Commit graph

1207 commits

Author SHA1 Message Date
Marco Trevisan (Treviño)
3b993fabb6 verify/enroll: Save and use locally saved prints also for devices with storage
Some devices have storage but that's is limited enough not to be able
to store all the metadata, but just a fingerprint id.

In such case we also need to use the local storage to be able to verify.
Fprintd does this already, but we don't do it in the libfprint examples.

So, in in case we enroll, always save the print information to the disk,
while in case we verify we try to load the print from disk and we use
that in case its private data matches the one provided by the device.
2020-11-08 22:19:23 +01:00
Marco Trevisan (Treviño)
0c56e0de6d synaptics: Report finger status to libfprint
The inactivation in case would be set back by libfprint
2020-11-07 13:23:30 +00:00
Marco Trevisan (Treviño)
893ff9c033 fp-image-device: Report finger status changes to the device
While the image device has its own finger status tracking, we use a simpler
version as public data information, so let's just report the finger-on/off
and when a finger is expected to the parent class.

Verify that this happens as expected using the virtual-image class
2020-11-07 13:23:30 +00:00
Marco Trevisan (Treviño)
3c382cac7f fp-device: Reset the finger status on complete
Devices should handle the finger status internally, but if they don't do it
we need to handle it on actions completion
2020-11-07 13:23:30 +00:00
Marco Trevisan (Treviño)
42e4506b1b fp-device: Add finger-status property
It can be used by drivers to report the state of the finger on sensor
2020-11-07 13:23:30 +00:00
Benjamin Berg
ae3baadcf9 tests: Add a new test for vfs301
See: #320
2020-11-05 15:55:09 +01:00
Benjamin Berg
4f29a32da8 tests: Store temporary directory on failure
It is not very useful to just delete the data again after a failure, as
it might be useful for debugging. Just store it into an "errors"
subdirectory of the PWD in the hope that this is a sane location.

Note that it'll error out if the directory already exists, but that
should be acceptable in all cases. i.e. it won't exist in the CI and
developers can just wipe the directory.
2020-11-05 15:52:54 +01:00
Benjamin Berg
e5fa54e8e7 vfs301: Start capture only on state change to AWAIT_FINGER_ON
Start the capture when the state changes to AWAIT_FINGER_ON instead of
assuming that the device should always be active.

Closes: #320
2020-11-04 14:13:00 +01:00
Benjamin Berg
d3076039d0 vfs301: Fix device pointer handling in callback
When porting the driver to the new libfprint 1.90.0 a mistake was made
where the device was not passed through user_data anymore but it was
still read from there. Stop using user_data in the callback to fix this.

See: #320
2020-11-04 14:13:00 +01:00
Benjamin Berg
a748f4d30f elan: Simplify elan driver internal state machine
The elan driver always "deactivates" the device after a cpature run. We
can simplify the while internal state into a single "active" state and
rely on the image device driving this state machine correctly.

i.e.:
 * We start a callibrate/capture/deactivate when we go into the
   AWAIT_FINGER_ON state
 * We only store the fact that we are active and want to deactivate
 * We rely on the image device never going into the AWAIT_FINGER_ON
   state without first waiting for the finger to be off (which implies
   deactivation).
2020-11-04 14:13:00 +01:00
Benjamin Berg
3ee5536a13 image-device: Redefine internal states and valid transitions
This adds a number of new internal states to better capture what is
going on. Also added are checks that all transitions we make are in the
set of expected and valid transitions.

