brcm: Create brcm Linux folder to hold Broadcom Bluetooth and Wifi firmware

Signed-off-by: Lauren Post <lauren.post@nxp.com>

Signed-off-by: Lauren Post <lauren.post@nxp.com>

brcm/1BW_BCM43340/bcmdhd.1BW.OOB.cal

@@ -0,0 +1,122 @@
+# Originally NVRAM file for BCM943341WLAGB_2 P203 board
+# For Murata 1BW
+manfid=0x2d0
+prodid=0x0653
+vendid=0x14e4
+devid=0x4386
+boardtype=0x0653
+boardrev=0x1203
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+sromrev=3
+boardflags=0x0080201
+xtalfreq=37400
+nocrc=1
+ag0=255
+aa2g=1
+ccode=ALL
+#PA parameters for 2.4GHz
+pa0b0=6706
+pa0b1=-814
+pa0b2=-191
+tssifloor2g=64
+# rssi params for 2.4GHz
+rssismf2g=0xf
+rssismc2g=0x8
+rssisav2g=0x1
+cckPwrOffset=1
+PwrOffset40mhz2g=8
+# rssi params for 5GHz
+rssismf5g=0xf
+rssismc5g=0x7
+#rssisav5g=0x1
+rssisav5g=0x3
+#PA parameters for lower a-band
+pa1lob0=5785
+pa1lob1=-714
+pa1lob2=-172
+tssifloor5gl=32
+#PA parameters for midband
+pa1b0=5880
+pa1b1=-721
+pa1b2=-174
+tssifloor5gm=34
+#PA paramasdeters for high band
+pa1hib0=6206
+pa1hib1=-722
+pa1hib2=-147
+tssifloor5gh=32
+rxpo5g=0
+
+maxp2ga0=0x4c
+#  19dBm board limit; 18dBm target
+#Per rate power back-offs for g band, in .5 dB steps. Set it once you have the right numbers.
+cck2gpo=0x2222 
+# R6~54 13 dBm
+ofdm2gpo=0xaaaaaaaa
+# M0~M3 16 dBm board limit; 15 dBm target 
+mcs2gpo0=0xcccc
+# M7 16dBm; M6 16 dBm; M5 16 dBm; M4 16 dBm board limit; 15 dBm target 
+mcs2gpo1=0xcccc
+
+# max power for 5G 15 dBm
+maxp5ga0=0x3c
+# 15 dBm board limit; 14 dBm target 
+maxp5gla0=0x3c
+maxp5gha0=0x3c
+#Per rate power back-offs for a band, in .5 dB steps. Set it once you have the right numbers.
+ofdm5gpo=0x22222222
+# R54 15dBm; R48 15 dBm; R6~R36 15 dBm board limit; 14 dBm target 
+ofdm5glpo=0x22222222
+ofdm5ghpo=0x22222222
+mcs5gpo0=0x4444
+# M0~M4 15dBm max ; 14 dBm target
+mcs5gpo1=0x4444
+# M7 15 dBm; M6 15 dBm; M5 15 dBm board limit; 14 dBm target
+mcs5glpo0=0x4444
+mcs5glpo1=0x4444
+mcs5ghpo0=0x4444
+mcs5ghpo1=0x0000
+
+swctrlmap_2g=0x00080008,0x00100010,0x00080008,0x011010,0x11f
+#swctrlmap_5g=0x00020002,0x00040004,0x00020002,0x011010,0x2fe
+## For GN04100
+swctrlmap_5g=0x00040004,0x00020002,0x00040004,0x011010,0x2fe
+gain=32
+triso2g=8
+triso5g=8
+#tx parameters
+loflag=0
+iqlocalidx5g=40
+dlocalidx5g=70
+iqcalidx5g=50
+lpbckmode5g=1 
+txiqlopapu5g=0
+txiqlopapu2g=0
+dlorange_lowlimit=5
+txalpfbyp=1
+txalpfpu=1
+dacrate2xen=1
+papden2g=1
+papden5g=1
+#rx parameters
+gain_settle_dly_2g=4
+gain_settle_dly_5g=4
+noise_cal_po_2g=-1
+noise_cal_po_40_2g=-1
+noise_cal_high_gain_2g=73
+noise_cal_nf_substract_val_2g=346
+noise_cal_po_5g=-1
+noise_cal_po_40_5g=-1
+noise_cal_high_gain_5g=73
+noise_cal_nf_substract_val_5g=346
+cckpapden=1
+aci_detect_en_2g=1
+interference=3
+# OOB IRQ settings -- comment out next 4 "sd" parameters for SDIO In-Band
+sd_gpout=0
+sd_oobonly=1
+sd_gpval=1
+sd_gpdc=0
+Comment out HW_OOB setting -- not used for 1BW
+#mux_enab=0x11

