mirror of
https://github.com/NXP/imx-firmware.git
synced 2024-11-16 20:47:11 +00:00
14 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Sherry Sun
|
09b5e3d5b6 |
FwImage: update firmware to mxm5x17368.p2
Updated firmware: SDIO-UART W8987 Firmware version 16.92.21.p76.2 PCIE-UART W8997 Firmware version 16.92.21.p76.2 SDIO-UART W8997 Firmware version 16.92.21.p76.2 SDIO-UART IW416 Firmware version 16.92.21.p76.3 SDIO_UART IW612 Firmware version 18.99.1.p154.40 SDIO-UART W8801 Firmware version 14.92.36.p180 SDIO-UART W9098 Firmware version 17.92.1.p136.24 PCIE-UART W9098 Firmware version 17.92.1.p136.24 WLAN new Additions/Removals/Improvements: --------------- 1. SD8987: WSFD-443: Clock synch feature WLAN Bug Fixes: --------------- 1. SD8987/PCIE8997/IW416: WSW-24682: Ping is failing between testbed STA and STAUT after GTK rekey from AP 2. SD8987/PCIE8997/IW416: WSW-23252: Carrier sense test on Japanese regulation fail 3. SD8987: WSW-24668: STAUT is sending unprotected BTM/WNM action frames 4. SD8987: WSW-24629: Add support for antenna diversity control using gpio 5. SD8987: WSFD-658: Annex 106 - GPIO based FEM control via SOC register programming 6. SD8987: WSW-23926: UDP RX is lower than 5Mbps when playing music in shielding room 7. SD8987: WSW-22542: WiFi hang up with diff command timeout during run BT Inband/outband IR test w/ WiFi activities 8. SD8987/IW416: WSFD-653: Enable AES in FW by default 9. SD8987: WSW-23252 WSW-24023 Fix for probe resp and beacon leak 10. SD8987: WSFD-494: WiFi won't be connected back immediately when screen is off 11. PCIE8997: WSW-23539: Disconnection with reason 15 during WPA re-keying 12. PCIE8997: WSW-23252 WSW-24023: Fix for probe resp and beacon leak 13. IW416: WSW-23771: WLAN deauthentication observed if A2DP suspended and started again 14. IW416: WSW-23957: MMHAP Unable make connection with NXP Reference Devices 15. IW612: WSW-23908: Observing device hang issue when doing channel switch for MMH with open security 16. IW612: WSW-24518: 100% chload sometimes if EDMAC is enabled and any STA is connected 17. IW612: WCSWREL-413: P2P cannot work with the latest firmware 18. PCIE9098/SD9098: WCSWREL-414: P2P cannot work and observe command timeout 19. PCIE9098: Wakeup card timeout after suspend/resume 20. PCIE9098/SD9098: WSFD-599: Support trigger frame generating in RF test mode BT/Co-ex Bug Fixes: ------------------- 1. SD8987: WSW-22599: Audio glitch could be heard when ACL is Master role(BT only scenario) in Congestion environment 2. IW416: WSW-23661: LE power capping to 10 dBm needs to be revoked for silicon supporting BT 5.0 and higher versions 3. IW416: WSW-24502: Audio is not heard in TX direction during incoming/outgoing NBS call with Ref device 4. IW416: WSW-21498: Heavy A2DP Audio Distortion (Glitch in every ~1sec) observed when DUT is at 5 meter distance from reference device 5. IW416: WSW-22879: 2nd BT(S) link failed to establish in the presence of SCO/eSCO connection on the first(M) link 6. IW416: WSW-19213: After starting BT/BLE Tx, Tx response is observed momentarily on litepoint 7. IW416: WSW-24321: "Unknown HCI Command " returned as status for cmd "3f fc 00" to enable Independent Reset via in-Band 8. IW416: WSW-25052: FW not getting up after enabling Independent Reset via in-Band 9. IW416: WSW-24024: Wlan De-authentication Observed while STA/MMH+LE Scan Coex Scenario 10. IW416: WSW-24825: DUT not responding to the pair/connect request sent by the reference device 11. PCIE8997: WSW-24482: Random mute pattern observed during A2DP_SRC streaming with Ref1 when OPP_TX started with Ref2 12. PCIE8997: WSW-18190: Issue observed in BT Paging /LE Connection + MMH/STA[BGN20] with Wifi RX traffic 13. IW612: WSW-23062: Speaker Disconnection while switching A2DP streaming between two speakers 14. IW612: WSW-23992: Frequent Page timeout (0x04) observed in DUT for Create_Connection command in scatternet scenarios 15. IW612: WSW-24302: Severe A2DP glitches are observed while connecting disconnecting A2DP-SNK devices Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
982bb10dfa |
FwImage: update firmware to mxm5x17366.p3
