While meson suggests to always use 'library' this leads to some unwanted
behaviors when it comes to generate pkg-config files for it, as they
will include `Libs.Private` / `Required.private` fields that should not
be really part of a shared library as libfprint is meant to be used.
There are two variants one with storage and identify support and the
other without storage.
It implements the following commands:
* INSERT id
* REMOVE id
* SCAN id
* ERROR error-code
* LIST (returns saved print)
The INSERT/REMOVE/LIST commands are only available in the storage
driver. The SCAN command emulates presenting a finger.
These commands can be send ahead of time, and will be queued and
processed when appropriate. i.e. for INSERT/REMOVE that is immediately
when possible, for SCAN/ERROR processing is delayed.
The LIST command is always processed immediately.
Note that only a single command can be send per socket connection and
the command must be send in a single message. The socket will be closed
after the command has been processed.
Co-authored-by: Bastien Nocera <hadess@hadess.net>
Co-authored-by: Marco Trevisan (Treviño) <mail@3v1n0.net>
Instead of repeating the same code in both the virtual-image and the
virtual-device drivers, implement a class to handle the socket listening
an data reading.
Co-authored-by: Marco Trevisan (Treviño) <mail@3v1n0.net>
This solves various problems:
1. It stays the same also if some drivers have been disabled
2. It uses a stable path for being imported by systemd
3. It is still checked for its validity by tests
4. It can be auto-generated using a simple command
The change to print a warning (for testing purposes) from commit
944e0d0383 (udev-rules: Print warning if an ID is supported) was
incorrect because it prevented duplicated to be suppressed if a device
is listed by two independent drivers.
As we are shipping a hwdb file now, we cannot have a collision with the
old libfprint version. Also, we are going to pull these rules into
systemd and they will not be installed via libfprint in the future. As
such, collisions will not happen again and it makes more sense like this
for systemd.
We want systemd to pull our hwdb. In order to ease this, always build
the hwdb file, even if it is disabled.
Once systemd has merged the rules, downstream should turn off the rules
in libfprint. The default in libfprint will also be changed to not build
the hwdb (udev_rules option) eventually.
We only use the rules/hwdb to enable auto-suspend. So, instead of
shipping our own rules, we can just use the existing autosuspend rules
and ship a hwdb that sets the appropriate flag.
Closes: #336
there is no specific API for report finger status,
finger needed status is set when captrue sample cmd send, once cmd receive correct,
finger is pressing on sensor.
Found by coverity. While quite bad in theory, proper safeguards are in
place, so it will only result in a g_return_val_if_fail to be hit rather
than causing more severe side effects.
We used to return early in the case where the print matched in order to
report the result more quickly. However, with the early reporting
mechanism and the fprintd side implementation of it, this is not
necessary anymore.
As such, only stop the "verify" and "identify" operations when the
finger is removed (or the operation is cancelled, which is actually what
will happen currently).
It is easier (and more correct) to create a new print from the reported
data and match that against the prints in the gallery.
We continue to return NULL during verify as we cannot provide any
additional information in that case.
NBIS just does weird things and while the array-parameter warning is
easy to fix, the other is not trivial. So disable these warnings so that
we can still build using newer GCC versions.
This function was always documented to return a sunk reference, but it
did not do so. This change is technically backward incompatible.
However, it only has an effect if anything is doing a g_object_ref_sink.
Which may happen inside libfprint itself. With the change, most API
users (including fprintd) are fixed to do refcounting correctly. Any API
user which worked around this will have a memory leak now.
That is not ideal, but it is not really that bad overall. And returning
a floating reference for FpPrint creation was a bad idea in the first
place. And it really only makes sense for fp_print_new as the only
(public) use case is to create the template for enrollment.
When serializing an image print in big endian machine we ended up
swapping the arrays contents two times, first when adding the values and
eventually when calling g_variant_byteswap which already handles this
properly.
With this, we get the test passing into s390x.
Fixes: #236
Identify function is supposed to propagate a boolean value, but we make
it return an integer instead on idle, this can be normally the same in
most of architectures, but not in BE ones.
So, make it return the proper type.
Fixes test failures in s390x.
Related to #236
In general, we rely on the underlying transport layer to throw errors
which will abort the current operation. This does not work for the
virtual image device though, but we need it there for testing purposes.
Add a notify::removed handler that makes things work as expected. Let it
throw a protocol error which should not be visible to the outside.
We require the close call, but as the underlying transport layer is
gone, it will generally just return an error.