brcm/1BW_BCM43340/bcmdhd.1BW.SDIO.cal

@@ -0,0 +1,122 @@
+# Originally NVRAM file for BCM943341WLAGB_2 P203 board
+# For Murata 1BW
+manfid=0x2d0
+prodid=0x0653
+vendid=0x14e4
+devid=0x4386
+boardtype=0x0653
+boardrev=0x1203
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+sromrev=3
+boardflags=0x0080201
+xtalfreq=37400
+nocrc=1
+ag0=255
+aa2g=1
+ccode=ALL
+#PA parameters for 2.4GHz
+pa0b0=6706
+pa0b1=-814
+pa0b2=-191
+tssifloor2g=64
+# rssi params for 2.4GHz
+rssismf2g=0xf
+rssismc2g=0x8
+rssisav2g=0x1
+cckPwrOffset=1
+PwrOffset40mhz2g=8
+# rssi params for 5GHz
+rssismf5g=0xf
+rssismc5g=0x7
+#rssisav5g=0x1
+rssisav5g=0x3
+#PA parameters for lower a-band
+pa1lob0=5785
+pa1lob1=-714
+pa1lob2=-172
+tssifloor5gl=32
+#PA parameters for midband
+pa1b0=5880
+pa1b1=-721
+pa1b2=-174
+tssifloor5gm=34
+#PA paramasdeters for high band
+pa1hib0=6206
+pa1hib1=-722
+pa1hib2=-147
+tssifloor5gh=32
+rxpo5g=0
+
+maxp2ga0=0x4c
+#  19dBm board limit; 18dBm target
+#Per rate power back-offs for g band, in .5 dB steps. Set it once you have the right numbers.
+cck2gpo=0x2222 
+# R6~54 13 dBm
+ofdm2gpo=0xaaaaaaaa
+# M0~M3 16 dBm board limit; 15 dBm target 
+mcs2gpo0=0xcccc
+# M7 16dBm; M6 16 dBm; M5 16 dBm; M4 16 dBm board limit; 15 dBm target 
+mcs2gpo1=0xcccc
+
+# max power for 5G 15 dBm
+maxp5ga0=0x3c
+# 15 dBm board limit; 14 dBm target 
+maxp5gla0=0x3c
+maxp5gha0=0x3c
+#Per rate power back-offs for a band, in .5 dB steps. Set it once you have the right numbers.
+ofdm5gpo=0x22222222
+# R54 15dBm; R48 15 dBm; R6~R36 15 dBm board limit; 14 dBm target 
+ofdm5glpo=0x22222222
+ofdm5ghpo=0x22222222
+mcs5gpo0=0x4444
+# M0~M4 15dBm max ; 14 dBm target
+mcs5gpo1=0x4444
+# M7 15 dBm; M6 15 dBm; M5 15 dBm board limit; 14 dBm target
+mcs5glpo0=0x4444
+mcs5glpo1=0x4444
+mcs5ghpo0=0x4444
+mcs5ghpo1=0x0000
+
+swctrlmap_2g=0x00080008,0x00100010,0x00080008,0x011010,0x11f
+#swctrlmap_5g=0x00020002,0x00040004,0x00020002,0x011010,0x2fe
+## For GN04100
+swctrlmap_5g=0x00040004,0x00020002,0x00040004,0x011010,0x2fe
+gain=32
+triso2g=8
+triso5g=8
+#tx parameters
+loflag=0
+iqlocalidx5g=40
+dlocalidx5g=70
+iqcalidx5g=50
+lpbckmode5g=1 
+txiqlopapu5g=0
+txiqlopapu2g=0
+dlorange_lowlimit=5
+txalpfbyp=1
+txalpfpu=1
+dacrate2xen=1
+papden2g=1
+papden5g=1
+#rx parameters
+gain_settle_dly_2g=4
+gain_settle_dly_5g=4
+noise_cal_po_2g=-1
+noise_cal_po_40_2g=-1
+noise_cal_high_gain_2g=73
+noise_cal_nf_substract_val_2g=346
+noise_cal_po_5g=-1
+noise_cal_po_40_5g=-1
+noise_cal_high_gain_5g=73
+noise_cal_nf_substract_val_5g=346
+cckpapden=1
+aci_detect_en_2g=1
+interference=3
+# OOB IRQ settings -- comment out next 4 "sd" parameters for SDIO In-Band
+#sd_gpout=0
+#sd_oobonly=1
+#sd_gpval=1
+#sd_gpdc=0
+Comment out HW_OOB setting -- not used for 1BW
+#mux_enab=0x11

brcm/1DX_BCM4343W/bcmdhd.1DX.OOB.cal

@@ -0,0 +1,42 @@
+# 2.4 GHz, 20 MHz BW mode
+manfid=0x2d0
+prodid=0x0726
+vendid=0x14e4
+devid=0x43e2
+boardtype=0x0726
+boardrev=0x1202
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+sromrev=11
+boardflags=0x00404201
+boardflags3=0x08000000
+xtalfreq=37400
+nocrc=1
+ag0=0
+aa2g=1
+ccode=ALL
+#pa0itssit=0x20
+extpagain2g=0
+pa2ga0=-168,7161,-820
+AvVmid_c0=0x0,0xc8
+cckpwroffset0=5
+maxp2ga0=90
+#txpwrbckof=6
+cckbw202gpo=0
+legofdmbw202gpo=0x66111111
+mcsbw202gpo=0x77711111
+propbw202gpo=0xdd
+ofdmdigfilttype=18
+ofdmdigfilttypebe=18
+papdmode=1
+papdvalidtest=1
+pacalidx2g=48
+papdepsoffset=-22
+papdendidx=58
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+muxenab=0x10
+#BT COEX deferral limit setting
+#btc_params 8 45000
+#btc_params 10 20000
+#spurconfig=0x3

brcm/1DX_BCM4343W/bcmdhd.1DX.SDIO.cal

@@ -0,0 +1,42 @@
+# 2.4 GHz, 20 MHz BW mode
+manfid=0x2d0
+prodid=0x0726
+vendid=0x14e4
+devid=0x43e2
+boardtype=0x0726
+boardrev=0x1202
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+sromrev=11
+boardflags=0x00404201
+boardflags3=0x08000000
+xtalfreq=37400
+nocrc=1
+ag0=0
+aa2g=1
+ccode=ALL
+#pa0itssit=0x20
+extpagain2g=0
+pa2ga0=-168,7161,-820
+AvVmid_c0=0x0,0xc8
+cckpwroffset0=5
+maxp2ga0=90
+#txpwrbckof=6
+cckbw202gpo=0
+legofdmbw202gpo=0x66111111
+mcsbw202gpo=0x77711111
+propbw202gpo=0xdd
+ofdmdigfilttype=18
+ofdmdigfilttypebe=18
+papdmode=1
+papdvalidtest=1
+pacalidx2g=48
+papdepsoffset=-22
+papdendidx=58
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+#muxenab=0x10
+#BT COEX deferral limit setting
+#btc_params 8 45000
+#btc_params 10 20000
+#spurconfig=0x3

