Commit graph

90 commits

Author SHA1 Message Date
Marco Trevisan (Treviño)
faade91c39 test-fpi-device: Add function to create fake FpPrint's and galleries 2020-12-09 11:47:33 +01:00
Marco Trevisan (Treviño)
6ca8441df9 umockdev-tests: Don't fail when trying to save other errors 2020-12-09 10:26:58 +01:00
Marco Trevisan (Treviño)
8112da0358 umockdev-tests: Still raise an error when storing the exception output
Otherwise we won't ever fail
2020-12-09 10:26:58 +01:00
Marco Trevisan (Treviño)
b5496fd257 fp-device: Ensure finger status is set to proper type on property getter
Finger status is a flag not an enum.

Add tests.
2020-12-04 12:15:22 +00:00
Marco Trevisan (Treviño)
12b0120a3d test-fpi-device: Always check the return values for the API calls
Ensure that the return value of the API calls match the expected one,
as we need to ensure that it also matches with the error/no-error case.
2020-12-02 16:28:36 +00:00
Benjamin Berg
1b5dd0057f tests: Add device removal test
This tests all relevant scenarios of device removal, i.e.:
 * device is not open
 * device is currently closing
 * device is open and idle
 * device is currently opening
 * device is open and active

The test ensures that in all scenarios the following holds true:
 * device "removed" signal is only emitted after the action completes
 * context "device-removed" signal is only emitted after the device has
   been closed

Note that the "opening" case is special. Here we confirm that a success
from "open" will not be overriden by a FP_DEVICE_ERROR_REMOVED error, in
order to correctly signal that the internal device state is open and it
needs to be closed.
2020-11-23 17:47:03 +01:00
Benjamin Berg
0051ff6352 device: Treat devices as closed even after a close failure
We require the close call, but as the underlying transport layer is
gone, it will generally just return an error.

In principle, it makes sense to think of close as a function that always
succeeds (i.e. it makes no sense to try again). Should the device be in
a bad state, then a subsequent open() will simply fail.
2020-11-23 17:47:03 +01:00
Marco Trevisan (Treviño)
0c56e0de6d synaptics: Report finger status to libfprint
The inactivation in case would be set back by libfprint
2020-11-07 13:23:30 +00:00
Marco Trevisan (Treviño)
893ff9c033 fp-image-device: Report finger status changes to the device
While the image device has its own finger status tracking, we use a simpler
version as public data information, so let's just report the finger-on/off
and when a finger is expected to the parent class.

Verify that this happens as expected using the virtual-image class
2020-11-07 13:23:30 +00:00
Marco Trevisan (Treviño)
42e4506b1b fp-device: Add finger-status property
It can be used by drivers to report the state of the finger on sensor
2020-11-07 13:23:30 +00:00
Benjamin Berg
ae3baadcf9 tests: Add a new test for vfs301
See: #320
2020-11-05 15:55:09 +01:00
Benjamin Berg
4f29a32da8 tests: Store temporary directory on failure
It is not very useful to just delete the data again after a failure, as
it might be useful for debugging. Just store it into an "errors"
subdirectory of the PWD in the hope that this is a sane location.

Note that it'll error out if the directory already exists, but that
should be acceptable in all cases. i.e. it won't exist in the CI and
developers can just wipe the directory.
2020-11-05 15:52:54 +01:00
Benjamin Berg
b03f9a502a tests: Remove old README-umockdev file
It has been superseeded by README.md.
2020-10-14 12:39:10 +02:00
Benjamin Berg
62edf93958 tests: Add AES3500 test case
Thanks for Federico Cupellini for providing test samples.
2020-09-29 10:35:48 +02:00
boger.wang
3962372f47 tests: add identify test for driver goodixmoc
add identify ioctl file, modify custom.py add identify test
2020-09-14 09:55:55 +00:00
boger.wang
c85f385191 tests: add test for goodixmoc driver 2020-09-01 16:39:06 +08:00
Benjamin Berg
390611d5c9 tests: Improve the instructions to create new umockdev captures
Thanks to Evgeny for much of the work and suggestions from Boger Wang.

Co-authored-by: Evgeny Gagauz <evgenij.gagauz@gmail.com>
2020-06-05 15:03:38 +00:00
Benjamin Berg
685052c605 tests: Add test for vfs0050 driver
This test is based on data captured by Evgeny.

Co-authored-by: Evgeny Gagauz <evgenij.gagauz@gmail.com>
2020-06-05 15:03:38 +00:00
Benjamin Berg
4f0b0fa526 tests: Ensure FpDevice checks enrolled prints for completeness
Enrolled prints need to have their type set. FpDevice should ensure that
is the case when a driver returns a print back.
2020-06-05 14:48:57 +00:00
Benjamin Berg
7f58556011 tests: An enrolled print needs to have a type set 2020-06-05 14:48:57 +00:00
Benjamin Berg
e4f9935706 Uncrustify with newer version 2020-06-02 11:56:19 +00:00
Benjamin Berg
a464f602ca nbis: Apply patch to fix scan-build warnings
Apply the newly added patch to the checkout.
2020-05-07 14:22:02 +00:00
Benjamin Berg
422fc5facf tests: Add unused annotation
The variables exist for memory management but are unused otherwise. Tag
them as such.
2020-05-07 14:22:02 +00:00
Benjamin Berg
6d542edf8a test: Remove unused initialisers
Make the static analysis happy.
2020-05-07 14:22:02 +00:00
Benjamin Berg
8d4d56b1f1 tests: Annotate a few variables as unused
These solely exist for memory management, but the static analysis
complains.
2020-05-07 14:22:02 +00:00
Marco Trevisan (Treviño)
41e05b1133 test-fpi-device: Don't compare error pointers that have been cleared
During verify/identify complete we replace the error pointer that the driver
returned with another error we created, after clearing that one.