Only three drivers use the state_change notification. These drivers are
updated accordingly.
2020-11-04 14:13:00 +01:00
Benjamin Berg
f56aacc7ef image-device: Remove cancelling boolean from private data
The boolean is just used to emit a warning for unexpected state
transitions. It is sufficient to pass it to the deactivate function
directly for that purpose.
2020-11-04 14:13:00 +01:00
Benjamin Berg
96fa0a96eb uru4000: Fix missing reference to image transfer
We might redo image transfers, but we only ever had one reference that
was implicitly removed after the transfer completed. Add a new reference
each time it is submitted and only free the last reference in the stop
handler.
2020-10-19 17:41:26 +02:00
Benjamin Berg
1754bd0204 synaptics: Always submit interrupt transfer without a timeout
For some reason we re-submitted the interrupt transfer with a timeout of
1s while the original submission was without a timeout. This looks like
typo, remove the timeout.
2020-10-19 17:14:24 +02:00
Benjamin Berg
90a1abf2f8 synaptics: Fix missing reference to interrupt transfer
When resubmitting the interrupt transfer we need to add a new reference
as the submit function will steal it again.
2020-10-19 17:13:58 +02:00
Benjamin Berg
59824d2122 synaptics: Remove useless code
There is never a fall through if error is not NULL.
2020-10-19 16:59:07 +02:00
Vincent Huang
31319d9c6f synaptics: add support to pid 0xF9, 0xFC, 0xC2 2020-10-15 12:25:34 +08:00
Vincent Huang
e27b65c930 synaptics: add identify function 2020-10-14 18:48:09 +08:00
Benjamin Berg
b03f9a502a tests: Remove old README-umockdev file
It has been superseeded by README.md.
2020-10-14 12:39:10 +02:00
Benjamin Berg
44ef20d5ac aesx660: Use convenience API to allocate USB receive buffer
This also fixes a memory leak of the data as the g_free was missing and
none of the callback handlers free the data either.
2020-10-07 13:38:59 +02:00
Benjamin Berg
4719b30f16 aes1610: Use convenience API to allocate USB receive buffer 2020-10-07 13:38:59 +02:00
Benjamin Berg
7eb361087a drivers: Add access annotations to USB helpers
Mostly for completeness sake, doing this did not find any errors (but
might catch some issues with fixed buffer lengths).
2020-10-07 13:38:59 +02:00
Benjamin Berg
33d50e4e30 usb: Annotate access to USB buffers
Annotate the USB transfer creation functions with the correct buffer
access attribute. Note that we only annotate them as read_only as the
functions may be used for sending and receiving.

Hopefully this will catch buffer overflows in drivers in the future.
2020-10-07 13:22:18 +02:00
Benjamin Berg
994690cfa3 virtual-image: Only read socket when active
Doing this avoids race conditions in testing code where the code might
try to submit errors/images before the device has been activated. This
would then (sometimes) trigger assertions in the image driver code.
2020-10-07 09:44:49 +00:00
Benjamin Berg
52b2d10887 image-device: Delay task completion until device is deactivated
The earlier image device code tried to hide deactivation from the
surrounding library. However, this does not make any sense anymore with
the early reporting feature present.

This changes the operation to complete only once the device is
deactivated. Also changed that in most cases (except for cancellation)
we wait for the finger to be removed before deactivating the device.
2020-10-07 09:44:49 +00:00
Benjamin Berg
81e0f4dfe5 aes3k: Re-send some commands for each capture
The driver seems to have relied on the device to be fully
deactivated and activated again for each capture. This is not the case
during enroll, and as such in can cause issues.

Try fixing this by splitting out the last few commands send to the
device and assuming that this starts the capture.

Fixes: #306
2020-10-07 11:34:12 +02:00
Benjamin Berg
c7cab77fc1 usb-transfer: Work around libgusb cancellation issue
We have plenty of code paths where a transfer may be cancelled before it
is submitted. Unfortunately, libgusb up to and including version 0.3.6
are not handling that case correctly (due to libusb ignoring
cancellation on transfers that are not yet submitted).

Work around this, but do so in a somewhat lazy fashion that is not
entirely race free.