Updated firmware: SDIO-UART W8987 Firmware version 16.92.21.p69.3 SDIO-UART W9098 Firmware version 17.92.1.p136.13 PCIE-UART W9098 Firmware version 17.92.1.p136.13 Unchanged firmware: SDIO-UART W8801 Firmware version 14.92.36.p178 PCIE-UART W8997 Firmware version 16.92.21.p55.3 SDIO-UART W8997 Firmware version 16.92.21.p55.3 SDIO-UART IW416 Firmware version 16.92.21.p55.3 WLAN Bug Fixes: --------------- 1. PCIE9098/SD9098: WSW-22305: wifi cmd timeout showed when test switch connect with different APs 2. PCIE9098/SD9098: WSW-20645: DUT fails to reassociate when Ex-AP changes its channel to 149/HE80 3. PCIE9098/SD9098: WSW-20819: detect a spike on spectrum during CAC 4. PCIE9098/SD9098: WSW-22448: High Channel Load seen in getchload command in APUT when it is receiving full bandwidth UDP Rx traffic 5. PCIE9098/SD9098: WSW-20549: Scan CMD Timeout 0x107 observed on 9098 STA when attempting to associate with 9098 uAP 6. PCIE9098/SD9098: WSW-22460: DUT send RTS packet during RTS threshold boundary test 7. PCIE9098/SD9098: WSW-20734: In-STA associates in VHT20 instead of VHT40 using mlan0 interface to Ex-AP configured in HE80/VHT80 mode 8. PCIE9098/SD9098: WSW-21097: 0x5e Command timeout observed, while running connect disconnect with multiclient (8 clients) after 1 hour 9. PCIE9098/SD9098: WSW-22158: False Radar flood observed on Aux Path 10. PCIE9098/SD9098: WSW-20625: External station can't connect with 5G uAP interface after long time standby 11. PCIE9098/SD9098: WSW-22012: Disable JTAG in SW to meet various security requirements. 12. PCIE9098/SD9098: WSW-20445: extAP-wpa23 and mmlan-wpa12 ping aging dis-connect 13. PCIE9098/SD9098: WSW-21983: STA in 2.4GHz not connecting to Ex-AP from Android HMI 14. PCIE9098/SD9098: WSW-22216: 0x107 command timeout when kept staying on Wi-Fi setting GUI with STA connected 15. SD8987: WSW-21659: cmd timeout happen after DUT switches to New DFS channel 16. SD8987: WSW-19978: DUT hang observed while streaming A2DP music after launching "truncated_sco_link_request" exploiter using Braktooth 17. SD8987: WSW-21879: Fixed the issue of false radar detection 18. SD8987: WSW-20347: Frequent false radar detect in CH52 VH40 when Ext AP in CH60 nearby 19. SD8987: WSW-22596: FP92+ release 2G/5G WAPI connected failed BT/Co-ex Bug Fixes: ------------------- 1. PCIE9098/SD9098: WSW-23264: Command timeout happens for vendor command HCI_CMD_MRVL_HOST_PCM_CONFIG(0x6F) 2. PCIE9098/SD9098: WSW-21142: Random command timeout when performing connection & disconnection with remote phone in a loop 3. PCIE9098/SD9098: WSW-18717: Severe A2DP glitches observed for Play-Pause on REF2 during active HFP on REF1 4. PCIE9098/SD9098: WSW-22782: LE link drop with reason "Instant Passed" during LE Disconnection (DUT role Slave) 5. PCIE9098/SD9098: WSW-22312: Audio is not heard in both Tx/Rx direction during incoming/outgoing WBS call with Ref device 6. PCIE9098/SD9098: WSW-16791: Non-supported LE Features are still observed as supported as part of MM release 7. PCIE9098/SD9098: WSW-22296: DUT unable to do LE Scan on nRF APP for GATT Outgoing connection 8. PCIE9098/SD9098: WSW-22419: In dual HFP connection Timeout issue is observed with the eSCO links 9. PCIE9098/SD9098: WSW-20203: Inquiry Scan failed 2 out of 5 times while STA/MMH iPerf traffic 10. PCIE9098/SD9098: WSW-20437: Severe A2DP glitches observed after disconnecting the SCO Bridge call 11. PCIE9098/SD9098: WSW-18024: Auto enable PCM configurations for Android 12. PCIE9098/SD9098: WSW-18065: FW hang observed during DUAL HF scenario verification 13. SD8987: WSW-23190: "Memory Capacity Exceeded" can be found if add the 5th device to the BLE Resolving List 14. SD8987: WSW-22380: BT crash observed, unable to recover while creating 4/5 LE connection 15. SD8987: WSW-22100: DUT as configurator, Initiator fail to AUTH CCT1(configurator) with PKEX way 16. SD8987: WSW-21481: Second device failed to be paired/connected during first device doing HFP outgoing call 17. SD8987: WSW-20418: DUT hang observed while streaming A2DP music after launching "feature_req_ping_pong" exploiter using Braktooth Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
aeba88decc |
FwImage: update firmware to mxm5x17362