brcm/EULA.txt

@@ -0,0 +1,615 @@
+LA_OPT_BASE_LICENSE v13 March 2016
+
+
+
+IMPORTANT.  Read the following NXP Semiconductors Software License Agreement
+("Agreement") completely.    By selecting the "I Accept" button at the end of
+this page, you indicate that you accept the terms of the Agreement and you
+acknowledge that you have the authority, for yourself or on behalf of your
+company, to bind your company to these terms.  You may then download or install
+the file.
+
+
+
+NXP SEMICONDUCTORS SOFTWARE LICENSE AGREEMENT
+
+
+
+This is a legal agreement between you, as an authorized representative of your
+employer, or if you have no employer, as an individual (together "you"), and
+Freescale Semiconductor, Inc., a wholly-owned subsidiary of NXP Semiconductors
+N.V. ("NXP").  It concerns your rights to use the software identified in the
+Software Content Register and provided to you in binary or source code form and
+any accompanying written materials (the "Licensed Software"). The Licensed
+Software may include any updates or error corrections or documentation relating
+to the Licensed Software provided to you by NXP under this License. In
+consideration for NXP allowing you to access the Licensed Software, you are
+agreeing to be bound by the terms of this Agreement. If you do not agree to all
+of the terms of this Agreement, do not download or install the Licensed
+Software. If you change your mind later, stop using the Licensed Software and
+delete all copies of the Licensed Software in your possession or control. Any
+copies of the Licensed Software that you have already distributed, where
+permitted, and do not destroy will continue to be governed by this Agreement.
+Your prior use will also continue to be governed by this Agreement.
+
+1.       DEFINITIONS
+
+1.1.             "Affiliates" means, any corporation, or entity directly or
+indirectly controlled by, controlling, or under common control with NXP
+Semiconductors N.V.
+
+1.2.             "Essential Patent" means a patent to the limited extent that
+infringement of such patent cannot be avoided in remaining compliant with the
+technology standards implicated by the usage of any of the Licensed Software,
+including optional implementation of the standards, on technical but not
+commercial grounds, taking into account normal technical practice and the state
+of the art generally available at the time of standardization.
+
+1.3.             "Intellectual Property Rights" means any and all rights under
+statute, common law or equity in and under copyrights, trade secrets, and
+patents (including utility models), and analogous rights throughout the world,
+including any applications for and the right to apply for, any of the foregoing.
+
+1.4.             "Software Content Register" means the documentation
+accompanying the Licensed Software which identifies the contents of the
+Licensed Software, including but not limited to identification of any Third
+Party Software.
+
+1.5.             "Third Party Software" means, any software included in the
+Licensed Software that is not NXP Proprietary software, and is not open source
+software, and to which different license terms may apply.
+
+2.       LICENSE GRANT.
+
+2.1.             Separate license grants to Third Party Software, or other
+terms applicable to the Licensed Software if different from those granted in
+this Section 2, are contained in Appendix A.  The Licensed Software is
+accompanied by a Software Content Register which will identify that portion of
+the Licensed Software, if any, that is subject to the different terms in
+Appendix A.
+
+2.2.             Exclusively in connection with your development and
+distribution of product containing a programmable processing unit (e.g. a
+microprocessor, microcontroller, sensor or digital signal processor) supplied
+directly or indirectly from NXP ("Authorized System") NXP grants you a
+world-wide, personal, non-transferable, non-exclusive, non-sublicensable,
+license, under NXP's Intellectual Property Rights:
+
+(a)    to use and reproduce the Licensed Software only as part of, or
+integrated within, Authorized Systems and not on a standalone basis;
+
+(b)   to directly or indirectly manufacture, demonstrate, copy, distribute,
+market and sell the Licensed Software in object code (machine readable) only as
+part of, or embedded within, Authorized Systems in object code form and not on
+a standalone basis.  Notwithstanding the foregoing, those files marked as .h
+files ("Header files") may be distributed in source or object code form, but
+only as part of, or embedded within Authorized Systems.
+
+(c)     to copy, use and distribute as needed, solely in connection with an
+Authorized System, proprietary NXP information associated with the Licensed
+Software for the purpose of developing, maintaining and supporting Authorized
+Systems with which the Licensed Software is integrated or associated.
+
+2.3.             For NXP Licensed Software provided to you in source code form
+(human readable), NXP further grants to you a worldwide, personal,
+non-transferable, non-exclusive, non-sublicensable, license, under NXP's
+Intellectual Property Rights:
+
+(a)    to prepare derivative works of the Licensed Software, only as part of,
+or integrated within, Authorized Systems and not on a standalone basis;
+
+(b)     to use, demonstrate, copy, distribute, market and sell the derivative
+works of the Licensed Software in object code (machine readable) only as part
+of, or integrated within, Authorized Systems and not on a standalone basis.
+Notwithstanding the foregoing, those files marked as .h files ("Header files")
+may be distributed in source or object code form, but only as part of, or
+embedded within Authorized Systems.
+
+2.4.             You may use subcontractors on your premises to exercise your
+rights under Section 2.2 and 2.3 so long as you have an agreement in place with
+the subcontractor containing confidentiality restrictions no less stringent
+than those contained in this Agreement.  You will remain liable for your
+subcontractors' adherence to the terms of this Agreement and for any and all
+acts and omissions of such subcontractors with respect to this Agreement and
+the Licensed Software.
+
+3.       LICENSE LIMITATIONS AND RESTRICTIONS.
+
+3.1.             The licenses granted above in Section 2.3 only extend to NXP
+intellectual property rights that would be infringed by the Licensed Software
+prior to your preparation of any derivative work.
+
+3.2.             The Licensed Software is licensed to you, not sold.  Title to
+Licensed Software delivered hereunder remains vested in NXP or NXP's licensor
+and cannot be assigned or transferred.  You are expressly forbidden from
+selling or otherwise distributing the Licensed Software, or any portion
+thereof, except as expressly permitted herein.  This Agreement does not grant
+to you any implied rights under any NXP or third party intellectual property.
+
+3.3.             You may not translate, reverse engineer, decompile, or
+disassemble the Licensed Software except to the extent applicable law
+specifically prohibits such restriction.  You must prohibit your sub-licensees
+from translating, reverse engineering, decompiling, or disassembling the
+Licensed Software except to the extent applicable law specifically prohibits
+such restriction.
+
+3.4.             You must reproduce any and all of NXP's (or its third party
+licensor's) copyright notices and other proprietary legends on copies of
+Licensed Software.
+
+3.5.             If you distribute the Licensed Software to the United States
+Government, then the Licensed Software is "restricted computer software" and is
+subject to FAR 52.227-19 (c)(1) and (c)(2).
+
+3.6.             You grant to NXP a non-exclusive, non-transferable,
+irrevocable, perpetual, worldwide, royalty-free, sub-licensable license under
+your Intellectual Property Rights to use without restriction and for any
+purpose any suggestion, comment or other feedback related to the Licensed
+Software (including, but not limited to, error corrections and bug fixes).
+
+3.7.             You will not take or fail to take any action that could
