The 88w8987 firmware version:
SDIO_WLAN_UART_BT_8987_16.92.10.p208_16.92.10.p208
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-nxp-wifi-fp92-bt-fp92-linux-android-mxm5x16186.p8-mgpl.git
Firmware version 16.92.10.p208
WLAN Bug Fixes:
===============
1. WCSWREL-64: Allowed sending Scan Status Event, even in case of Scan
Abort, to fix scanning issue in noisy environment
2. Test Mode fix: Cosmetic change in variable name for improvement in
configuration of path id and modulation group for tx_power command
Note: Below RFU stuck issue related fixes from #3 to #6 are coming
from other CA2 project which are addressing these issues already
3. RFU stuck issue: Fixed assoc command timeout issue which was
seen in presence of pending probe response
4. RFU stuck issue: Fixed Radio Unit stuck during cold
reboot/scan stress test
5. RFU stuck issue: Fixed Firmware Hang after init due to
DPD training
6. RFU stuck issue: Fixed multi channel policy command
timeout during Firmware init due to DPD training in
stress test
BT Bug Fixes:
=============
None
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: yang.tian <yang.tian@nxp.com>
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p207_16.92.10.p207
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-NXP-WIFI-FP92-BT-FP92-LINUX-ANDROID-MXM4X17186.p7-MGPL.git
Firmware version 16.92.10.p207
Firmware updates:
WLAN Bug Fixes:
===============
1. Fixed WLAN hang issue which was observed during HFP + STA scenario during TCP Tx
BT Bug Fixes:
=============
1. Corrected feature bit advertising to disable AES completely,
which was causing pairing / connection failure
2. For PHY, if asymmetric traffic is used, then corrected the
handling to post error code as per spec
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p206_16.92.10.p206
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-NXP-WIFI-FP92-BT-FP92-LINUX-ANDROID-MXM4X17186.p6-MGPL.git
Firmware version 16.92.10.p206
Firmware updates:
WLAN Bug Fixes:
===============
1. Fixed WLAN link loss which was observed in MMH scenario some time
after inquiry was started
2. Test Mode: Fixed cw mode power delta issue which was seen in configured
Vs measured Tx power value as part of this command
BT Bug Fixes:
=============
1. Fixed the issue of A2DP link loss that was observed due to
connection timeout (0x08)
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p204_16.92.10.p204
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-NXP-WIFI-FP92-BT-FP92-LINUX-ANDROID-MXM4X17186.p4-MGPL.git
Firmware updates:
New Additions:
==============
1. Update Tx continuous mode logic for test mode
WLAN Bug Fixes:
===============
1. Fixed WLAN deauth which was observed during wlan traffic in presence
of BT Inquiry, Inquiry scan or Paging on android console
2. Fixed issue of P2P Group Owner not sending QoS Null Frame to Station
3. Solved the issue while reconnecting to AP after channel switch in 5GHz
band for 40MHz/80MHz channel bandwidth
4. Addressed the issue for Roaming from AP1 to AP2 which was failing
using wpa_cli roam command in 5GHz band for 40MHz/80MHz channel bandwidth
BT Bug Fixes:
=============
1. Invalid / garbage data was observed in Test mode during BT RF testing
2. Made changes to set default PCM configuration settings in firmare
3. Disabled CS2 and Adv Ext features for MM release
4. BLE qualification related fixes
5. Fixed issue where controller was giving incorrect error code,
Corrected the error code per spec
6. Added fix of setting correct values for default parameter length when
DLE (Data Length Extension) is enabled with LR (Long Range) disabled
7. Added change to restrict Wesco to 4 for single slot EV packets
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p202_16.92.10.p202
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-nxp-wifi-fp92-bt-fp92-linux-android-mxm4x17186.p2-mgpl.git
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p99_16.85.10.p99
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-nxp-wifi-fp92-bt-fp85-linux-android-mxm4x17186-mgpl.git
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p80_16.85.10.p80
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-nxp-wifi-fp92-bt-fp85-linux-android-mxm4x17175-mgpl.git
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
The 88w8987 firmware version: SDIO_WLAN_UART_BT_8987_16.92.10.p73
The firmware is merged from the repo:
ssh://git@bitbucket.sw.nxp.com/wcswrel/
rel-nxp-wifi-fp92-bt-fp85-linux-android-mxm4x17169-gpl.git
Yocto build, it requires to copy the files to:
- lib/firmware/nxp/sdiouart8987_combo_v0.bin
- lib/firmware/nxp/wifi_mod_para_sd8987.conf
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