Updated firmware: SDIO-UART W8987 Firmware version 16.92.21.p69 SDIO-UART W9098 Firmware version 17.92.1.p136.3 PCIE-UART W9098 Firmware version 17.92.1.p136.3 SDIO-UART W8801 Firmware version 14.92.36.p178 Unchanged firmware: PCIE-UART W8997 Firmware version 16.92.21.p55.3 SDIO-UART W8997 Firmware version 16.92.21.p55.3 SDIO-UART IW416 Firmware version 16.92.21.p55.3 WLAN new Additions/Removals/Improvements: --------------- 1. PCIE9098/SD9098: DL-MUMIMO (STA Only) 2. PCIE9098/SD9098: UL-MUMIMO (STA Only) 3. PCIE9098/SD9098: Extended Range 4. PCIE9098/SD9098: 802.11k 5. PCIE9098/SD9098: 802.11v 6. PCIE9098/SD9098: 802.11z (Host based TDLS) 7. PCIE9098/SD9098: P2P for Miracast 8. PCIE9098/SD9098/SD8987: Wi-Fi Enhanced Open (OWE) 9. PCIE9098/SD9098: Clocksync 10. PCIE9098/SD9098/SD8987: Wireless Apple Car Play (R5) 11. PCIE9098/SD9098: Wireless Android Auto 12. PCIE9098/SD9098: Non-Triggered Target Wake Time 13. PCIE9098/SD9098: 802.11r (STA Roaming Support) 14. PCIE9098/SD9098: DCM 15. PCIE9098/SD9098: 802.11mc / Location 16. PCIE9098/SD9098: Easy Mesh 17. PCIE9098/SD9098: DRCS 18. PCIE9098/SD9098/SD8987: Wi-Fi Easy Connect (DPP) 19. PCIE9098/SD9098: DFS (Radar Detection) Master 20. PCIE9098/SD9098: uAPSD / PPS 21. PCIE9098/SD9098: Zero Wait DFS 22. PCIE9098/SD9098/SD8987: WAPI 23. PCIE9098/SD9098: Wi-Fi Agile Multi-Band 24. PCIE9098/SD9098: Packet Coalescing 25. PCIE9098/SD9098: WPA3 embedded 26. PCIE9098/SD9098: Embedded Authenticator 27. PCIE9098/SD9098: Embedded Supplicant 28. SD8987: mDNS offload 29. SD8987: ARP Offload 30. SD8987: mDNS (Bonjour) wake up - Wi-Fi 31. SD8987: IPv6 NS Offload WLAN Bug Fixes: --------------- 1. SD8987: WSW-19887: First SAE commit exchange is not successful when TB STA sends SAE commit msg including APUT's anticlogging token 2. SD8987: WSW-21709: New txpower config not used when receiving new regulatory setting from AP 3. SD8987: WSW-19821: Connection fail about OWE-5.2.4 with wpa_v2.10-M001 4. SD8987: WSW-21085: STAUT is not setting Link Measurement bit in RRM Capabilities in Assoc Request 5. SD8987: WSW-21153: Release fw load fail when load with fw_serial=1 for the second time 6. SD8987: WSW-22107: DUT as Configurator AP configures enrollee as STA Fail 7. SD8801: WCSWREL-302: Enable WLAN time BT time to control GRANT 8. SD8801: WSW-18346: Enable External Coex Feature 9. SD8801: WSW-13649: DUT is not initiating association after succesful SAE authentication 10. SD8801: WSW-11577: STAUT not transmiting SAE confirm message when AP immediately transmits SAE confirm message after sendings it 11. SD8801: WSW-16956: WFA SVD failure fix MM 12. SD8801: WSW-16935: WPA3 R3 Support for MM 13. SD8801: WSW-13637: Rx-AMSDU & Rx-Frag related vulnerability applicability analysis & fixes 14. SD8801: WSW-14117: STA cannot connect with WPA2 AP at the first attempt BT/COEX New Additions/Removals/Improvements: ------------------- 1. PCIE9098/SD9098/SD8987: Wake on BT/BLE (Chip to Host wake up) 2. PCIE9098/SD9098: Dual A2DP (2 Source) 3. PCIE9098/SD9098: Dual A2DP (1 Source + 1 Sink) 4. PCIE9098/SD9098: Dual HFP (1 WBS/1NBS) PCM 5. PCIE9098/SD9098/SD8987: Dual HFP (2 NBS) PCM 6. PCIE9098/SD9098: Support for alternate Codecs (AAC, LDAC) 7. PCIE9098/SD9098: External Coex 8. PCIE9098/SD9098: BCA Time Sharing Coex 9. PCIE9098/SD9098/SD8987: BLE Multi-Adv 10. SD8987: A2DP (SRC + SNK) BT/Co-ex Bug Fixes: ------------------- 1. PCIE9098/SD9098: WSW-17756: Authentication Failure (0x05) is observed for BT connection during LE incoming connection + Bonding 2. PCIE9098/SD9098: WSW-18312: In Obexctl connect command is not working after giving the command for the second time 3. SD8987: WSW-19344: Audio Loss observed for 5-10s in between HFP call after launching "feature_response_flooding" exploiter using Braktooth 4. SD8987: WSW-19674: RX TP is lower than 1Mbps or could hear glitch when testing dual A2DP in open air and shielding room 5. SD8987: WSW-17584: New BLE TCs and failures with TCRL2021-1 and TCRL2021-2 6. SD8987: WSW-17585: New BREDR TCs and failures with TCRL2021-1 and TCRL2021-2 7. SD8987: WSW-19300: DUT hang observed after Severe A2DP Glitches and audio loss while streaming after launching "au_rand_flooding" exploiter using Braktooth 8. SD8987: WSW-19315: Severe A2DP