Closes: #306
2020-10-01 00:19:35 +02:00
Benjamin Berg
a63dcc96d5 virtual_image: Open a window for race conditions during open/close
Delay the open/close callbacks by 100ms so that we have a window of
opportunity for race conditions. This is needed to test certain
conditiosn in fprintd.
2020-09-29 12:02:19 +00:00
Benjamin Berg
fab349f356 Remove trailing \n where they are not necessary
Adding a trailing \n to g_message, g_debug, g_warning and g_error is not
neccessary, as a newline will be added automatically by the logging
infrastructure.
2020-09-29 10:42:03 +02:00
Benjamin Berg
62edf93958 tests: Add AES3500 test case
Thanks for Federico Cupellini for providing test samples.
2020-09-29 10:35:48 +02:00
Benjamin Berg
8c4ff253cb aes3k: Fix transfer error path and cancellable lifetime
The cancellable needs to be free'ed at deactivation. Also free it if we
run into a fatal error, which then in turn indicates that the device is
deactivated already.
2020-09-29 10:35:25 +02:00
Benjamin Berg
3ce6a15547 image-device: Don't deactivate if deactivation was already started
The test only prevent deactivation after it completed. Also guard
against trying to deactivate a second time.
2020-09-28 19:12:28 +02:00
Benjamin Berg
174aa2c091 Release 1.90.3 2020-09-14 14:23:45 +02:00
Benjamin Berg
9efe25b91c ci: Disable flatpak building for forks
Also move to use a single rules set for flatpak rather than only/except
rules.
2020-09-14 14:17:25 +02:00
Benjamin Berg
bcce8876e2 aes3k: Fix cancellation logic of aes3k driver
The change_state function is called synchronously from the
image_captured callback. This means that deactivation of the device
happens during the img_cb function, causing the USB transfer to be
re-registered even though the device is already deactivating.

There are various ways to fix this, but it makes sense to directly bind
the cancellation to the deactivation. So create a cancellable that we
cancel at deactivation time, and make sure we always deactivate by going
through cancellation.

closes: #306
2020-09-14 11:23:38 +00:00
boger.wang
3962372f47 tests: add identify test for driver goodixmoc
add identify ioctl file, modify custom.py add identify test
2020-09-14 09:55:55 +00:00
boger.wang
f67f61c638 goodixmoc: Add identify function
this device support verify and identify both, actually call the same
interface.
2020-09-14 09:55:55 +00:00
boger.wang
d5f7f4dfaa goodixmoc: Prevent incorrect firmware type running
only firmware type:APP can function well, if device flash in a factory
or test firmware, report a error tips user update firmware by fwupd
2020-09-14 09:55:55 +00:00
Benjamin Berg
ce6961d165 image-device: Fix cancellation documentation
Image devices are simply deactivated suddenly. As such, the cancellation
logic of FpDevice is not really useful there, but the documentation was
apparently accidentally copied unmodified.
2020-09-07 12:12:34 +02:00
Benjamin Berg
30e1a68344 ci: Build flatpak using GNOME runner and template 2020-09-03 09:42:28 +02:00
Benjamin Berg
5b087ed848 demo: Switch to use GNOME 3.36 runtime 2020-09-03 09:41:11 +02:00
Benjamin Berg
5d0481b031 context: Lower severity of warning if USB fails to initialise
This is unlikely to happen in a real world scenario and currently breaks
running the CI test (not the umockdev based ones) while building the
flatpak. Lower the severity to avoid aborting because there is a
warning.
2020-09-03 09:41:11 +02:00
Benjamin Berg
596d22a449 context: Fix invalid accesses to GUsbContext if USB is missing
When USB cannot be initialised (inside the flatpak build environment),
then we would have invalid accesses to the NULL pointer. Fix those.
2020-09-03 09:41:11 +02:00
boger.wang
c85f385191 tests: add test for goodixmoc driver 2020-09-01 16:39:06 +08:00
boger.wang
eb2aaaaa20 drivers: add goodix moc sensor driver support 2020-09-01 16:39:06 +08:00
boger.wang
e3c009c5b3 fp-device: add new type FpDeviceError FP_DEVICE_ERROR_DATA_DUPLICATE 2020-09-01 16:39:06 +08:00
Vincent Huang
a4f7293f32 synaptics: retry get version command once when receiving non-success
status
2020-08-21 17:42:00 +08:00
Vincent Huang
8b64312f4b synaptics: support sensors pid 0xe9 & 0xdf 2020-07-31 09:47:35 +08:00
Marco Trevisan (Treviño)
b7e27bfdc6 demo: Handle the non-imaging mode also if we get a non-supported error
Image devices may return a FP_DEVICE_ERROR_NOT_SUPPORTED error once capture
is already started, in such case handle the error going in non imaging mode
2020-06-17 14:16:34 +02:00
Marco Trevisan (Treviño)
37b19674f1 verify: Use fast matching callback also for non-storage devices 2020-06-17 14:14:50 +02:00