+subject the Licensed Software to an Excluded License. An Excluded License means
+any license that requires, as a condition of use, modification or distribution
+of software subject to the Excluded License, that such software or other
+software combined and/or distributed with the software be (i) disclosed or
+distributed in source code form; (ii) licensed for the purpose of making
+derivative works; or (iii) redistributable at no charge.
+
+3.8.             You may not publish or distribute information, results or data
+associated with the use of the Licensed Software to anyone other than NXP;
+however, you must advise NXP of any results obtained including any problems or
+suggested improvements thereof.  NXP retains the right to use such results and
+related information in any manner it deems appropriate.
+
+4.       OPEN SOURCE.         Open source software included in the Licensed
+Software is not licensed under the terms of this Agreement, but is instead
+licensed under the terms of the applicable open source license(s), such as the
+BSD License, Apache License or the GNU Lesser General Public License.  Your use
+of the open source software is subject to the terms of each applicable license.
+ You must agree to the terms of each applicable license, or you cannot use the
+open source software.
+
+5.       INTELLECTUAL PROPERTY RIGHTS.    Subject to NXP's ownership interest
+in the underlying Licensed Software, all intellectual property rights
+associated with, and title to, your Authorized System will be retained by or
+will vest in you. Your modifications to the Licensed Software, and all
+intellectual property rights associated with, and title thereto, will be the
+property of NXP.  Upon request, you must provide NXP the source code of any
+derivative of the Licensed Software.  You agree to assign all, and hereby do
+assign all rights, title, and interest to any such modifications to the
+Licensed Software to NXP and agree to provide all assistance reasonably
+requested by NXP to establish, preserve or enforce such right.  Further, you
+agree to waive all moral rights relating to your modifications to the Licensed
+Software, including, without limitation, all rights of identification of
+authorship and all rights of approval, restriction, or limitation on use or
+subsequent modification.  Notwithstanding the foregoing, you will have the
+license rights granted in Section 2 hereto to any such modifications made by
+you or your licensees.
+
+6.       PATENT COVENANT NOT TO SUE. As partial, material consideration for the
+rights granted to you under this Agreement, you covenant not to sue or
+otherwise assert your patents against NXP, a NXP Affiliate or subsidiary, or a
+NXP licensee of the Licensed Software for infringement of your Intellectual
+Property Rights by the manufacture, use, sale, offer for sale, importation or
+other disposition or promotion of the Licensed Software and/or any
+redistributed portions of the Licensed Software.
+
+7.       ESSENTIAL PATENTS.  You are solely responsible for obtaining licenses
+for any relevant Essential Patents for your use in connection with technology
+that you incorporate into your product (whether as part of the Licensed
+Software or not).
+
+8.       TERM AND TERMINATION.   This Agreement will remain in effect unless
+terminated as provided in this Section 8.
+
+8.1.             You may terminate this Agreement immediately upon written
+notice to NXP at the address provided below.
+
+8.2.             Either party may terminate this Agreement if the other party
+is in default of any of the terms and conditions of this Agreement, and
+termination is effective if the defaulting party fails to correct such default
+within 30 days after written notice thereof by the non-defaulting party to the
+defaulting party at the address below.
+
+8.3.             Notwithstanding the foregoing, NXP may terminate this
+Agreement immediately upon written notice if you: breach any of your
+confidentiality obligations or the license restrictions under this Agreement;
+become bankrupt, insolvent, or file a petition for bankruptcy or insolvency,
+make an assignment for the benefit of its creditors; enter proceedings for
+winding up or dissolution ;are dissolved; or are nationalized or become subject
+to the expropriation of all or substantially all of its business or assets.
+
+8.4.             Upon termination of this Agreement, all licenses granted under
+Section 2 will expire, except that any licenses extended to end-users pursuant
+to Sections 2.2(b), 2.2(c), and 2.3(b), which have been granted prior to such
+termination will survive.
+
+8.5.             After termination of this Agreement by either party and upon
+NXP's written request, you will, at your discretion, return to the NXP any
+confidential information including all copies thereof or furnish to NXP at the
+address below, a statement certifying, with respect to the Licensed Software
+delivered hereunder that the original and all copies, except for archival
+copies to be used solely for dispute resolution purposes, in whole or in part,
+in any form, of the Licensed Software have been destroyed.
+
+8.6.             Notwithstanding the termination of this Agreement for any
+reason, the terms of Sections 1, 3, 5 through 25 will survive.
+
+9.                   SUPPORT.  NXP is not obligated to provide any support,
+upgrades or new releases of the Licensed Software under this Agreement. If you
+wish, you may contact NXP and report problems and provide suggestions regarding
+the Licensed Software. NXP has no obligation to respond to such a problem
+report or suggestion. NXP may make changes to the Licensed Software at any
+time, without any obligation to notify or provide updated versions of the
+Licensed Software to you.
+
+10.               NO WARRANTY.  To the maximum extent permitted by law, NXP
+expressly disclaims any warranty for the Licensed Software.  The Licensed
+Software is provided "AS IS", without warranty of any kind, either express or
+implied, including without limitation the implied warranties of
+merchantability, fitness for a particular purpose, or non-infringement.  You
+assume the entire risk arising out of the use or performance of the licensed
+software, or any systems you design using the licensed software (if any).
+
+11.               INDEMNITY. You agree to fully defend and indemnify NXP from
+all claims, liabilities, and costs (including reasonable attorney's fees)
+related to (1) your use (including your contractors or distributee's use, if
+permitted) of the Licensed Software or (2) your violation of the terms and
+conditions of this Agreement.
+
+12.               LIMITATION OF LIABILITY.  EXCLUDING LIABILITY FOR A BREACH OF
+SECTION 2 (LICENSE GRANTS), SECTION 3 (LICENSE LIMITATIONS AND RESTRICTIONS),
+SECTION 17 (CONFIDENTIAL INFORMATION), OR CLAIMS UNDER SECTION 11(INDEMNITY),
+IN NO EVENT WILL EITHER PARTY BE LIABLE, WHETHER IN CONTRACT, TORT, OR
+OTHERWISE, FOR ANY INCIDENTAL, SPECIAL, INDIRECT, CONSEQUENTIAL OR PUNITIVE
+DAMAGES, INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR ANY LOSS OF USE, LOSS OF
+TIME, INCONVENIENCE, COMMERCIAL LOSS, OR LOST PROFITS, SAVINGS, OR REVENUES, TO
+THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.  NXP'S TOTAL LIABILITY FOR ALL
+COSTS, DAMAGES, CLAIMS, OR LOSSES WHATSOEVER ARISING OUT OF OR IN CONNECTION
+WITH THIS AGREEMENT OR PRODUCT(S) SUPPLIED UNDER THIS AGREEMENT IS LIMITED TO
+THE AGGREGATE AMOUNT PAID BY YOU TO NXP IN CONNECTION WITH THE LICENSED
+SOFTWARE TO WHICH LOSSES OR DAMAGES ARE CLAIMED.
+
+13.               EXPORT COMPLIANCE. Each party shall comply with all
+applicable export and import control laws and regulations including but not
+limited to the US Export Administration Regulations (including prohibited party
+lists issued by other federal governments), Catch-all regulations and all
+national and international embargoes. Each party further agrees that it will
+not knowingly transfer, divert, export or re-export, directly or indirectly,
+any product, software, including software source code, or technology restricted
+by such regulations or by other applicable national regulations, received from