Glitches observed while streaming after launching "invalid_timing_accuracy" exploiter using Braktooth 9. SD8987: WSW-19977: DUT hang observed while streaming A2DP music after launching "invalid_max_slot" exploiter using Braktooth 10. SD8987: WSW-20230: "Command disallowed" issue happens for Batch_scan_data_read command after set batch_scan_mode as 0 in Set_scan_parameter 11. SD8987: WSW-20287: UUT failed to reset after hciattach to 115200 because of unknown HCI command returned when Bluez host send get MWS transport layer configuration command 12. SD8987: WSW-21456: DUT is creating eSCO link even if host rejected second incoming eSCO link request during Dual HFP test 13. SD8987: WSW-20273: WBS sample rate was not set in daemon.conf Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
d5c8bd7297 |
FwImage: update firmware to mxm5x17322.p3
Updated firmware: SDIO-UART W9098 Firmware version 17.92.1.p116.1 SDIO-UART W8987 Firmware version 16.92.21.p41.3 SDIO-UART IW416 Firmware version 16.92.21.p41.1 PCIE-UART W9098 Firmware version 17.92.1.p116.1 Unchanged firmware: SDIO-UART W8801 Firmware version 14.92.36.p174 SDIO-UART W8997 Firmware version 16.92.21.p41 PCIE-UART W8997 Firmware version 16.92.21.p26.1 WLAN Bug Fixes: --------------- 1. SD8987: WSW-19750: Fix Low radar detection rate in 20MHz [JP56] 2. SD8987: WSW-19629: Fix Radar dectection rate very low in CH52 for VHT40 [ETSI] 3. SD8987: WSW-19729: Fix Low radar detection rate on some channels in 40MHz [FCC] 4. SD8987: WSW-11606: Fix KCC type 2 low radar detection probability 5. SD8987: WSW-19457: Beacon has duplicate IEs in P2P GO mode 6. PCIE9098: WCSWREL-315: Fixed WOWLAN functionality issue 7. PCIE9098: WSW-19638: Added RF_TEST_MODE support 8. SD9098: WCSWREL-314: Fixed Load_Unload failure for the first iteration 9. SD9098: WSW-19638: Added RF_TEST_MODE support BT/Co-ex Bug Fixes: ------------------- 1. SD8987: WSW-19322: Revert changes done in p41.2 to fix CA2 TCRL2021-2 BQB LMP and BB fail cases 2. SD8987: WSW-20271: Revert changes done in p41.2 to Temporarily disable WARs fixing CSB and sync 3. SD8987: WSW-19977: Hang observed while streaming A2DP music after launching invalid_max_slot exploiter 4. SD8987: WSW-19300: Hang observed after severe A2DP Glitches and audio loss after launching au_rand_flooding exploiter 5. SD8987: WSW-19322: Fix CA2 TCRL2021-2 BQB LMP and BB fail cases 6. SD8987: WSW-20271: Disable WARs fixing CSB and sync train related BQB failures 7. SD8987: WSW-18630: Fixed wifi traffic stuck when running RX and HFP calling 8. SD8987: WSW-17585: New BREDR TCs and failures with TCRL2021-1 and TCRL2021-2 9. SD8987: WSW-19744: DUT is not able to receive any BT RX packets 10. SD8987: WSW-19657: "Invalid HCI Command Parameters" found after enablng the customer-specific batch scan 11. PCIE9098: WSW-17747: Fixed not getting any packet received counts, RSSI, PER information 12. PCIE9098: WSW-17745: Fixed not capturing any packets on IQXeL and Measure tx-power value 13. PCIE9098: WSW-19137: Fixed hang after launching duplicated_encapsulated_payload exploiter 14. PCIE9098: WSW-16828: Fixed AES failing issue even after enabling AES using VSC 15. PCIE9098: WSW-19142: Fixed Pair/Connect issue when exploiter paging_scan_disable is launched 16. PCIE9098: WSW-19145: Fixed HFP Glitches and Connection-timeout after launching invalid_feature_page_execution 17. PCIE9098: WSW-20002: Fixed RX data lost issue for BT RX Throughput transfer 18. PCIE9098: WSW-19523: Fixed deauth on MAC2 resulting in a hang during Coex scenario 19. SD9098: WSW-17747: Fixed not getting any packet received counts, RSSI, PER information 20. SD9098: WSW-17745: Fixed not capturing any packets on IQXeL and Measure tx-power value 21. SD9098: WSW-19137: Fixed hang after launching duplicated_encapsulated_payload exploiter 22. SD9098: WSW-16828: Fixed AES failing issue even after enabling AES using VSC 23. SD9098: WSW-19142: Fixed Pair/Connect issue when exploiter paging_scan_disable is launched 24. SD9098: WSW-19145: Fixed HFP Glitches and Connection-timeout after launching invalid_feature_page_execution 25. SD9098: WSW-20002: Fixed RX data lost issue for BT RX Throughput transfer 26. SD9098: WSW-19523: Fixed deauth on MAC2 resulting in a hang during Coex scenario 27. IW416: WSW-19098: New BREDR TCs and failures with TCRL2021-2, E17535 28. IW416: WSW-19212: Not able to get any packet received counts, RSSI, PER information for BT RX 29. IW416: WSW-19476: Not able to Pair/Connect the REF device when exploiter "paging_scan_disable" is launched 30. IW416: WSW-19474: DUT hang observed after launching "feature_req_ping_pong" exploiter Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
