imx-firmware/nxp/FwImage_8801_SD/ed_mac_ctrl_V1_8801.conf

#       File : ed_mac_ctrl_V1_8801.conf
#
#   ./mlanutl mlan0 hostcmd config/ed_mac_ctrl_V1_8801.conf ed_mac_ctrl
#
#
## Set Energy Detect Threshold for EU Adaptivity test

ed_mac_ctrl={
        CmdCode=0x0124          #Command code, DO NOT change this line
        Enable:2=0x1            # 0       - disable EU adaptivity
                                # 1       - enable EU adaptivity

        Offset:2=0x0e           # 0       - Default Energy Detect threshold
                                #offset value range: 0x80 to 0x7F
}
FwImage: update firmware to mxm5x17283 Firmware: SDIO-UART W8801 Firmware version 14.92.36.p170 SDIO-UART IW416 Firmware version 16.92.21.p11 PCIE-UART W9098 Firmware version 17.92.5.p10 SDIO-UART W8997 Firmware version 16.92.10.p219.4 PCIE-UART W8997 Firmware version 16.92.10.p213.3 SDIO-UART W8987 Firmware version 16.92.21.p11 WLAN Bug Fixes: --------------- 1. PCIE8997: Fixed pre-cert issue where STA is responding to the ARP requests after receiving encrypted M3 and reset PN from AP 2. PCIE8997: Added WFA SVD failure fixes 3. PCIE9098: Fixed pre-cert issue where STA is responding to the ARP requests after receiving encrypted M3 and reset PN from AP 4. PCIE9098: Added WFA SVD failure fixes 5. SD8801: Fixed low TCP RX throughput issue For Linksys 1900AC AP 6. SD8801: Corresponding firmware change for fixing low throughput issue in WPA3-SAE security 7. SD8801: Enabled ED-MAC by default 8. SD8801: Fixed low throughput in Rx A-MSDU 9. SD8801: Fixed low throughput issue in P2P GC 10. SD8801: Added WFA SVD failure fixes 11. SD8987: Added WFA SVD failure fixes 12. SD8987: Minor generic bug fixe 13. SD8987: Fixed RF test mode "Continuous Transmit Test" error happened on the second time test 14. SD8987: Fixed Low TCP-Tx and UDP-Tx throughput issues 15. SD8997: Fixed pre-cert issue where STA is responding to the ARP requests after receiving encrypted M3 and reset PN from AP 16. SD8997: Added WFA SVD failure fixes 17. SDIW416: Added WFA SVD failure fixes 18. SDIW416: Minor generic bug fixes BT Bug Fixes: ------------- 1. SD8987: Minor generic bug fixe 2. SD8987: Fixed FW replying with different reason when the Host has rejected the incoming call 3. SD8987: Fixed Outgoing connection disconnection with reason "Connection terminated by local host" after pairing with reference device 4. SDIW416: Fixed an issue with retransmission window during eSCO connection accept 5. SDIW416: Continuous A2DP-SNK audio glitches issue observed in MMH Rx traffic Yocto build, it requires to copy the files to: - lib/firmware/nxp/ Signed-off-by: Sherry Sun <sherry.sun@nxp.com> 2021-10-09 05:51:45 +00:00			`# File : ed_mac_ctrl_V1_8801.conf`
			`#`
			`# ./mlanutl mlan0 hostcmd config/ed_mac_ctrl_V1_8801.conf ed_mac_ctrl`
			`#`
			`#`
			`## Set Energy Detect Threshold for EU Adaptivity test`

			`ed_mac_ctrl={`
			`CmdCode=0x0124 #Command code, DO NOT change this line`
			`Enable:2=0x1 # 0 - disable EU adaptivity`
			`# 1 - enable EU adaptivity`

FwImage: SD8801: change the ed_mac value for muRata 2DS module 0x0e is the recommend Energy Detect threshold for muRata 2DS module, otherwise the inappropriate ed_mac value may cause 2.4G channel 1 AP/P2P function cannot work when use 2DS along with muRata M.2-usd apater. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> 2022-12-08 02:28:42 +00:00			`Offset:2=0x0e # 0 - Default Energy Detect threshold`
FwImage: update firmware to mxm5x17283 Firmware: SDIO-UART W8801 Firmware version 14.92.36.p170 SDIO-UART IW416 Firmware version 16.92.21.p11 PCIE-UART W9098 Firmware version 17.92.5.p10 SDIO-UART W8997 Firmware version 16.92.10.p219.4 PCIE-UART W8997 Firmware version 16.92.10.p213.3 SDIO-UART W8987 Firmware version 16.92.21.p11 WLAN Bug Fixes: --------------- 1. PCIE8997: Fixed pre-cert issue where STA is responding to the ARP requests after receiving encrypted M3 and reset PN from AP 2. PCIE8997: Added WFA SVD failure fixes 3. PCIE9098: Fixed pre-cert issue where STA is responding to the ARP requests after receiving encrypted M3 and reset PN from AP 4. PCIE9098: Added WFA SVD failure fixes 5. SD8801: Fixed low TCP RX throughput issue For Linksys 1900AC AP 6. SD8801: Corresponding firmware change for fixing low throughput issue in WPA3-SAE security 7. SD8801: Enabled ED-MAC by default 8. SD8801: Fixed low throughput in Rx A-MSDU 9. SD8801: Fixed low throughput issue in P2P GC 10. SD8801: Added WFA SVD failure fixes 11. SD8987: Added WFA SVD failure fixes 12. SD8987: Minor generic bug fixe 13. SD8987: Fixed RF test mode "Continuous Transmit Test" error happened on the second time test 14. SD8987: Fixed Low TCP-Tx and UDP-Tx throughput issues 15. SD8997: Fixed pre-cert issue where STA is responding to the ARP requests after receiving encrypted M3 and reset PN from AP 16. SD8997: Added WFA SVD failure fixes 17. SDIW416: Added WFA SVD failure fixes 18. SDIW416: Minor generic bug fixes BT Bug Fixes: ------------- 1. SD8987: Minor generic bug fixe 2. SD8987: Fixed FW replying with different reason when the Host has rejected the incoming call 3. SD8987: Fixed Outgoing connection disconnection with reason "Connection terminated by local host" after pairing with reference device 4. SDIW416: Fixed an issue with retransmission window during eSCO connection accept 5. SDIW416: Continuous A2DP-SNK audio glitches issue observed in MMH Rx traffic Yocto build, it requires to copy the files to: - lib/firmware/nxp/ Signed-off-by: Sherry Sun <sherry.sun@nxp.com> 2021-10-09 05:51:45 +00:00			`#offset value range: 0x80 to 0x7F`
			`}`