libfprint/libfprint/drivers/aes3500.c

/*
 * AuthenTec AES3500 driver for libfprint
 *
 * AES3500 is a press-typed sensor, which captures image in 128x128
 * pixels.
 *
 * Thanks Rafael Toledo for the Windows driver and the help.
 *
 * This work is derived from Daniel Drake's AES4000 driver.
 *
 * Copyright (C) 2011-2013 Juvenn Woo <machese@gmail.com>
 * Copyright (C) 2007-2008 Daniel Drake <dsd@gentoo.org>
 *
 * This library is free software; you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License as
 * published by the Free Software Foundation; either version 2.1 of the
 * License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
 * 02110-1301 USA
 */

#define FP_COMPONENT "aes3500"

#include "aes3k.h"

#define DATA_BUFLEN 0x2089

/* image size = FRAME_WIDTH x FRAME_WIDTH */
#define FRAME_WIDTH 128
#define FRAME_SIZE (FRAME_WIDTH * AES3K_FRAME_HEIGHT / 2)
#define FRAME_NUMBER (FRAME_WIDTH / AES3K_FRAME_HEIGHT)
#define ENLARGE_FACTOR 2


static struct aes_regwrite init_reqs[] = {
  /* master reset */
  { 0x80, 0x01 },
  { 0, 0 },
  { 0x80, 0x00 },
  { 0, 0 },

  { 0x81, 0x00 },
  { 0x80, 0x00 },
  { 0, 0 },

  /* scan reset */
  { 0x80, 0x02 },
  { 0, 0 },
  { 0x80, 0x00 },
  { 0, 0 },

  /* disable register buffering */
  { 0x80, 0x04 },
  { 0, 0 },
  { 0x80, 0x00 },
  { 0, 0 },

  { 0x81, 0x00 },
  { 0, 0 },
  /* windows driver reads registers now (81 02) */
  { 0x80, 0x00 },
  { 0x81, 0x00 },

  /* set excitation bias current: 2mhz drive ring frequency,
   * 4V drive ring voltage, 16.5mA excitation bias */
  { 0x82, 0x04 },

  /* continuously sample drive ring for finger detection,
   * 62.50ms debounce delay */
  { 0x83, 0x13 },

  { 0x84, 0x07 },       /* set calibration resistance to 12 kiloohms */
  { 0x85, 0x3d },       /* set calibration capacitance */
  { 0x86, 0x03 },       /* detect drive voltage */
  { 0x87, 0x01 },       /* set detection frequency to 125khz */
  { 0x88, 0x02 },       /* set column scan period */
  { 0x89, 0x02 },       /* set measure drive */
  { 0x8a, 0x33 },       /* set measure frequency and sense amplifier bias */
  { 0x8b, 0x33 },       /* set matrix pattern */
  { 0x8c, 0x0f },       /* set demodulation phase 1 */
  { 0x8d, 0x04 },       /* set demodulation phase 2 */
  { 0x8e, 0x23 },       /* set sensor gain */
  { 0x8f, 0x07 },       /* set image parameters */
  { 0x90, 0x00 },       /* carrier offset null */
  { 0x91, 0x1c },       /* set A/D reference high */
  { 0x92, 0x08 },       /* set A/D reference low */
  { 0x93, 0x00 },       /* set start row to 0 */
  { 0x94, 0x07 },       /* set end row */
  { 0x95, 0x00 },       /* set start column to 0 */
  { 0x96, 0x1f },       /* set end column */
  { 0x97, 0x04 },       /* data format and thresholds */
  { 0x98, 0x28 },       /* image data control */
  { 0x99, 0x00 },       /* disable general purpose outputs */
  { 0x9a, 0x0b },       /* set initial scan state */
  { 0x9b, 0x00 },       /* clear challenge word bits */
  { 0x9c, 0x00 },       /* clear challenge word bits */
  { 0x9d, 0x09 },       /* set some challenge word bits */
  { 0x9e, 0x53 },       /* clear challenge word bits */
  { 0x9f, 0x6b },       /* set some challenge word bits */
  { 0, 0 },

  { 0x80, 0x00 },
  { 0x81, 0x00 },
  { 0, 0 },
  { 0x81, 0x04 },
  { 0, 0 },
  { 0x81, 0x00 },
};

struct _FpiDeviceAes3500
{
  FpiDeviceAes3k parent;
};
G_DECLARE_FINAL_TYPE (FpiDeviceAes3500, fpi_device_aes3500, FPI,
                      DEVICE_AES3500, FpiDeviceAes3k);
G_DEFINE_TYPE (FpiDeviceAes3500, fpi_device_aes3500, FPI_TYPE_DEVICE_AES3K);


static const FpIdEntry id_table[] = {
  { .vid = 0x08ff, .pid = 0x5731 },
  { .vid = 0,  .pid = 0,  .driver_data = 0 },
};

static void
fpi_device_aes3500_init (FpiDeviceAes3500 *self)
{
}

static void
fpi_device_aes3500_class_init (FpiDeviceAes3500Class *klass)
{
  FpDeviceClass *dev_class = FP_DEVICE_CLASS (klass);
  FpImageDeviceClass *img_class = FP_IMAGE_DEVICE_CLASS (klass);
  FpiDeviceAes3kClass *aes_class = FPI_DEVICE_AES3K_CLASS (klass);

  dev_class->id = "aes3500";
  dev_class->full_name = "AuthenTec AES3500";
  dev_class->id_table = id_table;

  img_class->img_height = FRAME_WIDTH * ENLARGE_FACTOR;
  img_class->img_width = FRAME_WIDTH * ENLARGE_FACTOR;

  aes_class->data_buflen = DATA_BUFLEN;
  aes_class->frame_width = FRAME_WIDTH;
  aes_class->frame_size = FRAME_SIZE;
  aes_class->frame_number = FRAME_NUMBER;
  aes_class->enlarge_factor = ENLARGE_FACTOR;
  aes_class->init_reqs = init_reqs;
  aes_class->init_reqs_len = G_N_ELEMENTS (init_reqs);
}