As the driver is not a normal image device, we need to add a custom
script to test it. Note that the ioctl dump must also be manually
modified unfortunately as the state is tracked incorrectly for the
device by umockdev-record.
This changes the cancellation logic a bit to ensure we always deactivate
the device (equivalent to the AWAIT_OFF state in the driver). All
commands except for the deactivation command should be cancelled when an
operation is stopped, this is to ensure that the LED is turned off at
the end of an operation.
This allows us to properly extract metadata for prints that are stored
on the device. We could for example delete the oldest prints first with
this information.
Heavily modified by Benjamin Berg <bberg@redhat.com> to port it to the
new libfprint API and adjust the coding style to follow more closely
other drivers.
When the device is deactivated while it is still active then the exit SM
needs to be executed from the SM that was active at the time. This is
signalled by is_active being set to FALSE while the active SM completes.
Call m_exit_start in those cases to ensure proper device deactivation.
This driver has a rather odd state machine and also used to mess iwth
the internal state of the image device. This code has been removed, but
is untested unfortunately due to a lack of hardware.
Most likely, this driver is not quite functional currently.
If a USB transfer is started but not completed in one go, the wdata we
pass to continue_write_regv() will already be freed by the time we try
to use it again.
Only free() the wdata on error, or when the USB transfer is completed.
Closes: #180
The state was always AWAIT_FINGER and it was never used by any driver
(except for error checking). So remove it, in particular as a correct
state change will be done after activation anyway.
The only driver with code that actually did anything based on this was
the URU4000 driver. However, all it did was an explicit state change
execution. This is not necessary, as the state_change handler is called
anyway (i.e. we now only write the AWAIT_FINGER register once rather
than twice).
Manual changes plus:
@ init @
identifier driver_name;
identifier activate_func;
@@
struct fp_img_driver driver_name = {
...,
.activate = activate_func,
...,
};
@ remove_arg @
identifier dev;
identifier state;
identifier init.activate_func;
@@
activate_func (
struct fp_img_dev *dev
- , enum fp_imgdev_state state
)
{
<...
- if (state != IMGDEV_STATE_AWAIT_FINGER_ON) { ... }
...>
}
The driver was never ported to the new asynchronous model, meaning it
has been defunct since some time in 2008. Remove the driver, as
seemingly no one has complained about this and we have no proper way to
even verify a port is correct.
If users put their finger on the sensor between the bulge and
"un-bulge" area first and then swipe, the captured image would
be bad.
Skipping more frames can reduce the impact, so bump
ELAN_SKIP_LAST_FRAMES to 2.
Check for the mean calibration being outside of range to know whether we
require a recalibration. Continue with the usual checks if the
calibration value is within range.
The dimensions some sensors return is the maximum zero-based index
rather than the number of pixels. Assuming every sensor has an
even number of pixels is safe.
This commit fixes a hang in gnome-settings when trying to enroll a finger.
The same issue could be seen in the enroll example. Previously the enroll
example would hang on "deactivating" because at some point dev->is_active
is set to false and m_exit_start is never called.
Work-around SELinux AVC warnings caused by p11-kit (which is an NSS
dependency) trying to load the root user's p11-kit configs. We disable
this feature using the P11_KIT_NO_USER_CONFIG envvar.
See https://bugzilla.redhat.com/show_bug.cgi?id=1688583
‘img->key_number’ variable is originally from the device through bulk
endpoint of USB. The variable is immediately assigned to ‘buf[0]’ for
sending to control endpoint of the device. Here, integer overflow may
occur when the ‘img->key_number’ attempts to assign a value that is
outside of type range of ‘char’ to the ‘buf[0]’
libfprint/drivers/elan.c:351:4: warning: 2nd function call argument is an uninitialized value
dbg_buf(elandev->last_read, transfer->actual_length);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/drivers/elan.c:46:5: note: expanded from macro 'dbg_buf'
fp_dbg("%02x", buf[0]); \
^~~~~~~~~~~~~~~~~~~~~~
../../../../../../Projects/jhbuild/libfprint/libfprint/fpi-log.h:52:16: note: expanded from macro 'fp_dbg'
#define fp_dbg g_debug
^
libfprint/drivers/elan.c:351:4: warning: The left operand of '<<' is a garbage value
dbg_buf(elandev->last_read, transfer->actual_length);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/drivers/elan.c:48:27: note: expanded from macro 'dbg_buf'
fp_dbg("%04x", buf[0] << 8 | buf[1]); \
~~~~~~ ^
libfprint/drivers/elan.c:351:4: warning: The left operand of '<<' is a garbage value
dbg_buf(elandev->last_read, transfer->actual_length);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/drivers/elan.c:50:41: note: expanded from macro 'dbg_buf'
fp_dbg("%04x... (%d bytes)", buf[0] << 8 | buf[1], len)
~~~~~~ ^