03975c5dc8 |
FwImage: update firmware to mxm5x17322
Updated firmware: SDIO-UART W9098 Firmware version 17.68.1.p116 SDIO-UART W8987 Firmware version 16.92.21.p41 SDIO-UART W8801 Firmware version 14.92.36.p174 SDIO-UART IW416 Firmware version 16.92.21.p41 PCIE-UART W9098 Firmware version 17.68.1.p116 SDIO-UART W8997 Firmware version 16.92.21.p41 Unchanged firmware: PCIE-UART W8997 Firmware version 16.92.21.p26.1 WLAN Bug Fixes: --------------- 1. SD9098: WSW-17876: RF Test Mode: After Disabling cont_mode(CMD18_CW=1), Firmware is getting crashed if radio mode is changed 2. SD9098: WSW-9362: EU-CERT: COT and Channel Access Mechanism tests failing with OptionA Procedure 3. SD8987: WSW-18878: WPA2-PSK Roaming failed 4. SD8987: WSW-18865: VHT80 TCP-tx throughput only run about 170Mbps, both STA and MMH mode 5. SD8987: WSW-16412: Enable 2.4GHz 40MHz bandwidth support for V16 devices 6. SD8987: WSW-18454: Added 802.11k suppor 7. SD8987: WSW-18455: Added 802.11v support 8. SD8987: WSW-18456: Added 802.11r (STA Roaming) support 9. SD8987: WSW-18457: Added 802.11z (Host based TDLS) support 10. SD8987: WSW-18459: DFS (Radar Detection) Master support (some known issues in specific config are found, and under debugging) 11. SD8987: WSW-18461: Per-path regulatory power table (Tested only with RD Board) 12. SD8987: WSW-18462: Per-path DPD Calibration Front-end Loss (Tested only with RD Board) 13. SD8987: WSW-18463: Antenna diversity (Tested only with RD Board) 14. SD8801: WSW-16811: Fix scan cmd timeout issue 15. IW416: WSW-19214: get link layer statistic fail, CMD_RESP: cmd 0x256 error 16. IW416: WSW-16412: Enable 2.4GHz 40MHz bandwidth support for V16 deviceS 17. IW416: WSW-17096: Wi-Fi BGN(2.4Ghz) Association failure issue 18. IW416: WSW-17705: IW416 Wlan Spurious emission issue 19. IW416: WSW-17552: Channel Occupancy Time (COT) failure in STA mode. Max. COT for HT20/MCS0 in 5G mode should be < 6 ms, but observed value is 6.081 ms 20. PCIE9098: WSW-12608: Optimize moal driver loading via firmware init time optimization 21. PCIE9098: WSW-9362: EU-CERT: COT and Channel Access Mechanism tests failing with OptionA Procedure 22. SD8997: WSW-16427: Wi-Fi throughput drops to 0 during scan 23. SD8997: WSW-16819: Wi-Fi occurs 0xa4 command timeout with reason code 12 while playing online video about 16 hours 24. SD8997: WSW-17573: Android UI can't display Wi-Fi standard correctly BT/Co-ex Bug Fixes: ------------------- 1. SD9098: WSW-17745: RF Test Mode: Not able to capture packets on IQXeL and Measure tx-power value is approx. -42dBm for configured power 4dBm for BLE 2. SD9098: WSW-17747: Not able to get any packet received counts, RSSI, PER information for BT RX 3. SD9098: WSW-18470: Deauthentication on MAC2 and further causing hang issue without ps_mode and auto_ds load parameters 4. SD8987: WSW-18517: 7-8 Glitches are observed during the A2DP SRC streaming + BT Inquiry 5. SD8987: WSW-18598: BT On/Off cycle fails with InBand IR 6. SD8987: Independent Reset via In-band for BT and Wi-Fi(NOTE: This feature needs separate BT Only and WLAN Only firmware binaries, which are provided in this release) 7. IW416: WSW-9978: BLE Qualification protocol failures 8. IW416: WSW-13613: eSCO connection is accepted with retransmission window 0x06 9. IW416: WSW-10265: More than expected channels getting blocked in case of STA + BT Internal AFH 10. PCIE9098: WSW-17745: RF Test Mode: Not able to capture packets on IQXeL and Measure tx-power value is approx. -42dBm for configured power 4dBm for BLE 11. PCIE9098: WSW-17747: Not able to get any packet received counts, RSSI, PER information for BT RX 12. SD8997: WSW-16022: Low 2.4GHz Wi-Fi throughput in Wi-Fi/A2DP Coex case when AP RSSI is weak 13. SD8997: WSW-16243: Hardware Error(0x23) occured during A2DP streaming 14. SD8997: WSW-17570: There is 8s+ delay in waking up OTT host from RCU after host enters into sleep 15. SD8997: WSW-16820: BLE_HID fails to Pair while performing HFP Skype call[Page Timeout: 20sec] 16. SD8997: WSW-18095: Low TP observed in STA(VHT80) WiFi RX Traffic in Coex scenario with INQUIRY/LE_SCAN/A2DP SRC 17. SD8997: WSW-17479: Google Voice Assistant can't be used 18. SD8997: WSW-19097: A2DP glitch in long distance test Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