+the other party under this Agreement, or any direct product of such software or
+technical data to any person, firm, entity, country or destination to which
+such transfer, diversion, export or re-export is restricted or prohibited,
+without obtaining prior written authorization from the applicable competent
+government authorities to the extent required by those laws.
+
+14.   GOVERNMENT CONTRACT COMPLIANCE.
+
+14.1.          If you sell Authorized Systems directly to any government or
+public entity, including U.S., state, local, foreign or international
+governments or public entities, or indirectly via a prime contractor or
+subcontractor of such governments or entities, NXP makes no representations,
+certifications, or warranties whatsoever about compliance with government or
+public entity acquisition statutes or regulations, including, without
+limitation, statutes or regulations that may relate to pricing, quality, origin
+or content.
+
+14.2.          The Licensed Software has been developed at private expense and
+is a "Commercial Item" as defined in 48 C.F.R. §2.101, consisting of
+"Commercial Computer Software", and/or "Commercial Computer Software
+Documentation," as such terms are used in 48 C.F.R. §12.212 (or 48 C.F.R.
+§227.7202, as applicable) and may only be licensed to or shared with U.S.
+Government end users in object code form as part of, or embedded within,
+Authorized Systems.  Any agreement pursuant to which you share the Licensed
+Software will include a provision that reiterates the limitations of this
+document and requires all sub-agreements to similarly contain such limitations.
+
+15.               SAFETY CRITICAL APPLICATIONS
+
+15.1.          In some cases, NXP may promote certain Licensed Software for use
+in safety-related applications. NXP's goal is to educate licensees so that they
+can design their own end-product solutions to meet applicable functional safety
+standards and requirements.  You make the ultimate design decisions regarding
+your products and are solely responsible for compliance with all legal,
+regulatory, safety, and security related requirements concerning your products,
+regardless of any information or support that may be provided by NXP.
+Accordingly, you will indemnify and hold NXP harmless from any claims,
+liabilities, damages and associated costs and expenses (including attorneys'
+fees) that NXP may incur related to your incorporation of any product in a
+safety-critical application or system.
+
+15.2.          Only Licensed Software that NXP has specifically designated as
+"Automotive Qualified" is intended for use in automotive, military, or
+aerospace applications or environments.  If you use Licensed Software that has
+not been designated as "Automotive Qualified" in an automotive, military, or
+aerospace application or environment, you do so at your own risk.
+
+15.3.          Licensed Software is not intended or authorized for any use in
+anti-personnel landmines.
+
+16.              CHOICE OF LAW; VENUE.  This Agreement will be governed by,
+construed, and enforced in accordance with the laws of the State of Texas, USA,
+without regard to conflicts of laws principles, will apply to all matters
+relating to this Agreement or the Licensed Software, and you agree that any
+litigation will be subject to the exclusive jurisdiction of the state or
+federal courts Texas, USA.  The United Nations Convention on Contracts for the
+International Sale of Goods will not apply to this document.
+
+17.               CONFIDENTIAL INFORMATION.  Subject to the license grants and
+restrictions contained herein, you must treat the Licensed Software as
+confidential information and you agree to retain the Licensed Software in
+confidence perpetually, with respect to Licensed Software in source code form
+(human readable), or for a period of five (5) years from the date of
+termination of this Agreement, with respect to all other parts of the Licensed
+Software.  During this period, you may not disclose any part of the Licensed
+Software to anyone other than employees who have a need to know of the Licensed
+Software and who have executed written agreements obligating them to protect
+such Licensed Software to at least the same degree of care as in this
+Agreement.  You agree to use the same degree of care, but no less than a
+reasonable degree of care, with the Licensed Software as you do with your own
+confidential information. You may disclose Licensed Software to the extent
+required by a court or under operation of law or order provided that you notify
+NXP of such requirement prior to disclosure, which you only disclose
+information required, and that you allow NXP the opportunity to object to such
+court or other legal body requiring such disclosure.
+
+18.               TRADEMARKS.  You are not authorized to use any NXP
+trademarks, brand names, or logos.
+
+19.               ENTIRE AGREEMENT.  This Agreement constitutes the entire
+agreement between you and NXP regarding the subject matter of this Agreement,
+and supersedes all prior communications, negotiations, understandings,
+agreements or representations, either written or oral, if any.  This Agreement
+may only be amended in written form, signed by you and NXP.
+
+20.               SEVERABILITY.  If any provision of this Agreement is held for
+any reason to be invalid or unenforceable, then the remaining provisions of
+this Agreement will be unimpaired and, unless a modification or replacement of
+the invalid or unenforceable provision is further held to deprive you or NXP of
+a material benefit, in which case the Agreement will immediately terminate, the
+invalid or unenforceable provision will be replaced with a provision that is
+valid and enforceable and that comes closest to the intention underlying the
+invalid or unenforceable provision.
+
+21.               NO WAIVER.  The waiver by NXP of any breach of any provision
+of this Agreement will not operate or be construed as a waiver of any other or
+a subsequent breach of the same or a different provision.
+
+22.               AUDIT.  You will keep full, clear and accurate records with
+respect to your compliance with the limited license rights granted under this
+Agreement for three years following expiration or termination of this
+Agreement. NXP will have the right, either itself or through an independent
+certified public accountant to examine and audit, at NXP's expense, not more
+than once a year, and during normal business hours, all such records that may
+bear upon your compliance with the limited license rights granted above. You
+must make prompt adjustment to compensate for any errors and/or omissions
+disclosed by such examination or audit.
+
+23.               NOTICES.             All notices and communications under
+this Agreement will be made in writing, and will be effective when received at
+the following addresses:
+
+NXP:                   Freescale Semiconductor, Inc.
+
+                            6501 William Cannon West    OE62
+
+                            Austin, Texas 78735
+
+                            ATTN: Legal Department
+
+
+
+                You:                      The address provided at registration
+will be used.
+
+24.               RELATIONSHIP OF THE PARTIES.     The parties are independent
+contractors.  Nothing in this Agreement will be construed to create any
+partnership, joint venture, or similar relationship.  Neither party is
+authorized to bind the other to any obligations with third parties.
+
+25.               SUCCESSION AND ASSIGNMENT.   This Agreement will be binding
+upon and inure to the benefit of the parties and their permitted successors and
+assigns.  You may not assign this Agreement, or any part of this Agreement,
+without the prior written approval of NXP, which approval will not be
+unreasonably withheld or delayed.
+
+
+
+
+APPENDIX A
+
+Other License Grants and Restrictions:
+
+The Licensed Software may include some or all of the following software, which
+is either 1) not NXP proprietary software or 2) NXP proprietary software
+subject to different terms than those in the Agreement.  If the Software