In principle, it makes sense to think of close as a function that always
succeeds (i.e. it makes no sense to try again). Should the device be in
a bad state, then a subsequent open() will simply fail.
This enhances the device removal to create a well defined behaviour.
Primarily, it means that:
* "device-removed" will only be called for closed devices
* "removed" will be called only when no operation is active
Note that all actions will fail with FP_DEVICE_ERROR_REMOVED, *except*
for open which will only return this error if it failed.
Resolves: #330
When a new connection came in we would close the old connection. This in
turn would trigger a receive error causing the *new* connection to be
closed from the error handler.
Fix this by simply cancelling any pending transfers when a new
connection comes in. Also change the error handling code to catch issues
like partial writes correctly.
This fixes an issue for the fprintd test where some tests were flaky.
While the image device has its own finger status tracking, we use a simpler
version as public data information, so let's just report the finger-on/off
and when a finger is expected to the parent class.
Verify that this happens as expected using the virtual-image class
When porting the driver to the new libfprint 1.90.0 a mistake was made
where the device was not passed through user_data anymore but it was
still read from there. Stop using user_data in the callback to fix this.
See: #320
The elan driver always "deactivates" the device after a cpature run. We
can simplify the while internal state into a single "active" state and
rely on the image device driving this state machine correctly.
i.e.:
* We start a callibrate/capture/deactivate when we go into the
AWAIT_FINGER_ON state
* We only store the fact that we are active and want to deactivate
* We rely on the image device never going into the AWAIT_FINGER_ON
state without first waiting for the finger to be off (which implies
deactivation).
This adds a number of new internal states to better capture what is
going on. Also added are checks that all transitions we make are in the
set of expected and valid transitions.
Only three drivers use the state_change notification. These drivers are
updated accordingly.
The boolean is just used to emit a warning for unexpected state
transitions. It is sufficient to pass it to the deactivate function
directly for that purpose.
We might redo image transfers, but we only ever had one reference that
was implicitly removed after the transfer completed. Add a new reference
each time it is submitted and only free the last reference in the stop
handler.
For some reason we re-submitted the interrupt transfer with a timeout of
1s while the original submission was without a timeout. This looks like
typo, remove the timeout.
Annotate the USB transfer creation functions with the correct buffer
access attribute. Note that we only annotate them as read_only as the
functions may be used for sending and receiving.
Hopefully this will catch buffer overflows in drivers in the future.
Doing this avoids race conditions in testing code where the code might
try to submit errors/images before the device has been activated. This
would then (sometimes) trigger assertions in the image driver code.
The earlier image device code tried to hide deactivation from the
surrounding library. However, this does not make any sense anymore with
the early reporting feature present.
This changes the operation to complete only once the device is
deactivated. Also changed that in most cases (except for cancellation)
we wait for the finger to be removed before deactivating the device.
The driver seems to have relied on the device to be fully
deactivated and activated again for each capture. This is not the case
during enroll, and as such in can cause issues.
Try fixing this by splitting out the last few commands send to the
device and assuming that this starts the capture.
Fixes: #306
We have plenty of code paths where a transfer may be cancelled before it
is submitted. Unfortunately, libgusb up to and including version 0.3.6
are not handling that case correctly (due to libusb ignoring
cancellation on transfers that are not yet submitted).
Work around this, but do so in a somewhat lazy fashion that is not
entirely race free.
Closes: #306
Delay the open/close callbacks by 100ms so that we have a window of
opportunity for race conditions. This is needed to test certain
conditiosn in fprintd.
Adding a trailing \n to g_message, g_debug, g_warning and g_error is not
neccessary, as a newline will be added automatically by the logging
infrastructure.
The cancellable needs to be free'ed at deactivation. Also free it if we
run into a fatal error, which then in turn indicates that the device is
deactivated already.
The change_state function is called synchronously from the
image_captured callback. This means that deactivation of the device
happens during the img_cb function, causing the USB transfer to be
re-registered even though the device is already deactivating.
There are various ways to fix this, but it makes sense to directly bind
the cancellation to the deactivation. So create a cancellable that we
cancel at deactivation time, and make sure we always deactivate by going
through cancellation.
closes: #306
Image devices are simply deactivated suddenly. As such, the cancellation
logic of FpDevice is not really useful there, but the documentation was
apparently accidentally copied unmodified.
This is unlikely to happen in a real world scenario and currently breaks
running the CI test (not the umockdev based ones) while building the
flatpak. Lower the severity to avoid aborting because there is a
warning.