a312213179 |
FwImage: update firmware to mxm5x17283.p2
Firmware: SDIO-UART W8801 Firmware version 14.92.36.p171 SDIO-UART IW416 Firmware version 16.92.21.p11.2 PCIE-UART W9098 Firmware version 17.92.5.p11 SDIO-UART W8997 Firmware version 16.92.10.p219.5 PCIE-UART W8997 Firmware version 16.92.10.p213.4 SDIO-UART W8987 Firmware version 16.92.21.p11.1 WLAN Bug Fixes: --------------- 1. PCIE8997: Fixed issue with 5G start when sae_pwe=1 is set 2. PCIE8997: Added WPA3 R3 Support 3. PCIE9098: Fixed issue with 5G start when sae_pwe=1 is set 4. PCIE9098: Added WPA3 R3 Support 5. SD8801: Fixed issue with 5G start when sae_pwe=1 is set 6. SD8801: Added WPA3 R3 Support 7. SD8987: Fixed issue with 5G start when sae_pwe=1 is set 8. SD8987: Addressed Ideal period probability cert test failure in MMH 5GHz HT20 mode 9. SD8987: Added FW and VHAL implementation for WoWLAN 10. SD8987: Added WPA3 R3 Support 11. SD8997: Fixed issue with 5G start when sae_pwe=1 is set 12. SD8997: Added WPA3 R3 Support 13. SDIW416: Fixed issue with 5G start when sae_pwe=1 is set 14. SDIW416: Addressed Ideal period probability cert test failure in MMH 5GHz HT20 mode 15. SDIW416: Added WPA3 R3 Support BT Bug Fixes: ------------- 1. PCIE8997: Added an update to the 'Impersonation in the Passkey Entry Protocol' Vulnerability (original CVE-2020-26558) 2. PCIE8997: Added BT ANSSI VU fix 3. PCIE9098: Added an update to the 'Impersonation in the Passkey Entry Protocol' Vulnerability (original CVE-2020-26558) 4. PCIE9098: Added BT ANSSI VU fix 5. SD8987: Added an update to the 'Impersonation in the Passkey Entry Protocol' Vulnerability (original CVE-2020-26558) 6. SD8987: Fixed issue of Set Random Private Address Timeout Command accepting values more than 1 Hr 7. SD8987: Added BT ANSSI VU fix 8. SD8997: Added an update to the 'Impersonation in the Passkey Entry Protocol' Vulnerability (original CVE-2020-26558) 9. SD8997: Added BT ANSSI VU fix 10. SDIW416: Added an update to the 'Impersonation in the Passkey Entry Protocol' Vulnerability (original CVE-2020-26558) 11. SDIW416: Fixed issue of Set Random Private Address Timeout Command accepting values more than 1 Hr 12. SDIW416: Added BT ANSSI VU fix 13. SDIW416: More than expected channels getting blocked in case of STA + BT internal AFH Yocto build, it requires to copy the files to: - lib/firmware/nxp/ Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
f179573c8c |
FwImage: update firmware to mxm5x17283
Firmware: SDIO-UART W8801 Firmware version 14.92.36.p170 SDIO-UART IW416 Firmware version 16.92.21.p11 PCIE-UART W9098 Firmware version 17.92.5.p10 SDIO-UART W8997 Firmware version 16.92.10.p219.4 PCIE-UART W8997 Firmware version 16.92.10.p213.3 SDIO-UART W8987 Firmware version 16.92.21.p11 WLAN Bug Fixes: --------------- 1. PCIE8997: Fixed pre-cert issue where STA is responding to the ARP requests after receiving encrypted M3 and reset PN from AP 2. PCIE8997: Added WFA SVD failure fixes 3. PCIE9098: Fixed pre-cert issue where STA is responding to the ARP requests after receiving encrypted M3 and reset PN from AP 4. PCIE9098: Added WFA SVD failure fixes 5. SD8801: Fixed low TCP RX throughput issue For Linksys 1900AC AP 6. SD8801: Corresponding firmware change for fixing low throughput issue in WPA3-SAE security 7. SD8801: Enabled ED-MAC by default 8. SD8801: Fixed low throughput in Rx A-MSDU 9. SD8801: Fixed low throughput issue in P2P GC 10. SD8801: Added WFA SVD failure fixes 11. SD8987: Added WFA SVD failure fixes 12. SD8987: Minor generic bug fixe 13. SD8987: Fixed RF test mode "Continuous Transmit Test" error happened on the second time test 14. SD8987: Fixed Low