+Content Register that accompanies the Licensed Software identifies any of the
+following Third Party Software or specific components of the NXP Proprietary
+Software, the following terms apply to the extent they deviate from the terms
+in the Agreement:
+Third Party Software
+
+
+Use Restrictions
+Atheros
+
+
+Use of Atheros software is limited to evaluation and demonstration only.
+Permitted distributions must be similarly limited. Further rights must be
+obtained directly from Atheros.
+ATI (AMD)
+
+
+Distribution of ATI software must be a part of, or embedded within, Authorized
+Systems that include a ATI graphics processor core.
+Broadcom Corporation
+
+
+Your use of Broadcom Corporation software is restricted to Authorized Systems
+that incorporate a compatible integrated circuit device manufactured or sold by
+Broadcom.
+Cirque Corporation
+
+
+Use of Cirque Corporation technology is limited to evaluation, demonstration,
+or certification testing only. Permitted distributions must be similarly
+limited. Further rights, including but not limited to ANY commercial
+distribution rights, must be obtained directly from Cirque Corporation.
+Coding Technologies (Dolby Labs)
+
+
+Use of CTS software is limited to evaluation and demonstration only.  Permitted
+distributions must be similarly limited. Further rights must be obtained from
+Dolby Laboratories.
+CSR
+
+
+Use of Cambridge Silicon Radio, Inc. ("CSR") software is limited to evaluation
+and demonstration only.  Permitted distributions must be similarly limited.
+Further rights must be obtained directly from CSR.
+NXP Wireless Charging Library
+
+
+License to the Software is limited to use in inductive coupling or wireless
+charging applications
+Global Locate (Broadcom Corporation)
+
+
+Use of Global Locate, Inc. software is limited to evaluation and demonstration
+only.  Permitted distributions must be similarly limited.  Further rights must
+be obtained from Global Locate.
+Imagination Technologies Limited (IMG)
+
+
+If the Licensed Software includes proprietary software developed by IMG, your
+rights are limited to a non-exclusive, world-wide right and non-transferrable
+and non-sub-licensable license (i) to use and modify the Licensed Software and
+documentation and (ii) to copy and distribute the Licensed Software only in
+object code form solely for use on NXP Rayleigh products.  If you are provided
+with the Licensed Software in source code format, you are restricted to
+accessing only those deliverables in source code format which are necessary for
+you to carry out either specific customization or porting work in association
+with NXP's Rayleigh products or your Authorized System.
+
+The confidentiality restrictions shall continue in force without limit in time
+notwithstanding the termination or expiration of this Agreement.
+Micrium
+
+
+uC/OS-II and uC/OS-III is provided in source form for FREE short-term
+evaluation, for educational use or for peaceful research.  If you plan or
+intend to use uC/OS-II or uC/OS-III in a commercial application/product then,
+you need to contact Micrium to properly license uC/OS-II or uC/OS-III for its
+use in your application/product.   We provide ALL the source code for your
+convenience and to help you experience uC/OS-II or uC/OS-III.  The fact that
+the source is provided does NOT mean that you can use it commercially without
+paying a licensing fee.
+Microsoft
+
+
+If the Licensed Software includes software owned by Microsoft Corporation
+("Microsoft"), it is subject to the terms of your license with Microsoft (the
+"Microsoft Underlying Licensed Software") and as such, NXP grants no license to
+you, beyond evaluation and demonstration in connection with NXP processors, in
+the Microsoft Underlying Licensed Software.  You must separately obtain rights
+beyond evaluation and demonstration in connection with the Microsoft Underlying
+Licensed Software from Microsoft.
+
+Microsoft does not provide support services for the components provided to you
+through this Agreement.  If you have any questions or require technical
+assistance, please contact NXP.  Microsoft Corporation is a third party
+beneficiary to this Agreement with the right to enforce the terms of this
+Agreement.  TO THE MAXIMUM EXTENT PERMITTED BY LAW, MICROSOFT AND ITS
+AFFILIATES DISCLAIM ANY WARRANTIES FOR THE MICROSOFT UNDERLYING LICENSED
+SOFTWARE.  TO THE MAXIMUM EXTENT PERMITTED BY LAW, NEITHER MICROSOFT NOR ITS
+AFFILIATES WILL BE LIABLE, WHETHER IN CONTRACT, TORT, OR OTHERWISE, FOR ANY
+DIRECT, INCIDENTAL, SPECIAL, INDIRECT, CONSEQUENTIAL OR PUNITIVE DAMAGES,
+INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR ANY LOSS OF USE, LOSS OF TIME,
+INCONVENIENCE, COMMERCIAL LOSS, OR LOST PROFITS, SAVINGS, OR REVENUES, ARISING
+FROM THE FROM THE USE OF THE MICROSOFT UNDERLYING LICENSED SOFTWARE.
+MindTree
+
+
+Notwithstanding the terms contained in Section 2.3 (a), if the Licensed
+Software includes proprietary software of MindTree in source code format,
+Licensee may make modifications and create derivative works only to the extent
+necessary for debugging of the Licensed Software.
+MPEG LA
+
+
+Use of MPEG LA audio or video codec technology is limited to evaluation and
+demonstration only . Permitted distributions must be similarly limited. Further
+rights must be obtained directly from MPEG LA.
+MQX RTOS Code
+
+
+MQX RTOS source code may not be re-distributed by any FSL Licensee under any
+circumstance, even by a signed written amendment to this Agreement.
+Opus
+
+
+Use of Opus software must be consistent with the terms of the Opus license
+which can be found at: {http://www.opus-codec.org/license/}
+Real Networks - its GStreamer Optimized Real Format Client Code implementation
+or OpenMax Optimized Real Format Client Code
+
+
+Use of the GStreamer Optimized Real Format Client Code, or OpenMax Optimized
+Real Format Client code is restricted to applications in the automotive market.
+ Licensee must be a final manufacturer in good standing with a current license
+with Real Networks for the commercial use and distribution of products
+containing the GStreamer Optimized Real Format Client Code implementation or
+OpenMax Optimized Real Format Client Code
+SanDisk Corporation
+
+
+If the Licensed Software includes software developed by SanDisk Corporation
+("SanDisk"), you must separately obtain the rights to reproduce and distribute
+this software in source code form from SanDisk.  Please follow these easy steps
+to obtain the license and software:
+
+1.       Contact your local SanDisk sales representative to obtain the SanDisk
+License Agreement.
+
+2.       Sign the license agreement.  Fax the signed agreement to SanDisk USA
+marketing department at 408-542-0403.  The license will be valid when fully
+executed by SanDisk.
+
+3.       If you have specific questions, please send an email to
+sales@sandisk.com
+
+You may only use the SanDisk Corporation Licensed Software on products
+compatible with a SanDisk Secure Digital Card.  You may not use the SanDisk
+Corporation Licensed Software on any memory device product.  SanDisk retains
+all rights to any modifications or derivative works to the SanDisk Corporation
+Licensed Software that you may create.
+Synopsys/Target Compiler Technologies
+
+
+Your use of the Synopsys/Target Compiler Technologies Licensed Software and
+related documentation is subject to the following:
+  * Duration of the license for the Licensed Software is limited to 12 months,
+unless otherwise specified in the license file.
+  * The Licensed Software is usable by one user at a time on a single
+designated computer, unless otherwise agreed by Synopsys.
+  * Licensed Software and documentation are to be used only on a designated
+computer at the designated physical address provided by you on the APEX license
+form.
+  * The Licensed Software is not sub-licensable.
+Texas Instruments
+
+
+Your use of Texas Instruments Inc. WiLink8 Licensed Software is restricted to
+NXP SoC based systems that include a compatible connectivity device
+manufactured by TI.
+Vivante
+
+
+Distribution of Vivante software must be a part of, or embedded within,
+Authorized Systems that include a Vivante Graphics Processing Unit.
+
+
+
+
+