However, when we initialize a new error the compiler may reuse the same
allocation of the cleared one, and this might lead to a test failure.

So, don't be so fragile and ignore the pointer check
2020-04-15 14:19:53 +02:00
Bastien Nocera
d0751ae06b tests/elan: Fix typos 2020-04-14 13:51:02 +02:00
Marco Trevisan (Treviño)
e7ff4f705c tests: Import FPrint only during execution not when parsing
The unittest_parser script would try to import FPrint gi module, but it
would fail as per the fact that none is installed yet, so make sure that
we don't load any FPrint module until we try to actually run the tests
2020-03-27 21:19:09 +00:00
Benjamin Berg
f4ec816a6b tests: Cast to correct pointer type rather than gpointer
This is just a small cleanup
2020-02-19 16:42:30 +01:00
Benjamin Berg
9e2a7235e3 tests: Fix reading of gboolean into pointer
Otherwise the payload will be lost later on when using GPOINTER_TO_INT
to cast it back.

See: #236
2020-02-19 16:42:30 +01:00
Marco Trevisan (Treviño)
0bb8ad1313 tests: Make meson be aware of the single python unit tests
Scan for the unit tests in virtual-image suite and handle them individually
2020-02-10 11:41:40 +01:00
Marco Trevisan (Treviño)
6eb06697e9 tests/virtual-image: Use introspection names for errors 2020-02-10 11:41:40 +01:00
Marco Trevisan (Treviño)
355cae1bbd fp-device: Return error if trying to list a storage-less device
Devices with no storage don't allow listing prints, and if we try to do
that, we'd end up in trying to call a NULL function pointer, causing a crash

So always check if the device has storage before calling the list vfunc, and
if we fail, return an error.

Include an unit-test to verify this situation
2020-02-10 11:41:40 +01:00
Marco Trevisan (Treviño)
82ba69b1df meson: Depends on gusb 0.2.0, but only enable tests on 0.3.0 2020-02-10 11:41:40 +01:00
Benjamin Berg
5ac770c614 tests: Return skip error if import fails
Rather than backtracing, just print the exception and return a skip
error if the import fails.
2020-02-10 11:41:40 +01:00
Marco Trevisan (Treviño)
cfbd5d27b7 comapt: Add FpDeviceClass compatibility autoptr and use it 2020-02-10 11:41:37 +01:00
Benjamin Berg
169ca1ba77 compat: Add compatibility defines for older GLib
We are already using a number of defines and autoptrs from newer GLib
releases. Add the appropriate compatibility defines rather than removing
the corresponding code.

Closes: #222
2020-02-10 11:40:40 +01:00
Benjamin Berg
b9e546f05b tests: Add missing NULL terminator to g_object_new
The g_object_new call had a NULL argument for a property. This meant
that the compiler could not warn about the lack of NULL termination for
the argument list.

Add the missing NULL termination.
2020-01-20 13:34:31 +01:00
Marco Trevisan (Treviño)
05df5e2822 test-fpi-device: Verify driver enroll errors 2020-01-17 19:44:52 +01:00
Marco Trevisan (Treviño)
58a9214610 test-fpi-device: Add tests for verify/identify warnings 2020-01-17 19:44:52 +01:00
Marco Trevisan (Treviño)
a87e9c546f test-fpi-device: Verify device action error operations 2020-01-17 19:44:52 +01:00
Marco Trevisan (Treviño)
ad514c3775 test-fpi-device: Fix file description 2020-01-17 19:44:52 +01:00
Marco Trevisan (Treviño)
3c5b7f8ea6 test-fpi-device: Add more probe tests with errors 2020-01-17 19:44:52 +01:00
Marco Trevisan (Treviño)
b09df0e40a test-fpi-device: Add tests for error message creation 2020-01-17 19:44:50 +01:00
Marco Trevisan (Treviño)
027ac8d843 fpi-device: Only mark a device as closed if the operation succeeded
We may fail during the close phase, in such case the device should not be
marked as closed.
2020-01-17 19:03:33 +01:00
Marco Trevisan (Treviño)
b3a4c2cf9a fpi-device: Improve logging and testing on report/complete 2020-01-17 19:03:33 +01:00
Marco Trevisan (Treviño)
9f3272f296 test-fpi-device: Use smart pointer to handle CB data 2020-01-17 18:43:01 +01:00
Marco Trevisan (Treviño)
0889ec20a8 fp-device: Remove confusing success parameter on FpMatchCb
This was added as alias to the error check, but given we're passing to the
callback both the error and the match itself, we can just avoid adding an
extra parameter that could be confusing (as may imply that the matching
happened).

Also clarify the documentation and ensure that the match value is properly
set in tests.
2020-01-16 20:24:42 +01:00
Benjamin Berg
29a13a9b4a tests: Add error reporting tests based on virtual driver
We were not testing the image device error reporting functions yet
inside libfprint (fprintd already had such tests). Add tests to make
sure we catch errors earlier.
2020-01-13 17:58:41 +01:00
Benjamin Berg
7aaeec3d6a tests: Check that missing identify/verify result returns error 2020-01-13 14:37:39 +01:00