TCP-Tx and UDP-Tx throughput issues 15. SD8997: Fixed pre-cert issue where STA is responding to the ARP requests after receiving encrypted M3 and reset PN from AP 16. SD8997: Added WFA SVD failure fixes 17. SDIW416: Added WFA SVD failure fixes 18. SDIW416: Minor generic bug fixes BT Bug Fixes: ------------- 1. SD8987: Minor generic bug fixe 2. SD8987: Fixed FW replying with different reason when the Host has rejected the incoming call 3. SD8987: Fixed Outgoing connection disconnection with reason "Connection terminated by local host" after pairing with reference device 4. SDIW416: Fixed an issue with retransmission window during eSCO connection accept 5. SDIW416: Continuous A2DP-SNK audio glitches issue observed in MMH Rx traffic Yocto build, it requires to copy the files to: - lib/firmware/nxp/ Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
df6ba6bd59 |
FwImage: update firmware to mxm5x17266.p3
Firmware: SDIO-UART IW416 Firmware version 16.92.10.p233.2 PCIE-UART W9098 Firmware version 17.92.5.p9 SDIO-UART W8997 Firmware version 16.92.10.p219.2 PCIE-UART W8997 Firmware version 16.92.10.p213.2 SDIO-UART W8987 Firmware version 16.92.10.p210.1 WLAN Bug Fixes: --------------- 1. IW416: Fixed the issue of Channel Occupancy Time (COT) coming as 7.85 msec where as it should be under 6 msec 2. SDIO8997: Fixed issue of ping through gateway for some minutes when running long time test 3. SDIO8997: Added 2.4GHz 40MHz bandwidth support for V16 devices 4. PCIE8997: Fixed issue of ping through gateway for some minutes when running long time test 5. PCIE8997: Added 2.4GHz 40MHz bandwidth support for V16 devices BT Bug Fixes: ------------- 1. IW416: Fixed the issue of DUT blocking more than 50/55 channels in shielded environment without any external noise 2. IW416: Fixed the issue of Continuous A2DP-SNK audio glitches in Rx traffic 3. PCIE9098: Fixed the scan on fail as Command Disallowed is observed for LE Set Extended Scan Parameters 4. SDIO8997: Hardware Error(0x23) occured during A2DP streaming 5. PCIE8997: Hardware Error(0x23) occured during A2DP streaming Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
20290c2aa5 |
FwImage: update firmware to mxm5x17266.p2
Firmware: SDIO-UART IW416 Firmware version 16.92.10.p233.1 PCIE-UART W9098 Firmware version 17.92.5.p8 SDIO-UART W8997 Firmware version 16.92.10.p219.1 PCIE-UART W8997 Firmware version 16.92.10.p213.1 SDIO-UART W8987 Firmware version 16.92.10.p210.1 WLAN Bug Fixes: --------------- 1. IW416: [WCSWREL-100] L5.4.70: 2.4G AP connect fail after run 5G STA mode 2. IW416: Fixed BSS start/stop stress test failed with 0x10d cmd timeout 3. PCIE9098: Continuous association with 5 different APs stress fails 4. PCIE9098: DUT is unable to receive packets in MFG mode 5. PCIE9098: Command timeout 0x107 observed while running Tx UDP traffic to two stations with scan triggered for every 30s in background 6. SDIO8997: [WCSWREL-100] L5.4.70: 2.4G AP connect fail after run 5G STA mode 7. PCIE8997: [WCSWREL-100] L5.4.70: 2.4G AP connect fail after run 5G STA mode 8. SDIO8987: [WCSWREL-100] L5.4.70: 2.4G AP connect fail after run 5G STA mode BT Bug Fixes: ------------- 1. IW416: Command tx timeout as soon as advertise on/off is done in a loop 2. IW416: Fixed the error "connection rejected due to security reasons" during lescan and file transfer 3. IW416: Fixed the Type1XK_Adaptivity failure 4. IW416: Fixed the LE link disconnection with "Connection Timeout" 5. IW416: Fixed the “Authentication Failure” issue found during BT E0/AES connection process 6. IW416: [WCSWREL-136]cannot hear voice from BT HFP call with IW416 on both imx8mq and imx8mp 7. IW416: Disable AES feature support due to known issue 8. PCIE9098: Disabled LE Extended ADV, periodic ADV & Channel Selection Algorithm 9. PCIE9098: Disable AES feature support due to known issue 10. SDIO8997: Fixed the low 2.4GHz Wi-Fi throughput in Wi-Fi/A2DP Coex case when AP RSSI is weak 11. SDIO8997: Fixed the Low TP ~400Kbps issue during STA_2.4GHz_A2DP_SRC/SNK_UDP_RX 12. SDIO8997: Disable AES feature support due to known issue 13. PCIE8997: Disable AES feature support due to known issue 14. SDIO8987: Fixed the Issue of Controller not sending "LE create connection" command into air 15. SDIO8987: [WCSWREL-147] Bluetooth will crash and restart fail in stress test 16. SDIO8987: Disable AES feature support due to known issue Yocto build, it requires to copy the files to: - lib/firmware/nxp/ Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