brcm/README

@@ -0,0 +1,4 @@
+These subdirectories provide firmware for Broadcom Bluetooth and Wifi support for i.MX Linux Releases.
+
+A more complete installation for Broadcom Bluetooth and Wifi enablement is available on 
+nxp.com/imx6tools in the Broadcom Firmware package under Linux.

brcm/SCR-brcm.txt

@@ -0,0 +1,17 @@
+NXP Software Content Register
+
+Package:                   imx-firmware/brcm
+
+Outgoing License:          LA_OPT_BASE_LICENSE
+
+License Files:             EULA.txt: LA_OPT_BASE_LICENSE
+
+Package Category:          BSP
+
+Type of content:           Binaries, recipes
+
+Description and comments:  Bluetooth Firmware in hcd files, Wifi firmware bin files.  cal text files
+
+Release Location:          N/A
+
+Origin:                    Broadcom Corporation (proprietary)

brcm/SN8000_BCM43362/bcmdhd.SN8000.OOB.cal

@@ -0,0 +1,46 @@
+#SN8000 Wi-Fi Module NVRAM
+manfid=0x2d0
+prodid=0x4336
+vendid=0x14e4
+devid=0x4343
+boardtype=0x0598
+boardrev=0x1207
+boardnum=777
+xtalfreq=26000
+clkreq_conf=1
+boardflags=0xa00
+sromrev=3
+wl0id=0x431b
+macaddr=00:90:4c:07:71:12
+aa2g=1
+ag0=2
+maxp2ga0=78
+ofdm2gpo=0x54321111
+mcs2gpo0=0x4444
+mcs2gpo1=0x8765
+pa0b0=0x14B8
+pa0b1=0xFD5C
+pa0b2=0xFF27
+pa0itssit=62
+pa1itssit=62
+cck2gpo=0
+cckPwrOffset=0
+cckdigfilttype=22
+ccode=0
+rssismf2g=0xa
+rssismc2g=0x3
+rssisav2g=0x7
+rfreg033=0x19
+rfreg033_cck=0x1f
+triso2g=1
+noise_cal_enable_2g=0
+pacalidx2g=10
+swctrlmap_2g=0x0c050c05,0x0a030a03,0x0a030a03,0x0,0x1ff
+RAW1=4a 0b ff ff 20 04 d0 02 62 a9
+logen_mode=0x0,0x2,0x1b,0x0,0x1b
+noise_cal_po_2g=2
+noise_cal_dbg.fab.3=1
+noise_cal_high_gain.fab.3=76
+noise_cal_nf_substract_val.fab.3=356
+noise_cal_po_2g.fab.3=4
+muxenab=0x10

brcm/SN8000_BCM43362/bcmdhd.SN8000.SDIO.cal

@@ -0,0 +1,46 @@
+#SN8000 Wi-Fi Module NVRAM
+manfid=0x2d0
+prodid=0x4336
+vendid=0x14e4
+devid=0x4343
+boardtype=0x0598
+boardrev=0x1207
+boardnum=777
+xtalfreq=26000
+clkreq_conf=1
+boardflags=0xa00
+sromrev=3
+wl0id=0x431b
+macaddr=00:90:4c:07:71:12
+aa2g=1
+ag0=2
+maxp2ga0=78
+ofdm2gpo=0x54321111
+mcs2gpo0=0x4444
+mcs2gpo1=0x8765
+pa0b0=0x14B8
+pa0b1=0xFD5C
+pa0b2=0xFF27
+pa0itssit=62
+pa1itssit=62
+cck2gpo=0
+cckPwrOffset=0
+cckdigfilttype=22
+ccode=0
+rssismf2g=0xa
+rssismc2g=0x3
+rssisav2g=0x7
+rfreg033=0x19
+rfreg033_cck=0x1f
+triso2g=1
+noise_cal_enable_2g=0
+pacalidx2g=10
+swctrlmap_2g=0x0c050c05,0x0a030a03,0x0a030a03,0x0,0x1ff
+RAW1=4a 0b ff ff 20 04 d0 02 62 a9
+logen_mode=0x0,0x2,0x1b,0x0,0x1b
+noise_cal_po_2g=2
+noise_cal_dbg.fab.3=1
+noise_cal_high_gain.fab.3=76
+noise_cal_nf_substract_val.fab.3=356
+noise_cal_po_2g.fab.3=4
+

brcm/ZP_BCM4339/bcmdhd.ZP.OOB.cal

@@ -0,0 +1,102 @@
+# Sample NVRAM for BCM94339 WLCSP with eTR,iPA, and eLNA. 
+sromrev=11
+boardrev=0x1100
+boardtype=0x06c9
+boardflags=0x10081401
+boardflags2=0x00000000
+boardflags3=0x08001188
+#boardnum=57410 
+macaddr=00:90:4c:c5:12:38
+ccode=0
+regrev=0
+antswitch=0
+pdgain2g=7
+pdgain5g=7
+tworangetssi2g=0
+tworangetssi5g=0
+vendid=0x14e4
+devid=0x43ae
+manfid=0x2d0
+#prodid=0x052e
+nocrc=1
+otpimagesize=502
+xtalfreq=37400
+extpagain2g=2
+pdetrange2g=2
+extpagain5g=2
+pdetrange5g=2
+rxgains2gelnagaina0=2
+rxgains2gtrisoa0=6
+rxgains2gtrelnabypa0=1
+rxgains5gelnagaina0=4
+rxgains5gtrisoa0=4
+rxgains5gtrelnabypa0=1
+rxchain=1
+txchain=1
+aa2g=1
+aa5g=1
+tssipos5g=0
+tssipos2g=0
+pa2ga0=0xFF47,0x17B5,0xFD2B
+pa2gccka0=0xFF5F,0x1B46,0xFCCC
+pa5ga0=0xff54,0x16ec,0xfd45,0xff52,0x16a1,0xfd4d,0xff46,0x15b7,0xfd5a,0xff56,0x156d,0xfd79
+pa5gbw40a0=0xff59,0x17ca,0xfd30,0xff42,0x163d,0xfd4b,0xff31,0x152e,0xfd55,0xff60,0x16d8,0xfd54
+pa5gbw80a0=0xff56,0x1740,0xfd3f,0xff50,0x1738,0xfd3d,0xff4d,0x16b4,0xfd42,0xff58,0x1634,0xfd60
+# Default Target Power for 2G -- 17dBm(11)/14dBm(54)/13dBm(MCS7)/12dBm(MCS8)/12dBm(MCS9)
+maxp2ga0=74
+maxp5ga0=74,74,74,74
+cckbw202gpo=0x0000
+cckbw20ul2gpo=0x0000
+mcsbw202gpo=0xaa888888
+mcsbw402gpo=0xaa888888
+dot11agofdmhrbw202gpo=0x6666
+ofdmlrbw202gpo=0x0066
+tssifloor2g=500
+# Default Target Power for 5G -- 14dBm(54)/13dBm(MCS7)/12dBm(MCS8)/12dBm(MCS9)
+mcsbw205glpo=0xaa866666
+mcsbw405glpo=0xaa866666
+mcsbw805glpo=0xaa866666
+mcsbw205gmpo=0xaa866666
+mcsbw405gmpo=0xaa866666
+mcsbw805gmpo=0xaa866666
+mcsbw205ghpo=0xaa866666
+mcsbw405ghpo=0xaa866666
+mcsbw805ghpo=0xaa866666
+mcslr5glpo=0x0000
+mcslr5gmpo=0x0000
+mcslr5ghpo=0x0000
+sb20in40hrpo=0x0
+sb20in80and160hr5glpo=0x0
+sb40and80hr5glpo=0x0
+sb20in80and160hr5gmpo=0x0
+sb40and80hr5gmpo=0x0
+sb20in80and160hr5ghpo=0x0
+sb40and80hr5ghpo=0x0
+sb20in40lrpo=0x0
+sb20in80and160lr5glpo=0x0
+sb40and80lr5glpo=0x0
+sb20in80and160lr5gmpo=0x0
+sb40and80lr5gmpo=0x0
+sb20in80and160lr5ghpo=0x0
+sb40and80lr5ghpo=0x0
+dot11agduphrpo=0x0
+dot11agduplrpo=0x0
+phycal_tempdelta=25
+cckdigfilttype=2
+swctrlmap_5g=0x00080008,0x00500010,0x00100008,0x000000,0x078
+swctrlmap_2g=0x00010001,0x00220002,0x00020001,0x042202,0x1ff
+swctrlmapext_5g=0x00000000,0x00000000,0x00000000,0x000000,0x000
+swctrlmapext_2g=0x00000000,0x00000000,0x00000000,0x000000,0x000
+#
+#GPIO 0 for SDIO HW OOB interruption
+muxenab=0x10
+#sd_gpout=0
+#sd_oobonly=1
+#
+rssicorrnorm_c0=-2,0
+rssicorrnorm5g_c0=3,5,2,3,4,2,2,3,1,2,3,1
+## ED threshold level to address the new ETSI requirement - 10/31/2013
+ed_thresh2g=-77
+ed_thresh5g=-77
+#
+paparambwver=1

