libfprint already uses G_DEBUG_HERE in a lot of places which requires
GLib 2.50. Also add the appropriate defines so that usage of newer API
will result in warnings.
The upekts driver needs upek_proto.c while the upektc driver does not.
Move the corresponding source file entries so that both drivers compile
standalone.
The only API user currently seems to be the examples. fprintd has its
own storage and that will be a good idea in general.
So deprecate the API, we'll need to find a different solution for the
examples eventually.
The function was committed by accident as part of commit d18e1053
(lib: Add a way to name timeouts). It is not used anywhere and
fpi_timeout_cancel_all_for_dev exists, is exported and used and serves
the same purpose.
If users put their finger on the sensor between the bulge and
"un-bulge" area first and then swipe, the captured image would
be bad.
Skipping more frames can reduce the impact, so bump
ELAN_SKIP_LAST_FRAMES to 2.
Check for the mean calibration being outside of range to know whether we
require a recalibration. Continue with the usual checks if the
calibration value is within range.
The dimensions some sensors return is the maximum zero-based index
rather than the number of pixels. Assuming every sensor has an
even number of pixels is safe.
The call to sleep(1) inside of the enrollment loop caused a crash
on at least the etes603 driver.
Because in fp_enroll_finger_img the function enters an event
handling loop. This loop needs to start before the next libusb
event timeout. Which would not happen in the etes603 driver
because the timeout there was set to 1 second as well.
This commit fixes a hang in gnome-settings when trying to enroll a finger.
The same issue could be seen in the enroll example. Previously the enroll
example would hang on "deactivating" because at some point dev->is_active
is set to false and m_exit_start is never called.
Work-around SELinux AVC warnings caused by p11-kit (which is an NSS
dependency) trying to load the root user's p11-kit configs. We disable
this feature using the P11_KIT_NO_USER_CONFIG envvar.
See https://bugzilla.redhat.com/show_bug.cgi?id=1688583
‘img->key_number’ variable is originally from the device through bulk
endpoint of USB. The variable is immediately assigned to ‘buf[0]’ for
sending to control endpoint of the device. Here, integer overflow may
occur when the ‘img->key_number’ attempts to assign a value that is
outside of type range of ‘char’ to the ‘buf[0]’
Remove the sanity check added in commit b1afa9d, having a poll setup
isn't necessary to use timeouts, as long as only sync functions are
used.
Closes: #139
This will allow us to segragate helper functions that we want to use
within NBIS. The first helper will be a macro checking for overflow in
multiplications.
Free the maps if we're not returning them.
libfprint/nbis/mindtct/maps.c:176:14: warning: Potential leak of memory pointed to by 'direction_map'
return(ret);
^~~
libfprint/nbis/mindtct/maps.c:195:14: warning: Potential leak of memory pointed to by 'low_contrast_map'
return(ret);
^~~
libfprint/nbis/mindtct/maps.c:195:14: warning: Potential leak of memory pointed to by 'low_flow_map'
return(ret);
^~~
libfprint/nbis/bozorth3/bozorth3.c:704:1: warning: Value stored to 'kx' is never read
kx = 0;
^ ~
libfprint/nbis/bozorth3/bozorth3.c:820:4: warning: Value stored to 'l' is never read
l = 1;
^ ~
The first contour wasn't freed if we failed on the second contour.
libfprint/nbis/mindtct/contour.c:521:14: warning: Potential leak of memory pointed to by 'half1_ex'
return(ret);
^~~
libfprint/nbis/mindtct/contour.c:521:14: warning: Potential leak of memory pointed to by 'half1_ey'
return(ret);
^~~
libfprint/nbis/mindtct/contour.c:521:14: warning: Potential leak of memory pointed to by 'half1_x'
return(ret);
^~~
libfprint/nbis/mindtct/contour.c:521:14: warning: Potential leak of memory pointed to by 'half1_y'
return(ret);
^~~
libfprint/drivers/elan.c:351:4: warning: 2nd function call argument is an uninitialized value
dbg_buf(elandev->last_read, transfer->actual_length);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/drivers/elan.c:46:5: note: expanded from macro 'dbg_buf'
fp_dbg("%02x", buf[0]); \
^~~~~~~~~~~~~~~~~~~~~~
../../../../../../Projects/jhbuild/libfprint/libfprint/fpi-log.h:52:16: note: expanded from macro 'fp_dbg'
#define fp_dbg g_debug
^
libfprint/drivers/elan.c:351:4: warning: The left operand of '<<' is a garbage value
dbg_buf(elandev->last_read, transfer->actual_length);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/drivers/elan.c:48:27: note: expanded from macro 'dbg_buf'
fp_dbg("%04x", buf[0] << 8 | buf[1]); \
~~~~~~ ^
libfprint/drivers/elan.c:351:4: warning: The left operand of '<<' is a garbage value
dbg_buf(elandev->last_read, transfer->actual_length);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libfprint/drivers/elan.c:50:41: note: expanded from macro 'dbg_buf'
fp_dbg("%04x... (%d bytes)", buf[0] << 8 | buf[1], len)
~~~~~~ ^
By asserting if we have a zero line width.
libfprint/drivers/upeksonly.c:118:7: warning: Division by zero
mean /= (ctx->line_width / 2);
~~~~~^~~~~~~~~~~~~~~~~~~~~~~~
We don't need to assign urudev if we only want the size of one of its
members.
libfprint/drivers/uru4000.c:554:20: warning: Value stored to 'urudev' during its initialization is never read
struct uru4k_dev *urudev = FP_INSTANCE_DATA(FP_DEV(dev));
^~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