648018f14a |
FwImage: update firmware to mxm5x17266
Firmware: SDIO-UART IW416 Firmware version 16.92.10.p177 PCIE-UART W9098 Firmware version 17.92.5.p6 SDIO-UART W8997 Firmware version 16.92.10.p219 PCIE-UART W8997 Firmware version 16.92.10.p213 SDIO-UART W8987 Firmware version 16.92.10.p210 WLAN Bug Fixes: --------------- 1. PCIE9098: TCP Uplink Traffic Test on P2P-GO and BSS Start Stop stress fails within 1hour 2. PCIE9098: Suspend-Resume fails in connected state 3. PCIE9098: ED-Mac is not enabled by default 4. PCIE9098: EU-Cert is getting failed for 2.4G in mlan0 interface in STA mode BT Bug Fixes: ------------- 1. SDIO8997: Low TP ~30Kbps is observed during [STA_2.4GHZ_A2DP_SRC/SNK_TCP_TX] Yocto build, it requires to copy the files to: - lib/firmware/nxp/ Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
f69b5a1d5c |
FwImage: update firmware to mxm5x17247.p5
Firmware: PCIE-UART W9098 Firmware version 17.92.5.p3 SDIO-UART W8997 Firmware version 16.92.10.p218 PCIE-UART W8997 Firmware version 16.92.10.p213 SDIO-UART W8987 Firmware version 16.92.10.p210 WLAN Bug Fixes: --------------- 1. PCIE9098: Fixed pre-cert issues 2. PCIE9098: Added a workaround for suspend-resume issue 3. SDIO8997: Fixed low throughput issues during Coex mode 4. SDIO8997: Fixed audio glitches issue during Coex mode BT Bug Fixes: ------------- 1. PCIE9098: Fixed device hang issue during suite validation 2. PCIE9098: Added BT VU fixes 3. PCIE8997: Fixed device hang issue during suite validation 4. PCIE8997: Added BT VU fixes 5. SDIO8987: Added BT VU fixes Yocto build, it requires to copy the files to: - lib/firmware/nxp/ Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
c314d501bd |
FwImage: update firmware to mxm5x17247.p1
Firmware: PCIE-UART W9098 Firmware version 17.92.5.p1 SDIO-UART W8997 Firmware version 16.92.10.p216 PCIE-UART W8997 Firmware version 16.92.10.p212 SDIO-UART W8987 Firmware version 16.92.10.p209 WLAN Bug Fixes: --------------- 1. PCIE9098: Fixed issues seen during stress test with data traffic. BT Bug Fixes: ------------- None. Yocto build, it requires to copy the files to: - lib/firmware/nxp/ Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
aa62e6e688 |
FwImage: update firmware to mxm5x17247
Firmware: PCIE-UART W9098 Firmware version 17.92.1.p55 SDIO-UART W8997 Firmware version 16.92.10.p156 PCIE-UART W8997 Firmware version 16.92.10.p212 SDIO-UART W8987 Firmware version 16.92.10.p209 WLAN Bug Fixes: --------------- 1. Added Wi-Fi VU fixes for four firmwares 2. PCIE9098: Fixed 11AX pre-cert/EU-cert test issues 3. PCIE9098: Fixed DFS channel switch compliance related issue 4. PCIE9098: Fixed WPA3 band switch issue 5. PCIE9098: Fixed issues related to scan stress 6. PCIE9098: Fixed issues seen during traffic stress test 7. SDIO8997: Fixed issues seen during traffic stress test BT Bug Fixes: ------------- 1. PCIE9098: Fixed various issues related to device hang 2. PCIE9098: Fixed issues with BT mode switch Yocto build, it requires to copy the files to: - lib/firmware/nxp/ Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |
||
|
Sherry Sun
|
e69c1988f8 |
FwImage: update firmware to mxm5x17241
Firmware: PCIE-UART W8997 Firmware version 16.92.10.p211 PCIE-UART W9098 Firmware version 17.92.1.p46 SDIO-UART W8997 Firmware version 16.92.10.p150 WLAN Bug Fixes: --------------- 1. Fixed an issue where wakeup card timeout is seen when STAUT connects to Ext-AP 2. Added multiple fixes for 11ax pre-cert issues 3. Added RF Test Mode support 4. Added fixes for scan command timeout seen during stress tests 5. Added fixes for 11ac pre-cert failures BT Bug Fixes: ------------- 1. Fixed an issue where BT restart is observed 2. Fixed issues where A2DP gliches are observed when connecting a second phone 3. Ported multiple BT fixes for stability Yocto build, it requires to copy the files to: - lib/firmware/nxp/ Signed-off-by: Sherry Sun <sherry.sun@nxp.com> |