brcm/ZP_BCM4339/bcmdhd.ZP.SDIO.cal

@@ -0,0 +1,102 @@
+# Sample NVRAM for BCM94339 WLCSP with eTR,iPA, and eLNA. 
+sromrev=11
+boardrev=0x1100
+boardtype=0x06c9
+boardflags=0x10081401
+boardflags2=0x00000000
+boardflags3=0x08001188
+#boardnum=57410 
+macaddr=00:90:4c:c5:12:38
+ccode=0
+regrev=0
+antswitch=0
+pdgain2g=7
+pdgain5g=7
+tworangetssi2g=0
+tworangetssi5g=0
+vendid=0x14e4
+devid=0x43ae
+manfid=0x2d0
+#prodid=0x052e
+nocrc=1
+otpimagesize=502
+xtalfreq=37400
+extpagain2g=2
+pdetrange2g=2
+extpagain5g=2
+pdetrange5g=2
+rxgains2gelnagaina0=2
+rxgains2gtrisoa0=6
+rxgains2gtrelnabypa0=1
+rxgains5gelnagaina0=4
+rxgains5gtrisoa0=4
+rxgains5gtrelnabypa0=1
+rxchain=1
+txchain=1
+aa2g=1
+aa5g=1
+tssipos5g=0
+tssipos2g=0
+pa2ga0=0xFF47,0x17B5,0xFD2B
+pa2gccka0=0xFF5F,0x1B46,0xFCCC
+pa5ga0=0xff54,0x16ec,0xfd45,0xff52,0x16a1,0xfd4d,0xff46,0x15b7,0xfd5a,0xff56,0x156d,0xfd79
+pa5gbw40a0=0xff59,0x17ca,0xfd30,0xff42,0x163d,0xfd4b,0xff31,0x152e,0xfd55,0xff60,0x16d8,0xfd54
+pa5gbw80a0=0xff56,0x1740,0xfd3f,0xff50,0x1738,0xfd3d,0xff4d,0x16b4,0xfd42,0xff58,0x1634,0xfd60
+# Default Target Power for 2G -- 17dBm(11)/14dBm(54)/13dBm(MCS7)/12dBm(MCS8)/12dBm(MCS9)
+maxp2ga0=74
+maxp5ga0=74,74,74,74
+cckbw202gpo=0x0000
+cckbw20ul2gpo=0x0000
+mcsbw202gpo=0xaa888888
+mcsbw402gpo=0xaa888888
+dot11agofdmhrbw202gpo=0x6666
+ofdmlrbw202gpo=0x0066
+tssifloor2g=500
+# Default Target Power for 5G -- 14dBm(54)/13dBm(MCS7)/12dBm(MCS8)/12dBm(MCS9)
+mcsbw205glpo=0xaa866666
+mcsbw405glpo=0xaa866666
+mcsbw805glpo=0xaa866666
+mcsbw205gmpo=0xaa866666
+mcsbw405gmpo=0xaa866666
+mcsbw805gmpo=0xaa866666
+mcsbw205ghpo=0xaa866666
+mcsbw405ghpo=0xaa866666
+mcsbw805ghpo=0xaa866666
+mcslr5glpo=0x0000
+mcslr5gmpo=0x0000
+mcslr5ghpo=0x0000
+sb20in40hrpo=0x0
+sb20in80and160hr5glpo=0x0
+sb40and80hr5glpo=0x0
+sb20in80and160hr5gmpo=0x0
+sb40and80hr5gmpo=0x0
+sb20in80and160hr5ghpo=0x0
+sb40and80hr5ghpo=0x0
+sb20in40lrpo=0x0
+sb20in80and160lr5glpo=0x0
+sb40and80lr5glpo=0x0
+sb20in80and160lr5gmpo=0x0
+sb40and80lr5gmpo=0x0
+sb20in80and160lr5ghpo=0x0
+sb40and80lr5ghpo=0x0
+dot11agduphrpo=0x0
+dot11agduplrpo=0x0
+phycal_tempdelta=25
+cckdigfilttype=2
+swctrlmap_5g=0x00080008,0x00500010,0x00100008,0x000000,0x078
+swctrlmap_2g=0x00010001,0x00220002,0x00020001,0x042202,0x1ff
+swctrlmapext_5g=0x00000000,0x00000000,0x00000000,0x000000,0x000
+swctrlmapext_2g=0x00000000,0x00000000,0x00000000,0x000000,0x000
+#
+#GPIO 0 for SDIO HW OOB interruption
+#muxenab=0x10
+#sd_gpout=0
+#sd_oobonly=1
+#
+rssicorrnorm_c0=-2,0
+rssicorrnorm5g_c0=3,5,2,3,4,2,2,3,1,2,3,1
+## ED threshold level to address the new ETSI requirement - 10/31/2013
+ed_thresh2g=-77
+ed_thresh5g=-77
+#
+paparambwver=1