock command
queuing which was causing BT restart
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Firmware:
PCIE-UART W8997 Firmware version 16.92.10.p118
WLAN Bug Fixes:
---------------
1. Fixed VHT compressed beamforming frame related pre-cert issues
2. Corresponding firmware change for fixing WPA3 SAE pre-cert requirement
3. Fixed issue with scan logic where firmware was aborting complete scan
even if noise is detected on a different channel
4. Updated scan gap logic to prevent the DUT from missing ECSA IE beacons
5. Test Mode fix: Fixed path B Tx power issue for continuous wave mode
BT Bug Fixes:
-------------
1. Added fixes for A2DP glitches in various scnearios
2. Added change of disabling ping as AES is disabled.
This was causing LMP response timeout issue
3. Added changes to correctly handle WAR flag name to enable fix for
negative test cases involving LE connection.
Coex Bug Fixes:
-------------
1. Added fix for A2DP Glitches during coex scenarious
2. Added fix for BLE HID links losses
3. Added WLAN throughput improvements during BT device discovery scenarious
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Firmware:
PCIE-UART W8997 Firmware version 16.92.10.p113
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Firmware:
PCIE-UART W8997 Firmware version 16.92.10.p110
SDIO-UART W8987 Firmware version 16.92.10.p208
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p207_16.92.10.p207
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-NXP-WIFI-FP92-BT-FP92-LINUX-ANDROID-MXM4X17186.p7-MGPL.git
Firmware version 16.92.10.p207
Firmware updates:
WLAN Bug Fixes:
===============
1. Fixed WLAN hang issue which was observed during HFP + STA scenario during TCP Tx
BT Bug Fixes:
=============
1. Corrected feature bit advertising to disable AES completely,
which was causing pairing / connection failure
2. For PHY, if asymmetric traffic is used, then corrected the
handling to post error code as per spec
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p206_16.92.10.p206
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-NXP-WIFI-FP92-BT-FP92-LINUX-ANDROID-MXM4X17186.p6-MGPL.git
Firmware version 16.92.10.p206
Firmware updates:
WLAN Bug Fixes:
===============
1. Fixed WLAN link loss which was observed in MMH scenario some time
after inquiry was started
2. Test Mode: Fixed cw mode power delta issue which was seen in configured
Vs measured Tx power value as part of this command
BT Bug Fixes:
=============
1. Fixed the issue of A2DP link loss that was observed due to
connection timeout (0x08)
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p204_16.92.10.p204
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-NXP-WIFI-FP92-BT-FP92-LINUX-ANDROID-MXM4X17186.p4-MGPL.git
Firmware updates:
New Additions:
==============
1. Update Tx continuous mode logic for test mode
WLAN Bug Fixes:
===============
1. Fixed WLAN deauth which was observed during wlan traffic in presence
of BT Inquiry, Inquiry scan or Paging on android console
2. Fixed issue of P2P Group Owner not sending QoS Null Frame to Station
3. Solved the issue while reconnecting to AP after channel switch in 5GHz
band for 40MHz/80MHz channel bandwidth
4. Addressed the issue for Roaming from AP1 to AP2 which was failing
using wpa_cli roam command in 5GHz band for 40MHz/80MHz channel bandwidth
BT Bug Fixes:
=============
1. Invalid / garbage data was observed in Test mode during BT RF testing
2. Made changes to set default PCM configuration settings in firmare
3. Disabled CS2 and Adv Ext features for MM release
4. BLE qualification related fixes
5. Fixed issue where controller was giving incorrect error code,
Corrected the error code per spec
6. Added fix of setting correct values for default parameter length when
DLE (Data Length Extension) is enabled with LR (Long Range) disabled
7. Added change to restrict Wesco to 4 for single slot EV packets
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p202_16.92.10.p202
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-nxp-wifi-fp92-bt-fp92-linux-android-mxm4x17186.p2-mgpl.git
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p99_16.85.10.p99
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-nxp-wifi-fp92-bt-fp85-linux-android-mxm4x17186-mgpl.git
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p80_16.85.10.p80
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-nxp-wifi-fp92-bt-fp85-linux-android-mxm4x17175-mgpl.git
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p73
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-nxp-wifi-fp92-bt-fp85-linux-android-mxm4x17169-gpl.git
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
